diff --git a/.config b/.config index a8f14f1..aca33a5 100644 --- a/.config +++ b/.config @@ -213,14 +213,14 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8 CONFIG_RT_USING_POSIX_FS=y CONFIG_RT_USING_POSIX_DEVIO=y # CONFIG_RT_USING_POSIX_STDIO is not set -# CONFIG_RT_USING_POSIX_POLL is not set +CONFIG_RT_USING_POSIX_POLL=y # CONFIG_RT_USING_POSIX_SELECT is not set # CONFIG_RT_USING_POSIX_SOCKET is not set # CONFIG_RT_USING_POSIX_TERMIOS is not set # CONFIG_RT_USING_POSIX_AIO is not set # CONFIG_RT_USING_POSIX_MMAN is not set -# CONFIG_RT_USING_POSIX_DELAY is not set -# CONFIG_RT_USING_POSIX_CLOCK is not set +CONFIG_RT_USING_POSIX_DELAY=y +CONFIG_RT_USING_POSIX_CLOCK=y # CONFIG_RT_USING_POSIX_TIMER is not set # CONFIG_RT_USING_PTHREADS is not set # CONFIG_RT_USING_MODULE is not set @@ -228,9 +228,10 @@ CONFIG_RT_USING_POSIX_DEVIO=y # # Interprocess Communication (IPC) # -# CONFIG_RT_USING_POSIX_PIPE is not set -# CONFIG_RT_USING_POSIX_MESSAGE_QUEUE is not set -# CONFIG_RT_USING_POSIX_MESSAGE_SEMAPHORE is not set +CONFIG_RT_USING_POSIX_PIPE=y +CONFIG_RT_USING_POSIX_PIPE_SIZE=512 +CONFIG_RT_USING_POSIX_MESSAGE_QUEUE=y +CONFIG_RT_USING_POSIX_MESSAGE_SEMAPHORE=y # # Socket is in the 'Network' category @@ -238,7 +239,8 @@ CONFIG_RT_USING_POSIX_DEVIO=y # end of Interprocess Communication (IPC) # end of POSIX (Portable Operating System Interface) layer -# CONFIG_RT_USING_CPLUSPLUS is not set +CONFIG_RT_USING_CPLUSPLUS=y +# CONFIG_RT_USING_CPLUSPLUS11 is not set # end of C/C++ and POSIX layer # @@ -633,13 +635,7 @@ CONFIG_PKG_USING_SQLITE_V3193=y # CONFIG_PKG_USING_FLASH_BLOB is not set # CONFIG_PKG_USING_MLIBC is not set # CONFIG_PKG_USING_TASK_MSG_BUS is not set -CONFIG_PKG_USING_UART_FRAMEWORK=y -CONFIG_PKG_UART_FRAMEWORK_PATH="/packages/system/UartFramework" -# CONFIG_PKG_USING_UART_FRAMEWORK_V001 is not set -# CONFIG_PKG_USING_UART_FRAMEWORK_V004 is not set -# CONFIG_PKG_USING_UART_FRAMEWORK_V100 is not set -CONFIG_PKG_USING_UART_FRAMEWORK_LATEST_VERSION=y -CONFIG_PKG_UART_FRAMEWORK_VER="latest" +# CONFIG_PKG_USING_UART_FRAMEWORK is not set # CONFIG_PKG_USING_SFDB is not set # CONFIG_PKG_USING_RTP is not set # CONFIG_PKG_USING_REB is not set @@ -858,6 +854,7 @@ CONFIG_PKG_UART_FRAMEWORK_VER="latest" # CONFIG_PKG_USING_MLX90393 is not set # CONFIG_PKG_USING_MLX90392 is not set # CONFIG_PKG_USING_MLX90394 is not set +# CONFIG_PKG_USING_MLX90396 is not set # CONFIG_PKG_USING_MLX90397 is not set # CONFIG_PKG_USING_MS5611 is not set # CONFIG_PKG_USING_MAX31865 is not set diff --git a/.cproject b/.cproject index df1c29d..f6d6888 100644 --- a/.cproject +++ b/.cproject @@ -95,6 +95,8 @@ + + @@ -143,396 +145,10 @@ - + + + @@ -892,7 +522,7 @@ - + diff --git a/.project b/.project index ece7f83..8dbbf21 100644 --- a/.project +++ b/.project @@ -20,6 +20,7 @@ org.eclipse.cdt.core.cnature + org.eclipse.cdt.core.ccnature org.rt-thread.studio.rttnature org.eclipse.cdt.managedbuilder.core.managedBuildNature org.eclipse.cdt.managedbuilder.core.ScannerConfigNature diff --git a/.settings/.rtmenus b/.settings/.rtmenus index c35ae97..f420cad 100644 Binary files a/.settings/.rtmenus and b/.settings/.rtmenus differ diff --git a/.settings/language.settings.xml b/.settings/language.settings.xml index ec88f73..1aaff07 100644 --- a/.settings/language.settings.xml +++ b/.settings/language.settings.xml @@ -5,7 +5,7 @@ - + diff --git a/applications/DATA/DATA_comm.c b/applications/DATA/DATA_comm.c index e75c88b..17827a8 100644 --- a/applications/DATA/DATA_comm.c +++ b/applications/DATA/DATA_comm.c @@ -23,6 +23,9 @@ rt_mq_t proc_mq; char cjson_falg=0;//是否解析cjson char *json_buffer=NULL; + +// + /** * 截取两个指定子串之间的内容 * @param src 源字符串 @@ -117,58 +120,63 @@ void pasre_DAT(const char *api, const char *json_str) } else if (strcmp(api, "SC810") == 0) { - char STime[25]; - char pTime[10]; + char Work_[25]; + char Dye_[25]; + char STime_[25]; + char pTime_[10]; // 字符串赋值 - GET_STRING(Work, root, "Work", sizeof(Work)); - GET_STRING(Dye, root, "Dye", sizeof(Dye)); - GET_STRING(STime, root, "STime", sizeof(STime)); - GET_STRING(pTime, root, "Time", sizeof(pTime)); + GET_STRING(Work_, root, "Work", sizeof(Work_)); + GET_STRING(Dye_, root, "Dye", sizeof(Dye_)); + GET_STRING(STime_, root, "STime", sizeof(STime_)); + GET_STRING(pTime_, root, "Time", sizeof(pTime_)); // 定义足够大的缓冲区 char sql[512] = {0}; // 初始化为 0 // 安全格式化 rt_snprintf(sql, sizeof(sql), - "INSERT INTO WorkorderSteps(WorkOrder,DYELOT,ReDye,StartTime,Time)" - "VALUES('%s','%s',0,%s,%s,)", - Work, Dye, STime,pTime); + "INSERT INTO WorkOrder(WorkOrder,DYELOT,ReDye,StartTime,Time)" + "VALUES('%s','%s',0,'%s','%s')", + Work_, Dye_, STime_,pTime_); if( db_send_command(DB_CMD_EXEC, sql, 500)==RT_EOK) // { - cJSON_AddItemToObject(dat,"Work",cJSON_CreateString(Work)); - cJSON_AddItemToObject(dat,"ReDye",cJSON_CreateNumber(Redye)); + cJSON_AddItemToObject(dat,"Work",cJSON_CreateString(Work_)); + cJSON_AddItemToObject(dat,"ReDye",cJSON_CreateNumber(0)); } } else if (strcmp(api, "SC811") == 0) {//工单明细 + char Work_[25]; + char Dye_[25]; + char StepID_[4]; + char SIDS1_[4]; + int StepN_; + int P1_; + int P2_; + int P3_; + int P4_; + int P5_; + int P1S1_; + int P2S1_; + int P3S1_; + int P4S1_; + int P5S1_; // 字符串赋值 - GET_STRING(Work, root, "Work", sizeof(Work)); - GET_STRING(Dye, root, "Dye", sizeof(Dye)); - GET_STRING(StepID, root, "StepID", sizeof(StepID)); - GET_STRING(SIDS1, root, "SIDS1", sizeof(SIDS1)); - //GET_STRING(SIDS2, root, "SIDS2", sizeof(SIDS2)); - //GET_STRING(SIDS3, root, "SIDS3", sizeof(SIDS3)); + GET_STRING(Work_, root, "Work", sizeof(Work_)); + GET_STRING(Dye_, root, "Dye", sizeof(Dye_)); + GET_STRING(StepID_, root, "StepID", sizeof(StepID_)); + GET_STRING(SIDS1_, root, "SIDS1", sizeof(SIDS1_)); //整数 - GET_INT_FROM_ANY(StepN, root, "Step", 0); - GET_INT_FROM_ANY(P1, root, "P1", 0); - GET_INT_FROM_ANY(P2, root, "P2", 0); - GET_INT_FROM_ANY(P3, root, "P3", 0); - GET_INT_FROM_ANY(P4, root, "P4", 0); - GET_INT_FROM_ANY(P5, root, "P5", 0); - GET_INT_FROM_ANY(P1S1, root, "P1S1",0); - GET_INT_FROM_ANY(P2S1, root, "P2S1",0); - GET_INT_FROM_ANY(P3S1, root, "P3S1",0); - GET_INT_FROM_ANY(P4S1, root, "P4S1",0); - GET_INT_FROM_ANY(P5S1, root, "P5S1",0); - //GET_INT_FROM_ANY(P1S2, root, "P1S2",0); - //GET_INT_FROM_ANY(P2S2, root, "P2S2",0); - //GET_INT_FROM_ANY(P3S2, root, "P3S2",0); - //GET_INT_FROM_ANY(P4S2, root, "P4S2",0); - //GET_INT_FROM_ANY(P5S2, root, "P5S2",0); - //GET_INT_FROM_ANY(P1S3, root, "P1S3",0); - //GET_INT_FROM_ANY(P2S3, root, "P2S3",0); - //GET_INT_FROM_ANY(P3S3, root, "P3S3",0); - //GET_INT_FROM_ANY(P4S3, root, "P4S3",0); - //GET_INT_FROM_ANY(P5S3, root, "P5S3",0); + GET_INT_FROM_ANY(StepN_, root, "Step", 0); + GET_INT_FROM_ANY(P1_, root, "P1", 0); + GET_INT_FROM_ANY(P2_, root, "P2", 0); + GET_INT_FROM_ANY(P3_, root, "P3", 0); + GET_INT_FROM_ANY(P4_, root, "P4", 0); + GET_INT_FROM_ANY(P5_, root, "P5", 0); + GET_INT_FROM_ANY(P1S1_, root, "P1S1",0); + GET_INT_FROM_ANY(P2S1_, root, "P2S1",0); + GET_INT_FROM_ANY(P3S1_, root, "P3S1",0); + GET_INT_FROM_ANY(P4S1_, root, "P4S1",0); + GET_INT_FROM_ANY(P5S1_, root, "P5S1",0); // 定义足够大的缓冲区 char sql[512] = {0}; // 初始化为 0 @@ -176,41 +184,124 @@ void pasre_DAT(const char *api, const char *json_str) // 安全格式化 rt_snprintf(sql, sizeof(sql), "INSERT INTO WorkorderSteps(WorkOrder,DYELOT,ReDye,Step,StepID,P1,P2,P3,P4,P5,StepID_S1,P1_S1,P2_S1,P3_S1,P4_S1,P5_S1)" - "VALUES('%s','%s',0,%d,%s,%d,%d,%d,%d,%d,'%s',%d,%d,%d,%d,%d)", - Work, Dye, StepN,StepID,P1, P2, P3, P4, P5,SIDS1,P1S1,P2S1,P3S1,P4S1,P5S1 ); + "VALUES('%s','%s',0,%d,'%s',%d,%d,%d,%d,%d,'%s',%d,%d,%d,%d,%d)", + Work_, Dye_, StepN_,StepID_,P1_, P2_, P3_, P4_, P5_,SIDS1_,P1S1_,P2S1_,P3S1_,P4S1_,P5S1_ ); if( db_send_command(DB_CMD_EXEC, sql, 500)==RT_EOK) // { - cJSON_AddItemToObject(dat,"Work",cJSON_CreateString(Work)); - cJSON_AddItemToObject(dat,"ReDye",cJSON_CreateNumber(Redye)); - cJSON_AddItemToObject(dat,"Step",cJSON_CreateNumber(StepN)); + cJSON_AddItemToObject(dat,"Work",cJSON_CreateString(Work_)); + cJSON_AddItemToObject(dat,"ReDye",cJSON_CreateNumber(0)); + cJSON_AddItemToObject(dat,"Step",cJSON_CreateNumber(StepN_)); } } - else if (strcmp(api, "SC812") == 0) { - //工单设定 + else if (strcmp(api, "SC812") == 0) + {//工单设定 + char Work_[25]; + int Pump_; + int Blower_; + int ClothWheel_; + int Swing_; + int Nozzle_; + // 字符串赋值 + GET_STRING(Work_, root, "WorkOrder", sizeof(Work_)); + //整数 + GET_INT_FROM_ANY(Pump_, root, "PumpSpeed", 0); + GET_INT_FROM_ANY(Blower_, root, "Blower", 0); + GET_INT_FROM_ANY(ClothWheel_, root, "ClothWheel", 0); + GET_INT_FROM_ANY(Swing_, root, "Swing", 0); + GET_INT_FROM_ANY(Nozzle_, root, "Nozzle", 0); + + // 定义足够大的缓冲区 + char sql[512] = {0}; // 初始化为 0 + // 安全格式化 + rt_snprintf(sql, sizeof(sql), + "INSERT OR IGNORE INTO WorkOrderSet(WorkOrder,ReDye,PumpSpeed,Blower,ClothWheel,Swing,Nozzle)" + "VALUES('%s',0,%d,%d,%d,%d,%d)", + Work_, Pump_,Blower_,ClothWheel_, Swing_, Nozzle_); + if( db_send_command(DB_CMD_EXEC, sql, 500)==RT_EOK) // + { + cJSON_AddItemToObject(dat,"Work",cJSON_CreateString(Work_)); + cJSON_AddItemToObject(dat,"ReDye",cJSON_CreateNumber(0)); + } } - else if (strcmp(api, "SC813") == 0) { - printf("Processing:SC813\n"); + else if (strcmp(api, "SC813") == 0) + {//领料单插入 + char Work_[25]; + char Dye_[25]; + char ProductCode_[15]; + char ProductName_[15]; + char Grams_[8]; + int ProductType_; + int StepN_; + //字符 + GET_STRING(Work_, root, "Work", sizeof(Work_)); + GET_STRING(Dye_, root, "Dye", sizeof(Dye_)); + GET_STRING(ProductName_, root, "ProductName", sizeof(ProductName_)); + GET_STRING(ProductCode_, root, "ProductCode", sizeof(ProductCode_)); + GET_STRING(Grams_, root, "Grams", sizeof(Grams_)); + //整数 + GET_INT_FROM_ANY(StepN_, root, "Step", 0); + GET_INT_FROM_ANY(ProductType_, root, "ProductType", 0); + + // 定义足够大的缓冲区 + char sql[512] = {0}; // 初始化为 0 + // 安全格式化 + rt_snprintf(sql, sizeof(sql), + "INSERT OR IGNORE INTO Dyelot(WorkOrder,Dyelot,ReDye,Step,ProductCode,ProductName,ProductType,Grams)" + "VALUES('%s','%s',0,%d,%s,%s,%d,%s)", + Work_, Dye_,StepN_,ProductCode_,ProductName_ ,ProductType_,Grams_); + if( db_send_command(DB_CMD_EXEC, sql, 500)==RT_EOK) // + { + cJSON_AddItemToObject(dat,"Work",cJSON_CreateString(Work_)); + cJSON_AddItemToObject(dat,"Dye",cJSON_CreateString(Dye_)); + cJSON_AddItemToObject(dat,"ReDye",cJSON_CreateNumber(0)); + cJSON_AddItemToObject(dat,"Step",cJSON_CreateNumber(StepN_)); + } } - else if (strcmp(api, "SC820") == 0) { - printf("Processing:SC820\n"); + else if (strcmp(api, "SC820") == 0) + {//设置系统时间 + char Time_[25]; + + GET_STRING(Time_, root, "Work", sizeof(Time_)); + + cJSON_AddItemToObject(dat,"time",cJSON_CreateString("systime")); } - else if (strcmp(api, "SC821") == 0) { + else if (strcmp(api, "SC821") == 0) + { printf("Processing:SC821\n"); } - else if (strcmp(api, "SC822") == 0) { + else if (strcmp(api, "SC822") == 0) + { printf("Processing:SC822\n"); } - else if (strcmp(api, "SC827") == 0) { + else if (strcmp(api, "SC827") == 0) + { printf("Processing:SC827\n"); } - else if (strcmp(api, "SC828") == 0) { + else if (strcmp(api, "SC828") == 0) + { printf("Processing:SC828\n"); } - else if (strcmp(api, "SC829") == 0) { - printf("Processing:SC829\n"); + else if (strcmp(api, "SC829") == 0) + {//锁定自动 + char NAME_[4]; + char VALUE_[4]; + GET_STRING(NAME_, root, "NAME", sizeof(NAME_)); + GET_STRING(VALUE_, root, "VALUE", sizeof(VALUE_)); + + if (strcmp(NAME_, "LOCK") == 0) { + if (strcmp(VALUE_, "True") == 0) + {MACHINE_LOCK=1;}else{MACHINE_LOCK=0;} + } + if (strcmp(NAME_, "AUTO") == 0) { + if (strcmp(VALUE_, "True") == 0) + {MACHINE_AUTO=1;}else{MACHINE_AUTO=0;} + } + + cJSON_AddItemToObject(dat,"NAME",cJSON_CreateString(NAME_)); + cJSON_AddItemToObject(dat,"VALUE",cJSON_CreateString(VALUE_)); } - else if (strcmp(api, "SC830") == 0) { - //当前信息 + else if (strcmp(api, "SC830") == 0) + {//当前信息 cJSON_AddItemToObject(dat,"ERR",cJSON_CreateBool(MACHINE_ERR)); cJSON_AddItemToObject(dat,"LOCK",cJSON_CreateBool(MACHINE_LOCK)); cJSON_AddItemToObject(dat,"Status",cJSON_CreateString(Message)); @@ -382,7 +473,7 @@ int data_comm_init(void) } rt_thread_t tid = rt_thread_create("data_comm", proc_thread_entry, RT_NULL, - 1024*4, 20, 10); + 1024*6, 20, 10); if (tid != RT_NULL) { rt_thread_startup(tid); diff --git a/applications/DATA/DATA_uart.c b/applications/DATA/DATA_uart.c index 47d5566..afb06a4 100644 --- a/applications/DATA/DATA_uart.c +++ b/applications/DATA/DATA_uart.c @@ -133,15 +133,42 @@ static rt_err_t uart_rx_ind(rt_device_t dev, rt_size_t size) return RT_EOK; } -// 从环形缓冲区提取一行 +// 从环形缓冲区提取一行rt_kprintf("%s\n",buf); static int get_line(char *buf, int maxlen) { - int len = rt_ringbuffer_get(&rx_rb, (rt_uint8_t*)buf, maxlen - 1); - if (len > 0) { - buf[len] = '\0'; - return len; - } - return 0; + int len = 0; + rt_uint8_t ch; + + // 逐字节读取，直到遇到 '\n' 或缓冲区满 + while (len < maxlen - 1) + { + // 从环形缓冲区读一个字节 + if (rt_ringbuffer_getchar(&rx_rb, &ch) == 0) + { + // 缓冲区为空，无数据可读 + break; + } + + buf[len++] = ch; + + // 检查是否为行结束符 + if (ch == '\n') + { + buf[len] = '\0'; // 添加字符串结束符 + return len; // 返回完整行长度 + } + } + + // 如果没有遇到 '\n'，说明不是完整的一行 + // 我们可以选择：把已读的数据放回 ringbuffer，或丢弃（推荐放回） + // 这里选择：把所有读取的字符重新放回 ringbuffer + if (len > 0) + { + // 将已读取但未构成完整行的数据放回 ringbuffer 开头 + rt_ringbuffer_put(&(rx_rb), (rt_uint8_t*)buf, len); + } + + return 0; // 未收到完整行，返回 0 } // 启动 UART 线程 diff --git a/applications/DATA/Variable.c b/applications/DATA/Variable.c index 2716314..aaf4a6c 100644 --- a/applications/DATA/Variable.c +++ b/applications/DATA/Variable.c @@ -13,6 +13,7 @@ char machine_ID[3] = "23"; // 状态标志 char MACHINE_ERR = 0; char MACHINE_LOCK = 0; +char MACHINE_AUTO = 0; char MACHINE_CALL = 0; char MACHINE_USER = 0; diff --git a/applications/DATA/Variable.h b/applications/DATA/Variable.h index c11f5fd..ddbb2f9 100644 --- a/applications/DATA/Variable.h +++ b/applications/DATA/Variable.h @@ -13,6 +13,7 @@ extern char machine_ID[3]; // ===== 布尔变量 ===== extern char MACHINE_ERR; extern char MACHINE_LOCK; +extern char MACHINE_AUTO; extern char MACHINE_CALL; extern char MACHINE_USER; diff --git a/applications/DBSQL/DB_SQLite.c b/applications/DBSQL/DB_SQLite.c index aba6272..d9d73f5 100644 --- a/applications/DBSQL/DB_SQLite.c +++ b/applications/DBSQL/DB_SQLite.c @@ -17,7 +17,7 @@ #define DB_NAME "/SC828.db" int db_HelperInit; rt_mq_t db_mq = RT_NULL; // -sqlite3 **db; +sqlite3 *db; // 消息队列对象与缓冲区（静态分配） //static struct rt_mq db_mq; @@ -45,7 +45,7 @@ static const char *sql_upgrade_workorder_set = "CREATE TABLE WorkOrderSet (WorkOrder VARCHAR,ReDye INT DEFAULT (0),PumpSpeed INT,Blower INT,Swing INT,ClothWheel INT,Nozzle INT); "; static const char *sql_upgrade_workorder = - "CREATE TABLE WorkOrder (WorkOrder VARCHAR,Dyelot VARCHAR,ReDyeINT DEFAULT (0),ProgramNameVARCHAR,StartTime DATETIME,EndTime DATETIME," + "CREATE TABLE WorkOrder (WorkOrder VARCHAR,Dyelot VARCHAR,ReDye INT DEFAULT (0),ProgramName VARCHAR,StartTime DATETIME,EndTime DATETIME," "Time TEXT,lock INT,State INT,ProgramID VARCHAR,Machines VARCHAR,color VARCHAR,ColorNumber VARCHAR,Client VARCHAR,ClothWeight VARCHAR," "ClothSpecies VARCHAR,BathRatio VARCHAR,Total VARCHAR,USER VARCHAR,ColorName VARCHAR,Remark TEXT); "; @@ -183,54 +183,67 @@ void close_db_immediately(void) { void db_sqlite_init_full(void) { if (access(DB_NAME, F_OK) == 0) + {//打开文件 + if (sqlite3_open(DB_NAME, &db) == 0) { - rt_kprintf("DB open\n"); - if (db_connect(DB_NAME) == RT_EOK){ - if(db_table_is_exist("WorkorderSteps")<=0){ - if(db_create_database(sql_upgrade_workorder_steps)==0) - {rt_kprintf("WorkorderSteps Created successfully \n");}else{rt_kprintf("WorkorderSteps Creation failed \n");} - } - if(db_table_is_exist("WorkOrderSet")<=0){ - if(db_create_database(sql_upgrade_workorder_set)==0) - {rt_kprintf("WorkOrderSet Created successfully \n");}else{rt_kprintf("WorkOrderSet Creation failed \n");} - } - if(db_table_is_exist("WorkOrder")<=0){ - if(db_create_database(sql_upgrade_workorder)==0) - {rt_kprintf("WorkOrder Created successfully \n");}else{rt_kprintf("WorkOrder Creation failed \n");} - } - if(db_table_is_exist("RUN")<=0){ - if(db_create_database(sql_upgrade_run_table)==0) - {rt_kprintf("RUN Created successfully \n");}else{rt_kprintf("RUN Creation failed \n");} - } - if(db_table_is_exist("Dyelot")<=0){ - if(db_create_database(sql_upgrade_dyelot_table)==0) - {rt_kprintf("Dyelot Created successfully \n");}else{rt_kprintf("Dyelot Creation failed \n");} - } - if(db_table_is_exist("IOLog")<=0){ - if(db_create_database(sql_upgrade_iolog_table)==0) - {rt_kprintf("IOLog Created successfully \n");}else{rt_kprintf("IOLog Creation failed \n");} - } - if(db_table_is_exist("Chart")<=0){ - if(db_create_database(sql_upgrade_chart_table)==0) - {rt_kprintf("Chart Created successfully \n");}else{rt_kprintf("Chart Creation failed \n");} - } - }else{ - rt_kprintf("DB ok\n"); - db_connect(DB_NAME); + rt_kprintf("[DataBASE]DB open\n"); + //检查表格 + if(db_table_is_exist("WorkorderSteps")==0){ + rt_kprintf("[DataBASE]WorkorderSteps not exist \n"); + if(sqlite3_exec(db,sql_upgrade_workorder_steps, 0, 0, 0)==0) + {rt_kprintf("[DataBASE]WorkorderSteps Created successfully \n");}else{rt_kprintf("[DataBASE]WorkorderSteps Creation failed \n");} + } + if(db_table_is_exist("WorkOrderSet")==0){ + rt_kprintf("[DataBASE]WorkOrderSet not exist \n"); + if(sqlite3_exec(db,sql_upgrade_workorder_set, 0, 0, 0)==0) + {rt_kprintf("[DataBASE]WorkOrderSet Created successfully \n");}else{rt_kprintf("[DataBASE]WorkOrderSet Creation failed \n");} + } + if(db_table_is_exist("WorkOrder")==0){ + rt_kprintf("[DataBASE]WorkOrder not exist \n"); + if(sqlite3_exec(db,sql_upgrade_workorder, 0, 0, 0)==0) + {rt_kprintf("[DataBASE]WorkOrder Created successfully \n");}else{rt_kprintf("[DataBASE]WorkOrder Creation failed \n");} + } + if(db_table_is_exist("RUN")==0){ + rt_kprintf("[DataBASE]RUN not exist \n"); + if(sqlite3_exec(db,sql_upgrade_run_table, 0, 0, 0)==0) + {rt_kprintf("[DataBASE]RUN Created successfully \n");}else{rt_kprintf("[DataBASE]RUN Creation failed \n");} + } + if(db_table_is_exist("Dyelot")==0){ + rt_kprintf("[DataBASE]Dyelot not exist \n"); + if(sqlite3_exec(db,sql_upgrade_dyelot_table, 0, 0, 0)==0) + {rt_kprintf("[DataBASE]Dyelot Created successfully \n");}else{rt_kprintf("[DataBASE]Dyelot Creation failed \n");} + } + if(db_table_is_exist("IOLog")==0){ + rt_kprintf("[DataBASE]IOLog not exist \n"); + if(sqlite3_exec(db,sql_upgrade_iolog_table, 0, 0, 0)==0) + {rt_kprintf("[DataBASE]IOLog Created successfully \n");}else{rt_kprintf("[DataBASE]IOLog Creation failed \n");} + } + if(db_table_is_exist("Chart")==0){ + rt_kprintf("[DataBASE]Chart not exist \n"); + if(sqlite3_exec(db,sql_upgrade_chart_table, 0, 0, 0)==0) + {rt_kprintf("[DataBASE]Chart Created successfully \n");}else{rt_kprintf("[DataBASE]Chart Creation failed \n");} } - }else{ - rt_kprintf("DB open failed \n"); - sqlite3_open(DB_NAME, db); - //创建表 - db_create_database(sql_upgrade_workorder_steps); - db_create_database(sql_upgrade_workorder_set); - db_create_database(sql_upgrade_workorder); - db_create_database(sql_upgrade_run_table); - db_create_database(sql_upgrade_dyelot_table); - db_create_database(sql_upgrade_iolog_table); - db_create_database(sql_upgrade_chart_table); + rt_kprintf("[DataBASE]DB not open\n"); } + }else{ + rt_kprintf("DB open failed \n"); + sqlite3_open(DB_NAME, &db); + if(sqlite3_exec(db,sql_upgrade_workorder_steps, 0, 0, 0)==0) + {rt_kprintf("[DataBASE]WorkorderSteps Created successfully \n");}else{rt_kprintf("[DataBASE]WorkorderSteps Creation failed \n");} + if(sqlite3_exec(db,sql_upgrade_workorder_set, 0, 0, 0)==0) + {rt_kprintf("[DataBASE]WorkOrderSet Created successfully \n");}else{rt_kprintf("[DataBASE]WorkOrderSet Creation failed \n");} + if(sqlite3_exec(db,sql_upgrade_workorder, 0, 0, 0)==0) + {rt_kprintf("[DataBASE]WorkOrder Created successfully \n");}else{rt_kprintf("[DataBASE]WorkOrder Creation failed \n");} + if(sqlite3_exec(db,sql_upgrade_run_table, 0, 0, 0)==0) + {rt_kprintf("[DataBASE]RUN Created successfully \n");}else{rt_kprintf("[DataBASE]RUN Creation failed \n");} + if(sqlite3_exec(db,sql_upgrade_dyelot_table, 0, 0, 0)==0) + {rt_kprintf("[DataBASE]Dyelot Created successfully \n");}else{rt_kprintf("[DataBASE]Dyelot Creation failed \n");} + if(sqlite3_exec(db,sql_upgrade_iolog_table, 0, 0, 0)==0) + {rt_kprintf("[DataBASE]IOLog Created successfully \n");}else{rt_kprintf("[DataBASE]IOLog Creation failed \n");} + if(sqlite3_exec(db,sql_upgrade_chart_table, 0, 0, 0)==0) + {rt_kprintf("[DataBASE]Chart Created successfully \n");}else{rt_kprintf("[DataBASE]Chart Creation failed \n");} + } } /** diff --git a/applications/LVGL/lv_port_disp.c b/applications/LVGL/lv_port_disp.c new file mode 100644 index 0000000..0e72892 --- /dev/null +++ b/applications/LVGL/lv_port_disp.c @@ -0,0 +1,71 @@ +/* + * Copyright (c) 2006-2021, RT-Thread Development Team + * + * SPDX-License-Identifier: Apache-2.0 + * + * Change Logs: + * Date Author Notes + * 2025-10-27 Administrator the first version + */ + +#include "lvgl.h" +#include "lv_port_disp.h" +#include "ssd1963.h" + +// 屏幕分辨率（请根据实际 LCD 调整） +#define LCD_WIDTH 480 +#define LCD_HEIGHT 272 + +// 绘图缓冲区：建议为屏幕宽度 * 10 行 +static lv_color_t draw_buf1[LCD_WIDTH * 10]; // 前缓冲 +static lv_color_t draw_buf2[LCD_WIDTH * 10]; // 后缓冲（可选，用于双缓冲） + +// LVGL 绘图缓冲区描述符 +static lv_disp_draw_buf_t draw_buf; + +// 刷屏完成回调 +static void disp_flush(lv_disp_drv_t *disp_drv, const lv_area_t *area, lv_color_t *color_p) +{ + // 设置 SSD1963 显示窗口 + ssd1963_set_window(area->x1, area->y1, area->x2, area->y2); + + // 写入像素数据 + uint32_t size = (area->x2 - area->x1 + 1) * (area->y2 - area->y1 + 1); + for (uint32_t i = 0; i < size; i++) { + SSD1963_DATA_ADDR = color_p[i].full; // 使用 FSMC 写入 + } + + // ✅ 必须调用！通知 LVGL 刷屏已完成 + lv_disp_flush_ready(disp_drv); +} + +/** + * @brief 初始化 LVGL 显示驱动 + */ +void lv_port_disp_init(void) +{ + // 1. 初始化 FSMC 总线（由 STM32CubeMX 生成） + // MX_FSMC_Init(); + + // 2. 初始化 SSD1963 控制器 + ssd1963_init(); // ✅ 使用 ssd1963.h 中的初始化函数 + + // 注释掉重复的 lcd_init() + // lcd_init(); // ❌ 删除：与 ssd1963_init() 重复或冲突 + + // 3. 初始化 LVGL 的绘图缓冲区 + // 参数：缓冲区结构体、第一个缓冲区、第二个缓冲区（可选）、总大小（像素数） + lv_disp_draw_buf_init(&draw_buf, draw_buf1, draw_buf2, LCD_WIDTH * 10); + + // 4. 初始化显示驱动 + static lv_disp_drv_t disp_drv; + lv_disp_drv_init(&disp_drv); + + disp_drv.hor_res = LCD_WIDTH; // 水平分辨率 + disp_drv.ver_res = LCD_HEIGHT; // 垂直分辨率 + disp_drv.flush_cb = disp_flush; // 刷屏回调 + disp_drv.draw_buf = &draw_buf; // 绑定缓冲区 ✅ 必须赋值！ + + // 5. 注册显示设备到 LVGL + lv_disp_drv_register(&disp_drv); +} diff --git a/applications/LVGL/lv_port_disp.h b/applications/LVGL/lv_port_disp.h new file mode 100644 index 0000000..1c3675d --- /dev/null +++ b/applications/LVGL/lv_port_disp.h @@ -0,0 +1,32 @@ +/* + * Copyright (c) 2006-2021, RT-Thread Development Team + * + * SPDX-License-Identifier: Apache-2.0 + * + * Change Logs: + * Date Author Notes + * 2025-10-27 Administrator the first version + */ +#ifndef APPLICATIONS_LV_PORT_DISP_H_ +#define APPLICATIONS_LV_PORT_DISP_H_ + +#ifdef __cplusplus +extern "C" { +#endif +#define LV_COLOR_DEPTH 16 +#define LV_HOR_RES_MAX 480 +#define LV_VER_RES_MAX 272 +#define LV_DPI 130 +void ssd1963_init(void); +void ssd1963_set_window(uint16_t x1, uint16_t y1, uint16_t x2, uint16_t y2); +/** + * @brief 初始化 LVGL 显示驱动 + * 调用 ssd1963_init() 并注册到 LVGL + */ +void lv_port_disp_init(void); + +#ifdef __cplusplus +} /* extern "C" */ +#endif + +#endif /* APPLICATIONS_LV_PORT_DISP_H_ */ diff --git a/applications/LVGL/ssd1963.c b/applications/LVGL/ssd1963.c new file mode 100644 index 0000000..1e66758 --- /dev/null +++ b/applications/LVGL/ssd1963.c @@ -0,0 +1,248 @@ +/* + * Copyright (c) 2006-2021, RT-Thread Development Team + * + * SPDX-License-Identifier: Apache-2.0 + * + * Change Logs: + * Date Author Notes + * 2025-10-26 Administrator the first version + */ +/** + * @file ssd1963.c + * @brief SSD1963 TFT LCD Controller Driver for STM32F407 + FSMC + RT-Thread + * @author Qwen (Generated for RTT) + * @date 2025-10-26 + */ + +#include "rtthread.h" +#include "rtdevice.h" +#include "ssd1963.h" // 确保路径正确 +#include + + +// ==================== 引脚定义 (根据你的硬件修改) ==================== +#define LCD_RST_PIN GET_PIN(B,2) // 复位引脚 +#define LCD_BL_PIN GET_PIN(B,0) // 背光控制引脚 (PWM) + +// ==================== SSD1963 命令定义 ==================== +#define SSD1963_NOP 0x00 +#define SSD1963_SOFT_RESET 0x01 +#define SSD1963_GET_PWR_MODE 0x0A +#define SSD1963_GET_ADDR_MODE 0x0B +#define SSD1963_GET_PIX_FORMAT 0x0C +#define SSD1963_GET_SIG_MODE 0x0D +#define SSD1963_GET_DIAGNOSTIC 0x0F +#define SSD1963_ENTER_SLEEP 0x10 +#define SSD1963_EXIT_SLEEP 0x11 +#define SSD1963_ENTER_PARTIAL 0x12 +#define SSD1963_ENTER_NORMAL 0x13 +#define SSD1963_EXIT_INVERT 0x20 +#define SSD1963_ENTER_INVERT 0x21 +#define SSD1963_SET_GAMMA 0x26 +#define SSD1963_BLANK_OFF 0x28 +#define SSD1963_BLANK_ON 0x29 +#define SSD1963_CLEAR_WINDOW 0x2D +#define SSD1963_WRITE_MEMORY_START 0x2C +#define SSD1963_READ_MEMORY 0x2E +#define SSD1963_SET_PARTIAL_AREA 0x30 +#define SSD1963_SET_SCROLL_AREA 0x33 +#define SSD1963_SET_TEAR_OFF 0x34 +#define SSD1963_SET_TEAR_ON 0x35 +#define SSD1963_MEM_ACCESS_CTRL 0x36 +#define SSD1963_VERTICAL_SCROLL 0x37 +#define SSD1963_IDLE_OFF 0x38 +#define SSD1963_IDLE_ON 0x39 +#define SSD1963_SET_PIX_FORMAT 0x3A +#define SSD1963_SET_IMAGE_FUNC 0x3B +#define SSD1963_WRITE_MEMORY_CONTINUE 0x3C +#define SSD1963_READ_MEMORY_CONTINUE 0x3E +#define SSD1963_SET_COLUMN 0x2A +#define SSD1963_SET_ROW 0x2B +#define SSD1963_SET_XY 0x2C +#define SSD1963_SET_TE_LINE 0x40 +#define SSD1963_GET_SCAN_LINE 0x45 +#define SSD1963_GET_HOR_PERIOD 0x44 +#define SSD1963_SET_PLL_MN 0xE0 +#define SSD1963_SET_PLL 0xE2 +#define SSD1963_SET_PLL_ENABLE 0xE3 +#define SSD1963_SET_DESKTOP_START 0xEA + +// ==================== 基础操作函数 ==================== + +/** + * @brief 写入命令 + * @param cmd 命令字节 + */ +static void ssd1963_write_cmd(uint8_t cmd) +{ + SSD1963_CMD_ADDR = cmd; +} + +/** + * @brief 写入数据字节 + * @param data 数据字节 + */ +static void ssd1963_write_data(uint8_t data) +{ + SSD1963_DATA_ADDR = data; +} + +/** + * @brief 写入 16 位数据 + * @param data 16 位数据 + */ +static void ssd1963_write_data_16(uint16_t data) +{ + SSD1963_DATA_ADDR = data; +} + +/** + * @brief 写入 32 位数据（分 4 次） + * @param data 32 位数据 + */ +static void ssd1963_write_data_long(uint32_t data) +{ + ssd1963_write_data((data >> 24) & 0xFF); + ssd1963_write_data((data >> 16) & 0xFF); + ssd1963_write_data((data >> 8) & 0xFF); + ssd1963_write_data(data & 0xFF); +} + +// ==================== 显示设置函数 ==================== + +/** + * @brief 设置显示窗口（GRAM 区域） + * @param x1 起始 X 坐标 + * @param y1 起始 Y 坐标 + * @param x2 结束 X 坐标 + * @param y2 结束 Y 坐标 + */ +void ssd1963_set_window(uint16_t x1, uint16_t y1, uint16_t x2, uint16_t y2) +{ + ssd1963_write_cmd(SSD1963_SET_COLUMN); + ssd1963_write_data_long(x1); + ssd1963_write_data_long(x2); + + ssd1963_write_cmd(SSD1963_SET_ROW); + ssd1963_write_data_long(y1); + ssd1963_write_data_long(y2); + + ssd1963_write_cmd(SSD1963_WRITE_MEMORY_START); // 准备写 GRAM +} + +/** + * @brief 清屏 + * @param color 填充颜色 (RGB565) + */ +void ssd1963_clear(rt_uint16_t color) +{ + uint32_t i; + uint32_t total_pixels = 480 * 272; // 根据实际分辨率调整 + + ssd1963_set_window(0, 0, 479, 271); + for (i = 0; i < total_pixels; i++) + { + SSD1963_DATA_ADDR = color; + } +} + +// ==================== 初始化函数 ==================== + +/** + * @brief 初始化 SSD1963 控制器 + * 支持 480x272 分辨率，16位色 + */ +void ssd1963_init(void) +{ + rt_pin_mode(LCD_RST_PIN, PIN_MODE_OUTPUT); + + // 复位 + rt_pin_write(LCD_RST_PIN, PIN_LOW); + rt_thread_mdelay(100); + rt_pin_write(LCD_RST_PIN, PIN_HIGH); + rt_thread_mdelay(150); + + // 软件复位 + ssd1963_write_cmd(SSD1963_SOFT_RESET); + rt_thread_mdelay(10); + + // ============= 设置 PLL ============= + // PLL = (CLK * (M+1)) / (N+1), 典型主频 10MHz 输入 + ssd1963_write_cmd(SSD1963_SET_PLL_MN); + ssd1963_write_data(0x23); // M = 35, M+1=36 + ssd1963_write_data(0x02); // N = 2, N+1=3 + ssd1963_write_data(0x04); // DIV = 4 + + // 启用 PLL + ssd1963_write_cmd(SSD1963_SET_PLL_ENABLE); + ssd1963_write_data(0x01); // 开启 PLL + rt_thread_mdelay(1); + ssd1963_write_cmd(SSD1963_SET_PLL_ENABLE); + ssd1963_write_data(0x03); // 锁定 PLL + rt_thread_mdelay(5); + + // 选择 PLL 作为系统时钟 + ssd1963_write_cmd(SSD1963_SET_PLL); + ssd1963_write_data(0x03); + + // ============= 设置 LCD 模式 ============= + ssd1963_write_cmd(0xB0); // Set LCD Mode + ssd1963_write_data(0x20); // 24-bit/pixel, TFT 模式 + ssd1963_write_data(0x01); // HSYNC+VSYNC 控制 + ssd1963_write_data_long(480); // LCD 宽度 + ssd1963_write_data_long(272); // LCD 高度 + ssd1963_write_data_long(41); // HSYNC 脉冲宽度 (41) + ssd1963_write_data_long(2); // HSYNC 起始延迟 (HBP) + ssd1963_write_data_long(2); // HSYNC 结束延迟 (HFP) + ssd1963_write_data_long(10); // VSYNC 脉冲宽度 (10) + ssd1963_write_data_long(2); // VSYNC 起始延迟 (VBP) + ssd1963_write_data_long(2); // VSYNC 结束延迟 (VFP) + + // ============= 设置像素格式 ============= + ssd1963_write_cmd(SSD1963_SET_PIX_FORMAT); + ssd1963_write_data(0x55); // 16位色 (RGB565) + + // ============= 设置内存访问方向 ============= + ssd1963_write_cmd(SSD1963_MEM_ACCESS_CTRL); + ssd1963_write_data(0x08); // RGB, 正常方向 + + // ============= 设置背光 ============= + // rt_pin_mode(LCD_BL_PIN, PIN_MODE_OUTPUT); + // rt_pwm_enable(LCD_BL_PIN); + // rt_pwm_set(LCD_BL_PIN, 1000, 50000); // 1kHz, 50% 占空比 (可调) + // rt_pin_write(LCD_BL_PIN, PIN_HIGH); // 直接输出高电平点亮 + + // ============= 开启显示 ============= + ssd1963_write_cmd(SSD1963_EXIT_SLEEP); + rt_thread_mdelay(10); + ssd1963_write_cmd(SSD1963_BLANK_OFF); + ssd1963_write_cmd(SSD1963_ENTER_NORMAL); + rt_thread_mdelay(10); + ssd1963_write_cmd(SSD1963_IDLE_OFF); + + // 初始窗口 + ssd1963_set_window(0, 0, 799, 479); + + // 可选：清屏为黑色 + ssd1963_clear(0x00f0); +} + +// ==================== LVGL 对接接口 (可选封装) ==================== + +/** + * @brief 获取屏幕宽度 + * @return 宽度 + */ +rt_uint16_t ssd1963_get_width(void) +{ + return 800; +} + +/** + * @brief 获取屏幕高度 + * @return 高度 + */ +rt_uint16_t ssd1963_get_height(void) +{ + return 480; +} diff --git a/applications/LVGL/ssd1963.h b/applications/LVGL/ssd1963.h new file mode 100644 index 0000000..73fd521 --- /dev/null +++ b/applications/LVGL/ssd1963.h @@ -0,0 +1,35 @@ +/* + * Copyright (c) 2006-2021, RT-Thread Development Team + * + * SPDX-License-Identifier: Apache-2.0 + * + * Change Logs: + * Date Author Notes + * 2025-10-26 Administrator the first version + */ +#ifndef APPLICATIONS_SSD1963_H_ +#define APPLICATIONS_SSD1963_H_ + +#include + +// ==================== FSMC 地址映射（必须放在头文件中供外部使用）==================== +// 假设使用 FSMC Bank1, NE1, A16 作为 RS/DC 控制线 +#define SSD1963_BASE_ADDR ((uint32_t)(0x60000000)) // FSMC_NE1 +#define LCD_CMD_ADDR (LCD_BASE_ADDR + 0x00000000) // A0 = 0 +#define LCD_DATA_ADDR (LCD_BASE_ADDR + 0x00020000) // A0 = 1 + +// 定义 FSMC 地址：假设使用 Bank1, Base Address 0x60000000，A0 对应地址位1 +#define SSD1963_CMD_ADDR *(volatile uint16_t *)(0x60000000) +#define SSD1963_DATA_ADDR *(volatile uint16_t *)(0x60020000) + +#define LCD_Write_Cmd(cmd) (*(__IO uint16_t*)LCD_CMD_ADDR = (cmd)) +#define LCD_Write_Data(dat) (*(__IO uint16_t*)LCD_DATA_ADDR = (dat)) +// 函数声明 +void ssd1963_init(void); +void ssd1963_set_window(uint16_t x1, uint16_t y1, uint16_t x2, uint16_t y2); +void ssd1963_clear(rt_uint16_t color); + +rt_uint16_t ssd1963_get_width(void); +rt_uint16_t ssd1963_get_height(void); + +#endif /* APPLICATIONS_SSD1963_H_ */ diff --git a/applications/main.c b/applications/main.c index dce0269..5597361 100644 --- a/applications/main.c +++ b/applications/main.c @@ -16,6 +16,7 @@ #include "RUN_LED.h" #include "DB_SQLite.h" #include "DATA_comm.h" +#include "DATA_uart.h" #include "uart_rs485.h" #define DBG_TAG "main" @@ -26,11 +27,11 @@ extern rt_sem_t mount_sem; // 引用上面SD挂载线程定义的信号量 int main(void) { rt_sem_take(mount_sem, rt_tick_from_millisecond(5000)); // 等待挂载完成，最多等待 5 秒 - thread_RUN_LED();//运行指示灯线程 thread_DB_SQLite(); + rt_thread_mdelay(1000); data_comm_init(); - app_uart_rs485_startup(); - + start_uart_thread(); + thread_RUN_LED();//运行指示灯线程 return RT_EOK; } diff --git a/applications/mount_sdio_elmfatfs.c b/applications/mount_sdio_elmfatfs.c index e107588..0fe1adb 100644 --- a/applications/mount_sdio_elmfatfs.c +++ b/applications/mount_sdio_elmfatfs.c @@ -72,7 +72,7 @@ int stm32_sdcard_mount(void) tid = rt_thread_create("sd_mount", sd_mount, RT_NULL, - 4096, // 建议增大栈，避免溢出 + 1024*4, // 建议增大栈，避免溢出 RT_THREAD_PRIORITY_MAX - 2, 20); if (tid != RT_NULL) diff --git a/cubemx/.mxproject b/cubemx/.mxproject index c73bcea..22cc31b 100644 --- a/cubemx/.mxproject +++ b/cubemx/.mxproject @@ -1,14 +1,14 @@ -[PreviousGenFiles] -HeaderPath=..\Inc -HeaderFiles=stm32f4xx_it.h;stm32f4xx_hal_conf.h;main.h; -SourcePath=..\Src -SourceFiles=stm32f4xx_it.c;stm32f4xx_hal_msp.c;main.c; - [PreviousLibFiles] -LibFiles=Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_sdmmc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_sd.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_mmc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_rcc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_rcc_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_bus.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_rcc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_system.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_utils.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_flash.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_flash_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_flash_ramfunc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_gpio.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_gpio_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_gpio.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_dma_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_dma.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_dma.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_dmamux.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_pwr.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_pwr_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_pwr.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_cortex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_cortex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal.h;Drivers\STM32F4xx_HAL_Driver\Inc\Legacy\stm32_hal_legacy.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_def.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_exti.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_exti.h;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_ll_sdmmc.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_sd.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_mmc.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash_ramfunc.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_gpio.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cortex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_exti.c;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_sdmmc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_sd.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_mmc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_rcc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_rcc_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_bus.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_rcc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_system.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_utils.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_flash.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_flash_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_flash_ramfunc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_gpio.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_gpio_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_gpio.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_dma_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_dma.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_dma.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_dmamux.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_pwr.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_pwr_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_pwr.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_cortex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_cortex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal.h;Drivers\STM32F4xx_HAL_Driver\Inc\Legacy\stm32_hal_legacy.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_def.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_exti.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_exti.h;Drivers\CMSIS\Device\ST\STM32F4xx\Include\stm32f407xx.h;Drivers\CMSIS\Device\ST\STM32F4xx\Include\stm32f4xx.h;Drivers\CMSIS\Device\ST\STM32F4xx\Include\system_stm32f4xx.h;Drivers\CMSIS\Device\ST\STM32F4xx\Include\system_stm32f4xx.h;Drivers\CMSIS\Device\ST\STM32F4xx\Source\Templates\system_stm32f4xx.c;Drivers\CMSIS\Include\cachel1_armv7.h;Drivers\CMSIS\Include\cmsis_armcc.h;Drivers\CMSIS\Include\cmsis_armclang.h;Drivers\CMSIS\Include\cmsis_armclang_ltm.h;Drivers\CMSIS\Include\cmsis_compiler.h;Drivers\CMSIS\Include\cmsis_gcc.h;Drivers\CMSIS\Include\cmsis_iccarm.h;Drivers\CMSIS\Include\cmsis_version.h;Drivers\CMSIS\Include\core_armv81mml.h;Drivers\CMSIS\Include\core_armv8mbl.h;Drivers\CMSIS\Include\core_armv8mml.h;Drivers\CMSIS\Include\core_cm0.h;Drivers\CMSIS\Include\core_cm0plus.h;Drivers\CMSIS\Include\core_cm1.h;Drivers\CMSIS\Include\core_cm23.h;Drivers\CMSIS\Include\core_cm3.h;Drivers\CMSIS\Include\core_cm33.h;Drivers\CMSIS\Include\core_cm35p.h;Drivers\CMSIS\Include\core_cm4.h;Drivers\CMSIS\Include\core_cm55.h;Drivers\CMSIS\Include\core_cm7.h;Drivers\CMSIS\Include\core_cm85.h;Drivers\CMSIS\Include\core_sc000.h;Drivers\CMSIS\Include\core_sc300.h;Drivers\CMSIS\Include\core_starmc1.h;Drivers\CMSIS\Include\mpu_armv7.h;Drivers\CMSIS\Include\mpu_armv8.h;Drivers\CMSIS\Include\pac_armv81.h;Drivers\CMSIS\Include\pmu_armv8.h;Drivers\CMSIS\Include\tz_context.h; +LibFiles=Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_fsmc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_nor.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_sram.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_nand.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_pccard.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_rcc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_rcc_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_bus.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_rcc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_system.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_utils.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_flash.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_flash_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_flash_ramfunc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_gpio.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_gpio_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_gpio.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_dma_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_dma.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_dma.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_dmamux.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_pwr.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_pwr_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_pwr.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_cortex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_cortex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal.h;Drivers\STM32F4xx_HAL_Driver\Inc\Legacy\stm32_hal_legacy.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_def.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_exti.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_exti.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_sdmmc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_sd.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_mmc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_uart.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_usart.h;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_ll_fsmc.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_nor.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_sram.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_nand.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pccard.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash_ramfunc.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_gpio.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cortex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_exti.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_ll_sdmmc.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_sd.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_mmc.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_uart.c;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_fsmc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_nor.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_sram.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_nand.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_pccard.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_rcc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_rcc_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_bus.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_rcc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_system.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_utils.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_flash.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_flash_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_flash_ramfunc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_gpio.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_gpio_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_gpio.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_dma_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_dma.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_dma.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_dmamux.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_pwr.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_pwr_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_pwr.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_cortex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_cortex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal.h;Drivers\STM32F4xx_HAL_Driver\Inc\Legacy\stm32_hal_legacy.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_def.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_exti.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_exti.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_sdmmc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_sd.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_mmc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_uart.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_usart.h;Drivers\CMSIS\Device\ST\STM32F4xx\Include\stm32f407xx.h;Drivers\CMSIS\Device\ST\STM32F4xx\Include\stm32f4xx.h;Drivers\CMSIS\Device\ST\STM32F4xx\Include\system_stm32f4xx.h;Drivers\CMSIS\Device\ST\STM32F4xx\Include\system_stm32f4xx.h;Drivers\CMSIS\Device\ST\STM32F4xx\Source\Templates\system_stm32f4xx.c;Drivers\CMSIS\Include\cachel1_armv7.h;Drivers\CMSIS\Include\cmsis_armcc.h;Drivers\CMSIS\Include\cmsis_armclang.h;Drivers\CMSIS\Include\cmsis_armclang_ltm.h;Drivers\CMSIS\Include\cmsis_compiler.h;Drivers\CMSIS\Include\cmsis_gcc.h;Drivers\CMSIS\Include\cmsis_iccarm.h;Drivers\CMSIS\Include\cmsis_version.h;Drivers\CMSIS\Include\core_armv81mml.h;Drivers\CMSIS\Include\core_armv8mbl.h;Drivers\CMSIS\Include\core_armv8mml.h;Drivers\CMSIS\Include\core_cm0.h;Drivers\CMSIS\Include\core_cm0plus.h;Drivers\CMSIS\Include\core_cm1.h;Drivers\CMSIS\Include\core_cm23.h;Drivers\CMSIS\Include\core_cm3.h;Drivers\CMSIS\Include\core_cm33.h;Drivers\CMSIS\Include\core_cm35p.h;Drivers\CMSIS\Include\core_cm4.h;Drivers\CMSIS\Include\core_cm55.h;Drivers\CMSIS\Include\core_cm7.h;Drivers\CMSIS\Include\core_cm85.h;Drivers\CMSIS\Include\core_sc000.h;Drivers\CMSIS\Include\core_sc300.h;Drivers\CMSIS\Include\core_starmc1.h;Drivers\CMSIS\Include\mpu_armv7.h;Drivers\CMSIS\Include\mpu_armv8.h;Drivers\CMSIS\Include\pac_armv81.h;Drivers\CMSIS\Include\pmu_armv8.h;Drivers\CMSIS\Include\tz_context.h; [PreviousUsedIarFiles] -SourceFiles=..\C:\RT-ThreadStudio\workspace\828\cubemx\Src\main.c;..\C:\RT-ThreadStudio\workspace\828\cubemx\Src\stm32f4xx_it.c;..\C:\RT-ThreadStudio\workspace\828\cubemx\Src\stm32f4xx_hal_msp.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_ll_sdmmc.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_sd.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_mmc.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc_ex.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash_ex.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash_ramfunc.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_gpio.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma_ex.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr_ex.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cortex.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_exti.c;..\Drivers\CMSIS\Device\ST\STM32F4xx\Source\Templates\system_stm32f4xx.c;..\\Src\system_stm32f4xx.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_ll_sdmmc.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_sd.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_mmc.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc_ex.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash_ex.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash_ramfunc.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_gpio.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma_ex.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr_ex.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cortex.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_exti.c;..\Drivers\CMSIS\Device\ST\STM32F4xx\Source\Templates\system_stm32f4xx.c;..\\Src\system_stm32f4xx.c;;; +SourceFiles=..\Src\main.c;..\Src\stm32f4xx_it.c;..\Src\stm32f4xx_hal_msp.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_ll_fsmc.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_nor.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_sram.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_nand.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pccard.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc_ex.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash_ex.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash_ramfunc.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_gpio.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma_ex.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr_ex.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cortex.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_exti.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_ll_sdmmc.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_sd.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_mmc.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_uart.c;..\Drivers\CMSIS\Device\ST\STM32F4xx\Source\Templates\system_stm32f4xx.c;..\\Src\system_stm32f4xx.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_ll_fsmc.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_nor.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_sram.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_nand.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pccard.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc_ex.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash_ex.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash_ramfunc.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_gpio.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma_ex.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr_ex.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cortex.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_exti.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_ll_sdmmc.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_sd.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_mmc.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_uart.c;..\Drivers\CMSIS\Device\ST\STM32F4xx\Source\Templates\system_stm32f4xx.c;..\\Src\system_stm32f4xx.c;;; HeaderPath=..\Drivers\STM32F4xx_HAL_Driver\Inc;..\Drivers\STM32F4xx_HAL_Driver\Inc\Legacy;..\Drivers\CMSIS\Device\ST\STM32F4xx\Include;..\Drivers\CMSIS\Include;..\Inc; CDefines=USE_HAL_DRIVER;STM32F407xx;USE_HAL_DRIVER;USE_HAL_DRIVER; +[PreviousGenFiles] +HeaderPath=..\Inc +HeaderFiles=stm32f4xx_it.h;stm32f4xx_hal_conf.h;main.h; +SourcePath=..\Src +SourceFiles=stm32f4xx_it.c;stm32f4xx_hal_msp.c;main.c; + diff --git a/cubemx/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_nand.h b/cubemx/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_nand.h new file mode 100644 index 0000000..9db3882 --- /dev/null +++ b/cubemx/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_nand.h @@ -0,0 +1,387 @@ +/** + ****************************************************************************** + * @file stm32f4xx_hal_nand.h + * @author MCD Application Team + * @brief Header file of NAND HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32F4xx_HAL_NAND_H +#define STM32F4xx_HAL_NAND_H + +#ifdef __cplusplus +extern "C" { +#endif + +#if defined(FMC_Bank3) || defined(FMC_Bank2_3) || defined(FSMC_Bank2_3) + +/* Includes ------------------------------------------------------------------*/ +#if defined(FSMC_Bank2_3) +#include "stm32f4xx_ll_fsmc.h" +#else +#include "stm32f4xx_ll_fmc.h" +#endif /* FSMC_Bank2_3 */ + +/** @addtogroup STM32F4xx_HAL_Driver + * @{ + */ + +/** @addtogroup NAND + * @{ + */ + +/* Exported typedef ----------------------------------------------------------*/ +/* Exported types ------------------------------------------------------------*/ +/** @defgroup NAND_Exported_Types NAND Exported Types + * @{ + */ + +/** + * @brief HAL NAND State structures definition + */ +typedef enum +{ + HAL_NAND_STATE_RESET = 0x00U, /*!< NAND not yet initialized or disabled */ + HAL_NAND_STATE_READY = 0x01U, /*!< NAND initialized and ready for use */ + HAL_NAND_STATE_BUSY = 0x02U, /*!< NAND internal process is ongoing */ + HAL_NAND_STATE_ERROR = 0x03U /*!< NAND error state */ +} HAL_NAND_StateTypeDef; + +/** + * @brief NAND Memory electronic signature Structure definition + */ +typedef struct +{ + /*State = HAL_NAND_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_NAND_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_NAND_STATE_RESET) +#endif /* USE_HAL_NAND_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup NAND_Exported_Functions NAND Exported Functions + * @{ + */ + +/** @addtogroup NAND_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ + +/* Initialization/de-initialization functions ********************************/ +HAL_StatusTypeDef HAL_NAND_Init(NAND_HandleTypeDef *hnand, FMC_NAND_PCC_TimingTypeDef *ComSpace_Timing, + FMC_NAND_PCC_TimingTypeDef *AttSpace_Timing); +HAL_StatusTypeDef HAL_NAND_DeInit(NAND_HandleTypeDef *hnand); + +HAL_StatusTypeDef HAL_NAND_ConfigDevice(NAND_HandleTypeDef *hnand, const NAND_DeviceConfigTypeDef *pDeviceConfig); + +HAL_StatusTypeDef HAL_NAND_Read_ID(NAND_HandleTypeDef *hnand, NAND_IDTypeDef *pNAND_ID); + +void HAL_NAND_MspInit(NAND_HandleTypeDef *hnand); +void HAL_NAND_MspDeInit(NAND_HandleTypeDef *hnand); +void HAL_NAND_IRQHandler(NAND_HandleTypeDef *hnand); +void HAL_NAND_ITCallback(NAND_HandleTypeDef *hnand); + +/** + * @} + */ + +/** @addtogroup NAND_Exported_Functions_Group2 Input and Output functions + * @{ + */ + +/* IO operation functions ****************************************************/ +HAL_StatusTypeDef HAL_NAND_Reset(NAND_HandleTypeDef *hnand); + +HAL_StatusTypeDef HAL_NAND_Read_Page_8b(NAND_HandleTypeDef *hnand, const NAND_AddressTypeDef *pAddress, + uint8_t *pBuffer, uint32_t NumPageToRead); +HAL_StatusTypeDef HAL_NAND_Write_Page_8b(NAND_HandleTypeDef *hnand, const NAND_AddressTypeDef *pAddress, + const uint8_t *pBuffer, uint32_t NumPageToWrite); +HAL_StatusTypeDef HAL_NAND_Read_SpareArea_8b(NAND_HandleTypeDef *hnand, const NAND_AddressTypeDef *pAddress, + uint8_t *pBuffer, uint32_t NumSpareAreaToRead); +HAL_StatusTypeDef HAL_NAND_Write_SpareArea_8b(NAND_HandleTypeDef *hnand, const NAND_AddressTypeDef *pAddress, + const uint8_t *pBuffer, uint32_t NumSpareAreaTowrite); + +HAL_StatusTypeDef HAL_NAND_Read_Page_16b(NAND_HandleTypeDef *hnand, const NAND_AddressTypeDef *pAddress, + uint16_t *pBuffer, uint32_t NumPageToRead); +HAL_StatusTypeDef HAL_NAND_Write_Page_16b(NAND_HandleTypeDef *hnand, const NAND_AddressTypeDef *pAddress, + const uint16_t *pBuffer, uint32_t NumPageToWrite); +HAL_StatusTypeDef HAL_NAND_Read_SpareArea_16b(NAND_HandleTypeDef *hnand, const NAND_AddressTypeDef *pAddress, + uint16_t *pBuffer, uint32_t NumSpareAreaToRead); +HAL_StatusTypeDef HAL_NAND_Write_SpareArea_16b(NAND_HandleTypeDef *hnand, const NAND_AddressTypeDef *pAddress, + const uint16_t *pBuffer, uint32_t NumSpareAreaTowrite); + +HAL_StatusTypeDef HAL_NAND_Erase_Block(NAND_HandleTypeDef *hnand, const NAND_AddressTypeDef *pAddress); + +uint32_t HAL_NAND_Address_Inc(const NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress); + +#if (USE_HAL_NAND_REGISTER_CALLBACKS == 1) +/* NAND callback registering/unregistering */ +HAL_StatusTypeDef HAL_NAND_RegisterCallback(NAND_HandleTypeDef *hnand, HAL_NAND_CallbackIDTypeDef CallbackId, + pNAND_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_NAND_UnRegisterCallback(NAND_HandleTypeDef *hnand, HAL_NAND_CallbackIDTypeDef CallbackId); +#endif /* USE_HAL_NAND_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @addtogroup NAND_Exported_Functions_Group3 Peripheral Control functions + * @{ + */ + +/* NAND Control functions ****************************************************/ +HAL_StatusTypeDef HAL_NAND_ECC_Enable(NAND_HandleTypeDef *hnand); +HAL_StatusTypeDef HAL_NAND_ECC_Disable(NAND_HandleTypeDef *hnand); +HAL_StatusTypeDef HAL_NAND_GetECC(NAND_HandleTypeDef *hnand, uint32_t *ECCval, uint32_t Timeout); + +/** + * @} + */ + +/** @addtogroup NAND_Exported_Functions_Group4 Peripheral State functions + * @{ + */ +/* NAND State functions *******************************************************/ +HAL_NAND_StateTypeDef HAL_NAND_GetState(const NAND_HandleTypeDef *hnand); +uint32_t HAL_NAND_Read_Status(const NAND_HandleTypeDef *hnand); +/** + * @} + */ + +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup NAND_Private_Constants NAND Private Constants + * @{ + */ +#if defined(FMC_Bank2_3) +#define NAND_DEVICE1 0x70000000UL +#define NAND_DEVICE2 0x80000000UL +#else +#define NAND_DEVICE 0x80000000UL +#endif /* FMC_Bank2_3 */ +#define NAND_WRITE_TIMEOUT 0x01000000UL + +#define CMD_AREA (1UL<<16U) /* A16 = CLE high */ +#define ADDR_AREA (1UL<<17U) /* A17 = ALE high */ + +#define NAND_CMD_AREA_A ((uint8_t)0x00) +#define NAND_CMD_AREA_B ((uint8_t)0x01) +#define NAND_CMD_AREA_C ((uint8_t)0x50) +#define NAND_CMD_AREA_TRUE1 ((uint8_t)0x30) + +#define NAND_CMD_WRITE0 ((uint8_t)0x80) +#define NAND_CMD_WRITE_TRUE1 ((uint8_t)0x10) +#define NAND_CMD_ERASE0 ((uint8_t)0x60) +#define NAND_CMD_ERASE1 ((uint8_t)0xD0) +#define NAND_CMD_READID ((uint8_t)0x90) +#define NAND_CMD_STATUS ((uint8_t)0x70) +#define NAND_CMD_LOCK_STATUS ((uint8_t)0x7A) +#define NAND_CMD_RESET ((uint8_t)0xFF) + +/* NAND memory status */ +#define NAND_VALID_ADDRESS 0x00000100UL +#define NAND_INVALID_ADDRESS 0x00000200UL +#define NAND_TIMEOUT_ERROR 0x00000400UL +#define NAND_BUSY 0x00000000UL +#define NAND_ERROR 0x00000001UL +#define NAND_READY 0x00000040UL +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup NAND_Private_Macros NAND Private Macros + * @{ + */ + +/** + * @brief NAND memory address computation. + * @param __ADDRESS__ NAND memory address. + * @param __HANDLE__ NAND handle. + * @retval NAND Raw address value + */ +#define ARRAY_ADDRESS(__ADDRESS__ , __HANDLE__) ((__ADDRESS__)->Page + \ + (((__ADDRESS__)->Block + \ + (((__ADDRESS__)->Plane) * \ + ((__HANDLE__)->Config.PlaneSize))) * \ + ((__HANDLE__)->Config.BlockSize))) + +/** + * @brief NAND memory Column address computation. + * @param __HANDLE__ NAND handle. + * @retval NAND Raw address value + */ +#define COLUMN_ADDRESS( __HANDLE__) ((__HANDLE__)->Config.PageSize) + +/** + * @brief NAND memory address cycling. + * @param __ADDRESS__ NAND memory address. + * @retval NAND address cycling value. + */ +#define ADDR_1ST_CYCLE(__ADDRESS__) (uint8_t)(__ADDRESS__) /* 1st addressing cycle */ +#define ADDR_2ND_CYCLE(__ADDRESS__) (uint8_t)((__ADDRESS__) >> 8) /* 2nd addressing cycle */ +#define ADDR_3RD_CYCLE(__ADDRESS__) (uint8_t)((__ADDRESS__) >> 16) /* 3rd addressing cycle */ +#define ADDR_4TH_CYCLE(__ADDRESS__) (uint8_t)((__ADDRESS__) >> 24) /* 4th addressing cycle */ + +/** + * @brief NAND memory Columns cycling. + * @param __ADDRESS__ NAND memory address. + * @retval NAND Column address cycling value. + */ +#define COLUMN_1ST_CYCLE(__ADDRESS__) (uint8_t)((__ADDRESS__) & 0xFFU) /* 1st Column addressing cycle */ +#define COLUMN_2ND_CYCLE(__ADDRESS__) (uint8_t)((__ADDRESS__) >> 8) /* 2nd Column addressing cycle */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* FMC_Bank3) || defined(FMC_Bank2_3) || defined(FSMC_Bank2_3 */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32F4xx_HAL_NAND_H */ diff --git a/cubemx/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_nor.h b/cubemx/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_nor.h new file mode 100644 index 0000000..427c2cc --- /dev/null +++ b/cubemx/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_nor.h @@ -0,0 +1,330 @@ +/** + ****************************************************************************** + * @file stm32f4xx_hal_nor.h + * @author MCD Application Team + * @brief Header file of NOR HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32F4xx_HAL_NOR_H +#define STM32F4xx_HAL_NOR_H + +#ifdef __cplusplus +extern "C" { +#endif + +#if defined(FMC_Bank1) || defined(FSMC_Bank1) + +/* Includes ------------------------------------------------------------------*/ +#if defined(FSMC_Bank1) +#include "stm32f4xx_ll_fsmc.h" +#else +#include "stm32f4xx_ll_fmc.h" +#endif /* FMC_Bank1 */ + +/** @addtogroup STM32F4xx_HAL_Driver + * @{ + */ + +/** @addtogroup NOR + * @{ + */ + +/* Exported typedef ----------------------------------------------------------*/ +/** @defgroup NOR_Exported_Types NOR Exported Types + * @{ + */ + +/** + * @brief HAL SRAM State structures definition + */ +typedef enum +{ + HAL_NOR_STATE_RESET = 0x00U, /*!< NOR not yet initialized or disabled */ + HAL_NOR_STATE_READY = 0x01U, /*!< NOR initialized and ready for use */ + HAL_NOR_STATE_BUSY = 0x02U, /*!< NOR internal processing is ongoing */ + HAL_NOR_STATE_ERROR = 0x03U, /*!< NOR error state */ + HAL_NOR_STATE_PROTECTED = 0x04U /*!< NOR NORSRAM device write protected */ +} HAL_NOR_StateTypeDef; + +/** + * @brief FMC NOR Status typedef + */ +typedef enum +{ + HAL_NOR_STATUS_SUCCESS = 0U, + HAL_NOR_STATUS_ONGOING, + HAL_NOR_STATUS_ERROR, + HAL_NOR_STATUS_TIMEOUT +} HAL_NOR_StatusTypeDef; + +/** + * @brief FMC NOR ID typedef + */ +typedef struct +{ + uint16_t Manufacturer_Code; /*!< Defines the device's manufacturer code used to identify the memory */ + + uint16_t Device_Code1; + + uint16_t Device_Code2; + + uint16_t Device_Code3; /*!< Defines the device's codes used to identify the memory. + These codes can be accessed by performing read operations with specific + control signals and addresses set.They can also be accessed by issuing + an Auto Select command */ +} NOR_IDTypeDef; + +/** + * @brief FMC NOR CFI typedef + */ +typedef struct +{ + /*!< Defines the information stored in the memory's Common flash interface + which contains a description of various electrical and timing parameters, + density information and functions supported by the memory */ + + uint16_t CFI_1; + + uint16_t CFI_2; + + uint16_t CFI_3; + + uint16_t CFI_4; +} NOR_CFITypeDef; + +/** + * @brief NOR handle Structure definition + */ +#if (USE_HAL_NOR_REGISTER_CALLBACKS == 1) +typedef struct __NOR_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_NOR_REGISTER_CALLBACKS */ + +{ + FMC_NORSRAM_TypeDef *Instance; /*!< Register base address */ + + FMC_NORSRAM_EXTENDED_TypeDef *Extended; /*!< Extended mode register base address */ + + FMC_NORSRAM_InitTypeDef Init; /*!< NOR device control configuration parameters */ + + HAL_LockTypeDef Lock; /*!< NOR locking object */ + + __IO HAL_NOR_StateTypeDef State; /*!< NOR device access state */ + + uint32_t CommandSet; /*!< NOR algorithm command set and control */ + +#if (USE_HAL_NOR_REGISTER_CALLBACKS == 1) + void (* MspInitCallback)(struct __NOR_HandleTypeDef *hnor); /*!< NOR Msp Init callback */ + void (* MspDeInitCallback)(struct __NOR_HandleTypeDef *hnor); /*!< NOR Msp DeInit callback */ +#endif /* USE_HAL_NOR_REGISTER_CALLBACKS */ +} NOR_HandleTypeDef; + +#if (USE_HAL_NOR_REGISTER_CALLBACKS == 1) +/** + * @brief HAL NOR Callback ID enumeration definition + */ +typedef enum +{ + HAL_NOR_MSP_INIT_CB_ID = 0x00U, /*!< NOR MspInit Callback ID */ + HAL_NOR_MSP_DEINIT_CB_ID = 0x01U /*!< NOR MspDeInit Callback ID */ +} HAL_NOR_CallbackIDTypeDef; + +/** + * @brief HAL NOR Callback pointer definition + */ +typedef void (*pNOR_CallbackTypeDef)(NOR_HandleTypeDef *hnor); +#endif /* USE_HAL_NOR_REGISTER_CALLBACKS */ +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup NOR_Exported_Macros NOR Exported Macros + * @{ + */ +/** @brief Reset NOR handle state + * @param __HANDLE__ specifies the NOR handle. + * @retval None + */ +#if (USE_HAL_NOR_REGISTER_CALLBACKS == 1) +#define __HAL_NOR_RESET_HANDLE_STATE(__HANDLE__) do { \ + (__HANDLE__)->State = HAL_NOR_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_NOR_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_NOR_STATE_RESET) +#endif /* USE_HAL_NOR_REGISTER_CALLBACKS */ +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup NOR_Exported_Functions NOR Exported Functions + * @{ + */ + +/** @addtogroup NOR_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ + +/* Initialization/de-initialization functions ********************************/ +HAL_StatusTypeDef HAL_NOR_Init(NOR_HandleTypeDef *hnor, FMC_NORSRAM_TimingTypeDef *Timing, + FMC_NORSRAM_TimingTypeDef *ExtTiming); +HAL_StatusTypeDef HAL_NOR_DeInit(NOR_HandleTypeDef *hnor); +void HAL_NOR_MspInit(NOR_HandleTypeDef *hnor); +void HAL_NOR_MspDeInit(NOR_HandleTypeDef *hnor); +void HAL_NOR_MspWait(NOR_HandleTypeDef *hnor, uint32_t Timeout); +/** + * @} + */ + +/** @addtogroup NOR_Exported_Functions_Group2 Input and Output functions + * @{ + */ + +/* I/O operation functions ***************************************************/ +HAL_StatusTypeDef HAL_NOR_Read_ID(NOR_HandleTypeDef *hnor, NOR_IDTypeDef *pNOR_ID); +HAL_StatusTypeDef HAL_NOR_ReturnToReadMode(NOR_HandleTypeDef *hnor); +HAL_StatusTypeDef HAL_NOR_Read(NOR_HandleTypeDef *hnor, uint32_t *pAddress, uint16_t *pData); +HAL_StatusTypeDef HAL_NOR_Program(NOR_HandleTypeDef *hnor, uint32_t *pAddress, uint16_t *pData); + +HAL_StatusTypeDef HAL_NOR_ReadBuffer(NOR_HandleTypeDef *hnor, uint32_t uwAddress, uint16_t *pData, + uint32_t uwBufferSize); +HAL_StatusTypeDef HAL_NOR_ProgramBuffer(NOR_HandleTypeDef *hnor, uint32_t uwAddress, uint16_t *pData, + uint32_t uwBufferSize); + +HAL_StatusTypeDef HAL_NOR_Erase_Block(NOR_HandleTypeDef *hnor, uint32_t BlockAddress, uint32_t Address); +HAL_StatusTypeDef HAL_NOR_Erase_Chip(NOR_HandleTypeDef *hnor, uint32_t Address); +HAL_StatusTypeDef HAL_NOR_Read_CFI(NOR_HandleTypeDef *hnor, NOR_CFITypeDef *pNOR_CFI); + +#if (USE_HAL_NOR_REGISTER_CALLBACKS == 1) +/* NOR callback registering/unregistering */ +HAL_StatusTypeDef HAL_NOR_RegisterCallback(NOR_HandleTypeDef *hnor, HAL_NOR_CallbackIDTypeDef CallbackId, + pNOR_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_NOR_UnRegisterCallback(NOR_HandleTypeDef *hnor, HAL_NOR_CallbackIDTypeDef CallbackId); +#endif /* USE_HAL_NOR_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @addtogroup NOR_Exported_Functions_Group3 NOR Control functions + * @{ + */ + +/* NOR Control functions *****************************************************/ +HAL_StatusTypeDef HAL_NOR_WriteOperation_Enable(NOR_HandleTypeDef *hnor); +HAL_StatusTypeDef HAL_NOR_WriteOperation_Disable(NOR_HandleTypeDef *hnor); +/** + * @} + */ + +/** @addtogroup NOR_Exported_Functions_Group4 NOR State functions + * @{ + */ + +/* NOR State functions ********************************************************/ +HAL_NOR_StateTypeDef HAL_NOR_GetState(const NOR_HandleTypeDef *hnor); +HAL_NOR_StatusTypeDef HAL_NOR_GetStatus(NOR_HandleTypeDef *hnor, uint32_t Address, uint32_t Timeout); +/** + * @} + */ + +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup NOR_Private_Constants NOR Private Constants + * @{ + */ +/* NOR device IDs addresses */ +#define MC_ADDRESS ((uint16_t)0x0000) +#define DEVICE_CODE1_ADDR ((uint16_t)0x0001) +#define DEVICE_CODE2_ADDR ((uint16_t)0x000E) +#define DEVICE_CODE3_ADDR ((uint16_t)0x000F) + +/* NOR CFI IDs addresses */ +#define CFI1_ADDRESS ((uint16_t)0x0061) +#define CFI2_ADDRESS ((uint16_t)0x0062) +#define CFI3_ADDRESS ((uint16_t)0x0063) +#define CFI4_ADDRESS ((uint16_t)0x0064) + +/* NOR operation wait timeout */ +#define NOR_TMEOUT ((uint16_t)0xFFFF) + +/* NOR memory data width */ +#define NOR_MEMORY_8B ((uint8_t)0x00) +#define NOR_MEMORY_16B ((uint8_t)0x01) + +/* NOR memory device read/write start address */ +#define NOR_MEMORY_ADRESS1 (0x60000000U) +#define NOR_MEMORY_ADRESS2 (0x64000000U) +#define NOR_MEMORY_ADRESS3 (0x68000000U) +#define NOR_MEMORY_ADRESS4 (0x6C000000U) +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup NOR_Private_Macros NOR Private Macros + * @{ + */ +/** + * @brief NOR memory address shifting. + * @param __NOR_ADDRESS NOR base address + * @param __NOR_MEMORY_WIDTH_ NOR memory width + * @param __ADDRESS__ NOR memory address + * @retval NOR shifted address value + */ +#define NOR_ADDR_SHIFT(__NOR_ADDRESS, __NOR_MEMORY_WIDTH_, __ADDRESS__) \ + ((uint32_t)(((__NOR_MEMORY_WIDTH_) == NOR_MEMORY_16B)? \ + ((uint32_t)((__NOR_ADDRESS) + (2U * (__ADDRESS__)))): \ + ((uint32_t)((__NOR_ADDRESS) + (__ADDRESS__))))) + +/** + * @brief NOR memory write data to specified address. + * @param __ADDRESS__ NOR memory address + * @param __DATA__ Data to write + * @retval None + */ +#define NOR_WRITE(__ADDRESS__, __DATA__) do{ \ + (*(__IO uint16_t *)((uint32_t)(__ADDRESS__)) = (__DATA__)); \ + __DSB(); \ + } while(0) + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* FMC_Bank1 || FSMC_Bank1 */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32F4xx_HAL_NOR_H */ diff --git a/cubemx/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pccard.h b/cubemx/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pccard.h new file mode 100644 index 0000000..0be5de5 --- /dev/null +++ b/cubemx/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pccard.h @@ -0,0 +1,286 @@ +/** + ****************************************************************************** + * @file stm32f4xx_hal_pccard.h + * @author MCD Application Team + * @brief Header file of PCCARD HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32F4xx_HAL_PCCARD_H +#define STM32F4xx_HAL_PCCARD_H + +#ifdef __cplusplus +extern "C" { +#endif + +#if defined(FMC_Bank4) || defined(FSMC_Bank4) + +/* Includes ------------------------------------------------------------------*/ +#if defined(FSMC_Bank4) +#include "stm32f4xx_ll_fsmc.h" +#else +#include "stm32f4xx_ll_fmc.h" +#endif /* FSMC_Bank4 */ + +/** @addtogroup STM32F4xx_HAL_Driver + * @{ + */ + +/** @addtogroup PCCARD + * @{ + */ + +/* Exported typedef ----------------------------------------------------------*/ +/** @defgroup PCCARD_Exported_Types PCCARD Exported Types + * @{ + */ + +/** + * @brief HAL PCCARD State structures definition + */ +typedef enum +{ + HAL_PCCARD_STATE_RESET = 0x00U, /*!< PCCARD peripheral not yet initialized or disabled */ + HAL_PCCARD_STATE_READY = 0x01U, /*!< PCCARD peripheral ready */ + HAL_PCCARD_STATE_BUSY = 0x02U, /*!< PCCARD peripheral busy */ + HAL_PCCARD_STATE_ERROR = 0x04U /*!< PCCARD peripheral error */ +} HAL_PCCARD_StateTypeDef; + +typedef enum +{ + HAL_PCCARD_STATUS_SUCCESS = 0U, + HAL_PCCARD_STATUS_ONGOING, + HAL_PCCARD_STATUS_ERROR, + HAL_PCCARD_STATUS_TIMEOUT +} HAL_PCCARD_StatusTypeDef; + +/** + * @brief FMC_PCCARD handle Structure definition + */ +#if (USE_HAL_PCCARD_REGISTER_CALLBACKS == 1) +typedef struct __PCCARD_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_PCCARD_REGISTER_CALLBACKS */ +{ + FMC_PCCARD_TypeDef *Instance; /*!< Register base address for PCCARD device */ + + FMC_PCCARD_InitTypeDef Init; /*!< PCCARD device control configuration parameters */ + + __IO HAL_PCCARD_StateTypeDef State; /*!< PCCARD device access state */ + + HAL_LockTypeDef Lock; /*!< PCCARD Lock */ + +#if (USE_HAL_PCCARD_REGISTER_CALLBACKS == 1) + void (* MspInitCallback)(struct __PCCARD_HandleTypeDef *hpccard); /*!< PCCARD Msp Init callback */ + void (* MspDeInitCallback)(struct __PCCARD_HandleTypeDef *hpccard); /*!< PCCARD Msp DeInit callback */ + void (* ItCallback)(struct __PCCARD_HandleTypeDef *hpccard); /*!< PCCARD IT callback */ +#endif /* USE_HAL_PCCARD_REGISTER_CALLBACKS */ +} PCCARD_HandleTypeDef; + +#if (USE_HAL_PCCARD_REGISTER_CALLBACKS == 1) +/** + * @brief HAL PCCARD Callback ID enumeration definition + */ +typedef enum +{ + HAL_PCCARD_MSP_INIT_CB_ID = 0x00U, /*!< PCCARD MspInit Callback ID */ + HAL_PCCARD_MSP_DEINIT_CB_ID = 0x01U, /*!< PCCARD MspDeInit Callback ID */ + HAL_PCCARD_IT_CB_ID = 0x02U /*!< PCCARD IT Callback ID */ +} HAL_PCCARD_CallbackIDTypeDef; + +/** + * @brief HAL PCCARD Callback pointer definition + */ +typedef void (*pPCCARD_CallbackTypeDef)(PCCARD_HandleTypeDef *hpccard); +#endif /* USE_HAL_PCCARD_REGISTER_CALLBACKS */ +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup PCCARD_Exported_Macros PCCARD Exported Macros + * @{ + */ +/** @brief Reset PCCARD handle state + * @param __HANDLE__ specifies the PCCARD handle. + * @retval None + */ +#if (USE_HAL_PCCARD_REGISTER_CALLBACKS == 1) +#define __HAL_PCCARD_RESET_HANDLE_STATE(__HANDLE__) do { \ + (__HANDLE__)->State = HAL_PCCARD_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_PCCARD_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_PCCARD_STATE_RESET) +#endif /* USE_HAL_PCCARD_REGISTER_CALLBACKS */ +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup PCCARD_Exported_Functions + * @{ + */ + +/** @addtogroup PCCARD_Exported_Functions_Group1 + * @{ + */ +/* Initialization/de-initialization functions **********************************/ +HAL_StatusTypeDef HAL_PCCARD_Init(PCCARD_HandleTypeDef *hpccard, FMC_NAND_PCC_TimingTypeDef *ComSpaceTiming, + FMC_NAND_PCC_TimingTypeDef *AttSpaceTiming, + FMC_NAND_PCC_TimingTypeDef *IOSpaceTiming); +HAL_StatusTypeDef HAL_PCCARD_DeInit(PCCARD_HandleTypeDef *hpccard); +void HAL_PCCARD_MspInit(PCCARD_HandleTypeDef *hpccard); +void HAL_PCCARD_MspDeInit(PCCARD_HandleTypeDef *hpccard); +/** + * @} + */ + +/** @addtogroup PCCARD_Exported_Functions_Group2 + * @{ + */ +/* IO operation functions *****************************************************/ +HAL_StatusTypeDef HAL_PCCARD_Read_ID(PCCARD_HandleTypeDef *hpccard, uint8_t CompactFlash_ID[], uint8_t *pStatus); +HAL_StatusTypeDef HAL_PCCARD_Write_Sector(PCCARD_HandleTypeDef *hpccard, uint16_t *pBuffer, uint16_t SectorAddress, + uint8_t *pStatus); +HAL_StatusTypeDef HAL_PCCARD_Read_Sector(PCCARD_HandleTypeDef *hpccard, uint16_t *pBuffer, uint16_t SectorAddress, + uint8_t *pStatus); +HAL_StatusTypeDef HAL_PCCARD_Erase_Sector(PCCARD_HandleTypeDef *hpccard, uint16_t SectorAddress, uint8_t *pStatus); +HAL_StatusTypeDef HAL_PCCARD_Reset(PCCARD_HandleTypeDef *hpccard); +void HAL_PCCARD_IRQHandler(PCCARD_HandleTypeDef *hpccard); +void HAL_PCCARD_ITCallback(PCCARD_HandleTypeDef *hpccard); + +#if (USE_HAL_PCCARD_REGISTER_CALLBACKS == 1) +/* PCCARD callback registering/unregistering */ +HAL_StatusTypeDef HAL_PCCARD_RegisterCallback(PCCARD_HandleTypeDef *hpccard, HAL_PCCARD_CallbackIDTypeDef CallbackId, + pPCCARD_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_PCCARD_UnRegisterCallback(PCCARD_HandleTypeDef *hpccard, + HAL_PCCARD_CallbackIDTypeDef CallbackId); +#endif /* USE_HAL_PCCARD_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @addtogroup PCCARD_Exported_Functions_Group3 + * @{ + */ +/* PCCARD State functions *******************************************************/ +HAL_PCCARD_StateTypeDef HAL_PCCARD_GetState(PCCARD_HandleTypeDef *hpccard); +HAL_PCCARD_StatusTypeDef HAL_PCCARD_GetStatus(PCCARD_HandleTypeDef *hpccard); +HAL_PCCARD_StatusTypeDef HAL_PCCARD_ReadStatus(PCCARD_HandleTypeDef *hpccard); +/** + * @} + */ + +/** + * @} + */ +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup PCCARD_Private_Constants PCCARD Private Constants + * @{ + */ +#define PCCARD_DEVICE_ADDRESS 0x90000000U +#define PCCARD_ATTRIBUTE_SPACE_ADDRESS 0x98000000U /* Attribute space size to @0x9BFF FFFF */ +#define PCCARD_COMMON_SPACE_ADDRESS PCCARD_DEVICE_ADDRESS /* Common space size to @0x93FF FFFF */ +#define PCCARD_IO_SPACE_ADDRESS 0x9C000000U /* IO space size to @0x9FFF FFFF */ +#define PCCARD_IO_SPACE_PRIMARY_ADDR 0x9C0001F0U /* IO space size to @0x9FFF FFFF */ + +/* Flash-ATA registers description */ +#define ATA_DATA ((uint8_t)0x00) /* Data register */ +#define ATA_SECTOR_COUNT ((uint8_t)0x02) /* Sector Count register */ +#define ATA_SECTOR_NUMBER ((uint8_t)0x03) /* Sector Number register */ +#define ATA_CYLINDER_LOW ((uint8_t)0x04) /* Cylinder low register */ +#define ATA_CYLINDER_HIGH ((uint8_t)0x05) /* Cylinder high register */ +#define ATA_CARD_HEAD ((uint8_t)0x06) /* Card/Head register */ +#define ATA_STATUS_CMD ((uint8_t)0x07) /* Status(read)/Command(write) register */ +#define ATA_STATUS_CMD_ALTERNATE ((uint8_t)0x0E) /* Alternate Status(read)/Command(write) register */ +#define ATA_COMMON_DATA_AREA ((uint16_t)0x0400) /* Start of data area (for Common access only!) */ +#define ATA_CARD_CONFIGURATION ((uint16_t)0x0202) /* Card Configuration and Status Register */ + +/* Flash-ATA commands */ +#define ATA_READ_SECTOR_CMD ((uint8_t)0x20) +#define ATA_WRITE_SECTOR_CMD ((uint8_t)0x30) +#define ATA_ERASE_SECTOR_CMD ((uint8_t)0xC0) +#define ATA_IDENTIFY_CMD ((uint8_t)0xEC) + +/* PC Card/Compact Flash status */ +#define PCCARD_TIMEOUT_ERROR ((uint8_t)0x60) +#define PCCARD_BUSY ((uint8_t)0x80) +#define PCCARD_PROGR ((uint8_t)0x01) +#define PCCARD_READY ((uint8_t)0x40) + +#define PCCARD_SECTOR_SIZE 255U /* In half words */ + +/** + * @} + */ +/* Compact Flash redefinition */ +#define HAL_CF_Init HAL_PCCARD_Init +#define HAL_CF_DeInit HAL_PCCARD_DeInit +#define HAL_CF_MspInit HAL_PCCARD_MspInit +#define HAL_CF_MspDeInit HAL_PCCARD_MspDeInit + +#define HAL_CF_Read_ID HAL_PCCARD_Read_ID +#define HAL_CF_Write_Sector HAL_PCCARD_Write_Sector +#define HAL_CF_Read_Sector HAL_PCCARD_Read_Sector +#define HAL_CF_Erase_Sector HAL_PCCARD_Erase_Sector +#define HAL_CF_Reset HAL_PCCARD_Reset +#define HAL_CF_IRQHandler HAL_PCCARD_IRQHandler +#define HAL_CF_ITCallback HAL_PCCARD_ITCallback + +#define HAL_CF_GetState HAL_PCCARD_GetState +#define HAL_CF_GetStatus HAL_PCCARD_GetStatus +#define HAL_CF_ReadStatus HAL_PCCARD_ReadStatus + +#define HAL_CF_STATUS_SUCCESS HAL_PCCARD_STATUS_SUCCESS +#define HAL_CF_STATUS_ONGOING HAL_PCCARD_STATUS_ONGOING +#define HAL_CF_STATUS_ERROR HAL_PCCARD_STATUS_ERROR +#define HAL_CF_STATUS_TIMEOUT HAL_PCCARD_STATUS_TIMEOUT +#define HAL_CF_StatusTypeDef HAL_PCCARD_StatusTypeDef + +#define CF_DEVICE_ADDRESS PCCARD_DEVICE_ADDRESS +#define CF_ATTRIBUTE_SPACE_ADDRESS PCCARD_ATTRIBUTE_SPACE_ADDRESS +#define CF_COMMON_SPACE_ADDRESS PCCARD_COMMON_SPACE_ADDRESS +#define CF_IO_SPACE_ADDRESS PCCARD_IO_SPACE_ADDRESS +#define CF_IO_SPACE_PRIMARY_ADDR PCCARD_IO_SPACE_PRIMARY_ADDR + +#define CF_TIMEOUT_ERROR PCCARD_TIMEOUT_ERROR +#define CF_BUSY PCCARD_BUSY +#define CF_PROGR PCCARD_PROGR +#define CF_READY PCCARD_READY + +#define CF_SECTOR_SIZE PCCARD_SECTOR_SIZE + +/* Private macros ------------------------------------------------------------*/ +/** + * @} + */ + + +/** + * @} + */ + +#endif /* FMC_Bank4 || FSMC_Bank4 */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32F4xx_HAL_PCCARD_H */ diff --git a/cubemx/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_sram.h b/cubemx/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_sram.h new file mode 100644 index 0000000..a6e6111 --- /dev/null +++ b/cubemx/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_sram.h @@ -0,0 +1,236 @@ +/** + ****************************************************************************** + * @file stm32f4xx_hal_sram.h + * @author MCD Application Team + * @brief Header file of SRAM HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32F4xx_HAL_SRAM_H +#define STM32F4xx_HAL_SRAM_H + +#ifdef __cplusplus +extern "C" { +#endif + +#if defined(FMC_Bank1) || defined(FSMC_Bank1) + +/* Includes ------------------------------------------------------------------*/ +#if defined(FSMC_Bank1) +#include "stm32f4xx_ll_fsmc.h" +#else +#include "stm32f4xx_ll_fmc.h" +#endif /* FSMC_Bank1 */ + +/** @addtogroup STM32F4xx_HAL_Driver + * @{ + */ +/** @addtogroup SRAM + * @{ + */ + +/* Exported typedef ----------------------------------------------------------*/ + +/** @defgroup SRAM_Exported_Types SRAM Exported Types + * @{ + */ +/** + * @brief HAL SRAM State structures definition + */ +typedef enum +{ + HAL_SRAM_STATE_RESET = 0x00U, /*!< SRAM not yet initialized or disabled */ + HAL_SRAM_STATE_READY = 0x01U, /*!< SRAM initialized and ready for use */ + HAL_SRAM_STATE_BUSY = 0x02U, /*!< SRAM internal process is ongoing */ + HAL_SRAM_STATE_ERROR = 0x03U, /*!< SRAM error state */ + HAL_SRAM_STATE_PROTECTED = 0x04U /*!< SRAM peripheral NORSRAM device write protected */ + +} HAL_SRAM_StateTypeDef; + +/** + * @brief SRAM handle Structure definition + */ +#if (USE_HAL_SRAM_REGISTER_CALLBACKS == 1) +typedef struct __SRAM_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_SRAM_REGISTER_CALLBACKS */ +{ + FMC_NORSRAM_TypeDef *Instance; /*!< Register base address */ + + FMC_NORSRAM_EXTENDED_TypeDef *Extended; /*!< Extended mode register base address */ + + FMC_NORSRAM_InitTypeDef Init; /*!< SRAM device control configuration parameters */ + + HAL_LockTypeDef Lock; /*!< SRAM locking object */ + + __IO HAL_SRAM_StateTypeDef State; /*!< SRAM device access state */ + + DMA_HandleTypeDef *hdma; /*!< Pointer DMA handler */ + +#if (USE_HAL_SRAM_REGISTER_CALLBACKS == 1) + void (* MspInitCallback)(struct __SRAM_HandleTypeDef *hsram); /*!< SRAM Msp Init callback */ + void (* MspDeInitCallback)(struct __SRAM_HandleTypeDef *hsram); /*!< SRAM Msp DeInit callback */ + void (* DmaXferCpltCallback)(DMA_HandleTypeDef *hdma); /*!< SRAM DMA Xfer Complete callback */ + void (* DmaXferErrorCallback)(DMA_HandleTypeDef *hdma); /*!< SRAM DMA Xfer Error callback */ +#endif /* USE_HAL_SRAM_REGISTER_CALLBACKS */ +} SRAM_HandleTypeDef; + +#if (USE_HAL_SRAM_REGISTER_CALLBACKS == 1) +/** + * @brief HAL SRAM Callback ID enumeration definition + */ +typedef enum +{ + HAL_SRAM_MSP_INIT_CB_ID = 0x00U, /*!< SRAM MspInit Callback ID */ + HAL_SRAM_MSP_DEINIT_CB_ID = 0x01U, /*!< SRAM MspDeInit Callback ID */ + HAL_SRAM_DMA_XFER_CPLT_CB_ID = 0x02U, /*!< SRAM DMA Xfer Complete Callback ID */ + HAL_SRAM_DMA_XFER_ERR_CB_ID = 0x03U /*!< SRAM DMA Xfer Complete Callback ID */ +} HAL_SRAM_CallbackIDTypeDef; + +/** + * @brief HAL SRAM Callback pointer definition + */ +typedef void (*pSRAM_CallbackTypeDef)(SRAM_HandleTypeDef *hsram); +typedef void (*pSRAM_DmaCallbackTypeDef)(DMA_HandleTypeDef *hdma); +#endif /* USE_HAL_SRAM_REGISTER_CALLBACKS */ +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/* Exported macro ------------------------------------------------------------*/ + +/** @defgroup SRAM_Exported_Macros SRAM Exported Macros + * @{ + */ + +/** @brief Reset SRAM handle state + * @param __HANDLE__ SRAM handle + * @retval None + */ +#if (USE_HAL_SRAM_REGISTER_CALLBACKS == 1) +#define __HAL_SRAM_RESET_HANDLE_STATE(__HANDLE__) do { \ + (__HANDLE__)->State = HAL_SRAM_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_SRAM_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SRAM_STATE_RESET) +#endif /* USE_HAL_SRAM_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup SRAM_Exported_Functions SRAM Exported Functions + * @{ + */ + +/** @addtogroup SRAM_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ + +/* Initialization/de-initialization functions ********************************/ +HAL_StatusTypeDef HAL_SRAM_Init(SRAM_HandleTypeDef *hsram, FMC_NORSRAM_TimingTypeDef *Timing, + FMC_NORSRAM_TimingTypeDef *ExtTiming); +HAL_StatusTypeDef HAL_SRAM_DeInit(SRAM_HandleTypeDef *hsram); +void HAL_SRAM_MspInit(SRAM_HandleTypeDef *hsram); +void HAL_SRAM_MspDeInit(SRAM_HandleTypeDef *hsram); + +/** + * @} + */ + +/** @addtogroup SRAM_Exported_Functions_Group2 Input Output and memory control functions + * @{ + */ + +/* I/O operation functions ***************************************************/ +HAL_StatusTypeDef HAL_SRAM_Read_8b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint8_t *pDstBuffer, + uint32_t BufferSize); +HAL_StatusTypeDef HAL_SRAM_Write_8b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint8_t *pSrcBuffer, + uint32_t BufferSize); +HAL_StatusTypeDef HAL_SRAM_Read_16b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint16_t *pDstBuffer, + uint32_t BufferSize); +HAL_StatusTypeDef HAL_SRAM_Write_16b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint16_t *pSrcBuffer, + uint32_t BufferSize); +HAL_StatusTypeDef HAL_SRAM_Read_32b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pDstBuffer, + uint32_t BufferSize); +HAL_StatusTypeDef HAL_SRAM_Write_32b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pSrcBuffer, + uint32_t BufferSize); +HAL_StatusTypeDef HAL_SRAM_Read_DMA(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pDstBuffer, + uint32_t BufferSize); +HAL_StatusTypeDef HAL_SRAM_Write_DMA(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pSrcBuffer, + uint32_t BufferSize); + +void HAL_SRAM_DMA_XferCpltCallback(DMA_HandleTypeDef *hdma); +void HAL_SRAM_DMA_XferErrorCallback(DMA_HandleTypeDef *hdma); + +#if (USE_HAL_SRAM_REGISTER_CALLBACKS == 1) +/* SRAM callback registering/unregistering */ +HAL_StatusTypeDef HAL_SRAM_RegisterCallback(SRAM_HandleTypeDef *hsram, HAL_SRAM_CallbackIDTypeDef CallbackId, + pSRAM_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_SRAM_UnRegisterCallback(SRAM_HandleTypeDef *hsram, HAL_SRAM_CallbackIDTypeDef CallbackId); +HAL_StatusTypeDef HAL_SRAM_RegisterDmaCallback(SRAM_HandleTypeDef *hsram, HAL_SRAM_CallbackIDTypeDef CallbackId, + pSRAM_DmaCallbackTypeDef pCallback); +#endif /* USE_HAL_SRAM_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @addtogroup SRAM_Exported_Functions_Group3 Control functions + * @{ + */ + +/* SRAM Control functions ****************************************************/ +HAL_StatusTypeDef HAL_SRAM_WriteOperation_Enable(SRAM_HandleTypeDef *hsram); +HAL_StatusTypeDef HAL_SRAM_WriteOperation_Disable(SRAM_HandleTypeDef *hsram); + +/** + * @} + */ + +/** @addtogroup SRAM_Exported_Functions_Group4 Peripheral State functions + * @{ + */ + +/* SRAM State functions ******************************************************/ +HAL_SRAM_StateTypeDef HAL_SRAM_GetState(const SRAM_HandleTypeDef *hsram); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* FMC_Bank1 || FSMC_Bank1 */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32F4xx_HAL_SRAM_H */ diff --git a/cubemx/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_uart.h b/cubemx/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_uart.h new file mode 100644 index 0000000..e6ce82f --- /dev/null +++ b/cubemx/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_uart.h @@ -0,0 +1,909 @@ +/** + ****************************************************************************** + * @file stm32f4xx_hal_uart.h + * @author MCD Application Team + * @brief Header file of UART HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_HAL_UART_H +#define __STM32F4xx_HAL_UART_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal_def.h" + +/** @addtogroup STM32F4xx_HAL_Driver + * @{ + */ + +/** @addtogroup UART + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup UART_Exported_Types UART Exported Types + * @{ + */ + +/** + * @brief UART Init Structure definition + */ +typedef struct +{ + uint32_t BaudRate; /*!< This member configures the UART communication baud rate. + The baud rate is computed using the following formula: + - IntegerDivider = ((PCLKx) / (8 * (OVR8+1) * (huart->Init.BaudRate))) + - FractionalDivider = ((IntegerDivider - ((uint32_t) IntegerDivider)) * 8 * (OVR8+1)) + 0.5 + Where OVR8 is the "oversampling by 8 mode" configuration bit in the CR1 register. */ + + uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame. + This parameter can be a value of @ref UART_Word_Length */ + + uint32_t StopBits; /*!< Specifies the number of stop bits transmitted. + This parameter can be a value of @ref UART_Stop_Bits */ + + uint32_t Parity; /*!< Specifies the parity mode. + This parameter can be a value of @ref UART_Parity + @note When parity is enabled, the computed parity is inserted + at the MSB position of the transmitted data (9th bit when + the word length is set to 9 data bits; 8th bit when the + word length is set to 8 data bits). */ + + uint32_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled. + This parameter can be a value of @ref UART_Mode */ + + uint32_t HwFlowCtl; /*!< Specifies whether the hardware flow control mode is enabled or disabled. + This parameter can be a value of @ref UART_Hardware_Flow_Control */ + + uint32_t OverSampling; /*!< Specifies whether the Over sampling 8 is enabled or disabled, to achieve higher speed (up to fPCLK/8). + This parameter can be a value of @ref UART_Over_Sampling */ +} UART_InitTypeDef; + +/** + * @brief HAL UART State structures definition + * @note HAL UART State value is a combination of 2 different substates: gState and RxState. + * - gState contains UART state information related to global Handle management + * and also information related to Tx operations. + * gState value coding follow below described bitmap : + * b7-b6 Error information + * 00 : No Error + * 01 : (Not Used) + * 10 : Timeout + * 11 : Error + * b5 Peripheral initialization status + * 0 : Reset (Peripheral not initialized) + * 1 : Init done (Peripheral initialized. HAL UART Init function already called) + * b4-b3 (not used) + * xx : Should be set to 00 + * b2 Intrinsic process state + * 0 : Ready + * 1 : Busy (Peripheral busy with some configuration or internal operations) + * b1 (not used) + * x : Should be set to 0 + * b0 Tx state + * 0 : Ready (no Tx operation ongoing) + * 1 : Busy (Tx operation ongoing) + * - RxState contains information related to Rx operations. + * RxState value coding follow below described bitmap : + * b7-b6 (not used) + * xx : Should be set to 00 + * b5 Peripheral initialization status + * 0 : Reset (Peripheral not initialized) + * 1 : Init done (Peripheral initialized) + * b4-b2 (not used) + * xxx : Should be set to 000 + * b1 Rx state + * 0 : Ready (no Rx operation ongoing) + * 1 : Busy (Rx operation ongoing) + * b0 (not used) + * x : Should be set to 0. + */ +typedef enum +{ + HAL_UART_STATE_RESET = 0x00U, /*!< Peripheral is not yet Initialized + Value is allowed for gState and RxState */ + HAL_UART_STATE_READY = 0x20U, /*!< Peripheral Initialized and ready for use + Value is allowed for gState and RxState */ + HAL_UART_STATE_BUSY = 0x24U, /*!< an internal process is ongoing + Value is allowed for gState only */ + HAL_UART_STATE_BUSY_TX = 0x21U, /*!< Data Transmission process is ongoing + Value is allowed for gState only */ + HAL_UART_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing + Value is allowed for RxState only */ + HAL_UART_STATE_BUSY_TX_RX = 0x23U, /*!< Data Transmission and Reception process is ongoing + Not to be used for neither gState nor RxState. + Value is result of combination (Or) between gState and RxState values */ + HAL_UART_STATE_TIMEOUT = 0xA0U, /*!< Timeout state + Value is allowed for gState only */ + HAL_UART_STATE_ERROR = 0xE0U /*!< Error + Value is allowed for gState only */ +} HAL_UART_StateTypeDef; + +/** + * @brief HAL UART Reception type definition + * @note HAL UART Reception type value aims to identify which type of Reception is ongoing. + * This parameter can be a value of @ref UART_Reception_Type_Values : + * HAL_UART_RECEPTION_STANDARD = 0x00U, + * HAL_UART_RECEPTION_TOIDLE = 0x01U, + */ +typedef uint32_t HAL_UART_RxTypeTypeDef; + +/** + * @brief HAL UART Rx Event type definition + * @note HAL UART Rx Event type value aims to identify which type of Event has occurred + * leading to call of the RxEvent callback. + * This parameter can be a value of @ref UART_RxEvent_Type_Values : + * HAL_UART_RXEVENT_TC = 0x00U, + * HAL_UART_RXEVENT_HT = 0x01U, + * HAL_UART_RXEVENT_IDLE = 0x02U, + */ +typedef uint32_t HAL_UART_RxEventTypeTypeDef; + +/** + * @brief UART handle Structure definition + */ +typedef struct __UART_HandleTypeDef +{ + USART_TypeDef *Instance; /*!< UART registers base address */ + + UART_InitTypeDef Init; /*!< UART communication parameters */ + + const uint8_t *pTxBuffPtr; /*!< Pointer to UART Tx transfer Buffer */ + + uint16_t TxXferSize; /*!< UART Tx Transfer size */ + + __IO uint16_t TxXferCount; /*!< UART Tx Transfer Counter */ + + uint8_t *pRxBuffPtr; /*!< Pointer to UART Rx transfer Buffer */ + + uint16_t RxXferSize; /*!< UART Rx Transfer size */ + + __IO uint16_t RxXferCount; /*!< UART Rx Transfer Counter */ + + __IO HAL_UART_RxTypeTypeDef ReceptionType; /*!< Type of ongoing reception */ + + __IO HAL_UART_RxEventTypeTypeDef RxEventType; /*!< Type of Rx Event */ + + DMA_HandleTypeDef *hdmatx; /*!< UART Tx DMA Handle parameters */ + + DMA_HandleTypeDef *hdmarx; /*!< UART Rx DMA Handle parameters */ + + HAL_LockTypeDef Lock; /*!< Locking object */ + + __IO HAL_UART_StateTypeDef gState; /*!< UART state information related to global Handle management + and also related to Tx operations. + This parameter can be a value of @ref HAL_UART_StateTypeDef */ + + __IO HAL_UART_StateTypeDef RxState; /*!< UART state information related to Rx operations. + This parameter can be a value of @ref HAL_UART_StateTypeDef */ + + __IO uint32_t ErrorCode; /*!< UART Error code */ + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + void (* TxHalfCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Tx Half Complete Callback */ + void (* TxCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Tx Complete Callback */ + void (* RxHalfCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Rx Half Complete Callback */ + void (* RxCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Rx Complete Callback */ + void (* ErrorCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Error Callback */ + void (* AbortCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Abort Complete Callback */ + void (* AbortTransmitCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Abort Transmit Complete Callback */ + void (* AbortReceiveCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Abort Receive Complete Callback */ + void (* WakeupCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Wakeup Callback */ + void (* RxEventCallback)(struct __UART_HandleTypeDef *huart, uint16_t Pos); /*!< UART Reception Event Callback */ + + void (* MspInitCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Msp Init callback */ + void (* MspDeInitCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Msp DeInit callback */ +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + +} UART_HandleTypeDef; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) +/** + * @brief HAL UART Callback ID enumeration definition + */ +typedef enum +{ + HAL_UART_TX_HALFCOMPLETE_CB_ID = 0x00U, /*!< UART Tx Half Complete Callback ID */ + HAL_UART_TX_COMPLETE_CB_ID = 0x01U, /*!< UART Tx Complete Callback ID */ + HAL_UART_RX_HALFCOMPLETE_CB_ID = 0x02U, /*!< UART Rx Half Complete Callback ID */ + HAL_UART_RX_COMPLETE_CB_ID = 0x03U, /*!< UART Rx Complete Callback ID */ + HAL_UART_ERROR_CB_ID = 0x04U, /*!< UART Error Callback ID */ + HAL_UART_ABORT_COMPLETE_CB_ID = 0x05U, /*!< UART Abort Complete Callback ID */ + HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID = 0x06U, /*!< UART Abort Transmit Complete Callback ID */ + HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID = 0x07U, /*!< UART Abort Receive Complete Callback ID */ + HAL_UART_WAKEUP_CB_ID = 0x08U, /*!< UART Wakeup Callback ID */ + + HAL_UART_MSPINIT_CB_ID = 0x0BU, /*!< UART MspInit callback ID */ + HAL_UART_MSPDEINIT_CB_ID = 0x0CU /*!< UART MspDeInit callback ID */ + +} HAL_UART_CallbackIDTypeDef; + +/** + * @brief HAL UART Callback pointer definition + */ +typedef void (*pUART_CallbackTypeDef)(UART_HandleTypeDef *huart); /*!< pointer to an UART callback function */ +typedef void (*pUART_RxEventCallbackTypeDef)(struct __UART_HandleTypeDef *huart, uint16_t Pos); /*!< pointer to a UART Rx Event specific callback function */ + +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup UART_Exported_Constants UART Exported Constants + * @{ + */ + +/** @defgroup UART_Error_Code UART Error Code + * @{ + */ +#define HAL_UART_ERROR_NONE 0x00000000U /*!< No error */ +#define HAL_UART_ERROR_PE 0x00000001U /*!< Parity error */ +#define HAL_UART_ERROR_NE 0x00000002U /*!< Noise error */ +#define HAL_UART_ERROR_FE 0x00000004U /*!< Frame error */ +#define HAL_UART_ERROR_ORE 0x00000008U /*!< Overrun error */ +#define HAL_UART_ERROR_DMA 0x00000010U /*!< DMA transfer error */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) +#define HAL_UART_ERROR_INVALID_CALLBACK 0x00000020U /*!< Invalid Callback error */ +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @defgroup UART_Word_Length UART Word Length + * @{ + */ +#define UART_WORDLENGTH_8B 0x00000000U +#define UART_WORDLENGTH_9B ((uint32_t)USART_CR1_M) +/** + * @} + */ + +/** @defgroup UART_Stop_Bits UART Number of Stop Bits + * @{ + */ +#define UART_STOPBITS_1 0x00000000U +#define UART_STOPBITS_2 ((uint32_t)USART_CR2_STOP_1) +/** + * @} + */ + +/** @defgroup UART_Parity UART Parity + * @{ + */ +#define UART_PARITY_NONE 0x00000000U +#define UART_PARITY_EVEN ((uint32_t)USART_CR1_PCE) +#define UART_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS)) +/** + * @} + */ + +/** @defgroup UART_Hardware_Flow_Control UART Hardware Flow Control + * @{ + */ +#define UART_HWCONTROL_NONE 0x00000000U +#define UART_HWCONTROL_RTS ((uint32_t)USART_CR3_RTSE) +#define UART_HWCONTROL_CTS ((uint32_t)USART_CR3_CTSE) +#define UART_HWCONTROL_RTS_CTS ((uint32_t)(USART_CR3_RTSE | USART_CR3_CTSE)) +/** + * @} + */ + +/** @defgroup UART_Mode UART Transfer Mode + * @{ + */ +#define UART_MODE_RX ((uint32_t)USART_CR1_RE) +#define UART_MODE_TX ((uint32_t)USART_CR1_TE) +#define UART_MODE_TX_RX ((uint32_t)(USART_CR1_TE | USART_CR1_RE)) +/** + * @} + */ + +/** @defgroup UART_State UART State + * @{ + */ +#define UART_STATE_DISABLE 0x00000000U +#define UART_STATE_ENABLE ((uint32_t)USART_CR1_UE) +/** + * @} + */ + +/** @defgroup UART_Over_Sampling UART Over Sampling + * @{ + */ +#define UART_OVERSAMPLING_16 0x00000000U +#define UART_OVERSAMPLING_8 ((uint32_t)USART_CR1_OVER8) +/** + * @} + */ + +/** @defgroup UART_LIN_Break_Detection_Length UART LIN Break Detection Length + * @{ + */ +#define UART_LINBREAKDETECTLENGTH_10B 0x00000000U +#define UART_LINBREAKDETECTLENGTH_11B ((uint32_t)USART_CR2_LBDL) +/** + * @} + */ + +/** @defgroup UART_WakeUp_functions UART Wakeup Functions + * @{ + */ +#define UART_WAKEUPMETHOD_IDLELINE 0x00000000U +#define UART_WAKEUPMETHOD_ADDRESSMARK ((uint32_t)USART_CR1_WAKE) +/** + * @} + */ + +/** @defgroup UART_Flags UART FLags + * Elements values convention: 0xXXXX + * - 0xXXXX : Flag mask in the SR register + * @{ + */ +#define UART_FLAG_CTS ((uint32_t)USART_SR_CTS) +#define UART_FLAG_LBD ((uint32_t)USART_SR_LBD) +#define UART_FLAG_TXE ((uint32_t)USART_SR_TXE) +#define UART_FLAG_TC ((uint32_t)USART_SR_TC) +#define UART_FLAG_RXNE ((uint32_t)USART_SR_RXNE) +#define UART_FLAG_IDLE ((uint32_t)USART_SR_IDLE) +#define UART_FLAG_ORE ((uint32_t)USART_SR_ORE) +#define UART_FLAG_NE ((uint32_t)USART_SR_NE) +#define UART_FLAG_FE ((uint32_t)USART_SR_FE) +#define UART_FLAG_PE ((uint32_t)USART_SR_PE) +/** + * @} + */ + +/** @defgroup UART_Interrupt_definition UART Interrupt Definitions + * Elements values convention: 0xY000XXXX + * - XXXX : Interrupt mask (16 bits) in the Y register + * - Y : Interrupt source register (2bits) + * - 0001: CR1 register + * - 0010: CR2 register + * - 0011: CR3 register + * @{ + */ + +#define UART_IT_PE ((uint32_t)(UART_CR1_REG_INDEX << 28U | USART_CR1_PEIE)) +#define UART_IT_TXE ((uint32_t)(UART_CR1_REG_INDEX << 28U | USART_CR1_TXEIE)) +#define UART_IT_TC ((uint32_t)(UART_CR1_REG_INDEX << 28U | USART_CR1_TCIE)) +#define UART_IT_RXNE ((uint32_t)(UART_CR1_REG_INDEX << 28U | USART_CR1_RXNEIE)) +#define UART_IT_IDLE ((uint32_t)(UART_CR1_REG_INDEX << 28U | USART_CR1_IDLEIE)) + +#define UART_IT_LBD ((uint32_t)(UART_CR2_REG_INDEX << 28U | USART_CR2_LBDIE)) + +#define UART_IT_CTS ((uint32_t)(UART_CR3_REG_INDEX << 28U | USART_CR3_CTSIE)) +#define UART_IT_ERR ((uint32_t)(UART_CR3_REG_INDEX << 28U | USART_CR3_EIE)) +/** + * @} + */ + +/** @defgroup UART_Reception_Type_Values UART Reception type values + * @{ + */ +#define HAL_UART_RECEPTION_STANDARD (0x00000000U) /*!< Standard reception */ +#define HAL_UART_RECEPTION_TOIDLE (0x00000001U) /*!< Reception till completion or IDLE event */ +/** + * @} + */ + +/** @defgroup UART_RxEvent_Type_Values UART RxEvent type values + * @{ + */ +#define HAL_UART_RXEVENT_TC (0x00000000U) /*!< RxEvent linked to Transfer Complete event */ +#define HAL_UART_RXEVENT_HT (0x00000001U) /*!< RxEvent linked to Half Transfer event */ +#define HAL_UART_RXEVENT_IDLE (0x00000002U) +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup UART_Exported_Macros UART Exported Macros + * @{ + */ + +/** @brief Reset UART handle gstate & RxState + * @param __HANDLE__ specifies the UART Handle. + * UART Handle selects the USARTx or UARTy peripheral + * (USART,UART availability and x,y values depending on device). + * @retval None + */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) +#define __HAL_UART_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->gState = HAL_UART_STATE_RESET; \ + (__HANDLE__)->RxState = HAL_UART_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0U) +#else +#define __HAL_UART_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->gState = HAL_UART_STATE_RESET; \ + (__HANDLE__)->RxState = HAL_UART_STATE_RESET; \ + } while(0U) +#endif /*USE_HAL_UART_REGISTER_CALLBACKS */ + +/** @brief Flushes the UART DR register + * @param __HANDLE__ specifies the UART Handle. + * UART Handle selects the USARTx or UARTy peripheral + * (USART,UART availability and x,y values depending on device). + */ +#define __HAL_UART_FLUSH_DRREGISTER(__HANDLE__) ((__HANDLE__)->Instance->DR) + +/** @brief Checks whether the specified UART flag is set or not. + * @param __HANDLE__ specifies the UART Handle. + * UART Handle selects the USARTx or UARTy peripheral + * (USART,UART availability and x,y values depending on device). + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg UART_FLAG_CTS: CTS Change flag (not available for UART4 and UART5) + * @arg UART_FLAG_LBD: LIN Break detection flag + * @arg UART_FLAG_TXE: Transmit data register empty flag + * @arg UART_FLAG_TC: Transmission Complete flag + * @arg UART_FLAG_RXNE: Receive data register not empty flag + * @arg UART_FLAG_IDLE: Idle Line detection flag + * @arg UART_FLAG_ORE: Overrun Error flag + * @arg UART_FLAG_NE: Noise Error flag + * @arg UART_FLAG_FE: Framing Error flag + * @arg UART_FLAG_PE: Parity Error flag + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_UART_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__)) + +/** @brief Clears the specified UART pending flag. + * @param __HANDLE__ specifies the UART Handle. + * UART Handle selects the USARTx or UARTy peripheral + * (USART,UART availability and x,y values depending on device). + * @param __FLAG__ specifies the flag to check. + * This parameter can be any combination of the following values: + * @arg UART_FLAG_CTS: CTS Change flag (not available for UART4 and UART5). + * @arg UART_FLAG_LBD: LIN Break detection flag. + * @arg UART_FLAG_TC: Transmission Complete flag. + * @arg UART_FLAG_RXNE: Receive data register not empty flag. + * + * @note PE (Parity error), FE (Framing error), NE (Noise error), ORE (Overrun + * error) and IDLE (Idle line detected) flags are cleared by software + * sequence: a read operation to USART_SR register followed by a read + * operation to USART_DR register. + * @note RXNE flag can be also cleared by a read to the USART_DR register. + * @note TC flag can be also cleared by software sequence: a read operation to + * USART_SR register followed by a write operation to USART_DR register. + * @note TXE flag is cleared only by a write to the USART_DR register. + * + * @retval None + */ +#define __HAL_UART_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__)) + +/** @brief Clears the UART PE pending flag. + * @param __HANDLE__ specifies the UART Handle. + * UART Handle selects the USARTx or UARTy peripheral + * (USART,UART availability and x,y values depending on device). + * @retval None + */ +#define __HAL_UART_CLEAR_PEFLAG(__HANDLE__) \ + do{ \ + __IO uint32_t tmpreg = 0x00U; \ + tmpreg = (__HANDLE__)->Instance->SR; \ + tmpreg = (__HANDLE__)->Instance->DR; \ + UNUSED(tmpreg); \ + } while(0U) + +/** @brief Clears the UART FE pending flag. + * @param __HANDLE__ specifies the UART Handle. + * UART Handle selects the USARTx or UARTy peripheral + * (USART,UART availability and x,y values depending on device). + * @retval None + */ +#define __HAL_UART_CLEAR_FEFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__) + +/** @brief Clears the UART NE pending flag. + * @param __HANDLE__ specifies the UART Handle. + * UART Handle selects the USARTx or UARTy peripheral + * (USART,UART availability and x,y values depending on device). + * @retval None + */ +#define __HAL_UART_CLEAR_NEFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__) + +/** @brief Clears the UART ORE pending flag. + * @param __HANDLE__ specifies the UART Handle. + * UART Handle selects the USARTx or UARTy peripheral + * (USART,UART availability and x,y values depending on device). + * @retval None + */ +#define __HAL_UART_CLEAR_OREFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__) + +/** @brief Clears the UART IDLE pending flag. + * @param __HANDLE__ specifies the UART Handle. + * UART Handle selects the USARTx or UARTy peripheral + * (USART,UART availability and x,y values depending on device). + * @retval None + */ +#define __HAL_UART_CLEAR_IDLEFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__) + +/** @brief Enable the specified UART interrupt. + * @param __HANDLE__ specifies the UART Handle. + * UART Handle selects the USARTx or UARTy peripheral + * (USART,UART availability and x,y values depending on device). + * @param __INTERRUPT__ specifies the UART interrupt source to enable. + * This parameter can be one of the following values: + * @arg UART_IT_CTS: CTS change interrupt + * @arg UART_IT_LBD: LIN Break detection interrupt + * @arg UART_IT_TXE: Transmit Data Register empty interrupt + * @arg UART_IT_TC: Transmission complete interrupt + * @arg UART_IT_RXNE: Receive Data register not empty interrupt + * @arg UART_IT_IDLE: Idle line detection interrupt + * @arg UART_IT_PE: Parity Error interrupt + * @arg UART_IT_ERR: Error interrupt(Frame error, noise error, overrun error) + * @retval None + */ +#define __HAL_UART_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28U) == UART_CR1_REG_INDEX)? ((__HANDLE__)->Instance->CR1 |= ((__INTERRUPT__) & UART_IT_MASK)): \ + (((__INTERRUPT__) >> 28U) == UART_CR2_REG_INDEX)? ((__HANDLE__)->Instance->CR2 |= ((__INTERRUPT__) & UART_IT_MASK)): \ + ((__HANDLE__)->Instance->CR3 |= ((__INTERRUPT__) & UART_IT_MASK))) + +/** @brief Disable the specified UART interrupt. + * @param __HANDLE__ specifies the UART Handle. + * UART Handle selects the USARTx or UARTy peripheral + * (USART,UART availability and x,y values depending on device). + * @param __INTERRUPT__ specifies the UART interrupt source to disable. + * This parameter can be one of the following values: + * @arg UART_IT_CTS: CTS change interrupt + * @arg UART_IT_LBD: LIN Break detection interrupt + * @arg UART_IT_TXE: Transmit Data Register empty interrupt + * @arg UART_IT_TC: Transmission complete interrupt + * @arg UART_IT_RXNE: Receive Data register not empty interrupt + * @arg UART_IT_IDLE: Idle line detection interrupt + * @arg UART_IT_PE: Parity Error interrupt + * @arg UART_IT_ERR: Error interrupt(Frame error, noise error, overrun error) + * @retval None + */ +#define __HAL_UART_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28U) == UART_CR1_REG_INDEX)? ((__HANDLE__)->Instance->CR1 &= ~((__INTERRUPT__) & UART_IT_MASK)): \ + (((__INTERRUPT__) >> 28U) == UART_CR2_REG_INDEX)? ((__HANDLE__)->Instance->CR2 &= ~((__INTERRUPT__) & UART_IT_MASK)): \ + ((__HANDLE__)->Instance->CR3 &= ~ ((__INTERRUPT__) & UART_IT_MASK))) + +/** @brief Checks whether the specified UART interrupt source is enabled or not. + * @param __HANDLE__ specifies the UART Handle. + * UART Handle selects the USARTx or UARTy peripheral + * (USART,UART availability and x,y values depending on device). + * @param __IT__ specifies the UART interrupt source to check. + * This parameter can be one of the following values: + * @arg UART_IT_CTS: CTS change interrupt (not available for UART4 and UART5) + * @arg UART_IT_LBD: LIN Break detection interrupt + * @arg UART_IT_TXE: Transmit Data Register empty interrupt + * @arg UART_IT_TC: Transmission complete interrupt + * @arg UART_IT_RXNE: Receive Data register not empty interrupt + * @arg UART_IT_IDLE: Idle line detection interrupt + * @arg UART_IT_ERR: Error interrupt + * @retval The new state of __IT__ (TRUE or FALSE). + */ +#define __HAL_UART_GET_IT_SOURCE(__HANDLE__, __IT__) (((((__IT__) >> 28U) == UART_CR1_REG_INDEX)? (__HANDLE__)->Instance->CR1:(((((uint32_t)(__IT__)) >> 28U) == UART_CR2_REG_INDEX)? \ + (__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & (((uint32_t)(__IT__)) & UART_IT_MASK)) + +/** @brief Enable CTS flow control + * @note This macro allows to enable CTS hardware flow control for a given UART instance, + * without need to call HAL_UART_Init() function. + * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. + * @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need + * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : + * - UART instance should have already been initialised (through call of HAL_UART_Init() ) + * - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__)) + * and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)). + * @param __HANDLE__ specifies the UART Handle. + * The Handle Instance can be any USARTx (supporting the HW Flow control feature). + * It is used to select the USART peripheral (USART availability and x value depending on device). + * @retval None + */ +#define __HAL_UART_HWCONTROL_CTS_ENABLE(__HANDLE__) \ + do{ \ + ATOMIC_SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \ + (__HANDLE__)->Init.HwFlowCtl |= USART_CR3_CTSE; \ + } while(0U) + +/** @brief Disable CTS flow control + * @note This macro allows to disable CTS hardware flow control for a given UART instance, + * without need to call HAL_UART_Init() function. + * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. + * @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need + * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : + * - UART instance should have already been initialised (through call of HAL_UART_Init() ) + * - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__)) + * and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)). + * @param __HANDLE__ specifies the UART Handle. + * The Handle Instance can be any USARTx (supporting the HW Flow control feature). + * It is used to select the USART peripheral (USART availability and x value depending on device). + * @retval None + */ +#define __HAL_UART_HWCONTROL_CTS_DISABLE(__HANDLE__) \ + do{ \ + ATOMIC_CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \ + (__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_CTSE); \ + } while(0U) + +/** @brief Enable RTS flow control + * This macro allows to enable RTS hardware flow control for a given UART instance, + * without need to call HAL_UART_Init() function. + * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. + * @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need + * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : + * - UART instance should have already been initialised (through call of HAL_UART_Init() ) + * - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__)) + * and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)). + * @param __HANDLE__ specifies the UART Handle. + * The Handle Instance can be any USARTx (supporting the HW Flow control feature). + * It is used to select the USART peripheral (USART availability and x value depending on device). + * @retval None + */ +#define __HAL_UART_HWCONTROL_RTS_ENABLE(__HANDLE__) \ + do{ \ + ATOMIC_SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE); \ + (__HANDLE__)->Init.HwFlowCtl |= USART_CR3_RTSE; \ + } while(0U) + +/** @brief Disable RTS flow control + * This macro allows to disable RTS hardware flow control for a given UART instance, + * without need to call HAL_UART_Init() function. + * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. + * @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need + * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : + * - UART instance should have already been initialised (through call of HAL_UART_Init() ) + * - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__)) + * and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)). + * @param __HANDLE__ specifies the UART Handle. + * The Handle Instance can be any USARTx (supporting the HW Flow control feature). + * It is used to select the USART peripheral (USART availability and x value depending on device). + * @retval None + */ +#define __HAL_UART_HWCONTROL_RTS_DISABLE(__HANDLE__) \ + do{ \ + ATOMIC_CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE);\ + (__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_RTSE); \ + } while(0U) + +/** @brief Macro to enable the UART's one bit sample method + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT) + +/** @brief Macro to disable the UART's one bit sample method + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3\ + &= (uint16_t)~((uint16_t)USART_CR3_ONEBIT)) + +/** @brief Enable UART + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE) + +/** @brief Disable UART + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE) +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup UART_Exported_Functions + * @{ + */ + +/** @addtogroup UART_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ + +/* Initialization/de-initialization functions **********************************/ +HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength); +HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethod); +HAL_StatusTypeDef HAL_UART_DeInit(UART_HandleTypeDef *huart); +void HAL_UART_MspInit(UART_HandleTypeDef *huart); +void HAL_UART_MspDeInit(UART_HandleTypeDef *huart); + +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) +HAL_StatusTypeDef HAL_UART_RegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID, + pUART_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_UART_UnRegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID); + +HAL_StatusTypeDef HAL_UART_RegisterRxEventCallback(UART_HandleTypeDef *huart, pUART_RxEventCallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_UART_UnRegisterRxEventCallback(UART_HandleTypeDef *huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @addtogroup UART_Exported_Functions_Group2 IO operation functions + * @{ + */ + +/* IO operation functions *******************************************************/ +HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart); + +HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint16_t *RxLen, + uint32_t Timeout); +HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); + +HAL_UART_RxEventTypeTypeDef HAL_UARTEx_GetRxEventType(UART_HandleTypeDef *huart); + +/* Transfer Abort functions */ +HAL_StatusTypeDef HAL_UART_Abort(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_AbortTransmit(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_AbortReceive(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_Abort_IT(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_AbortTransmit_IT(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_AbortReceive_IT(UART_HandleTypeDef *huart); + +void HAL_UART_IRQHandler(UART_HandleTypeDef *huart); +void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart); +void HAL_UART_TxHalfCpltCallback(UART_HandleTypeDef *huart); +void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart); +void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart); +void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart); +void HAL_UART_AbortCpltCallback(UART_HandleTypeDef *huart); +void HAL_UART_AbortTransmitCpltCallback(UART_HandleTypeDef *huart); +void HAL_UART_AbortReceiveCpltCallback(UART_HandleTypeDef *huart); + +void HAL_UARTEx_RxEventCallback(UART_HandleTypeDef *huart, uint16_t Size); + +/** + * @} + */ + +/** @addtogroup UART_Exported_Functions_Group3 + * @{ + */ +/* Peripheral Control functions ************************************************/ +HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_MultiProcessor_EnterMuteMode(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_MultiProcessor_ExitMuteMode(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart); +/** + * @} + */ + +/** @addtogroup UART_Exported_Functions_Group4 + * @{ + */ +/* Peripheral State functions **************************************************/ +HAL_UART_StateTypeDef HAL_UART_GetState(const UART_HandleTypeDef *huart); +uint32_t HAL_UART_GetError(const UART_HandleTypeDef *huart); +/** + * @} + */ + +/** + * @} + */ +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup UART_Private_Constants UART Private Constants + * @{ + */ +/** @brief UART interruptions flag mask + * + */ +#define UART_IT_MASK 0x0000FFFFU + +#define UART_CR1_REG_INDEX 1U +#define UART_CR2_REG_INDEX 2U +#define UART_CR3_REG_INDEX 3U +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup UART_Private_Macros UART Private Macros + * @{ + */ +#define IS_UART_WORD_LENGTH(LENGTH) (((LENGTH) == UART_WORDLENGTH_8B) || \ + ((LENGTH) == UART_WORDLENGTH_9B)) +#define IS_UART_LIN_WORD_LENGTH(LENGTH) (((LENGTH) == UART_WORDLENGTH_8B)) +#define IS_UART_STOPBITS(STOPBITS) (((STOPBITS) == UART_STOPBITS_1) || \ + ((STOPBITS) == UART_STOPBITS_2)) +#define IS_UART_PARITY(PARITY) (((PARITY) == UART_PARITY_NONE) || \ + ((PARITY) == UART_PARITY_EVEN) || \ + ((PARITY) == UART_PARITY_ODD)) +#define IS_UART_HARDWARE_FLOW_CONTROL(CONTROL)\ + (((CONTROL) == UART_HWCONTROL_NONE) || \ + ((CONTROL) == UART_HWCONTROL_RTS) || \ + ((CONTROL) == UART_HWCONTROL_CTS) || \ + ((CONTROL) == UART_HWCONTROL_RTS_CTS)) +#define IS_UART_MODE(MODE) ((((MODE) & 0x0000FFF3U) == 0x00U) && ((MODE) != 0x00U)) +#define IS_UART_STATE(STATE) (((STATE) == UART_STATE_DISABLE) || \ + ((STATE) == UART_STATE_ENABLE)) +#define IS_UART_OVERSAMPLING(SAMPLING) (((SAMPLING) == UART_OVERSAMPLING_16) || \ + ((SAMPLING) == UART_OVERSAMPLING_8)) +#define IS_UART_LIN_OVERSAMPLING(SAMPLING) (((SAMPLING) == UART_OVERSAMPLING_16)) +#define IS_UART_LIN_BREAK_DETECT_LENGTH(LENGTH) (((LENGTH) == UART_LINBREAKDETECTLENGTH_10B) || \ + ((LENGTH) == UART_LINBREAKDETECTLENGTH_11B)) +#define IS_UART_WAKEUPMETHOD(WAKEUP) (((WAKEUP) == UART_WAKEUPMETHOD_IDLELINE) || \ + ((WAKEUP) == UART_WAKEUPMETHOD_ADDRESSMARK)) +#define IS_UART_BAUDRATE(BAUDRATE) ((BAUDRATE) <= 10500000U) +#define IS_UART_ADDRESS(ADDRESS) ((ADDRESS) <= 0x0FU) + +#define UART_DIV_SAMPLING16(_PCLK_, _BAUD_) ((uint32_t)((((uint64_t)(_PCLK_))*25U)/(4U*((uint64_t)(_BAUD_))))) +#define UART_DIVMANT_SAMPLING16(_PCLK_, _BAUD_) (UART_DIV_SAMPLING16((_PCLK_), (_BAUD_))/100U) +#define UART_DIVFRAQ_SAMPLING16(_PCLK_, _BAUD_) ((((UART_DIV_SAMPLING16((_PCLK_), (_BAUD_)) - (UART_DIVMANT_SAMPLING16((_PCLK_), (_BAUD_)) * 100U)) * 16U)\ + + 50U) / 100U) +/* UART BRR = mantissa + overflow + fraction + = (UART DIVMANT << 4) + (UART DIVFRAQ & 0xF0) + (UART DIVFRAQ & 0x0FU) */ +#define UART_BRR_SAMPLING16(_PCLK_, _BAUD_) ((UART_DIVMANT_SAMPLING16((_PCLK_), (_BAUD_)) << 4U) + \ + (UART_DIVFRAQ_SAMPLING16((_PCLK_), (_BAUD_)) & 0xF0U) + \ + (UART_DIVFRAQ_SAMPLING16((_PCLK_), (_BAUD_)) & 0x0FU)) + +#define UART_DIV_SAMPLING8(_PCLK_, _BAUD_) ((uint32_t)((((uint64_t)(_PCLK_))*25U)/(2U*((uint64_t)(_BAUD_))))) +#define UART_DIVMANT_SAMPLING8(_PCLK_, _BAUD_) (UART_DIV_SAMPLING8((_PCLK_), (_BAUD_))/100U) +#define UART_DIVFRAQ_SAMPLING8(_PCLK_, _BAUD_) ((((UART_DIV_SAMPLING8((_PCLK_), (_BAUD_)) - (UART_DIVMANT_SAMPLING8((_PCLK_), (_BAUD_)) * 100U)) * 8U)\ + + 50U) / 100U) +/* UART BRR = mantissa + overflow + fraction + = (UART DIVMANT << 4) + ((UART DIVFRAQ & 0xF8) << 1) + (UART DIVFRAQ & 0x07U) */ +#define UART_BRR_SAMPLING8(_PCLK_, _BAUD_) ((UART_DIVMANT_SAMPLING8((_PCLK_), (_BAUD_)) << 4U) + \ + ((UART_DIVFRAQ_SAMPLING8((_PCLK_), (_BAUD_)) & 0xF8U) << 1U) + \ + (UART_DIVFRAQ_SAMPLING8((_PCLK_), (_BAUD_)) & 0x07U)) + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @defgroup UART_Private_Functions UART Private Functions + * @{ + */ + +HAL_StatusTypeDef UART_Start_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef UART_Start_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F4xx_HAL_UART_H */ + diff --git a/cubemx/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_fsmc.h b/cubemx/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_fsmc.h new file mode 100644 index 0000000..ebfee75 --- /dev/null +++ b/cubemx/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_fsmc.h @@ -0,0 +1,1093 @@ +/** + ****************************************************************************** + * @file stm32f4xx_ll_fsmc.h + * @author MCD Application Team + * @brief Header file of FSMC HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32F4xx_LL_FSMC_H +#define STM32F4xx_LL_FSMC_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal_def.h" + +/** @addtogroup STM32F4xx_HAL_Driver + * @{ + */ + +/** @addtogroup FSMC_LL + * @{ + */ + +/** @addtogroup FSMC_LL_Private_Macros + * @{ + */ +#if defined(FSMC_Bank1) + +#define IS_FSMC_NORSRAM_BANK(__BANK__) (((__BANK__) == FSMC_NORSRAM_BANK1) || \ + ((__BANK__) == FSMC_NORSRAM_BANK2) || \ + ((__BANK__) == FSMC_NORSRAM_BANK3) || \ + ((__BANK__) == FSMC_NORSRAM_BANK4)) +#define IS_FSMC_MUX(__MUX__) (((__MUX__) == FSMC_DATA_ADDRESS_MUX_DISABLE) || \ + ((__MUX__) == FSMC_DATA_ADDRESS_MUX_ENABLE)) +#define IS_FSMC_MEMORY(__MEMORY__) (((__MEMORY__) == FSMC_MEMORY_TYPE_SRAM) || \ + ((__MEMORY__) == FSMC_MEMORY_TYPE_PSRAM)|| \ + ((__MEMORY__) == FSMC_MEMORY_TYPE_NOR)) +#define IS_FSMC_NORSRAM_MEMORY_WIDTH(__WIDTH__) (((__WIDTH__) == FSMC_NORSRAM_MEM_BUS_WIDTH_8) || \ + ((__WIDTH__) == FSMC_NORSRAM_MEM_BUS_WIDTH_16) || \ + ((__WIDTH__) == FSMC_NORSRAM_MEM_BUS_WIDTH_32)) +#define IS_FSMC_PAGESIZE(__SIZE__) (((__SIZE__) == FSMC_PAGE_SIZE_NONE) || \ + ((__SIZE__) == FSMC_PAGE_SIZE_128) || \ + ((__SIZE__) == FSMC_PAGE_SIZE_256) || \ + ((__SIZE__) == FSMC_PAGE_SIZE_512) || \ + ((__SIZE__) == FSMC_PAGE_SIZE_1024)) +#if defined(FSMC_BCR1_WFDIS) +#define IS_FSMC_WRITE_FIFO(__FIFO__) (((__FIFO__) == FSMC_WRITE_FIFO_DISABLE) || \ + ((__FIFO__) == FSMC_WRITE_FIFO_ENABLE)) +#endif /* FSMC_BCR1_WFDIS */ +#define IS_FSMC_ACCESS_MODE(__MODE__) (((__MODE__) == FSMC_ACCESS_MODE_A) || \ + ((__MODE__) == FSMC_ACCESS_MODE_B) || \ + ((__MODE__) == FSMC_ACCESS_MODE_C) || \ + ((__MODE__) == FSMC_ACCESS_MODE_D)) +#define IS_FSMC_BURSTMODE(__STATE__) (((__STATE__) == FSMC_BURST_ACCESS_MODE_DISABLE) || \ + ((__STATE__) == FSMC_BURST_ACCESS_MODE_ENABLE)) +#define IS_FSMC_WAIT_POLARITY(__POLARITY__) (((__POLARITY__) == FSMC_WAIT_SIGNAL_POLARITY_LOW) || \ + ((__POLARITY__) == FSMC_WAIT_SIGNAL_POLARITY_HIGH)) +#define IS_FSMC_WRAP_MODE(__MODE__) (((__MODE__) == FSMC_WRAP_MODE_DISABLE) || \ + ((__MODE__) == FSMC_WRAP_MODE_ENABLE)) +#define IS_FSMC_WAIT_SIGNAL_ACTIVE(__ACTIVE__) (((__ACTIVE__) == FSMC_WAIT_TIMING_BEFORE_WS) || \ + ((__ACTIVE__) == FSMC_WAIT_TIMING_DURING_WS)) +#define IS_FSMC_WRITE_OPERATION(__OPERATION__) (((__OPERATION__) == FSMC_WRITE_OPERATION_DISABLE) || \ + ((__OPERATION__) == FSMC_WRITE_OPERATION_ENABLE)) +#define IS_FSMC_WAITE_SIGNAL(__SIGNAL__) (((__SIGNAL__) == FSMC_WAIT_SIGNAL_DISABLE) || \ + ((__SIGNAL__) == FSMC_WAIT_SIGNAL_ENABLE)) +#define IS_FSMC_EXTENDED_MODE(__MODE__) (((__MODE__) == FSMC_EXTENDED_MODE_DISABLE) || \ + ((__MODE__) == FSMC_EXTENDED_MODE_ENABLE)) +#define IS_FSMC_ASYNWAIT(__STATE__) (((__STATE__) == FSMC_ASYNCHRONOUS_WAIT_DISABLE) || \ + ((__STATE__) == FSMC_ASYNCHRONOUS_WAIT_ENABLE)) +#define IS_FSMC_DATA_LATENCY(__LATENCY__) (((__LATENCY__) > 1U) && ((__LATENCY__) <= 17U)) +#define IS_FSMC_WRITE_BURST(__BURST__) (((__BURST__) == FSMC_WRITE_BURST_DISABLE) || \ + ((__BURST__) == FSMC_WRITE_BURST_ENABLE)) +#define IS_FSMC_CONTINOUS_CLOCK(__CCLOCK__) (((__CCLOCK__) == FSMC_CONTINUOUS_CLOCK_SYNC_ONLY) || \ + ((__CCLOCK__) == FSMC_CONTINUOUS_CLOCK_SYNC_ASYNC)) +#define IS_FSMC_ADDRESS_SETUP_TIME(__TIME__) ((__TIME__) <= 15U) +#define IS_FSMC_ADDRESS_HOLD_TIME(__TIME__) (((__TIME__) > 0U) && ((__TIME__) <= 15U)) +#define IS_FSMC_DATASETUP_TIME(__TIME__) (((__TIME__) > 0U) && ((__TIME__) <= 255U)) +#define IS_FSMC_DATAHOLD_DURATION(__DATAHOLD__) ((__DATAHOLD__) <= 3U) +#define IS_FSMC_TURNAROUND_TIME(__TIME__) ((__TIME__) <= 15U) +#define IS_FSMC_CLK_DIV(__DIV__) (((__DIV__) > 1U) && ((__DIV__) <= 16U)) +#define IS_FSMC_NORSRAM_DEVICE(__INSTANCE__) ((__INSTANCE__) == FSMC_NORSRAM_DEVICE) +#define IS_FSMC_NORSRAM_EXTENDED_DEVICE(__INSTANCE__) ((__INSTANCE__) == FSMC_NORSRAM_EXTENDED_DEVICE) + +#endif /* FSMC_Bank1 */ +#if defined(FSMC_Bank2_3) + +#define IS_FSMC_NAND_BANK(__BANK__) (((__BANK__) == FSMC_NAND_BANK2) || \ + ((__BANK__) == FSMC_NAND_BANK3)) +#define IS_FSMC_WAIT_FEATURE(__FEATURE__) (((__FEATURE__) == FSMC_NAND_PCC_WAIT_FEATURE_DISABLE) || \ + ((__FEATURE__) == FSMC_NAND_PCC_WAIT_FEATURE_ENABLE)) +#define IS_FSMC_NAND_MEMORY_WIDTH(__WIDTH__) (((__WIDTH__) == FSMC_NAND_PCC_MEM_BUS_WIDTH_8) || \ + ((__WIDTH__) == FSMC_NAND_PCC_MEM_BUS_WIDTH_16)) +#define IS_FSMC_ECC_STATE(__STATE__) (((__STATE__) == FSMC_NAND_ECC_DISABLE) || \ + ((__STATE__) == FSMC_NAND_ECC_ENABLE)) + +#define IS_FSMC_ECCPAGE_SIZE(__SIZE__) (((__SIZE__) == FSMC_NAND_ECC_PAGE_SIZE_256BYTE) || \ + ((__SIZE__) == FSMC_NAND_ECC_PAGE_SIZE_512BYTE) || \ + ((__SIZE__) == FSMC_NAND_ECC_PAGE_SIZE_1024BYTE) || \ + ((__SIZE__) == FSMC_NAND_ECC_PAGE_SIZE_2048BYTE) || \ + ((__SIZE__) == FSMC_NAND_ECC_PAGE_SIZE_4096BYTE) || \ + ((__SIZE__) == FSMC_NAND_ECC_PAGE_SIZE_8192BYTE)) +#define IS_FSMC_TCLR_TIME(__TIME__) ((__TIME__) <= 255U) +#define IS_FSMC_TAR_TIME(__TIME__) ((__TIME__) <= 255U) +#define IS_FSMC_SETUP_TIME(__TIME__) ((__TIME__) <= 254U) +#define IS_FSMC_WAIT_TIME(__TIME__) ((__TIME__) <= 254U) +#define IS_FSMC_HOLD_TIME(__TIME__) ((__TIME__) <= 254U) +#define IS_FSMC_HIZ_TIME(__TIME__) ((__TIME__) <= 254U) +#define IS_FSMC_NAND_DEVICE(__INSTANCE__) ((__INSTANCE__) == FSMC_NAND_DEVICE) + +#endif /* FSMC_Bank2_3 */ +#if defined(FSMC_Bank4) +#define IS_FSMC_PCCARD_DEVICE(__INSTANCE__) ((__INSTANCE__) == FSMC_PCCARD_DEVICE) + +#endif /* FSMC_Bank4 */ + +/** + * @} + */ + +/* Exported typedef ----------------------------------------------------------*/ + +/** @defgroup FSMC_LL_Exported_typedef FSMC Low Layer Exported Types + * @{ + */ + +#if defined(FSMC_Bank1) +#define FSMC_NORSRAM_TypeDef FSMC_Bank1_TypeDef +#define FSMC_NORSRAM_EXTENDED_TypeDef FSMC_Bank1E_TypeDef +#endif /* FSMC_Bank1 */ +#if defined(FSMC_Bank2_3) +#define FSMC_NAND_TypeDef FSMC_Bank2_3_TypeDef +#endif /* FSMC_Bank2_3 */ +#if defined(FSMC_Bank4) +#define FSMC_PCCARD_TypeDef FSMC_Bank4_TypeDef +#endif /* FSMC_Bank4 */ + +#if defined(FSMC_Bank1) +#define FSMC_NORSRAM_DEVICE FSMC_Bank1 +#define FSMC_NORSRAM_EXTENDED_DEVICE FSMC_Bank1E +#endif /* FSMC_Bank1 */ +#if defined(FSMC_Bank2_3) +#define FSMC_NAND_DEVICE FSMC_Bank2_3 +#endif /* FSMC_Bank2_3 */ +#if defined(FSMC_Bank4) +#define FSMC_PCCARD_DEVICE FSMC_Bank4 +#endif /* FSMC_Bank4 */ + +#if defined(FSMC_Bank1) +/** + * @brief FSMC NORSRAM Configuration Structure definition + */ +typedef struct +{ + uint32_t NSBank; /*!< Specifies the NORSRAM memory device that will be used. + This parameter can be a value of @ref FSMC_NORSRAM_Bank */ + + uint32_t DataAddressMux; /*!< Specifies whether the address and data values are + multiplexed on the data bus or not. + This parameter can be a value of @ref FSMC_Data_Address_Bus_Multiplexing*/ + + uint32_t MemoryType; /*!< Specifies the type of external memory attached to + the corresponding memory device. + This parameter can be a value of @ref FSMC_Memory_Type */ + + uint32_t MemoryDataWidth; /*!< Specifies the external memory device width. + This parameter can be a value of @ref FSMC_NORSRAM_Data_Width */ + + uint32_t BurstAccessMode; /*!< Enables or disables the burst access mode for Flash memory, + valid only with synchronous burst Flash memories. + This parameter can be a value of @ref FSMC_Burst_Access_Mode */ + + uint32_t WaitSignalPolarity; /*!< Specifies the wait signal polarity, valid only when accessing + the Flash memory in burst mode. + This parameter can be a value of @ref FSMC_Wait_Signal_Polarity */ + + uint32_t WrapMode; /*!< Enables or disables the Wrapped burst access mode for Flash + memory, valid only when accessing Flash memories in burst mode. + This parameter can be a value of @ref FSMC_Wrap_Mode + This mode is available only for the STM32F405/407/4015/417xx devices */ + + uint32_t WaitSignalActive; /*!< Specifies if the wait signal is asserted by the memory one + clock cycle before the wait state or during the wait state, + valid only when accessing memories in burst mode. + This parameter can be a value of @ref FSMC_Wait_Timing */ + + uint32_t WriteOperation; /*!< Enables or disables the write operation in the selected device + by the FSMC. + This parameter can be a value of @ref FSMC_Write_Operation */ + + uint32_t WaitSignal; /*!< Enables or disables the wait state insertion via wait + signal, valid for Flash memory access in burst mode. + This parameter can be a value of @ref FSMC_Wait_Signal */ + + uint32_t ExtendedMode; /*!< Enables or disables the extended mode. + This parameter can be a value of @ref FSMC_Extended_Mode */ + + uint32_t AsynchronousWait; /*!< Enables or disables wait signal during asynchronous transfers, + valid only with asynchronous Flash memories. + This parameter can be a value of @ref FSMC_AsynchronousWait */ + + uint32_t WriteBurst; /*!< Enables or disables the write burst operation. + This parameter can be a value of @ref FSMC_Write_Burst */ + + uint32_t ContinuousClock; /*!< Enables or disables the FSMC clock output to external memory devices. + This parameter is only enabled through the FSMC_BCR1 register, + and don't care through FSMC_BCR2..4 registers. + This parameter can be a value of @ref FSMC_Continous_Clock + This mode is available only for the STM32F412Vx/Zx/Rx devices */ + + uint32_t WriteFifo; /*!< Enables or disables the write FIFO used by the FSMC controller. + This parameter is only enabled through the FSMC_BCR1 register, + and don't care through FSMC_BCR2..4 registers. + This parameter can be a value of @ref FSMC_Write_FIFO + This mode is available only for the STM32F412Vx/Vx devices */ + + uint32_t PageSize; /*!< Specifies the memory page size. + This parameter can be a value of @ref FSMC_Page_Size */ +} FSMC_NORSRAM_InitTypeDef; + +/** + * @brief FSMC NORSRAM Timing parameters structure definition + */ +typedef struct +{ + uint32_t AddressSetupTime; /*!< Defines the number of HCLK cycles to configure + the duration of the address setup time. + This parameter can be a value between Min_Data = 0 and Max_Data = 15. + @note This parameter is not used with synchronous NOR Flash memories. */ + + uint32_t AddressHoldTime; /*!< Defines the number of HCLK cycles to configure + the duration of the address hold time. + This parameter can be a value between Min_Data = 1 and Max_Data = 15. + @note This parameter is not used with synchronous NOR Flash memories. */ + + uint32_t DataSetupTime; /*!< Defines the number of HCLK cycles to configure + the duration of the data setup time. + This parameter can be a value between Min_Data = 1 and Max_Data = 255. + @note This parameter is used for SRAMs, ROMs and asynchronous multiplexed + NOR Flash memories. */ + + uint32_t BusTurnAroundDuration; /*!< Defines the number of HCLK cycles to configure + the duration of the bus turnaround. + This parameter can be a value between Min_Data = 0 and Max_Data = 15. + @note This parameter is only used for multiplexed NOR Flash memories. */ + + uint32_t CLKDivision; /*!< Defines the period of CLK clock output signal, expressed in number of + HCLK cycles. This parameter can be a value between Min_Data = 2 and + Max_Data = 16. + @note This parameter is not used for asynchronous NOR Flash, SRAM or ROM + accesses. */ + + uint32_t DataLatency; /*!< Defines the number of memory clock cycles to issue + to the memory before getting the first data. + The parameter value depends on the memory type as shown below: + - It must be set to 0 in case of a CRAM + - It is don't care in asynchronous NOR, SRAM or ROM accesses + - It may assume a value between Min_Data = 2 and Max_Data = 17 + in NOR Flash memories with synchronous burst mode enable */ + + uint32_t AccessMode; /*!< Specifies the asynchronous access mode. + This parameter can be a value of @ref FSMC_Access_Mode */ +} FSMC_NORSRAM_TimingTypeDef; +#endif /* FSMC_Bank1 */ + +#if defined(FSMC_Bank2_3) +/** + * @brief FSMC NAND Configuration Structure definition + */ +typedef struct +{ + uint32_t NandBank; /*!< Specifies the NAND memory device that will be used. + This parameter can be a value of @ref FSMC_NAND_Bank */ + + uint32_t Waitfeature; /*!< Enables or disables the Wait feature for the NAND Memory device. + This parameter can be any value of @ref FSMC_Wait_feature */ + + uint32_t MemoryDataWidth; /*!< Specifies the external memory device width. + This parameter can be any value of @ref FSMC_NAND_Data_Width */ + + uint32_t EccComputation; /*!< Enables or disables the ECC computation. + This parameter can be any value of @ref FSMC_ECC */ + + uint32_t ECCPageSize; /*!< Defines the page size for the extended ECC. + This parameter can be any value of @ref FSMC_ECC_Page_Size */ + + uint32_t TCLRSetupTime; /*!< Defines the number of HCLK cycles to configure the + delay between CLE low and RE low. + This parameter can be a value between Min_Data = 0 and Max_Data = 255 */ + + uint32_t TARSetupTime; /*!< Defines the number of HCLK cycles to configure the + delay between ALE low and RE low. + This parameter can be a number between Min_Data = 0 and Max_Data = 255 */ +} FSMC_NAND_InitTypeDef; +#endif /* FSMC_Bank2_3 */ + +#if defined(FSMC_Bank2_3) || defined(FSMC_Bank4) +/** + * @brief FSMC NAND Timing parameters structure definition + */ +typedef struct +{ + uint32_t SetupTime; /*!< Defines the number of HCLK cycles to setup address before + the command assertion for NAND-Flash read or write access + to common/Attribute or I/O memory space (depending on + the memory space timing to be configured). + This parameter can be a value between Min_Data = 0 and Max_Data = 254 */ + + uint32_t WaitSetupTime; /*!< Defines the minimum number of HCLK cycles to assert the + command for NAND-Flash read or write access to + common/Attribute or I/O memory space (depending on the + memory space timing to be configured). + This parameter can be a number between Min_Data = 0 and Max_Data = 254 */ + + uint32_t HoldSetupTime; /*!< Defines the number of HCLK clock cycles to hold address + (and data for write access) after the command de-assertion + for NAND-Flash read or write access to common/Attribute + or I/O memory space (depending on the memory space timing + to be configured). + This parameter can be a number between Min_Data = 0 and Max_Data = 254 */ + + uint32_t HiZSetupTime; /*!< Defines the number of HCLK clock cycles during which the + data bus is kept in HiZ after the start of a NAND-Flash + write access to common/Attribute or I/O memory space (depending + on the memory space timing to be configured). + This parameter can be a number between Min_Data = 0 and Max_Data = 254 */ +} FSMC_NAND_PCC_TimingTypeDef; +#endif /* FSMC_Bank2_3 */ + +#if defined(FSMC_Bank4) +/** + * @brief FSMC PCCARD Configuration Structure definition + */ +typedef struct +{ + uint32_t Waitfeature; /*!< Enables or disables the Wait feature for the PCCARD Memory device. + This parameter can be any value of @ref FSMC_Wait_feature */ + + uint32_t TCLRSetupTime; /*!< Defines the number of HCLK cycles to configure the + delay between CLE low and RE low. + This parameter can be a value between Min_Data = 0 and Max_Data = 255 */ + + uint32_t TARSetupTime; /*!< Defines the number of HCLK cycles to configure the + delay between ALE low and RE low. + This parameter can be a number between Min_Data = 0 and Max_Data = 255 */ +} FSMC_PCCARD_InitTypeDef; +#endif /* FSMC_Bank4 */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @addtogroup FSMC_LL_Exported_Constants FSMC Low Layer Exported Constants + * @{ + */ +#if defined(FSMC_Bank1) + +/** @defgroup FSMC_LL_NOR_SRAM_Controller FSMC NOR/SRAM Controller + * @{ + */ + +/** @defgroup FSMC_NORSRAM_Bank FSMC NOR/SRAM Bank + * @{ + */ +#define FSMC_NORSRAM_BANK1 (0x00000000U) +#define FSMC_NORSRAM_BANK2 (0x00000002U) +#define FSMC_NORSRAM_BANK3 (0x00000004U) +#define FSMC_NORSRAM_BANK4 (0x00000006U) +/** + * @} + */ + +/** @defgroup FSMC_Data_Address_Bus_Multiplexing FSMC Data Address Bus Multiplexing + * @{ + */ +#define FSMC_DATA_ADDRESS_MUX_DISABLE (0x00000000U) +#define FSMC_DATA_ADDRESS_MUX_ENABLE (0x00000002U) +/** + * @} + */ + +/** @defgroup FSMC_Memory_Type FSMC Memory Type + * @{ + */ +#define FSMC_MEMORY_TYPE_SRAM (0x00000000U) +#define FSMC_MEMORY_TYPE_PSRAM (0x00000004U) +#define FSMC_MEMORY_TYPE_NOR (0x00000008U) +/** + * @} + */ + +/** @defgroup FSMC_NORSRAM_Data_Width FSMC NORSRAM Data Width + * @{ + */ +#define FSMC_NORSRAM_MEM_BUS_WIDTH_8 (0x00000000U) +#define FSMC_NORSRAM_MEM_BUS_WIDTH_16 (0x00000010U) +#define FSMC_NORSRAM_MEM_BUS_WIDTH_32 (0x00000020U) +/** + * @} + */ + +/** @defgroup FSMC_NORSRAM_Flash_Access FSMC NOR/SRAM Flash Access + * @{ + */ +#define FSMC_NORSRAM_FLASH_ACCESS_ENABLE (0x00000040U) +#define FSMC_NORSRAM_FLASH_ACCESS_DISABLE (0x00000000U) +/** + * @} + */ + +/** @defgroup FSMC_Burst_Access_Mode FSMC Burst Access Mode + * @{ + */ +#define FSMC_BURST_ACCESS_MODE_DISABLE (0x00000000U) +#define FSMC_BURST_ACCESS_MODE_ENABLE (0x00000100U) +/** + * @} + */ + +/** @defgroup FSMC_Wait_Signal_Polarity FSMC Wait Signal Polarity + * @{ + */ +#define FSMC_WAIT_SIGNAL_POLARITY_LOW (0x00000000U) +#define FSMC_WAIT_SIGNAL_POLARITY_HIGH (0x00000200U) +/** + * @} + */ + +/** @defgroup FSMC_Wrap_Mode FSMC Wrap Mode + * @note These values are available only for the STM32F405/415/407/417xx devices. + * @{ + */ +#define FSMC_WRAP_MODE_DISABLE (0x00000000U) +#define FSMC_WRAP_MODE_ENABLE (0x00000400U) +/** + * @} + */ + +/** @defgroup FSMC_Wait_Timing FSMC Wait Timing + * @{ + */ +#define FSMC_WAIT_TIMING_BEFORE_WS (0x00000000U) +#define FSMC_WAIT_TIMING_DURING_WS (0x00000800U) +/** + * @} + */ + +/** @defgroup FSMC_Write_Operation FSMC Write Operation + * @{ + */ +#define FSMC_WRITE_OPERATION_DISABLE (0x00000000U) +#define FSMC_WRITE_OPERATION_ENABLE (0x00001000U) +/** + * @} + */ + +/** @defgroup FSMC_Wait_Signal FSMC Wait Signal + * @{ + */ +#define FSMC_WAIT_SIGNAL_DISABLE (0x00000000U) +#define FSMC_WAIT_SIGNAL_ENABLE (0x00002000U) +/** + * @} + */ + +/** @defgroup FSMC_Extended_Mode FSMC Extended Mode + * @{ + */ +#define FSMC_EXTENDED_MODE_DISABLE (0x00000000U) +#define FSMC_EXTENDED_MODE_ENABLE (0x00004000U) +/** + * @} + */ + +/** @defgroup FSMC_AsynchronousWait FSMC Asynchronous Wait + * @{ + */ +#define FSMC_ASYNCHRONOUS_WAIT_DISABLE (0x00000000U) +#define FSMC_ASYNCHRONOUS_WAIT_ENABLE (0x00008000U) +/** + * @} + */ + +/** @defgroup FSMC_Page_Size FSMC Page Size + * @{ + */ +#define FSMC_PAGE_SIZE_NONE (0x00000000U) +#define FSMC_PAGE_SIZE_128 FSMC_BCR1_CPSIZE_0 +#define FSMC_PAGE_SIZE_256 FSMC_BCR1_CPSIZE_1 +#define FSMC_PAGE_SIZE_512 (FSMC_BCR1_CPSIZE_0\ + | FSMC_BCR1_CPSIZE_1) +#define FSMC_PAGE_SIZE_1024 FSMC_BCR1_CPSIZE_2 +/** + * @} + */ + +/** @defgroup FSMC_Write_Burst FSMC Write Burst + * @{ + */ +#define FSMC_WRITE_BURST_DISABLE (0x00000000U) +#define FSMC_WRITE_BURST_ENABLE (0x00080000U) +/** + * @} + */ + +/** @defgroup FSMC_Continous_Clock FSMC Continuous Clock + * @note These values are available only for the STM32F412Vx/Zx/Rx devices. + * @{ + */ +#define FSMC_CONTINUOUS_CLOCK_SYNC_ONLY (0x00000000U) +#define FSMC_CONTINUOUS_CLOCK_SYNC_ASYNC (0x00100000U) +/** + * @} + */ + +#if defined(FSMC_BCR1_WFDIS) +/** @defgroup FSMC_Write_FIFO FSMC Write FIFO + * @note These values are available only for the STM32F412Vx/Zx/Rx devices. + * @{ + */ +#define FSMC_WRITE_FIFO_DISABLE FSMC_BCR1_WFDIS +#define FSMC_WRITE_FIFO_ENABLE (0x00000000U) +#endif /* FSMC_BCR1_WFDIS */ +/** + * @} + */ + +/** @defgroup FSMC_Access_Mode FSMC Access Mode + * @{ + */ +#define FSMC_ACCESS_MODE_A (0x00000000U) +#define FSMC_ACCESS_MODE_B (0x10000000U) +#define FSMC_ACCESS_MODE_C (0x20000000U) +#define FSMC_ACCESS_MODE_D (0x30000000U) +/** + * @} + */ + +/** + * @} + */ +#endif /* FSMC_Bank1 */ + +#if defined(FSMC_Bank2_3) || defined(FSMC_Bank4) + +/** @defgroup FSMC_LL_NAND_Controller FSMC NAND Controller + * @{ + */ +/** @defgroup FSMC_NAND_Bank FSMC NAND Bank + * @{ + */ +#if defined(FSMC_Bank2_3) +#define FSMC_NAND_BANK2 (0x00000010U) +#endif /* FSMC_Bank2_3 */ +#define FSMC_NAND_BANK3 (0x00000100U) +/** + * @} + */ + +/** @defgroup FSMC_Wait_feature FSMC Wait feature + * @{ + */ +#define FSMC_NAND_PCC_WAIT_FEATURE_DISABLE (0x00000000U) +#define FSMC_NAND_PCC_WAIT_FEATURE_ENABLE (0x00000002U) +/** + * @} + */ + +/** @defgroup FSMC_PCR_Memory_Type FSMC PCR Memory Type + * @{ + */ +#if defined(FSMC_Bank4) +#define FSMC_PCR_MEMORY_TYPE_PCCARD (0x00000000U) +#endif /* FSMC_Bank4 */ +#define FSMC_PCR_MEMORY_TYPE_NAND (0x00000008U) +/** + * @} + */ + +/** @defgroup FSMC_NAND_Data_Width FSMC NAND Data Width + * @{ + */ +#define FSMC_NAND_PCC_MEM_BUS_WIDTH_8 (0x00000000U) +#define FSMC_NAND_PCC_MEM_BUS_WIDTH_16 (0x00000010U) +/** + * @} + */ + +/** @defgroup FSMC_ECC FSMC ECC + * @{ + */ +#define FSMC_NAND_ECC_DISABLE (0x00000000U) +#define FSMC_NAND_ECC_ENABLE (0x00000040U) +/** + * @} + */ + +/** @defgroup FSMC_ECC_Page_Size FSMC ECC Page Size + * @{ + */ +#define FSMC_NAND_ECC_PAGE_SIZE_256BYTE (0x00000000U) +#define FSMC_NAND_ECC_PAGE_SIZE_512BYTE (0x00020000U) +#define FSMC_NAND_ECC_PAGE_SIZE_1024BYTE (0x00040000U) +#define FSMC_NAND_ECC_PAGE_SIZE_2048BYTE (0x00060000U) +#define FSMC_NAND_ECC_PAGE_SIZE_4096BYTE (0x00080000U) +#define FSMC_NAND_ECC_PAGE_SIZE_8192BYTE (0x000A0000U) +/** + * @} + */ + +/** + * @} + */ +#endif /* FSMC_Bank2_3 || FSMC_Bank4 */ + + +/** @defgroup FSMC_LL_Interrupt_definition FSMC Low Layer Interrupt definition + * @{ + */ +#if defined(FSMC_Bank2_3) || defined(FSMC_Bank4) +#define FSMC_IT_RISING_EDGE (0x00000008U) +#define FSMC_IT_LEVEL (0x00000010U) +#define FSMC_IT_FALLING_EDGE (0x00000020U) +#endif /* FSMC_Bank2_3 || FSMC_Bank4 */ +/** + * @} + */ + +/** @defgroup FSMC_LL_Flag_definition FSMC Low Layer Flag definition + * @{ + */ +#if defined(FSMC_Bank2_3) || defined(FSMC_Bank4) +#define FSMC_FLAG_RISING_EDGE (0x00000001U) +#define FSMC_FLAG_LEVEL (0x00000002U) +#define FSMC_FLAG_FALLING_EDGE (0x00000004U) +#define FSMC_FLAG_FEMPT (0x00000040U) +#endif /* FSMC_Bank2_3 || FSMC_Bank4 */ +/** + * @} + */ + +/** @defgroup FSMC_LL_Alias_definition FSMC Alias definition + * @{ + */ +#define FMC_WRITE_OPERATION_DISABLE FSMC_WRITE_OPERATION_DISABLE +#define FMC_WRITE_OPERATION_ENABLE FSMC_WRITE_OPERATION_ENABLE + +#define FMC_NORSRAM_MEM_BUS_WIDTH_8 FSMC_NORSRAM_MEM_BUS_WIDTH_8 +#define FMC_NORSRAM_MEM_BUS_WIDTH_16 FSMC_NORSRAM_MEM_BUS_WIDTH_16 +#define FMC_NORSRAM_MEM_BUS_WIDTH_32 FSMC_NORSRAM_MEM_BUS_WIDTH_32 + +#define FMC_NORSRAM_TypeDef FSMC_NORSRAM_TypeDef +#define FMC_NORSRAM_EXTENDED_TypeDef FSMC_NORSRAM_EXTENDED_TypeDef +#define FMC_NORSRAM_InitTypeDef FSMC_NORSRAM_InitTypeDef +#define FMC_NORSRAM_TimingTypeDef FSMC_NORSRAM_TimingTypeDef + +#define FMC_NORSRAM_Init FSMC_NORSRAM_Init +#define FMC_NORSRAM_Timing_Init FSMC_NORSRAM_Timing_Init +#define FMC_NORSRAM_Extended_Timing_Init FSMC_NORSRAM_Extended_Timing_Init +#define FMC_NORSRAM_DeInit FSMC_NORSRAM_DeInit +#define FMC_NORSRAM_WriteOperation_Enable FSMC_NORSRAM_WriteOperation_Enable +#define FMC_NORSRAM_WriteOperation_Disable FSMC_NORSRAM_WriteOperation_Disable + +#define __FMC_NORSRAM_ENABLE __FSMC_NORSRAM_ENABLE +#define __FMC_NORSRAM_DISABLE __FSMC_NORSRAM_DISABLE + +#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) +#define FMC_NAND_InitTypeDef FSMC_NAND_InitTypeDef +#define FMC_PCCARD_InitTypeDef FSMC_PCCARD_InitTypeDef +#define FMC_NAND_PCC_TimingTypeDef FSMC_NAND_PCC_TimingTypeDef + +#define FMC_NAND_Init FSMC_NAND_Init +#define FMC_NAND_CommonSpace_Timing_Init FSMC_NAND_CommonSpace_Timing_Init +#define FMC_NAND_AttributeSpace_Timing_Init FSMC_NAND_AttributeSpace_Timing_Init +#define FMC_NAND_DeInit FSMC_NAND_DeInit +#define FMC_NAND_ECC_Enable FSMC_NAND_ECC_Enable +#define FMC_NAND_ECC_Disable FSMC_NAND_ECC_Disable +#define FMC_NAND_GetECC FSMC_NAND_GetECC +#define FMC_PCCARD_Init FSMC_PCCARD_Init +#define FMC_PCCARD_CommonSpace_Timing_Init FSMC_PCCARD_CommonSpace_Timing_Init +#define FMC_PCCARD_AttributeSpace_Timing_Init FSMC_PCCARD_AttributeSpace_Timing_Init +#define FMC_PCCARD_IOSpace_Timing_Init FSMC_PCCARD_IOSpace_Timing_Init +#define FMC_PCCARD_DeInit FSMC_PCCARD_DeInit + +#define __FMC_NAND_ENABLE __FSMC_NAND_ENABLE +#define __FMC_NAND_DISABLE __FSMC_NAND_DISABLE +#define __FMC_PCCARD_ENABLE __FSMC_PCCARD_ENABLE +#define __FMC_PCCARD_DISABLE __FSMC_PCCARD_DISABLE +#define __FMC_NAND_ENABLE_IT __FSMC_NAND_ENABLE_IT +#define __FMC_NAND_DISABLE_IT __FSMC_NAND_DISABLE_IT +#define __FMC_NAND_GET_FLAG __FSMC_NAND_GET_FLAG +#define __FMC_NAND_CLEAR_FLAG __FSMC_NAND_CLEAR_FLAG +#define __FMC_PCCARD_ENABLE_IT __FSMC_PCCARD_ENABLE_IT +#define __FMC_PCCARD_DISABLE_IT __FSMC_PCCARD_DISABLE_IT +#define __FMC_PCCARD_GET_FLAG __FSMC_PCCARD_GET_FLAG +#define __FMC_PCCARD_CLEAR_FLAG __FSMC_PCCARD_CLEAR_FLAG +#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */ + +#define FMC_NORSRAM_TypeDef FSMC_NORSRAM_TypeDef +#define FMC_NORSRAM_EXTENDED_TypeDef FSMC_NORSRAM_EXTENDED_TypeDef +#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) +#define FMC_NAND_TypeDef FSMC_NAND_TypeDef +#define FMC_PCCARD_TypeDef FSMC_PCCARD_TypeDef +#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */ + +#define FMC_NORSRAM_DEVICE FSMC_NORSRAM_DEVICE +#define FMC_NORSRAM_EXTENDED_DEVICE FSMC_NORSRAM_EXTENDED_DEVICE +#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) +#define FMC_NAND_DEVICE FSMC_NAND_DEVICE +#define FMC_PCCARD_DEVICE FSMC_PCCARD_DEVICE + +#define FMC_NAND_BANK2 FSMC_NAND_BANK2 +#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */ + +#define FMC_NORSRAM_BANK1 FSMC_NORSRAM_BANK1 +#define FMC_NORSRAM_BANK2 FSMC_NORSRAM_BANK2 +#define FMC_NORSRAM_BANK3 FSMC_NORSRAM_BANK3 + +#define FMC_IT_RISING_EDGE FSMC_IT_RISING_EDGE +#define FMC_IT_LEVEL FSMC_IT_LEVEL +#define FMC_IT_FALLING_EDGE FSMC_IT_FALLING_EDGE +#define FMC_IT_REFRESH_ERROR FSMC_IT_REFRESH_ERROR + +#define FMC_FLAG_RISING_EDGE FSMC_FLAG_RISING_EDGE +#define FMC_FLAG_LEVEL FSMC_FLAG_LEVEL +#define FMC_FLAG_FALLING_EDGE FSMC_FLAG_FALLING_EDGE +#define FMC_FLAG_FEMPT FSMC_FLAG_FEMPT +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/** @defgroup FSMC_LL_Private_Macros FSMC_LL Private Macros + * @{ + */ +#if defined(FSMC_Bank1) +/** @defgroup FSMC_LL_NOR_Macros FSMC NOR/SRAM Macros + * @brief macros to handle NOR device enable/disable and read/write operations + * @{ + */ + +/** + * @brief Enable the NORSRAM device access. + * @param __INSTANCE__ FSMC_NORSRAM Instance + * @param __BANK__ FSMC_NORSRAM Bank + * @retval None + */ +#define __FSMC_NORSRAM_ENABLE(__INSTANCE__, __BANK__) ((__INSTANCE__)->BTCR[(__BANK__)]\ + |= FSMC_BCR1_MBKEN) + +/** + * @brief Disable the NORSRAM device access. + * @param __INSTANCE__ FSMC_NORSRAM Instance + * @param __BANK__ FSMC_NORSRAM Bank + * @retval None + */ +#define __FSMC_NORSRAM_DISABLE(__INSTANCE__, __BANK__) ((__INSTANCE__)->BTCR[(__BANK__)]\ + &= ~FSMC_BCR1_MBKEN) + +/** + * @} + */ +#endif /* FSMC_Bank1 */ + +#if defined(FSMC_Bank2_3) +/** @defgroup FSMC_LL_NAND_Macros FSMC NAND Macros + * @brief macros to handle NAND device enable/disable + * @{ + */ + +/** + * @brief Enable the NAND device access. + * @param __INSTANCE__ FSMC_NAND Instance + * @param __BANK__ FSMC_NAND Bank + * @retval None + */ +#define __FSMC_NAND_ENABLE(__INSTANCE__, __BANK__) (((__BANK__) == FSMC_NAND_BANK2) ? \ + ((__INSTANCE__)->PCR2 |= FSMC_PCR2_PBKEN) : \ + ((__INSTANCE__)->PCR3 |= FSMC_PCR3_PBKEN)) + +/** + * @brief Disable the NAND device access. + * @param __INSTANCE__ FSMC_NAND Instance + * @param __BANK__ FSMC_NAND Bank + * @retval None + */ +#define __FSMC_NAND_DISABLE(__INSTANCE__, __BANK__) (((__BANK__) == FSMC_NAND_BANK2) ? \ + CLEAR_BIT((__INSTANCE__)->PCR2, FSMC_PCR2_PBKEN) : \ + CLEAR_BIT((__INSTANCE__)->PCR3, FSMC_PCR3_PBKEN)) + +/** + * @} + */ +#endif /* FSMC_Bank2_3 */ + +#if defined(FSMC_Bank4) +/** @defgroup FSMC_LL_PCCARD_Macros FMC PCCARD Macros + * @brief macros to handle PCCARD read/write operations + * @{ + */ +/** + * @brief Enable the PCCARD device access. + * @param __INSTANCE__ FSMC_PCCARD Instance + * @retval None + */ +#define __FSMC_PCCARD_ENABLE(__INSTANCE__) ((__INSTANCE__)->PCR4 |= FSMC_PCR4_PBKEN) + +/** + * @brief Disable the PCCARD device access. + * @param __INSTANCE__ FSMC_PCCARD Instance + * @retval None + */ +#define __FSMC_PCCARD_DISABLE(__INSTANCE__) ((__INSTANCE__)->PCR4 &= ~FSMC_PCR4_PBKEN) +/** + * @} + */ + +#endif /* FSMC_Bank4 */ +#if defined(FSMC_Bank2_3) +/** @defgroup FSMC_LL_NAND_Interrupt FSMC NAND Interrupt + * @brief macros to handle NAND interrupts + * @{ + */ + +/** + * @brief Enable the NAND device interrupt. + * @param __INSTANCE__ FSMC_NAND instance + * @param __BANK__ FSMC_NAND Bank + * @param __INTERRUPT__ FSMC_NAND interrupt + * This parameter can be any combination of the following values: + * @arg FSMC_IT_RISING_EDGE: Interrupt rising edge. + * @arg FSMC_IT_LEVEL: Interrupt level. + * @arg FSMC_IT_FALLING_EDGE: Interrupt falling edge. + * @retval None + */ +#define __FSMC_NAND_ENABLE_IT(__INSTANCE__, __BANK__, __INTERRUPT__) (((__BANK__) == FSMC_NAND_BANK2) ? \ + ((__INSTANCE__)->SR2 |= (__INTERRUPT__)) : \ + ((__INSTANCE__)->SR3 |= (__INTERRUPT__))) + +/** + * @brief Disable the NAND device interrupt. + * @param __INSTANCE__ FSMC_NAND Instance + * @param __BANK__ FSMC_NAND Bank + * @param __INTERRUPT__ FSMC_NAND interrupt + * This parameter can be any combination of the following values: + * @arg FSMC_IT_RISING_EDGE: Interrupt rising edge. + * @arg FSMC_IT_LEVEL: Interrupt level. + * @arg FSMC_IT_FALLING_EDGE: Interrupt falling edge. + * @retval None + */ +#define __FSMC_NAND_DISABLE_IT(__INSTANCE__, __BANK__, __INTERRUPT__) (((__BANK__) == FSMC_NAND_BANK2) ? \ + ((__INSTANCE__)->SR2 &= ~(__INTERRUPT__)) : \ + ((__INSTANCE__)->SR3 &= ~(__INTERRUPT__))) + +/** + * @brief Get flag status of the NAND device. + * @param __INSTANCE__ FSMC_NAND Instance + * @param __BANK__ FSMC_NAND Bank + * @param __FLAG__ FSMC_NAND flag + * This parameter can be any combination of the following values: + * @arg FSMC_FLAG_RISING_EDGE: Interrupt rising edge flag. + * @arg FSMC_FLAG_LEVEL: Interrupt level edge flag. + * @arg FSMC_FLAG_FALLING_EDGE: Interrupt falling edge flag. + * @arg FSMC_FLAG_FEMPT: FIFO empty flag. + * @retval The state of FLAG (SET or RESET). + */ +#define __FSMC_NAND_GET_FLAG(__INSTANCE__, __BANK__, __FLAG__) (((__BANK__) == FSMC_NAND_BANK2) ? \ + (((__INSTANCE__)->SR2 &(__FLAG__)) == (__FLAG__)) : \ + (((__INSTANCE__)->SR3 &(__FLAG__)) == (__FLAG__))) + +/** + * @brief Clear flag status of the NAND device. + * @param __INSTANCE__ FSMC_NAND Instance + * @param __BANK__ FSMC_NAND Bank + * @param __FLAG__ FSMC_NAND flag + * This parameter can be any combination of the following values: + * @arg FSMC_FLAG_RISING_EDGE: Interrupt rising edge flag. + * @arg FSMC_FLAG_LEVEL: Interrupt level edge flag. + * @arg FSMC_FLAG_FALLING_EDGE: Interrupt falling edge flag. + * @arg FSMC_FLAG_FEMPT: FIFO empty flag. + * @retval None + */ +#define __FSMC_NAND_CLEAR_FLAG(__INSTANCE__, __BANK__, __FLAG__) (((__BANK__) == FSMC_NAND_BANK2) ? \ + ((__INSTANCE__)->SR2 &= ~(__FLAG__)) : \ + ((__INSTANCE__)->SR3 &= ~(__FLAG__))) + +/** + * @} + */ +#endif /* FSMC_Bank2_3 */ + +#if defined(FSMC_Bank4) +/** @defgroup FSMC_LL_PCCARD_Interrupt FSMC PCCARD Interrupt + * @brief macros to handle PCCARD interrupts + * @{ + */ + +/** + * @brief Enable the PCCARD device interrupt. + * @param __INSTANCE__ FSMC_PCCARD instance + * @param __INTERRUPT__ FSMC_PCCARD interrupt + * This parameter can be any combination of the following values: + * @arg FSMC_IT_RISING_EDGE: Interrupt rising edge. + * @arg FSMC_IT_LEVEL: Interrupt level. + * @arg FSMC_IT_FALLING_EDGE: Interrupt falling edge. + * @retval None + */ +#define __FSMC_PCCARD_ENABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->SR4 |= (__INTERRUPT__)) + +/** + * @brief Disable the PCCARD device interrupt. + * @param __INSTANCE__ FSMC_PCCARD instance + * @param __INTERRUPT__ FSMC_PCCARD interrupt + * This parameter can be any combination of the following values: + * @arg FSMC_IT_RISING_EDGE: Interrupt rising edge. + * @arg FSMC_IT_LEVEL: Interrupt level. + * @arg FSMC_IT_FALLING_EDGE: Interrupt falling edge. + * @retval None + */ +#define __FSMC_PCCARD_DISABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->SR4 &= ~(__INTERRUPT__)) + +/** + * @brief Get flag status of the PCCARD device. + * @param __INSTANCE__ FSMC_PCCARD instance + * @param __FLAG__ FSMC_PCCARD flag + * This parameter can be any combination of the following values: + * @arg FSMC_FLAG_RISING_EDGE: Interrupt rising edge flag. + * @arg FSMC_FLAG_LEVEL: Interrupt level edge flag. + * @arg FSMC_FLAG_FALLING_EDGE: Interrupt falling edge flag. + * @arg FSMC_FLAG_FEMPT: FIFO empty flag. + * @retval The state of FLAG (SET or RESET). + */ +#define __FSMC_PCCARD_GET_FLAG(__INSTANCE__, __FLAG__) (((__INSTANCE__)->SR4 &(__FLAG__)) == (__FLAG__)) + +/** + * @brief Clear flag status of the PCCARD device. + * @param __INSTANCE__ FSMC_PCCARD instance + * @param __FLAG__ FSMC_PCCARD flag + * This parameter can be any combination of the following values: + * @arg FSMC_FLAG_RISING_EDGE: Interrupt rising edge flag. + * @arg FSMC_FLAG_LEVEL: Interrupt level edge flag. + * @arg FSMC_FLAG_FALLING_EDGE: Interrupt falling edge flag. + * @arg FSMC_FLAG_FEMPT: FIFO empty flag. + * @retval None + */ +#define __FSMC_PCCARD_CLEAR_FLAG(__INSTANCE__, __FLAG__) ((__INSTANCE__)->SR4 &= ~(__FLAG__)) + +/** + * @} + */ +#endif /* FSMC_Bank4 */ + +/** + * @} + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @defgroup FSMC_LL_Private_Functions FSMC LL Private Functions + * @{ + */ + +#if defined(FSMC_Bank1) +/** @defgroup FSMC_LL_NORSRAM NOR SRAM + * @{ + */ +/** @defgroup FSMC_LL_NORSRAM_Private_Functions_Group1 NOR SRAM Initialization/de-initialization functions + * @{ + */ +HAL_StatusTypeDef FSMC_NORSRAM_Init(FSMC_NORSRAM_TypeDef *Device, + const FSMC_NORSRAM_InitTypeDef *Init); +HAL_StatusTypeDef FSMC_NORSRAM_Timing_Init(FSMC_NORSRAM_TypeDef *Device, + const FSMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank); +HAL_StatusTypeDef FSMC_NORSRAM_Extended_Timing_Init(FSMC_NORSRAM_EXTENDED_TypeDef *Device, + const FSMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank, + uint32_t ExtendedMode); +HAL_StatusTypeDef FSMC_NORSRAM_DeInit(FSMC_NORSRAM_TypeDef *Device, + FSMC_NORSRAM_EXTENDED_TypeDef *ExDevice, uint32_t Bank); +/** + * @} + */ + +/** @defgroup FSMC_LL_NORSRAM_Private_Functions_Group2 NOR SRAM Control functions + * @{ + */ +HAL_StatusTypeDef FSMC_NORSRAM_WriteOperation_Enable(FSMC_NORSRAM_TypeDef *Device, uint32_t Bank); +HAL_StatusTypeDef FSMC_NORSRAM_WriteOperation_Disable(FSMC_NORSRAM_TypeDef *Device, uint32_t Bank); +/** + * @} + */ +/** + * @} + */ +#endif /* FSMC_Bank1 */ + +#if defined(FSMC_Bank2_3) +/** @defgroup FSMC_LL_NAND NAND + * @{ + */ +/** @defgroup FSMC_LL_NAND_Private_Functions_Group1 NAND Initialization/de-initialization functions + * @{ + */ +HAL_StatusTypeDef FSMC_NAND_Init(FSMC_NAND_TypeDef *Device, const FSMC_NAND_InitTypeDef *Init); +HAL_StatusTypeDef FSMC_NAND_CommonSpace_Timing_Init(FSMC_NAND_TypeDef *Device, + const FSMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank); +HAL_StatusTypeDef FSMC_NAND_AttributeSpace_Timing_Init(FSMC_NAND_TypeDef *Device, + const FSMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank); +HAL_StatusTypeDef FSMC_NAND_DeInit(FSMC_NAND_TypeDef *Device, uint32_t Bank); +/** + * @} + */ + +/** @defgroup FSMC_LL_NAND_Private_Functions_Group2 NAND Control functions + * @{ + */ +HAL_StatusTypeDef FSMC_NAND_ECC_Enable(FSMC_NAND_TypeDef *Device, uint32_t Bank); +HAL_StatusTypeDef FSMC_NAND_ECC_Disable(FSMC_NAND_TypeDef *Device, uint32_t Bank); +HAL_StatusTypeDef FSMC_NAND_GetECC(const FSMC_NAND_TypeDef *Device, uint32_t *ECCval, uint32_t Bank, + uint32_t Timeout); +/** + * @} + */ +/** + * @} + */ +#endif /* FSMC_Bank2_3 */ + +#if defined(FSMC_Bank4) +/** @defgroup FSMC_LL_PCCARD PCCARD + * @{ + */ +/** @defgroup FSMC_LL_PCCARD_Private_Functions_Group1 PCCARD Initialization/de-initialization functions + * @{ + */ +HAL_StatusTypeDef FSMC_PCCARD_Init(FSMC_PCCARD_TypeDef *Device, const FSMC_PCCARD_InitTypeDef *Init); +HAL_StatusTypeDef FSMC_PCCARD_CommonSpace_Timing_Init(FSMC_PCCARD_TypeDef *Device, + const FSMC_NAND_PCC_TimingTypeDef *Timing); +HAL_StatusTypeDef FSMC_PCCARD_AttributeSpace_Timing_Init(FSMC_PCCARD_TypeDef *Device, + const FSMC_NAND_PCC_TimingTypeDef *Timing); +HAL_StatusTypeDef FSMC_PCCARD_IOSpace_Timing_Init(FSMC_PCCARD_TypeDef *Device, + const FSMC_NAND_PCC_TimingTypeDef *Timing); +HAL_StatusTypeDef FSMC_PCCARD_DeInit(FSMC_PCCARD_TypeDef *Device); +/** + * @} + */ +/** + * @} + */ +#endif /* FSMC_Bank4 */ + + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32F4xx_LL_FSMC_H */ diff --git a/cubemx/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_usart.h b/cubemx/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_usart.h new file mode 100644 index 0000000..ed83b6c --- /dev/null +++ b/cubemx/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_usart.h @@ -0,0 +1,2521 @@ +/** + ****************************************************************************** + * @file stm32f4xx_ll_usart.h + * @author MCD Application Team + * @brief Header file of USART LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_LL_USART_H +#define __STM32F4xx_LL_USART_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx.h" + +/** @addtogroup STM32F4xx_LL_Driver + * @{ + */ + +#if defined (USART1) || defined (USART2) || defined (USART3) || defined (USART6) || defined (UART4) || defined (UART5) || defined (UART7) || defined (UART8) || defined (UART9) || defined (UART10) + +/** @defgroup USART_LL USART + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup USART_LL_Private_Constants USART Private Constants + * @{ + */ + +/* Defines used for the bit position in the register and perform offsets*/ +#define USART_POSITION_GTPR_GT USART_GTPR_GT_Pos +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup USART_LL_Private_Macros USART Private Macros + * @{ + */ +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup USART_LL_ES_INIT USART Exported Init structures + * @{ + */ + +/** + * @brief LL USART Init Structure definition + */ +typedef struct +{ + uint32_t BaudRate; /*!< This field defines expected Usart communication baud rate. + + This feature can be modified afterwards using unitary function @ref LL_USART_SetBaudRate().*/ + + uint32_t DataWidth; /*!< Specifies the number of data bits transmitted or received in a frame. + This parameter can be a value of @ref USART_LL_EC_DATAWIDTH. + + This feature can be modified afterwards using unitary function @ref LL_USART_SetDataWidth().*/ + + uint32_t StopBits; /*!< Specifies the number of stop bits transmitted. + This parameter can be a value of @ref USART_LL_EC_STOPBITS. + + This feature can be modified afterwards using unitary function @ref LL_USART_SetStopBitsLength().*/ + + uint32_t Parity; /*!< Specifies the parity mode. + This parameter can be a value of @ref USART_LL_EC_PARITY. + + This feature can be modified afterwards using unitary function @ref LL_USART_SetParity().*/ + + uint32_t TransferDirection; /*!< Specifies whether the Receive and/or Transmit mode is enabled or disabled. + This parameter can be a value of @ref USART_LL_EC_DIRECTION. + + This feature can be modified afterwards using unitary function @ref LL_USART_SetTransferDirection().*/ + + uint32_t HardwareFlowControl; /*!< Specifies whether the hardware flow control mode is enabled or disabled. + This parameter can be a value of @ref USART_LL_EC_HWCONTROL. + + This feature can be modified afterwards using unitary function @ref LL_USART_SetHWFlowCtrl().*/ + + uint32_t OverSampling; /*!< Specifies whether USART oversampling mode is 16 or 8. + This parameter can be a value of @ref USART_LL_EC_OVERSAMPLING. + + This feature can be modified afterwards using unitary function @ref LL_USART_SetOverSampling().*/ + +} LL_USART_InitTypeDef; + +/** + * @brief LL USART Clock Init Structure definition + */ +typedef struct +{ + uint32_t ClockOutput; /*!< Specifies whether the USART clock is enabled or disabled. + This parameter can be a value of @ref USART_LL_EC_CLOCK. + + USART HW configuration can be modified afterwards using unitary functions + @ref LL_USART_EnableSCLKOutput() or @ref LL_USART_DisableSCLKOutput(). + For more details, refer to description of this function. */ + + uint32_t ClockPolarity; /*!< Specifies the steady state of the serial clock. + This parameter can be a value of @ref USART_LL_EC_POLARITY. + + USART HW configuration can be modified afterwards using unitary functions @ref LL_USART_SetClockPolarity(). + For more details, refer to description of this function. */ + + uint32_t ClockPhase; /*!< Specifies the clock transition on which the bit capture is made. + This parameter can be a value of @ref USART_LL_EC_PHASE. + + USART HW configuration can be modified afterwards using unitary functions @ref LL_USART_SetClockPhase(). + For more details, refer to description of this function. */ + + uint32_t LastBitClockPulse; /*!< Specifies whether the clock pulse corresponding to the last transmitted + data bit (MSB) has to be output on the SCLK pin in synchronous mode. + This parameter can be a value of @ref USART_LL_EC_LASTCLKPULSE. + + USART HW configuration can be modified afterwards using unitary functions @ref LL_USART_SetLastClkPulseOutput(). + For more details, refer to description of this function. */ + +} LL_USART_ClockInitTypeDef; + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup USART_LL_Exported_Constants USART Exported Constants + * @{ + */ + +/** @defgroup USART_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_USART_ReadReg function + * @{ + */ +#define LL_USART_SR_PE USART_SR_PE /*!< Parity error flag */ +#define LL_USART_SR_FE USART_SR_FE /*!< Framing error flag */ +#define LL_USART_SR_NE USART_SR_NE /*!< Noise detected flag */ +#define LL_USART_SR_ORE USART_SR_ORE /*!< Overrun error flag */ +#define LL_USART_SR_IDLE USART_SR_IDLE /*!< Idle line detected flag */ +#define LL_USART_SR_RXNE USART_SR_RXNE /*!< Read data register not empty flag */ +#define LL_USART_SR_TC USART_SR_TC /*!< Transmission complete flag */ +#define LL_USART_SR_TXE USART_SR_TXE /*!< Transmit data register empty flag */ +#define LL_USART_SR_LBD USART_SR_LBD /*!< LIN break detection flag */ +#define LL_USART_SR_CTS USART_SR_CTS /*!< CTS flag */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_USART_ReadReg and LL_USART_WriteReg functions + * @{ + */ +#define LL_USART_CR1_IDLEIE USART_CR1_IDLEIE /*!< IDLE interrupt enable */ +#define LL_USART_CR1_RXNEIE USART_CR1_RXNEIE /*!< Read data register not empty interrupt enable */ +#define LL_USART_CR1_TCIE USART_CR1_TCIE /*!< Transmission complete interrupt enable */ +#define LL_USART_CR1_TXEIE USART_CR1_TXEIE /*!< Transmit data register empty interrupt enable */ +#define LL_USART_CR1_PEIE USART_CR1_PEIE /*!< Parity error */ +#define LL_USART_CR2_LBDIE USART_CR2_LBDIE /*!< LIN break detection interrupt enable */ +#define LL_USART_CR3_EIE USART_CR3_EIE /*!< Error interrupt enable */ +#define LL_USART_CR3_CTSIE USART_CR3_CTSIE /*!< CTS interrupt enable */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_DIRECTION Communication Direction + * @{ + */ +#define LL_USART_DIRECTION_NONE 0x00000000U /*!< Transmitter and Receiver are disabled */ +#define LL_USART_DIRECTION_RX USART_CR1_RE /*!< Transmitter is disabled and Receiver is enabled */ +#define LL_USART_DIRECTION_TX USART_CR1_TE /*!< Transmitter is enabled and Receiver is disabled */ +#define LL_USART_DIRECTION_TX_RX (USART_CR1_TE |USART_CR1_RE) /*!< Transmitter and Receiver are enabled */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_PARITY Parity Control + * @{ + */ +#define LL_USART_PARITY_NONE 0x00000000U /*!< Parity control disabled */ +#define LL_USART_PARITY_EVEN USART_CR1_PCE /*!< Parity control enabled and Even Parity is selected */ +#define LL_USART_PARITY_ODD (USART_CR1_PCE | USART_CR1_PS) /*!< Parity control enabled and Odd Parity is selected */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_WAKEUP Wakeup + * @{ + */ +#define LL_USART_WAKEUP_IDLELINE 0x00000000U /*!< USART wake up from Mute mode on Idle Line */ +#define LL_USART_WAKEUP_ADDRESSMARK USART_CR1_WAKE /*!< USART wake up from Mute mode on Address Mark */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_DATAWIDTH Datawidth + * @{ + */ +#define LL_USART_DATAWIDTH_8B 0x00000000U /*!< 8 bits word length : Start bit, 8 data bits, n stop bits */ +#define LL_USART_DATAWIDTH_9B USART_CR1_M /*!< 9 bits word length : Start bit, 9 data bits, n stop bits */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_OVERSAMPLING Oversampling + * @{ + */ +#define LL_USART_OVERSAMPLING_16 0x00000000U /*!< Oversampling by 16 */ +#define LL_USART_OVERSAMPLING_8 USART_CR1_OVER8 /*!< Oversampling by 8 */ +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup USART_LL_EC_CLOCK Clock Signal + * @{ + */ + +#define LL_USART_CLOCK_DISABLE 0x00000000U /*!< Clock signal not provided */ +#define LL_USART_CLOCK_ENABLE USART_CR2_CLKEN /*!< Clock signal provided */ +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/** @defgroup USART_LL_EC_LASTCLKPULSE Last Clock Pulse + * @{ + */ +#define LL_USART_LASTCLKPULSE_NO_OUTPUT 0x00000000U /*!< The clock pulse of the last data bit is not output to the SCLK pin */ +#define LL_USART_LASTCLKPULSE_OUTPUT USART_CR2_LBCL /*!< The clock pulse of the last data bit is output to the SCLK pin */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_PHASE Clock Phase + * @{ + */ +#define LL_USART_PHASE_1EDGE 0x00000000U /*!< The first clock transition is the first data capture edge */ +#define LL_USART_PHASE_2EDGE USART_CR2_CPHA /*!< The second clock transition is the first data capture edge */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_POLARITY Clock Polarity + * @{ + */ +#define LL_USART_POLARITY_LOW 0x00000000U /*!< Steady low value on SCLK pin outside transmission window*/ +#define LL_USART_POLARITY_HIGH USART_CR2_CPOL /*!< Steady high value on SCLK pin outside transmission window */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_STOPBITS Stop Bits + * @{ + */ +#define LL_USART_STOPBITS_0_5 USART_CR2_STOP_0 /*!< 0.5 stop bit */ +#define LL_USART_STOPBITS_1 0x00000000U /*!< 1 stop bit */ +#define LL_USART_STOPBITS_1_5 (USART_CR2_STOP_0 | USART_CR2_STOP_1) /*!< 1.5 stop bits */ +#define LL_USART_STOPBITS_2 USART_CR2_STOP_1 /*!< 2 stop bits */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_HWCONTROL Hardware Control + * @{ + */ +#define LL_USART_HWCONTROL_NONE 0x00000000U /*!< CTS and RTS hardware flow control disabled */ +#define LL_USART_HWCONTROL_RTS USART_CR3_RTSE /*!< RTS output enabled, data is only requested when there is space in the receive buffer */ +#define LL_USART_HWCONTROL_CTS USART_CR3_CTSE /*!< CTS mode enabled, data is only transmitted when the nCTS input is asserted (tied to 0) */ +#define LL_USART_HWCONTROL_RTS_CTS (USART_CR3_RTSE | USART_CR3_CTSE) /*!< CTS and RTS hardware flow control enabled */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_IRDA_POWER IrDA Power + * @{ + */ +#define LL_USART_IRDA_POWER_NORMAL 0x00000000U /*!< IrDA normal power mode */ +#define LL_USART_IRDA_POWER_LOW USART_CR3_IRLP /*!< IrDA low power mode */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_LINBREAK_DETECT LIN Break Detection Length + * @{ + */ +#define LL_USART_LINBREAK_DETECT_10B 0x00000000U /*!< 10-bit break detection method selected */ +#define LL_USART_LINBREAK_DETECT_11B USART_CR2_LBDL /*!< 11-bit break detection method selected */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup USART_LL_Exported_Macros USART Exported Macros + * @{ + */ + +/** @defgroup USART_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in USART register + * @param __INSTANCE__ USART Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_USART_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in USART register + * @param __INSTANCE__ USART Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_USART_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** @defgroup USART_LL_EM_Exported_Macros_Helper Exported Macros Helper + * @{ + */ + +/** + * @brief Compute USARTDIV value according to Peripheral Clock and + * expected Baud Rate in 8 bits sampling mode (32 bits value of USARTDIV is returned) + * @param __PERIPHCLK__ Peripheral Clock frequency used for USART instance + * @param __BAUDRATE__ Baud rate value to achieve + * @retval USARTDIV value to be used for BRR register filling in OverSampling_8 case + */ +#define __LL_USART_DIV_SAMPLING8_100(__PERIPHCLK__, __BAUDRATE__) ((uint32_t)((((uint64_t)(__PERIPHCLK__))*25)/(2*((uint64_t)(__BAUDRATE__))))) +#define __LL_USART_DIVMANT_SAMPLING8(__PERIPHCLK__, __BAUDRATE__) (__LL_USART_DIV_SAMPLING8_100((__PERIPHCLK__), (__BAUDRATE__))/100) +#define __LL_USART_DIVFRAQ_SAMPLING8(__PERIPHCLK__, __BAUDRATE__) ((((__LL_USART_DIV_SAMPLING8_100((__PERIPHCLK__), (__BAUDRATE__)) - (__LL_USART_DIVMANT_SAMPLING8((__PERIPHCLK__), (__BAUDRATE__)) * 100)) * 8)\ + + 50) / 100) +/* UART BRR = mantissa + overflow + fraction + = (UART DIVMANT << 4) + ((UART DIVFRAQ & 0xF8) << 1) + (UART DIVFRAQ & 0x07) */ +#define __LL_USART_DIV_SAMPLING8(__PERIPHCLK__, __BAUDRATE__) (((__LL_USART_DIVMANT_SAMPLING8((__PERIPHCLK__), (__BAUDRATE__)) << 4) + \ + ((__LL_USART_DIVFRAQ_SAMPLING8((__PERIPHCLK__), (__BAUDRATE__)) & 0xF8) << 1)) + \ + (__LL_USART_DIVFRAQ_SAMPLING8((__PERIPHCLK__), (__BAUDRATE__)) & 0x07)) + +/** + * @brief Compute USARTDIV value according to Peripheral Clock and + * expected Baud Rate in 16 bits sampling mode (32 bits value of USARTDIV is returned) + * @param __PERIPHCLK__ Peripheral Clock frequency used for USART instance + * @param __BAUDRATE__ Baud rate value to achieve + * @retval USARTDIV value to be used for BRR register filling in OverSampling_16 case + */ +#define __LL_USART_DIV_SAMPLING16_100(__PERIPHCLK__, __BAUDRATE__) ((uint32_t)((((uint64_t)(__PERIPHCLK__))*25)/(4*((uint64_t)(__BAUDRATE__))))) +#define __LL_USART_DIVMANT_SAMPLING16(__PERIPHCLK__, __BAUDRATE__) (__LL_USART_DIV_SAMPLING16_100((__PERIPHCLK__), (__BAUDRATE__))/100) +#define __LL_USART_DIVFRAQ_SAMPLING16(__PERIPHCLK__, __BAUDRATE__) ((((__LL_USART_DIV_SAMPLING16_100((__PERIPHCLK__), (__BAUDRATE__)) - (__LL_USART_DIVMANT_SAMPLING16((__PERIPHCLK__), (__BAUDRATE__)) * 100)) * 16)\ + + 50) / 100) +/* USART BRR = mantissa + overflow + fraction + = (USART DIVMANT << 4) + (USART DIVFRAQ & 0xF0) + (USART DIVFRAQ & 0x0F) */ +#define __LL_USART_DIV_SAMPLING16(__PERIPHCLK__, __BAUDRATE__) (((__LL_USART_DIVMANT_SAMPLING16((__PERIPHCLK__), (__BAUDRATE__)) << 4) + \ + (__LL_USART_DIVFRAQ_SAMPLING16((__PERIPHCLK__), (__BAUDRATE__)) & 0xF0)) + \ + (__LL_USART_DIVFRAQ_SAMPLING16((__PERIPHCLK__), (__BAUDRATE__)) & 0x0F)) + +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup USART_LL_Exported_Functions USART Exported Functions + * @{ + */ + +/** @defgroup USART_LL_EF_Configuration Configuration functions + * @{ + */ + +/** + * @brief USART Enable + * @rmtoll CR1 UE LL_USART_Enable + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_Enable(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR1, USART_CR1_UE); +} + +/** + * @brief USART Disable (all USART prescalers and outputs are disabled) + * @note When USART is disabled, USART prescalers and outputs are stopped immediately, + * and current operations are discarded. The configuration of the USART is kept, but all the status + * flags, in the USARTx_SR are set to their default values. + * @rmtoll CR1 UE LL_USART_Disable + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_Disable(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR1, USART_CR1_UE); +} + +/** + * @brief Indicate if USART is enabled + * @rmtoll CR1 UE LL_USART_IsEnabled + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabled(const USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->CR1, USART_CR1_UE) == (USART_CR1_UE)); +} + +/** + * @brief Receiver Enable (Receiver is enabled and begins searching for a start bit) + * @rmtoll CR1 RE LL_USART_EnableDirectionRx + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableDirectionRx(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_RE); +} + +/** + * @brief Receiver Disable + * @rmtoll CR1 RE LL_USART_DisableDirectionRx + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableDirectionRx(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_RE); +} + +/** + * @brief Transmitter Enable + * @rmtoll CR1 TE LL_USART_EnableDirectionTx + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableDirectionTx(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_TE); +} + +/** + * @brief Transmitter Disable + * @rmtoll CR1 TE LL_USART_DisableDirectionTx + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableDirectionTx(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_TE); +} + +/** + * @brief Configure simultaneously enabled/disabled states + * of Transmitter and Receiver + * @rmtoll CR1 RE LL_USART_SetTransferDirection\n + * CR1 TE LL_USART_SetTransferDirection + * @param USARTx USART Instance + * @param TransferDirection This parameter can be one of the following values: + * @arg @ref LL_USART_DIRECTION_NONE + * @arg @ref LL_USART_DIRECTION_RX + * @arg @ref LL_USART_DIRECTION_TX + * @arg @ref LL_USART_DIRECTION_TX_RX + * @retval None + */ +__STATIC_INLINE void LL_USART_SetTransferDirection(USART_TypeDef *USARTx, uint32_t TransferDirection) +{ + ATOMIC_MODIFY_REG(USARTx->CR1, USART_CR1_RE | USART_CR1_TE, TransferDirection); +} + +/** + * @brief Return enabled/disabled states of Transmitter and Receiver + * @rmtoll CR1 RE LL_USART_GetTransferDirection\n + * CR1 TE LL_USART_GetTransferDirection + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_DIRECTION_NONE + * @arg @ref LL_USART_DIRECTION_RX + * @arg @ref LL_USART_DIRECTION_TX + * @arg @ref LL_USART_DIRECTION_TX_RX + */ +__STATIC_INLINE uint32_t LL_USART_GetTransferDirection(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_RE | USART_CR1_TE)); +} + +/** + * @brief Configure Parity (enabled/disabled and parity mode if enabled). + * @note This function selects if hardware parity control (generation and detection) is enabled or disabled. + * When the parity control is enabled (Odd or Even), computed parity bit is inserted at the MSB position + * (9th or 8th bit depending on data width) and parity is checked on the received data. + * @rmtoll CR1 PS LL_USART_SetParity\n + * CR1 PCE LL_USART_SetParity + * @param USARTx USART Instance + * @param Parity This parameter can be one of the following values: + * @arg @ref LL_USART_PARITY_NONE + * @arg @ref LL_USART_PARITY_EVEN + * @arg @ref LL_USART_PARITY_ODD + * @retval None + */ +__STATIC_INLINE void LL_USART_SetParity(USART_TypeDef *USARTx, uint32_t Parity) +{ + MODIFY_REG(USARTx->CR1, USART_CR1_PS | USART_CR1_PCE, Parity); +} + +/** + * @brief Return Parity configuration (enabled/disabled and parity mode if enabled) + * @rmtoll CR1 PS LL_USART_GetParity\n + * CR1 PCE LL_USART_GetParity + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_PARITY_NONE + * @arg @ref LL_USART_PARITY_EVEN + * @arg @ref LL_USART_PARITY_ODD + */ +__STATIC_INLINE uint32_t LL_USART_GetParity(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_PS | USART_CR1_PCE)); +} + +/** + * @brief Set Receiver Wake Up method from Mute mode. + * @rmtoll CR1 WAKE LL_USART_SetWakeUpMethod + * @param USARTx USART Instance + * @param Method This parameter can be one of the following values: + * @arg @ref LL_USART_WAKEUP_IDLELINE + * @arg @ref LL_USART_WAKEUP_ADDRESSMARK + * @retval None + */ +__STATIC_INLINE void LL_USART_SetWakeUpMethod(USART_TypeDef *USARTx, uint32_t Method) +{ + MODIFY_REG(USARTx->CR1, USART_CR1_WAKE, Method); +} + +/** + * @brief Return Receiver Wake Up method from Mute mode + * @rmtoll CR1 WAKE LL_USART_GetWakeUpMethod + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_WAKEUP_IDLELINE + * @arg @ref LL_USART_WAKEUP_ADDRESSMARK + */ +__STATIC_INLINE uint32_t LL_USART_GetWakeUpMethod(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_WAKE)); +} + +/** + * @brief Set Word length (i.e. nb of data bits, excluding start and stop bits) + * @rmtoll CR1 M LL_USART_SetDataWidth + * @param USARTx USART Instance + * @param DataWidth This parameter can be one of the following values: + * @arg @ref LL_USART_DATAWIDTH_8B + * @arg @ref LL_USART_DATAWIDTH_9B + * @retval None + */ +__STATIC_INLINE void LL_USART_SetDataWidth(USART_TypeDef *USARTx, uint32_t DataWidth) +{ + MODIFY_REG(USARTx->CR1, USART_CR1_M, DataWidth); +} + +/** + * @brief Return Word length (i.e. nb of data bits, excluding start and stop bits) + * @rmtoll CR1 M LL_USART_GetDataWidth + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_DATAWIDTH_8B + * @arg @ref LL_USART_DATAWIDTH_9B + */ +__STATIC_INLINE uint32_t LL_USART_GetDataWidth(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_M)); +} + +/** + * @brief Set Oversampling to 8-bit or 16-bit mode + * @rmtoll CR1 OVER8 LL_USART_SetOverSampling + * @param USARTx USART Instance + * @param OverSampling This parameter can be one of the following values: + * @arg @ref LL_USART_OVERSAMPLING_16 + * @arg @ref LL_USART_OVERSAMPLING_8 + * @retval None + */ +__STATIC_INLINE void LL_USART_SetOverSampling(USART_TypeDef *USARTx, uint32_t OverSampling) +{ + MODIFY_REG(USARTx->CR1, USART_CR1_OVER8, OverSampling); +} + +/** + * @brief Return Oversampling mode + * @rmtoll CR1 OVER8 LL_USART_GetOverSampling + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_OVERSAMPLING_16 + * @arg @ref LL_USART_OVERSAMPLING_8 + */ +__STATIC_INLINE uint32_t LL_USART_GetOverSampling(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_OVER8)); +} + +/** + * @brief Configure if Clock pulse of the last data bit is output to the SCLK pin or not + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 LBCL LL_USART_SetLastClkPulseOutput + * @param USARTx USART Instance + * @param LastBitClockPulse This parameter can be one of the following values: + * @arg @ref LL_USART_LASTCLKPULSE_NO_OUTPUT + * @arg @ref LL_USART_LASTCLKPULSE_OUTPUT + * @retval None + */ +__STATIC_INLINE void LL_USART_SetLastClkPulseOutput(USART_TypeDef *USARTx, uint32_t LastBitClockPulse) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_LBCL, LastBitClockPulse); +} + +/** + * @brief Retrieve Clock pulse of the last data bit output configuration + * (Last bit Clock pulse output to the SCLK pin or not) + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 LBCL LL_USART_GetLastClkPulseOutput + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_LASTCLKPULSE_NO_OUTPUT + * @arg @ref LL_USART_LASTCLKPULSE_OUTPUT + */ +__STATIC_INLINE uint32_t LL_USART_GetLastClkPulseOutput(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_LBCL)); +} + +/** + * @brief Select the phase of the clock output on the SCLK pin in synchronous mode + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 CPHA LL_USART_SetClockPhase + * @param USARTx USART Instance + * @param ClockPhase This parameter can be one of the following values: + * @arg @ref LL_USART_PHASE_1EDGE + * @arg @ref LL_USART_PHASE_2EDGE + * @retval None + */ +__STATIC_INLINE void LL_USART_SetClockPhase(USART_TypeDef *USARTx, uint32_t ClockPhase) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_CPHA, ClockPhase); +} + +/** + * @brief Return phase of the clock output on the SCLK pin in synchronous mode + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 CPHA LL_USART_GetClockPhase + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_PHASE_1EDGE + * @arg @ref LL_USART_PHASE_2EDGE + */ +__STATIC_INLINE uint32_t LL_USART_GetClockPhase(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_CPHA)); +} + +/** + * @brief Select the polarity of the clock output on the SCLK pin in synchronous mode + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 CPOL LL_USART_SetClockPolarity + * @param USARTx USART Instance + * @param ClockPolarity This parameter can be one of the following values: + * @arg @ref LL_USART_POLARITY_LOW + * @arg @ref LL_USART_POLARITY_HIGH + * @retval None + */ +__STATIC_INLINE void LL_USART_SetClockPolarity(USART_TypeDef *USARTx, uint32_t ClockPolarity) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_CPOL, ClockPolarity); +} + +/** + * @brief Return polarity of the clock output on the SCLK pin in synchronous mode + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 CPOL LL_USART_GetClockPolarity + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_POLARITY_LOW + * @arg @ref LL_USART_POLARITY_HIGH + */ +__STATIC_INLINE uint32_t LL_USART_GetClockPolarity(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_CPOL)); +} + +/** + * @brief Configure Clock signal format (Phase Polarity and choice about output of last bit clock pulse) + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @note Call of this function is equivalent to following function call sequence : + * - Clock Phase configuration using @ref LL_USART_SetClockPhase() function + * - Clock Polarity configuration using @ref LL_USART_SetClockPolarity() function + * - Output of Last bit Clock pulse configuration using @ref LL_USART_SetLastClkPulseOutput() function + * @rmtoll CR2 CPHA LL_USART_ConfigClock\n + * CR2 CPOL LL_USART_ConfigClock\n + * CR2 LBCL LL_USART_ConfigClock + * @param USARTx USART Instance + * @param Phase This parameter can be one of the following values: + * @arg @ref LL_USART_PHASE_1EDGE + * @arg @ref LL_USART_PHASE_2EDGE + * @param Polarity This parameter can be one of the following values: + * @arg @ref LL_USART_POLARITY_LOW + * @arg @ref LL_USART_POLARITY_HIGH + * @param LBCPOutput This parameter can be one of the following values: + * @arg @ref LL_USART_LASTCLKPULSE_NO_OUTPUT + * @arg @ref LL_USART_LASTCLKPULSE_OUTPUT + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigClock(USART_TypeDef *USARTx, uint32_t Phase, uint32_t Polarity, uint32_t LBCPOutput) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_CPHA | USART_CR2_CPOL | USART_CR2_LBCL, Phase | Polarity | LBCPOutput); +} + +/** + * @brief Enable Clock output on SCLK pin + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 CLKEN LL_USART_EnableSCLKOutput + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableSCLKOutput(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR2, USART_CR2_CLKEN); +} + +/** + * @brief Disable Clock output on SCLK pin + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 CLKEN LL_USART_DisableSCLKOutput + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableSCLKOutput(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR2, USART_CR2_CLKEN); +} + +/** + * @brief Indicate if Clock output on SCLK pin is enabled + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 CLKEN LL_USART_IsEnabledSCLKOutput + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledSCLKOutput(const USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->CR2, USART_CR2_CLKEN) == (USART_CR2_CLKEN)); +} + +/** + * @brief Set the length of the stop bits + * @rmtoll CR2 STOP LL_USART_SetStopBitsLength + * @param USARTx USART Instance + * @param StopBits This parameter can be one of the following values: + * @arg @ref LL_USART_STOPBITS_0_5 + * @arg @ref LL_USART_STOPBITS_1 + * @arg @ref LL_USART_STOPBITS_1_5 + * @arg @ref LL_USART_STOPBITS_2 + * @retval None + */ +__STATIC_INLINE void LL_USART_SetStopBitsLength(USART_TypeDef *USARTx, uint32_t StopBits) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_STOP, StopBits); +} + +/** + * @brief Retrieve the length of the stop bits + * @rmtoll CR2 STOP LL_USART_GetStopBitsLength + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_STOPBITS_0_5 + * @arg @ref LL_USART_STOPBITS_1 + * @arg @ref LL_USART_STOPBITS_1_5 + * @arg @ref LL_USART_STOPBITS_2 + */ +__STATIC_INLINE uint32_t LL_USART_GetStopBitsLength(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_STOP)); +} + +/** + * @brief Configure Character frame format (Datawidth, Parity control, Stop Bits) + * @note Call of this function is equivalent to following function call sequence : + * - Data Width configuration using @ref LL_USART_SetDataWidth() function + * - Parity Control and mode configuration using @ref LL_USART_SetParity() function + * - Stop bits configuration using @ref LL_USART_SetStopBitsLength() function + * @rmtoll CR1 PS LL_USART_ConfigCharacter\n + * CR1 PCE LL_USART_ConfigCharacter\n + * CR1 M LL_USART_ConfigCharacter\n + * CR2 STOP LL_USART_ConfigCharacter + * @param USARTx USART Instance + * @param DataWidth This parameter can be one of the following values: + * @arg @ref LL_USART_DATAWIDTH_8B + * @arg @ref LL_USART_DATAWIDTH_9B + * @param Parity This parameter can be one of the following values: + * @arg @ref LL_USART_PARITY_NONE + * @arg @ref LL_USART_PARITY_EVEN + * @arg @ref LL_USART_PARITY_ODD + * @param StopBits This parameter can be one of the following values: + * @arg @ref LL_USART_STOPBITS_0_5 + * @arg @ref LL_USART_STOPBITS_1 + * @arg @ref LL_USART_STOPBITS_1_5 + * @arg @ref LL_USART_STOPBITS_2 + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigCharacter(USART_TypeDef *USARTx, uint32_t DataWidth, uint32_t Parity, + uint32_t StopBits) +{ + MODIFY_REG(USARTx->CR1, USART_CR1_PS | USART_CR1_PCE | USART_CR1_M, Parity | DataWidth); + MODIFY_REG(USARTx->CR2, USART_CR2_STOP, StopBits); +} + +/** + * @brief Set Address of the USART node. + * @note This is used in multiprocessor communication during Mute mode or Stop mode, + * for wake up with address mark detection. + * @rmtoll CR2 ADD LL_USART_SetNodeAddress + * @param USARTx USART Instance + * @param NodeAddress 4 bit Address of the USART node. + * @retval None + */ +__STATIC_INLINE void LL_USART_SetNodeAddress(USART_TypeDef *USARTx, uint32_t NodeAddress) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_ADD, (NodeAddress & USART_CR2_ADD)); +} + +/** + * @brief Return 4 bit Address of the USART node as set in ADD field of CR2. + * @note only 4bits (b3-b0) of returned value are relevant (b31-b4 are not relevant) + * @rmtoll CR2 ADD LL_USART_GetNodeAddress + * @param USARTx USART Instance + * @retval Address of the USART node (Value between Min_Data=0 and Max_Data=255) + */ +__STATIC_INLINE uint32_t LL_USART_GetNodeAddress(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_ADD)); +} + +/** + * @brief Enable RTS HW Flow Control + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 RTSE LL_USART_EnableRTSHWFlowCtrl + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableRTSHWFlowCtrl(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_RTSE); +} + +/** + * @brief Disable RTS HW Flow Control + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 RTSE LL_USART_DisableRTSHWFlowCtrl + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableRTSHWFlowCtrl(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_RTSE); +} + +/** + * @brief Enable CTS HW Flow Control + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 CTSE LL_USART_EnableCTSHWFlowCtrl + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableCTSHWFlowCtrl(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_CTSE); +} + +/** + * @brief Disable CTS HW Flow Control + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 CTSE LL_USART_DisableCTSHWFlowCtrl + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableCTSHWFlowCtrl(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_CTSE); +} + +/** + * @brief Configure HW Flow Control mode (both CTS and RTS) + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 RTSE LL_USART_SetHWFlowCtrl\n + * CR3 CTSE LL_USART_SetHWFlowCtrl + * @param USARTx USART Instance + * @param HardwareFlowControl This parameter can be one of the following values: + * @arg @ref LL_USART_HWCONTROL_NONE + * @arg @ref LL_USART_HWCONTROL_RTS + * @arg @ref LL_USART_HWCONTROL_CTS + * @arg @ref LL_USART_HWCONTROL_RTS_CTS + * @retval None + */ +__STATIC_INLINE void LL_USART_SetHWFlowCtrl(USART_TypeDef *USARTx, uint32_t HardwareFlowControl) +{ + MODIFY_REG(USARTx->CR3, USART_CR3_RTSE | USART_CR3_CTSE, HardwareFlowControl); +} + +/** + * @brief Return HW Flow Control configuration (both CTS and RTS) + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 RTSE LL_USART_GetHWFlowCtrl\n + * CR3 CTSE LL_USART_GetHWFlowCtrl + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_HWCONTROL_NONE + * @arg @ref LL_USART_HWCONTROL_RTS + * @arg @ref LL_USART_HWCONTROL_CTS + * @arg @ref LL_USART_HWCONTROL_RTS_CTS + */ +__STATIC_INLINE uint32_t LL_USART_GetHWFlowCtrl(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR3, USART_CR3_RTSE | USART_CR3_CTSE)); +} + +/** + * @brief Enable One bit sampling method + * @rmtoll CR3 ONEBIT LL_USART_EnableOneBitSamp + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableOneBitSamp(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_ONEBIT); +} + +/** + * @brief Disable One bit sampling method + * @rmtoll CR3 ONEBIT LL_USART_DisableOneBitSamp + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableOneBitSamp(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_ONEBIT); +} + +/** + * @brief Indicate if One bit sampling method is enabled + * @rmtoll CR3 ONEBIT LL_USART_IsEnabledOneBitSamp + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledOneBitSamp(const USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->CR3, USART_CR3_ONEBIT) == (USART_CR3_ONEBIT)); +} + +/** + * @brief Configure USART BRR register for achieving expected Baud Rate value. + * @note Compute and set USARTDIV value in BRR Register (full BRR content) + * according to used Peripheral Clock, Oversampling mode, and expected Baud Rate values + * @note Peripheral clock and Baud rate values provided as function parameters should be valid + * (Baud rate value != 0) + * @rmtoll BRR BRR LL_USART_SetBaudRate + * @param USARTx USART Instance + * @param PeriphClk Peripheral Clock + * @param OverSampling This parameter can be one of the following values: + * @arg @ref LL_USART_OVERSAMPLING_16 + * @arg @ref LL_USART_OVERSAMPLING_8 + * @param BaudRate Baud Rate + * @retval None + */ +__STATIC_INLINE void LL_USART_SetBaudRate(USART_TypeDef *USARTx, uint32_t PeriphClk, uint32_t OverSampling, + uint32_t BaudRate) +{ + if (OverSampling == LL_USART_OVERSAMPLING_8) + { + USARTx->BRR = (uint16_t)(__LL_USART_DIV_SAMPLING8(PeriphClk, BaudRate)); + } + else + { + USARTx->BRR = (uint16_t)(__LL_USART_DIV_SAMPLING16(PeriphClk, BaudRate)); + } +} + +/** + * @brief Return current Baud Rate value, according to USARTDIV present in BRR register + * (full BRR content), and to used Peripheral Clock and Oversampling mode values + * @note In case of non-initialized or invalid value stored in BRR register, value 0 will be returned. + * @rmtoll BRR BRR LL_USART_GetBaudRate + * @param USARTx USART Instance + * @param PeriphClk Peripheral Clock + * @param OverSampling This parameter can be one of the following values: + * @arg @ref LL_USART_OVERSAMPLING_16 + * @arg @ref LL_USART_OVERSAMPLING_8 + * @retval Baud Rate + */ +__STATIC_INLINE uint32_t LL_USART_GetBaudRate(const USART_TypeDef *USARTx, uint32_t PeriphClk, uint32_t OverSampling) +{ + uint32_t usartdiv = 0x0U; + uint32_t brrresult = 0x0U; + + usartdiv = USARTx->BRR; + + if (OverSampling == LL_USART_OVERSAMPLING_8) + { + if ((usartdiv & 0xFFF7U) != 0U) + { + usartdiv = (uint16_t)((usartdiv & 0xFFF0U) | ((usartdiv & 0x0007U) << 1U)) ; + brrresult = (PeriphClk * 2U) / usartdiv; + } + } + else + { + if ((usartdiv & 0xFFFFU) != 0U) + { + brrresult = PeriphClk / usartdiv; + } + } + return (brrresult); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_Configuration_IRDA Configuration functions related to Irda feature + * @{ + */ + +/** + * @brief Enable IrDA mode + * @note Macro IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @rmtoll CR3 IREN LL_USART_EnableIrda + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIrda(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_IREN); +} + +/** + * @brief Disable IrDA mode + * @note Macro IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @rmtoll CR3 IREN LL_USART_DisableIrda + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIrda(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_IREN); +} + +/** + * @brief Indicate if IrDA mode is enabled + * @note Macro IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @rmtoll CR3 IREN LL_USART_IsEnabledIrda + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIrda(const USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->CR3, USART_CR3_IREN) == (USART_CR3_IREN)); +} + +/** + * @brief Configure IrDA Power Mode (Normal or Low Power) + * @note Macro IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @rmtoll CR3 IRLP LL_USART_SetIrdaPowerMode + * @param USARTx USART Instance + * @param PowerMode This parameter can be one of the following values: + * @arg @ref LL_USART_IRDA_POWER_NORMAL + * @arg @ref LL_USART_IRDA_POWER_LOW + * @retval None + */ +__STATIC_INLINE void LL_USART_SetIrdaPowerMode(USART_TypeDef *USARTx, uint32_t PowerMode) +{ + MODIFY_REG(USARTx->CR3, USART_CR3_IRLP, PowerMode); +} + +/** + * @brief Retrieve IrDA Power Mode configuration (Normal or Low Power) + * @note Macro IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @rmtoll CR3 IRLP LL_USART_GetIrdaPowerMode + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_IRDA_POWER_NORMAL + * @arg @ref LL_USART_PHASE_2EDGE + */ +__STATIC_INLINE uint32_t LL_USART_GetIrdaPowerMode(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR3, USART_CR3_IRLP)); +} + +/** + * @brief Set Irda prescaler value, used for dividing the USART clock source + * to achieve the Irda Low Power frequency (8 bits value) + * @note Macro IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @rmtoll GTPR PSC LL_USART_SetIrdaPrescaler + * @param USARTx USART Instance + * @param PrescalerValue Value between Min_Data=0x00 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_USART_SetIrdaPrescaler(USART_TypeDef *USARTx, uint32_t PrescalerValue) +{ + MODIFY_REG(USARTx->GTPR, USART_GTPR_PSC, PrescalerValue); +} + +/** + * @brief Return Irda prescaler value, used for dividing the USART clock source + * to achieve the Irda Low Power frequency (8 bits value) + * @note Macro IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @rmtoll GTPR PSC LL_USART_GetIrdaPrescaler + * @param USARTx USART Instance + * @retval Irda prescaler value (Value between Min_Data=0x00 and Max_Data=0xFF) + */ +__STATIC_INLINE uint32_t LL_USART_GetIrdaPrescaler(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->GTPR, USART_GTPR_PSC)); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_Configuration_Smartcard Configuration functions related to Smartcard feature + * @{ + */ + +/** + * @brief Enable Smartcard NACK transmission + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 NACK LL_USART_EnableSmartcardNACK + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableSmartcardNACK(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_NACK); +} + +/** + * @brief Disable Smartcard NACK transmission + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 NACK LL_USART_DisableSmartcardNACK + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableSmartcardNACK(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_NACK); +} + +/** + * @brief Indicate if Smartcard NACK transmission is enabled + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 NACK LL_USART_IsEnabledSmartcardNACK + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledSmartcardNACK(const USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->CR3, USART_CR3_NACK) == (USART_CR3_NACK)); +} + +/** + * @brief Enable Smartcard mode + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 SCEN LL_USART_EnableSmartcard + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableSmartcard(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_SCEN); +} + +/** + * @brief Disable Smartcard mode + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 SCEN LL_USART_DisableSmartcard + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableSmartcard(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_SCEN); +} + +/** + * @brief Indicate if Smartcard mode is enabled + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 SCEN LL_USART_IsEnabledSmartcard + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledSmartcard(const USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->CR3, USART_CR3_SCEN) == (USART_CR3_SCEN)); +} + +/** + * @brief Set Smartcard prescaler value, used for dividing the USART clock + * source to provide the SMARTCARD Clock (5 bits value) + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll GTPR PSC LL_USART_SetSmartcardPrescaler + * @param USARTx USART Instance + * @param PrescalerValue Value between Min_Data=0 and Max_Data=31 + * @retval None + */ +__STATIC_INLINE void LL_USART_SetSmartcardPrescaler(USART_TypeDef *USARTx, uint32_t PrescalerValue) +{ + MODIFY_REG(USARTx->GTPR, USART_GTPR_PSC, PrescalerValue); +} + +/** + * @brief Return Smartcard prescaler value, used for dividing the USART clock + * source to provide the SMARTCARD Clock (5 bits value) + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll GTPR PSC LL_USART_GetSmartcardPrescaler + * @param USARTx USART Instance + * @retval Smartcard prescaler value (Value between Min_Data=0 and Max_Data=31) + */ +__STATIC_INLINE uint32_t LL_USART_GetSmartcardPrescaler(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->GTPR, USART_GTPR_PSC)); +} + +/** + * @brief Set Smartcard Guard time value, expressed in nb of baud clocks periods + * (GT[7:0] bits : Guard time value) + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll GTPR GT LL_USART_SetSmartcardGuardTime + * @param USARTx USART Instance + * @param GuardTime Value between Min_Data=0x00 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_USART_SetSmartcardGuardTime(USART_TypeDef *USARTx, uint32_t GuardTime) +{ + MODIFY_REG(USARTx->GTPR, USART_GTPR_GT, GuardTime << USART_POSITION_GTPR_GT); +} + +/** + * @brief Return Smartcard Guard time value, expressed in nb of baud clocks periods + * (GT[7:0] bits : Guard time value) + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll GTPR GT LL_USART_GetSmartcardGuardTime + * @param USARTx USART Instance + * @retval Smartcard Guard time value (Value between Min_Data=0x00 and Max_Data=0xFF) + */ +__STATIC_INLINE uint32_t LL_USART_GetSmartcardGuardTime(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->GTPR, USART_GTPR_GT) >> USART_POSITION_GTPR_GT); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_Configuration_HalfDuplex Configuration functions related to Half Duplex feature + * @{ + */ + +/** + * @brief Enable Single Wire Half-Duplex mode + * @note Macro IS_UART_HALFDUPLEX_INSTANCE(USARTx) can be used to check whether or not + * Half-Duplex mode is supported by the USARTx instance. + * @rmtoll CR3 HDSEL LL_USART_EnableHalfDuplex + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableHalfDuplex(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_HDSEL); +} + +/** + * @brief Disable Single Wire Half-Duplex mode + * @note Macro IS_UART_HALFDUPLEX_INSTANCE(USARTx) can be used to check whether or not + * Half-Duplex mode is supported by the USARTx instance. + * @rmtoll CR3 HDSEL LL_USART_DisableHalfDuplex + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableHalfDuplex(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_HDSEL); +} + +/** + * @brief Indicate if Single Wire Half-Duplex mode is enabled + * @note Macro IS_UART_HALFDUPLEX_INSTANCE(USARTx) can be used to check whether or not + * Half-Duplex mode is supported by the USARTx instance. + * @rmtoll CR3 HDSEL LL_USART_IsEnabledHalfDuplex + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledHalfDuplex(const USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->CR3, USART_CR3_HDSEL) == (USART_CR3_HDSEL)); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_Configuration_LIN Configuration functions related to LIN feature + * @{ + */ + +/** + * @brief Set LIN Break Detection Length + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LBDL LL_USART_SetLINBrkDetectionLen + * @param USARTx USART Instance + * @param LINBDLength This parameter can be one of the following values: + * @arg @ref LL_USART_LINBREAK_DETECT_10B + * @arg @ref LL_USART_LINBREAK_DETECT_11B + * @retval None + */ +__STATIC_INLINE void LL_USART_SetLINBrkDetectionLen(USART_TypeDef *USARTx, uint32_t LINBDLength) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_LBDL, LINBDLength); +} + +/** + * @brief Return LIN Break Detection Length + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LBDL LL_USART_GetLINBrkDetectionLen + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_LINBREAK_DETECT_10B + * @arg @ref LL_USART_LINBREAK_DETECT_11B + */ +__STATIC_INLINE uint32_t LL_USART_GetLINBrkDetectionLen(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_LBDL)); +} + +/** + * @brief Enable LIN mode + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LINEN LL_USART_EnableLIN + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableLIN(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR2, USART_CR2_LINEN); +} + +/** + * @brief Disable LIN mode + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LINEN LL_USART_DisableLIN + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableLIN(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR2, USART_CR2_LINEN); +} + +/** + * @brief Indicate if LIN mode is enabled + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LINEN LL_USART_IsEnabledLIN + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledLIN(const USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->CR2, USART_CR2_LINEN) == (USART_CR2_LINEN)); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_AdvancedConfiguration Advanced Configurations services + * @{ + */ + +/** + * @brief Perform basic configuration of USART for enabling use in Asynchronous Mode (UART) + * @note In UART mode, the following bits must be kept cleared: + * - LINEN bit in the USART_CR2 register, + * - CLKEN bit in the USART_CR2 register, + * - SCEN bit in the USART_CR3 register, + * - IREN bit in the USART_CR3 register, + * - HDSEL bit in the USART_CR3 register. + * @note Call of this function is equivalent to following function call sequence : + * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function + * - Clear CLKEN in CR2 using @ref LL_USART_DisableSCLKOutput() function + * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function + * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function + * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function + * @note Other remaining configurations items related to Asynchronous Mode + * (as Baud Rate, Word length, Parity, ...) should be set using + * dedicated functions + * @rmtoll CR2 LINEN LL_USART_ConfigAsyncMode\n + * CR2 CLKEN LL_USART_ConfigAsyncMode\n + * CR3 SCEN LL_USART_ConfigAsyncMode\n + * CR3 IREN LL_USART_ConfigAsyncMode\n + * CR3 HDSEL LL_USART_ConfigAsyncMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigAsyncMode(USART_TypeDef *USARTx) +{ + /* In Asynchronous mode, the following bits must be kept cleared: + - LINEN, CLKEN bits in the USART_CR2 register, + - SCEN, IREN and HDSEL bits in the USART_CR3 register.*/ + CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); + CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_IREN | USART_CR3_HDSEL)); +} + +/** + * @brief Perform basic configuration of USART for enabling use in Synchronous Mode + * @note In Synchronous mode, the following bits must be kept cleared: + * - LINEN bit in the USART_CR2 register, + * - SCEN bit in the USART_CR3 register, + * - IREN bit in the USART_CR3 register, + * - HDSEL bit in the USART_CR3 register. + * This function also sets the USART in Synchronous mode. + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @note Call of this function is equivalent to following function call sequence : + * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function + * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function + * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function + * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function + * - Set CLKEN in CR2 using @ref LL_USART_EnableSCLKOutput() function + * @note Other remaining configurations items related to Synchronous Mode + * (as Baud Rate, Word length, Parity, Clock Polarity, ...) should be set using + * dedicated functions + * @rmtoll CR2 LINEN LL_USART_ConfigSyncMode\n + * CR2 CLKEN LL_USART_ConfigSyncMode\n + * CR3 SCEN LL_USART_ConfigSyncMode\n + * CR3 IREN LL_USART_ConfigSyncMode\n + * CR3 HDSEL LL_USART_ConfigSyncMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigSyncMode(USART_TypeDef *USARTx) +{ + /* In Synchronous mode, the following bits must be kept cleared: + - LINEN bit in the USART_CR2 register, + - SCEN, IREN and HDSEL bits in the USART_CR3 register.*/ + CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN)); + CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_IREN | USART_CR3_HDSEL)); + /* set the UART/USART in Synchronous mode */ + SET_BIT(USARTx->CR2, USART_CR2_CLKEN); +} + +/** + * @brief Perform basic configuration of USART for enabling use in LIN Mode + * @note In LIN mode, the following bits must be kept cleared: + * - STOP and CLKEN bits in the USART_CR2 register, + * - SCEN bit in the USART_CR3 register, + * - IREN bit in the USART_CR3 register, + * - HDSEL bit in the USART_CR3 register. + * This function also set the UART/USART in LIN mode. + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @note Call of this function is equivalent to following function call sequence : + * - Clear CLKEN in CR2 using @ref LL_USART_DisableSCLKOutput() function + * - Clear STOP in CR2 using @ref LL_USART_SetStopBitsLength() function + * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function + * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function + * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function + * - Set LINEN in CR2 using @ref LL_USART_EnableLIN() function + * @note Other remaining configurations items related to LIN Mode + * (as Baud Rate, Word length, LIN Break Detection Length, ...) should be set using + * dedicated functions + * @rmtoll CR2 CLKEN LL_USART_ConfigLINMode\n + * CR2 STOP LL_USART_ConfigLINMode\n + * CR2 LINEN LL_USART_ConfigLINMode\n + * CR3 IREN LL_USART_ConfigLINMode\n + * CR3 SCEN LL_USART_ConfigLINMode\n + * CR3 HDSEL LL_USART_ConfigLINMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigLINMode(USART_TypeDef *USARTx) +{ + /* In LIN mode, the following bits must be kept cleared: + - STOP and CLKEN bits in the USART_CR2 register, + - IREN, SCEN and HDSEL bits in the USART_CR3 register.*/ + CLEAR_BIT(USARTx->CR2, (USART_CR2_CLKEN | USART_CR2_STOP)); + CLEAR_BIT(USARTx->CR3, (USART_CR3_IREN | USART_CR3_SCEN | USART_CR3_HDSEL)); + /* Set the UART/USART in LIN mode */ + SET_BIT(USARTx->CR2, USART_CR2_LINEN); +} + +/** + * @brief Perform basic configuration of USART for enabling use in Half Duplex Mode + * @note In Half Duplex mode, the following bits must be kept cleared: + * - LINEN bit in the USART_CR2 register, + * - CLKEN bit in the USART_CR2 register, + * - SCEN bit in the USART_CR3 register, + * - IREN bit in the USART_CR3 register, + * This function also sets the UART/USART in Half Duplex mode. + * @note Macro IS_UART_HALFDUPLEX_INSTANCE(USARTx) can be used to check whether or not + * Half-Duplex mode is supported by the USARTx instance. + * @note Call of this function is equivalent to following function call sequence : + * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function + * - Clear CLKEN in CR2 using @ref LL_USART_DisableSCLKOutput() function + * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function + * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function + * - Set HDSEL in CR3 using @ref LL_USART_EnableHalfDuplex() function + * @note Other remaining configurations items related to Half Duplex Mode + * (as Baud Rate, Word length, Parity, ...) should be set using + * dedicated functions + * @rmtoll CR2 LINEN LL_USART_ConfigHalfDuplexMode\n + * CR2 CLKEN LL_USART_ConfigHalfDuplexMode\n + * CR3 HDSEL LL_USART_ConfigHalfDuplexMode\n + * CR3 SCEN LL_USART_ConfigHalfDuplexMode\n + * CR3 IREN LL_USART_ConfigHalfDuplexMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigHalfDuplexMode(USART_TypeDef *USARTx) +{ + /* In Half Duplex mode, the following bits must be kept cleared: + - LINEN and CLKEN bits in the USART_CR2 register, + - SCEN and IREN bits in the USART_CR3 register.*/ + CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); + CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_IREN)); + /* set the UART/USART in Half Duplex mode */ + SET_BIT(USARTx->CR3, USART_CR3_HDSEL); +} + +/** + * @brief Perform basic configuration of USART for enabling use in Smartcard Mode + * @note In Smartcard mode, the following bits must be kept cleared: + * - LINEN bit in the USART_CR2 register, + * - IREN bit in the USART_CR3 register, + * - HDSEL bit in the USART_CR3 register. + * This function also configures Stop bits to 1.5 bits and + * sets the USART in Smartcard mode (SCEN bit). + * Clock Output is also enabled (CLKEN). + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @note Call of this function is equivalent to following function call sequence : + * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function + * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function + * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function + * - Configure STOP in CR2 using @ref LL_USART_SetStopBitsLength() function + * - Set CLKEN in CR2 using @ref LL_USART_EnableSCLKOutput() function + * - Set SCEN in CR3 using @ref LL_USART_EnableSmartcard() function + * @note Other remaining configurations items related to Smartcard Mode + * (as Baud Rate, Word length, Parity, ...) should be set using + * dedicated functions + * @rmtoll CR2 LINEN LL_USART_ConfigSmartcardMode\n + * CR2 STOP LL_USART_ConfigSmartcardMode\n + * CR2 CLKEN LL_USART_ConfigSmartcardMode\n + * CR3 HDSEL LL_USART_ConfigSmartcardMode\n + * CR3 SCEN LL_USART_ConfigSmartcardMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigSmartcardMode(USART_TypeDef *USARTx) +{ + /* In Smartcard mode, the following bits must be kept cleared: + - LINEN bit in the USART_CR2 register, + - IREN and HDSEL bits in the USART_CR3 register.*/ + CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN)); + CLEAR_BIT(USARTx->CR3, (USART_CR3_IREN | USART_CR3_HDSEL)); + /* Configure Stop bits to 1.5 bits */ + /* Synchronous mode is activated by default */ + SET_BIT(USARTx->CR2, (USART_CR2_STOP_0 | USART_CR2_STOP_1 | USART_CR2_CLKEN)); + /* set the UART/USART in Smartcard mode */ + SET_BIT(USARTx->CR3, USART_CR3_SCEN); +} + +/** + * @brief Perform basic configuration of USART for enabling use in Irda Mode + * @note In IRDA mode, the following bits must be kept cleared: + * - LINEN bit in the USART_CR2 register, + * - STOP and CLKEN bits in the USART_CR2 register, + * - SCEN bit in the USART_CR3 register, + * - HDSEL bit in the USART_CR3 register. + * This function also sets the UART/USART in IRDA mode (IREN bit). + * @note Macro IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @note Call of this function is equivalent to following function call sequence : + * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function + * - Clear CLKEN in CR2 using @ref LL_USART_DisableSCLKOutput() function + * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function + * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function + * - Configure STOP in CR2 using @ref LL_USART_SetStopBitsLength() function + * - Set IREN in CR3 using @ref LL_USART_EnableIrda() function + * @note Other remaining configurations items related to Irda Mode + * (as Baud Rate, Word length, Power mode, ...) should be set using + * dedicated functions + * @rmtoll CR2 LINEN LL_USART_ConfigIrdaMode\n + * CR2 CLKEN LL_USART_ConfigIrdaMode\n + * CR2 STOP LL_USART_ConfigIrdaMode\n + * CR3 SCEN LL_USART_ConfigIrdaMode\n + * CR3 HDSEL LL_USART_ConfigIrdaMode\n + * CR3 IREN LL_USART_ConfigIrdaMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigIrdaMode(USART_TypeDef *USARTx) +{ + /* In IRDA mode, the following bits must be kept cleared: + - LINEN, STOP and CLKEN bits in the USART_CR2 register, + - SCEN and HDSEL bits in the USART_CR3 register.*/ + CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN | USART_CR2_STOP)); + CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL)); + /* set the UART/USART in IRDA mode */ + SET_BIT(USARTx->CR3, USART_CR3_IREN); +} + +/** + * @brief Perform basic configuration of USART for enabling use in Multi processor Mode + * (several USARTs connected in a network, one of the USARTs can be the master, + * its TX output connected to the RX inputs of the other slaves USARTs). + * @note In MultiProcessor mode, the following bits must be kept cleared: + * - LINEN bit in the USART_CR2 register, + * - CLKEN bit in the USART_CR2 register, + * - SCEN bit in the USART_CR3 register, + * - IREN bit in the USART_CR3 register, + * - HDSEL bit in the USART_CR3 register. + * @note Call of this function is equivalent to following function call sequence : + * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function + * - Clear CLKEN in CR2 using @ref LL_USART_DisableSCLKOutput() function + * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function + * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function + * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function + * @note Other remaining configurations items related to Multi processor Mode + * (as Baud Rate, Wake Up Method, Node address, ...) should be set using + * dedicated functions + * @rmtoll CR2 LINEN LL_USART_ConfigMultiProcessMode\n + * CR2 CLKEN LL_USART_ConfigMultiProcessMode\n + * CR3 SCEN LL_USART_ConfigMultiProcessMode\n + * CR3 HDSEL LL_USART_ConfigMultiProcessMode\n + * CR3 IREN LL_USART_ConfigMultiProcessMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigMultiProcessMode(USART_TypeDef *USARTx) +{ + /* In Multi Processor mode, the following bits must be kept cleared: + - LINEN and CLKEN bits in the USART_CR2 register, + - IREN, SCEN and HDSEL bits in the USART_CR3 register.*/ + CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); + CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN)); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_FLAG_Management FLAG_Management + * @{ + */ + +/** + * @brief Check if the USART Parity Error Flag is set or not + * @rmtoll SR PE LL_USART_IsActiveFlag_PE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_PE(const USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->SR, USART_SR_PE) == (USART_SR_PE)); +} + +/** + * @brief Check if the USART Framing Error Flag is set or not + * @rmtoll SR FE LL_USART_IsActiveFlag_FE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_FE(const USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->SR, USART_SR_FE) == (USART_SR_FE)); +} + +/** + * @brief Check if the USART Noise error detected Flag is set or not + * @rmtoll SR NF LL_USART_IsActiveFlag_NE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_NE(const USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->SR, USART_SR_NE) == (USART_SR_NE)); +} + +/** + * @brief Check if the USART OverRun Error Flag is set or not + * @rmtoll SR ORE LL_USART_IsActiveFlag_ORE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_ORE(const USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->SR, USART_SR_ORE) == (USART_SR_ORE)); +} + +/** + * @brief Check if the USART IDLE line detected Flag is set or not + * @rmtoll SR IDLE LL_USART_IsActiveFlag_IDLE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_IDLE(const USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->SR, USART_SR_IDLE) == (USART_SR_IDLE)); +} + +/** + * @brief Check if the USART Read Data Register Not Empty Flag is set or not + * @rmtoll SR RXNE LL_USART_IsActiveFlag_RXNE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_RXNE(const USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->SR, USART_SR_RXNE) == (USART_SR_RXNE)); +} + +/** + * @brief Check if the USART Transmission Complete Flag is set or not + * @rmtoll SR TC LL_USART_IsActiveFlag_TC + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_TC(const USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->SR, USART_SR_TC) == (USART_SR_TC)); +} + +/** + * @brief Check if the USART Transmit Data Register Empty Flag is set or not + * @rmtoll SR TXE LL_USART_IsActiveFlag_TXE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_TXE(const USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->SR, USART_SR_TXE) == (USART_SR_TXE)); +} + +/** + * @brief Check if the USART LIN Break Detection Flag is set or not + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll SR LBD LL_USART_IsActiveFlag_LBD + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_LBD(const USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->SR, USART_SR_LBD) == (USART_SR_LBD)); +} + +/** + * @brief Check if the USART CTS Flag is set or not + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll SR CTS LL_USART_IsActiveFlag_nCTS + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_nCTS(const USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->SR, USART_SR_CTS) == (USART_SR_CTS)); +} + +/** + * @brief Check if the USART Send Break Flag is set or not + * @rmtoll CR1 SBK LL_USART_IsActiveFlag_SBK + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_SBK(const USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->CR1, USART_CR1_SBK) == (USART_CR1_SBK)); +} + +/** + * @brief Check if the USART Receive Wake Up from mute mode Flag is set or not + * @rmtoll CR1 RWU LL_USART_IsActiveFlag_RWU + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_RWU(const USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->CR1, USART_CR1_RWU) == (USART_CR1_RWU)); +} + +/** + * @brief Clear Parity Error Flag + * @note Clearing this flag is done by a read access to the USARTx_SR + * register followed by a read access to the USARTx_DR register. + * @note Please also consider that when clearing this flag, other flags as + * NE, FE, ORE, IDLE would also be cleared. + * @rmtoll SR PE LL_USART_ClearFlag_PE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_PE(USART_TypeDef *USARTx) +{ + __IO uint32_t tmpreg; + tmpreg = USARTx->SR; + (void) tmpreg; + tmpreg = USARTx->DR; + (void) tmpreg; +} + +/** + * @brief Clear Framing Error Flag + * @note Clearing this flag is done by a read access to the USARTx_SR + * register followed by a read access to the USARTx_DR register. + * @note Please also consider that when clearing this flag, other flags as + * PE, NE, ORE, IDLE would also be cleared. + * @rmtoll SR FE LL_USART_ClearFlag_FE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_FE(USART_TypeDef *USARTx) +{ + __IO uint32_t tmpreg; + tmpreg = USARTx->SR; + (void) tmpreg; + tmpreg = USARTx->DR; + (void) tmpreg; +} + +/** + * @brief Clear Noise detected Flag + * @note Clearing this flag is done by a read access to the USARTx_SR + * register followed by a read access to the USARTx_DR register. + * @note Please also consider that when clearing this flag, other flags as + * PE, FE, ORE, IDLE would also be cleared. + * @rmtoll SR NF LL_USART_ClearFlag_NE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_NE(USART_TypeDef *USARTx) +{ + __IO uint32_t tmpreg; + tmpreg = USARTx->SR; + (void) tmpreg; + tmpreg = USARTx->DR; + (void) tmpreg; +} + +/** + * @brief Clear OverRun Error Flag + * @note Clearing this flag is done by a read access to the USARTx_SR + * register followed by a read access to the USARTx_DR register. + * @note Please also consider that when clearing this flag, other flags as + * PE, NE, FE, IDLE would also be cleared. + * @rmtoll SR ORE LL_USART_ClearFlag_ORE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_ORE(USART_TypeDef *USARTx) +{ + __IO uint32_t tmpreg; + tmpreg = USARTx->SR; + (void) tmpreg; + tmpreg = USARTx->DR; + (void) tmpreg; +} + +/** + * @brief Clear IDLE line detected Flag + * @note Clearing this flag is done by a read access to the USARTx_SR + * register followed by a read access to the USARTx_DR register. + * @note Please also consider that when clearing this flag, other flags as + * PE, NE, FE, ORE would also be cleared. + * @rmtoll SR IDLE LL_USART_ClearFlag_IDLE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_IDLE(USART_TypeDef *USARTx) +{ + __IO uint32_t tmpreg; + tmpreg = USARTx->SR; + (void) tmpreg; + tmpreg = USARTx->DR; + (void) tmpreg; +} + +/** + * @brief Clear Transmission Complete Flag + * @rmtoll SR TC LL_USART_ClearFlag_TC + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_TC(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->SR, ~(USART_SR_TC)); +} + +/** + * @brief Clear RX Not Empty Flag + * @rmtoll SR RXNE LL_USART_ClearFlag_RXNE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_RXNE(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->SR, ~(USART_SR_RXNE)); +} + +/** + * @brief Clear LIN Break Detection Flag + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll SR LBD LL_USART_ClearFlag_LBD + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_LBD(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->SR, ~(USART_SR_LBD)); +} + +/** + * @brief Clear CTS Interrupt Flag + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll SR CTS LL_USART_ClearFlag_nCTS + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_nCTS(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->SR, ~(USART_SR_CTS)); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_IT_Management IT_Management + * @{ + */ + +/** + * @brief Enable IDLE Interrupt + * @rmtoll CR1 IDLEIE LL_USART_EnableIT_IDLE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_IDLE(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_IDLEIE); +} + +/** + * @brief Enable RX Not Empty Interrupt + * @rmtoll CR1 RXNEIE LL_USART_EnableIT_RXNE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_RXNE(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_RXNEIE); +} + +/** + * @brief Enable Transmission Complete Interrupt + * @rmtoll CR1 TCIE LL_USART_EnableIT_TC + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_TC(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_TCIE); +} + +/** + * @brief Enable TX Empty Interrupt + * @rmtoll CR1 TXEIE LL_USART_EnableIT_TXE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_TXE(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_TXEIE); +} + +/** + * @brief Enable Parity Error Interrupt + * @rmtoll CR1 PEIE LL_USART_EnableIT_PE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_PE(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_PEIE); +} + +/** + * @brief Enable LIN Break Detection Interrupt + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LBDIE LL_USART_EnableIT_LBD + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_LBD(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR2, USART_CR2_LBDIE); +} + +/** + * @brief Enable Error Interrupt + * @note When set, Error Interrupt Enable Bit is enabling interrupt generation in case of a framing + * error, overrun error or noise flag (FE=1 or ORE=1 or NF=1 in the USARTx_SR register). + * 0: Interrupt is inhibited + * 1: An interrupt is generated when FE=1 or ORE=1 or NF=1 in the USARTx_SR register. + * @rmtoll CR3 EIE LL_USART_EnableIT_ERROR + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_ERROR(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_EIE); +} + +/** + * @brief Enable CTS Interrupt + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 CTSIE LL_USART_EnableIT_CTS + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_CTS(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_CTSIE); +} + +/** + * @brief Disable IDLE Interrupt + * @rmtoll CR1 IDLEIE LL_USART_DisableIT_IDLE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_IDLE(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_IDLEIE); +} + +/** + * @brief Disable RX Not Empty Interrupt + * @rmtoll CR1 RXNEIE LL_USART_DisableIT_RXNE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_RXNE(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_RXNEIE); +} + +/** + * @brief Disable Transmission Complete Interrupt + * @rmtoll CR1 TCIE LL_USART_DisableIT_TC + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_TC(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_TCIE); +} + +/** + * @brief Disable TX Empty Interrupt + * @rmtoll CR1 TXEIE LL_USART_DisableIT_TXE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_TXE(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_TXEIE); +} + +/** + * @brief Disable Parity Error Interrupt + * @rmtoll CR1 PEIE LL_USART_DisableIT_PE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_PE(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_PEIE); +} + +/** + * @brief Disable LIN Break Detection Interrupt + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LBDIE LL_USART_DisableIT_LBD + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_LBD(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR2, USART_CR2_LBDIE); +} + +/** + * @brief Disable Error Interrupt + * @note When set, Error Interrupt Enable Bit is enabling interrupt generation in case of a framing + * error, overrun error or noise flag (FE=1 or ORE=1 or NF=1 in the USARTx_SR register). + * 0: Interrupt is inhibited + * 1: An interrupt is generated when FE=1 or ORE=1 or NF=1 in the USARTx_SR register. + * @rmtoll CR3 EIE LL_USART_DisableIT_ERROR + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_ERROR(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_EIE); +} + +/** + * @brief Disable CTS Interrupt + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 CTSIE LL_USART_DisableIT_CTS + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_CTS(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_CTSIE); +} + +/** + * @brief Check if the USART IDLE Interrupt source is enabled or disabled. + * @rmtoll CR1 IDLEIE LL_USART_IsEnabledIT_IDLE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_IDLE(const USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->CR1, USART_CR1_IDLEIE) == (USART_CR1_IDLEIE)); +} + +/** + * @brief Check if the USART RX Not Empty Interrupt is enabled or disabled. + * @rmtoll CR1 RXNEIE LL_USART_IsEnabledIT_RXNE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_RXNE(const USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->CR1, USART_CR1_RXNEIE) == (USART_CR1_RXNEIE)); +} + +/** + * @brief Check if the USART Transmission Complete Interrupt is enabled or disabled. + * @rmtoll CR1 TCIE LL_USART_IsEnabledIT_TC + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_TC(const USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->CR1, USART_CR1_TCIE) == (USART_CR1_TCIE)); +} + +/** + * @brief Check if the USART TX Empty Interrupt is enabled or disabled. + * @rmtoll CR1 TXEIE LL_USART_IsEnabledIT_TXE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_TXE(const USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->CR1, USART_CR1_TXEIE) == (USART_CR1_TXEIE)); +} + +/** + * @brief Check if the USART Parity Error Interrupt is enabled or disabled. + * @rmtoll CR1 PEIE LL_USART_IsEnabledIT_PE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_PE(const USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->CR1, USART_CR1_PEIE) == (USART_CR1_PEIE)); +} + +/** + * @brief Check if the USART LIN Break Detection Interrupt is enabled or disabled. + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LBDIE LL_USART_IsEnabledIT_LBD + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_LBD(const USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->CR2, USART_CR2_LBDIE) == (USART_CR2_LBDIE)); +} + +/** + * @brief Check if the USART Error Interrupt is enabled or disabled. + * @rmtoll CR3 EIE LL_USART_IsEnabledIT_ERROR + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_ERROR(const USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->CR3, USART_CR3_EIE) == (USART_CR3_EIE)); +} + +/** + * @brief Check if the USART CTS Interrupt is enabled or disabled. + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 CTSIE LL_USART_IsEnabledIT_CTS + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_CTS(const USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->CR3, USART_CR3_CTSIE) == (USART_CR3_CTSIE)); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_DMA_Management DMA_Management + * @{ + */ + +/** + * @brief Enable DMA Mode for reception + * @rmtoll CR3 DMAR LL_USART_EnableDMAReq_RX + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableDMAReq_RX(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_DMAR); +} + +/** + * @brief Disable DMA Mode for reception + * @rmtoll CR3 DMAR LL_USART_DisableDMAReq_RX + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableDMAReq_RX(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_DMAR); +} + +/** + * @brief Check if DMA Mode is enabled for reception + * @rmtoll CR3 DMAR LL_USART_IsEnabledDMAReq_RX + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledDMAReq_RX(const USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->CR3, USART_CR3_DMAR) == (USART_CR3_DMAR)); +} + +/** + * @brief Enable DMA Mode for transmission + * @rmtoll CR3 DMAT LL_USART_EnableDMAReq_TX + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableDMAReq_TX(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_DMAT); +} + +/** + * @brief Disable DMA Mode for transmission + * @rmtoll CR3 DMAT LL_USART_DisableDMAReq_TX + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableDMAReq_TX(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_DMAT); +} + +/** + * @brief Check if DMA Mode is enabled for transmission + * @rmtoll CR3 DMAT LL_USART_IsEnabledDMAReq_TX + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledDMAReq_TX(const USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->CR3, USART_CR3_DMAT) == (USART_CR3_DMAT)); +} + +/** + * @brief Get the data register address used for DMA transfer + * @rmtoll DR DR LL_USART_DMA_GetRegAddr + * @note Address of Data Register is valid for both Transmit and Receive transfers. + * @param USARTx USART Instance + * @retval Address of data register + */ +__STATIC_INLINE uint32_t LL_USART_DMA_GetRegAddr(const USART_TypeDef *USARTx) +{ + /* return address of DR register */ + return ((uint32_t) &(USARTx->DR)); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_Data_Management Data_Management + * @{ + */ + +/** + * @brief Read Receiver Data register (Receive Data value, 8 bits) + * @rmtoll DR DR LL_USART_ReceiveData8 + * @param USARTx USART Instance + * @retval Value between Min_Data=0x00 and Max_Data=0xFF + */ +__STATIC_INLINE uint8_t LL_USART_ReceiveData8(const USART_TypeDef *USARTx) +{ + return (uint8_t)(READ_BIT(USARTx->DR, USART_DR_DR)); +} + +/** + * @brief Read Receiver Data register (Receive Data value, 9 bits) + * @rmtoll DR DR LL_USART_ReceiveData9 + * @param USARTx USART Instance + * @retval Value between Min_Data=0x00 and Max_Data=0x1FF + */ +__STATIC_INLINE uint16_t LL_USART_ReceiveData9(const USART_TypeDef *USARTx) +{ + return (uint16_t)(READ_BIT(USARTx->DR, USART_DR_DR)); +} + +/** + * @brief Write in Transmitter Data Register (Transmit Data value, 8 bits) + * @rmtoll DR DR LL_USART_TransmitData8 + * @param USARTx USART Instance + * @param Value between Min_Data=0x00 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_USART_TransmitData8(USART_TypeDef *USARTx, uint8_t Value) +{ + USARTx->DR = Value; +} + +/** + * @brief Write in Transmitter Data Register (Transmit Data value, 9 bits) + * @rmtoll DR DR LL_USART_TransmitData9 + * @param USARTx USART Instance + * @param Value between Min_Data=0x00 and Max_Data=0x1FF + * @retval None + */ +__STATIC_INLINE void LL_USART_TransmitData9(USART_TypeDef *USARTx, uint16_t Value) +{ + USARTx->DR = Value & 0x1FFU; +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_Execution Execution + * @{ + */ + +/** + * @brief Request Break sending + * @rmtoll CR1 SBK LL_USART_RequestBreakSending + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_RequestBreakSending(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR1, USART_CR1_SBK); +} + +/** + * @brief Put USART in Mute mode + * @rmtoll CR1 RWU LL_USART_RequestEnterMuteMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_RequestEnterMuteMode(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR1, USART_CR1_RWU); +} + +/** + * @brief Put USART in Active mode + * @rmtoll CR1 RWU LL_USART_RequestExitMuteMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_RequestExitMuteMode(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR1, USART_CR1_RWU); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup USART_LL_EF_Init Initialization and de-initialization functions + * @{ + */ +ErrorStatus LL_USART_DeInit(const USART_TypeDef *USARTx); +ErrorStatus LL_USART_Init(USART_TypeDef *USARTx, const LL_USART_InitTypeDef *USART_InitStruct); +void LL_USART_StructInit(LL_USART_InitTypeDef *USART_InitStruct); +ErrorStatus LL_USART_ClockInit(USART_TypeDef *USARTx, const LL_USART_ClockInitTypeDef *USART_ClockInitStruct); +void LL_USART_ClockStructInit(LL_USART_ClockInitTypeDef *USART_ClockInitStruct); +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* USART1 || USART2 || USART3 || USART6 || UART4 || UART5 || UART7 || UART8 || UART9 || UART10 */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F4xx_LL_USART_H */ + diff --git a/cubemx/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_nand.c b/cubemx/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_nand.c new file mode 100644 index 0000000..df22cad --- /dev/null +++ b/cubemx/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_nand.c @@ -0,0 +1,2395 @@ +/** + ****************************************************************************** + * @file stm32f4xx_hal_nand.c + * @author MCD Application Team + * @brief NAND HAL module driver. + * This file provides a generic firmware to drive NAND memories mounted + * as external device. + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + This driver is a generic layered driver which contains a set of APIs used to + control NAND flash memories. It uses the FMC/FSMC layer functions to interface + with NAND devices. This driver is used as follows: + + (+) NAND flash memory configuration sequence using the function HAL_NAND_Init() + with control and timing parameters for both common and attribute spaces. + + (+) Read NAND flash memory maker and device IDs using the function + HAL_NAND_Read_ID(). The read information is stored in the NAND_ID_TypeDef + structure declared by the function caller. + + (+) Access NAND flash memory by read/write operations using the functions + HAL_NAND_Read_Page_8b()/HAL_NAND_Read_SpareArea_8b(), + HAL_NAND_Write_Page_8b()/HAL_NAND_Write_SpareArea_8b(), + HAL_NAND_Read_Page_16b()/HAL_NAND_Read_SpareArea_16b(), + HAL_NAND_Write_Page_16b()/HAL_NAND_Write_SpareArea_16b() + to read/write page(s)/spare area(s). These functions use specific device + information (Block, page size..) predefined by the user in the NAND_DeviceConfigTypeDef + structure. The read/write address information is contained by the Nand_Address_Typedef + structure passed as parameter. + + (+) Perform NAND flash Reset chip operation using the function HAL_NAND_Reset(). + + (+) Perform NAND flash erase block operation using the function HAL_NAND_Erase_Block(). + The erase block address information is contained in the Nand_Address_Typedef + structure passed as parameter. + + (+) Read the NAND flash status operation using the function HAL_NAND_Read_Status(). + + (+) You can also control the NAND device by calling the control APIs HAL_NAND_ECC_Enable()/ + HAL_NAND_ECC_Disable() to respectively enable/disable the ECC code correction + feature or the function HAL_NAND_GetECC() to get the ECC correction code. + + (+) You can monitor the NAND device HAL state by calling the function + HAL_NAND_GetState() + + [..] + (@) This driver is a set of generic APIs which handle standard NAND flash operations. + If a NAND flash device contains different operations and/or implementations, + it should be implemented separately. + + *** Callback registration *** + ============================================= + [..] + The compilation define USE_HAL_NAND_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + + Use Functions HAL_NAND_RegisterCallback() to register a user callback, + it allows to register following callbacks: + (+) MspInitCallback : NAND MspInit. + (+) MspDeInitCallback : NAND MspDeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + Use function HAL_NAND_UnRegisterCallback() to reset a callback to the default + weak (overridden) function. It allows to reset following callbacks: + (+) MspInitCallback : NAND MspInit. + (+) MspDeInitCallback : NAND MspDeInit. + This function) takes as parameters the HAL peripheral handle and the Callback ID. + + By default, after the HAL_NAND_Init and if the state is HAL_NAND_STATE_RESET + all callbacks are reset to the corresponding legacy weak (overridden) functions. + Exception done for MspInit and MspDeInit callbacks that are respectively + reset to the legacy weak (overridden) functions in the HAL_NAND_Init + and HAL_NAND_DeInit only when these callbacks are null (not registered beforehand). + If not, MspInit or MspDeInit are not null, the HAL_NAND_Init and HAL_NAND_DeInit + keep and use the user MspInit/MspDeInit callbacks (registered beforehand) + + Callbacks can be registered/unregistered in READY state only. + Exception done for MspInit/MspDeInit callbacks that can be registered/unregistered + in READY or RESET state, thus registered (user) MspInit/DeInit callbacks can be used + during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using HAL_NAND_RegisterCallback before calling HAL_NAND_DeInit + or HAL_NAND_Init function. + + When The compilation define USE_HAL_NAND_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registering feature is not available + and weak (overridden) callbacks are used. + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal.h" + +#if defined(FMC_Bank3) || defined(FMC_Bank2_3) || defined(FSMC_Bank2_3) + +/** @addtogroup STM32F4xx_HAL_Driver + * @{ + */ + +#ifdef HAL_NAND_MODULE_ENABLED + +/** @defgroup NAND NAND + * @brief NAND HAL module driver + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private Constants ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions ---------------------------------------------------------*/ + +/** @defgroup NAND_Exported_Functions NAND Exported Functions + * @{ + */ + +/** @defgroup NAND_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * + @verbatim + ============================================================================== + ##### NAND Initialization and de-initialization functions ##### + ============================================================================== + [..] + This section provides functions allowing to initialize/de-initialize + the NAND memory + +@endverbatim + * @{ + */ + +/** + * @brief Perform NAND memory Initialization sequence + * @param hnand pointer to a NAND_HandleTypeDef structure that contains + * the configuration information for NAND module. + * @param ComSpace_Timing pointer to Common space timing structure + * @param AttSpace_Timing pointer to Attribute space timing structure + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NAND_Init(NAND_HandleTypeDef *hnand, FMC_NAND_PCC_TimingTypeDef *ComSpace_Timing, + FMC_NAND_PCC_TimingTypeDef *AttSpace_Timing) +{ + /* Check the NAND handle state */ + if (hnand == NULL) + { + return HAL_ERROR; + } + + if (hnand->State == HAL_NAND_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hnand->Lock = HAL_UNLOCKED; + +#if (USE_HAL_NAND_REGISTER_CALLBACKS == 1) + if (hnand->MspInitCallback == NULL) + { + hnand->MspInitCallback = HAL_NAND_MspInit; + } + hnand->ItCallback = HAL_NAND_ITCallback; + + /* Init the low level hardware */ + hnand->MspInitCallback(hnand); +#else + /* Initialize the low level hardware (MSP) */ + HAL_NAND_MspInit(hnand); +#endif /* (USE_HAL_NAND_REGISTER_CALLBACKS) */ + } + + /* Initialize NAND control Interface */ + (void)FMC_NAND_Init(hnand->Instance, &(hnand->Init)); + + /* Initialize NAND common space timing Interface */ + (void)FMC_NAND_CommonSpace_Timing_Init(hnand->Instance, ComSpace_Timing, hnand->Init.NandBank); + + /* Initialize NAND attribute space timing Interface */ + (void)FMC_NAND_AttributeSpace_Timing_Init(hnand->Instance, AttSpace_Timing, hnand->Init.NandBank); + + /* Enable the NAND device */ +#if defined(FMC_Bank2_3) || defined(FSMC_Bank2_3) + __FMC_NAND_ENABLE(hnand->Instance, hnand->Init.NandBank); +#else + __FMC_NAND_ENABLE(hnand->Instance); +#endif /* (FMC_Bank2_3) || (FSMC_Bank2_3) */ + + /* Update the NAND controller state */ + hnand->State = HAL_NAND_STATE_READY; + + return HAL_OK; +} + +/** + * @brief Perform NAND memory De-Initialization sequence + * @param hnand pointer to a NAND_HandleTypeDef structure that contains + * the configuration information for NAND module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NAND_DeInit(NAND_HandleTypeDef *hnand) +{ +#if (USE_HAL_NAND_REGISTER_CALLBACKS == 1) + if (hnand->MspDeInitCallback == NULL) + { + hnand->MspDeInitCallback = HAL_NAND_MspDeInit; + } + + /* DeInit the low level hardware */ + hnand->MspDeInitCallback(hnand); +#else + /* Initialize the low level hardware (MSP) */ + HAL_NAND_MspDeInit(hnand); +#endif /* (USE_HAL_NAND_REGISTER_CALLBACKS) */ + + /* Configure the NAND registers with their reset values */ + (void)FMC_NAND_DeInit(hnand->Instance, hnand->Init.NandBank); + + /* Reset the NAND controller state */ + hnand->State = HAL_NAND_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hnand); + + return HAL_OK; +} + +/** + * @brief NAND MSP Init + * @param hnand pointer to a NAND_HandleTypeDef structure that contains + * the configuration information for NAND module. + * @retval None + */ +__weak void HAL_NAND_MspInit(NAND_HandleTypeDef *hnand) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hnand); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_NAND_MspInit could be implemented in the user file + */ +} + +/** + * @brief NAND MSP DeInit + * @param hnand pointer to a NAND_HandleTypeDef structure that contains + * the configuration information for NAND module. + * @retval None + */ +__weak void HAL_NAND_MspDeInit(NAND_HandleTypeDef *hnand) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hnand); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_NAND_MspDeInit could be implemented in the user file + */ +} + + +/** + * @brief This function handles NAND device interrupt request. + * @param hnand pointer to a NAND_HandleTypeDef structure that contains + * the configuration information for NAND module. + * @retval HAL status + */ +void HAL_NAND_IRQHandler(NAND_HandleTypeDef *hnand) +{ + /* Check NAND interrupt Rising edge flag */ + if (__FMC_NAND_GET_FLAG(hnand->Instance, hnand->Init.NandBank, FMC_FLAG_RISING_EDGE)) + { + /* NAND interrupt callback*/ +#if (USE_HAL_NAND_REGISTER_CALLBACKS == 1) + hnand->ItCallback(hnand); +#else + HAL_NAND_ITCallback(hnand); +#endif /* (USE_HAL_NAND_REGISTER_CALLBACKS) */ + + /* Clear NAND interrupt Rising edge pending bit */ +#if defined(FMC_Bank2_3) || defined(FSMC_Bank2_3) + __FMC_NAND_CLEAR_FLAG(hnand->Instance, hnand->Init.NandBank, FMC_FLAG_RISING_EDGE); +#else + __FMC_NAND_CLEAR_FLAG(hnand->Instance, FMC_FLAG_RISING_EDGE); +#endif /* FMC_Bank2_3 || FSMC_Bank2_3 */ + } + + /* Check NAND interrupt Level flag */ + if (__FMC_NAND_GET_FLAG(hnand->Instance, hnand->Init.NandBank, FMC_FLAG_LEVEL)) + { + /* NAND interrupt callback*/ +#if (USE_HAL_NAND_REGISTER_CALLBACKS == 1) + hnand->ItCallback(hnand); +#else + HAL_NAND_ITCallback(hnand); +#endif /* (USE_HAL_NAND_REGISTER_CALLBACKS) */ + + /* Clear NAND interrupt Level pending bit */ +#if defined(FMC_Bank2_3) || defined(FSMC_Bank2_3) + __FMC_NAND_CLEAR_FLAG(hnand->Instance, hnand->Init.NandBank, FMC_FLAG_LEVEL); +#else + __FMC_NAND_CLEAR_FLAG(hnand->Instance, FMC_FLAG_LEVEL); +#endif /* FMC_Bank2_3 || FSMC_Bank2_3 */ + } + + /* Check NAND interrupt Falling edge flag */ + if (__FMC_NAND_GET_FLAG(hnand->Instance, hnand->Init.NandBank, FMC_FLAG_FALLING_EDGE)) + { + /* NAND interrupt callback*/ +#if (USE_HAL_NAND_REGISTER_CALLBACKS == 1) + hnand->ItCallback(hnand); +#else + HAL_NAND_ITCallback(hnand); +#endif /* (USE_HAL_NAND_REGISTER_CALLBACKS) */ + + /* Clear NAND interrupt Falling edge pending bit */ +#if defined(FMC_Bank2_3) || defined(FSMC_Bank2_3) + __FMC_NAND_CLEAR_FLAG(hnand->Instance, hnand->Init.NandBank, FMC_FLAG_FALLING_EDGE); +#else + __FMC_NAND_CLEAR_FLAG(hnand->Instance, FMC_FLAG_FALLING_EDGE); +#endif /* FMC_Bank2_3 || FSMC_Bank2_3 */ + } + + /* Check NAND interrupt FIFO empty flag */ + if (__FMC_NAND_GET_FLAG(hnand->Instance, hnand->Init.NandBank, FMC_FLAG_FEMPT)) + { + /* NAND interrupt callback*/ +#if (USE_HAL_NAND_REGISTER_CALLBACKS == 1) + hnand->ItCallback(hnand); +#else + HAL_NAND_ITCallback(hnand); +#endif /* (USE_HAL_NAND_REGISTER_CALLBACKS) */ + + /* Clear NAND interrupt FIFO empty pending bit */ +#if defined(FMC_Bank2_3) || defined(FSMC_Bank2_3) + __FMC_NAND_CLEAR_FLAG(hnand->Instance, hnand->Init.NandBank, FMC_FLAG_FEMPT); +#else + __FMC_NAND_CLEAR_FLAG(hnand->Instance, FMC_FLAG_FEMPT); +#endif /* FMC_Bank2_3 || FSMC_Bank2_3 */ + } + +} + +/** + * @brief NAND interrupt feature callback + * @param hnand pointer to a NAND_HandleTypeDef structure that contains + * the configuration information for NAND module. + * @retval None + */ +__weak void HAL_NAND_ITCallback(NAND_HandleTypeDef *hnand) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hnand); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_NAND_ITCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup NAND_Exported_Functions_Group2 Input and Output functions + * @brief Input Output and memory control functions + * + @verbatim + ============================================================================== + ##### NAND Input and Output functions ##### + ============================================================================== + [..] + This section provides functions allowing to use and control the NAND + memory + +@endverbatim + * @{ + */ + +/** + * @brief Read the NAND memory electronic signature + * @param hnand pointer to a NAND_HandleTypeDef structure that contains + * the configuration information for NAND module. + * @param pNAND_ID NAND ID structure + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NAND_Read_ID(NAND_HandleTypeDef *hnand, NAND_IDTypeDef *pNAND_ID) +{ + __IO uint32_t data = 0; + __IO uint32_t data1 = 0; + uint32_t deviceaddress; + + /* Check the NAND controller state */ + if (hnand->State == HAL_NAND_STATE_BUSY) + { + return HAL_BUSY; + } + else if (hnand->State == HAL_NAND_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hnand); + + /* Update the NAND controller state */ + hnand->State = HAL_NAND_STATE_BUSY; + + /* Identify the device address */ +#if defined(FMC_Bank2_3) + if (hnand->Init.NandBank == FMC_NAND_BANK2) + { + deviceaddress = NAND_DEVICE1; + } + else + { + deviceaddress = NAND_DEVICE2; + } +#else + deviceaddress = NAND_DEVICE; +#endif /* FMC_Bank2_3 */ + + /* Send Read ID command sequence */ + *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_READID; + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00; + __DSB(); + + /* Read the electronic signature from NAND flash */ +#ifdef FSMC_PCR2_PWID + if (hnand->Init.MemoryDataWidth == FSMC_NAND_PCC_MEM_BUS_WIDTH_8) +#else /* FMC_PCR2_PWID is defined */ + if (hnand->Init.MemoryDataWidth == FMC_NAND_PCC_MEM_BUS_WIDTH_8) +#endif /* FSMC_PCR2_PWID */ + { + data = *(__IO uint32_t *)deviceaddress; + + /* Return the data read */ + pNAND_ID->Maker_Id = ADDR_1ST_CYCLE(data); + pNAND_ID->Device_Id = ADDR_2ND_CYCLE(data); + pNAND_ID->Third_Id = ADDR_3RD_CYCLE(data); + pNAND_ID->Fourth_Id = ADDR_4TH_CYCLE(data); + } + else + { + data = *(__IO uint32_t *)deviceaddress; + data1 = *((__IO uint32_t *)deviceaddress + 4); + + /* Return the data read */ + pNAND_ID->Maker_Id = ADDR_1ST_CYCLE(data); + pNAND_ID->Device_Id = ADDR_3RD_CYCLE(data); + pNAND_ID->Third_Id = ADDR_1ST_CYCLE(data1); + pNAND_ID->Fourth_Id = ADDR_3RD_CYCLE(data1); + } + + /* Update the NAND controller state */ + hnand->State = HAL_NAND_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hnand); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief NAND memory reset + * @param hnand pointer to a NAND_HandleTypeDef structure that contains + * the configuration information for NAND module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NAND_Reset(NAND_HandleTypeDef *hnand) +{ + uint32_t deviceaddress; + + /* Check the NAND controller state */ + if (hnand->State == HAL_NAND_STATE_BUSY) + { + return HAL_BUSY; + } + else if (hnand->State == HAL_NAND_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hnand); + + /* Update the NAND controller state */ + hnand->State = HAL_NAND_STATE_BUSY; + + /* Identify the device address */ +#if defined(FMC_Bank2_3) + if (hnand->Init.NandBank == FMC_NAND_BANK2) + { + deviceaddress = NAND_DEVICE1; + } + else + { + deviceaddress = NAND_DEVICE2; + } +#else + deviceaddress = NAND_DEVICE; +#endif /* FMC_Bank2_3 */ + + /* Send NAND reset command */ + *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = 0xFF; + + /* Update the NAND controller state */ + hnand->State = HAL_NAND_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hnand); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; + +} + +/** + * @brief Configure the device: Enter the physical parameters of the device + * @param hnand pointer to a NAND_HandleTypeDef structure that contains + * the configuration information for NAND module. + * @param pDeviceConfig pointer to NAND_DeviceConfigTypeDef structure + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NAND_ConfigDevice(NAND_HandleTypeDef *hnand, const NAND_DeviceConfigTypeDef *pDeviceConfig) +{ + hnand->Config.PageSize = pDeviceConfig->PageSize; + hnand->Config.SpareAreaSize = pDeviceConfig->SpareAreaSize; + hnand->Config.BlockSize = pDeviceConfig->BlockSize; + hnand->Config.BlockNbr = pDeviceConfig->BlockNbr; + hnand->Config.PlaneSize = pDeviceConfig->PlaneSize; + hnand->Config.PlaneNbr = pDeviceConfig->PlaneNbr; + hnand->Config.ExtraCommandEnable = pDeviceConfig->ExtraCommandEnable; + + return HAL_OK; +} + +/** + * @brief Read Page(s) from NAND memory block (8-bits addressing) + * @param hnand pointer to a NAND_HandleTypeDef structure that contains + * the configuration information for NAND module. + * @param pAddress pointer to NAND address structure + * @param pBuffer pointer to destination read buffer + * @param NumPageToRead number of pages to read from block + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NAND_Read_Page_8b(NAND_HandleTypeDef *hnand, const NAND_AddressTypeDef *pAddress, + uint8_t *pBuffer, uint32_t NumPageToRead) +{ + uint32_t index; + uint32_t tickstart; + uint32_t deviceaddress; + uint32_t numpagesread = 0U; + uint32_t nandaddress; + uint32_t nbpages = NumPageToRead; + uint8_t *buff = pBuffer; + + /* Check the NAND controller state */ + if (hnand->State == HAL_NAND_STATE_BUSY) + { + return HAL_BUSY; + } + else if (hnand->State == HAL_NAND_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hnand); + + /* Update the NAND controller state */ + hnand->State = HAL_NAND_STATE_BUSY; + + /* Identify the device address */ +#if defined(FMC_Bank2_3) + if (hnand->Init.NandBank == FMC_NAND_BANK2) + { + deviceaddress = NAND_DEVICE1; + } + else + { + deviceaddress = NAND_DEVICE2; + } +#else + deviceaddress = NAND_DEVICE; +#endif /* FMC_Bank2_3 */ + + /* NAND raw address calculation */ + nandaddress = ARRAY_ADDRESS(pAddress, hnand); + + /* Page(s) read loop */ + while ((nbpages != 0U) && (nandaddress < ((hnand->Config.BlockSize) * (hnand->Config.BlockNbr)))) + { + /* Send read page command sequence */ + *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_A; + __DSB(); + + /* Cards with page size <= 512 bytes */ + if ((hnand->Config.PageSize) <= 512U) + { + if (((hnand->Config.BlockSize) * (hnand->Config.BlockNbr)) <= 65535U) + { + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U; + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress); + __DSB(); + } + else /* ((hnand->Config.BlockSize)*(hnand->Config.BlockNbr)) > 65535 */ + { + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U; + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandaddress); + __DSB(); + } + } + else /* (hnand->Config.PageSize) > 512 */ + { + if (((hnand->Config.BlockSize) * (hnand->Config.BlockNbr)) <= 65535U) + { + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U; + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U; + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress); + __DSB(); + } + else /* ((hnand->Config.BlockSize)*(hnand->Config.BlockNbr)) > 65535 */ + { + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U; + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U; + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandaddress); + __DSB(); + } + } + + *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_TRUE1; + __DSB(); + + + if (hnand->Config.ExtraCommandEnable == ENABLE) + { + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Read status until NAND is ready */ + while (HAL_NAND_Read_Status(hnand) != NAND_READY) + { + if ((HAL_GetTick() - tickstart) > NAND_WRITE_TIMEOUT) + { + /* Update the NAND controller state */ + hnand->State = HAL_NAND_STATE_ERROR; + + /* Process unlocked */ + __HAL_UNLOCK(hnand); + + return HAL_TIMEOUT; + } + } + + /* Go back to read mode */ + *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = ((uint8_t)0x00); + __DSB(); + } + + /* Get Data into Buffer */ + for (index = 0U; index < hnand->Config.PageSize; index++) + { + *buff = *(__IO uint8_t *)deviceaddress; + buff++; + } + + /* Increment read pages number */ + numpagesread++; + + /* Decrement pages to read */ + nbpages--; + + /* Increment the NAND address */ + nandaddress = (uint32_t)(nandaddress + 1U); + } + + /* Update the NAND controller state */ + hnand->State = HAL_NAND_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hnand); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Read Page(s) from NAND memory block (16-bits addressing) + * @param hnand pointer to a NAND_HandleTypeDef structure that contains + * the configuration information for NAND module. + * @param pAddress pointer to NAND address structure + * @param pBuffer pointer to destination read buffer. pBuffer should be 16bits aligned + * @param NumPageToRead number of pages to read from block + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NAND_Read_Page_16b(NAND_HandleTypeDef *hnand, const NAND_AddressTypeDef *pAddress, + uint16_t *pBuffer, uint32_t NumPageToRead) +{ + uint32_t index; + uint32_t tickstart; + uint32_t deviceaddress; + uint32_t numpagesread = 0U; + uint32_t nandaddress; + uint32_t nbpages = NumPageToRead; + uint16_t *buff = pBuffer; + + /* Check the NAND controller state */ + if (hnand->State == HAL_NAND_STATE_BUSY) + { + return HAL_BUSY; + } + else if (hnand->State == HAL_NAND_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hnand); + + /* Update the NAND controller state */ + hnand->State = HAL_NAND_STATE_BUSY; + + /* Identify the device address */ +#if defined(FMC_Bank2_3) + if (hnand->Init.NandBank == FMC_NAND_BANK2) + { + deviceaddress = NAND_DEVICE1; + } + else + { + deviceaddress = NAND_DEVICE2; + } +#else + deviceaddress = NAND_DEVICE; +#endif /* FMC_Bank2_3 */ + + /* NAND raw address calculation */ + nandaddress = ARRAY_ADDRESS(pAddress, hnand); + + /* Page(s) read loop */ + while ((nbpages != 0U) && (nandaddress < ((hnand->Config.BlockSize) * (hnand->Config.BlockNbr)))) + { + /* Send read page command sequence */ + *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_A; + __DSB(); + + /* Cards with page size <= 512 bytes */ + if ((hnand->Config.PageSize) <= 512U) + { + if (((hnand->Config.BlockSize) * (hnand->Config.BlockNbr)) <= 65535U) + { + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U; + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress); + __DSB(); + } + else /* ((hnand->Config.BlockSize)*(hnand->Config.BlockNbr)) > 65535 */ + { + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U; + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandaddress); + __DSB(); + } + } + else /* (hnand->Config.PageSize) > 512 */ + { + if (((hnand->Config.BlockSize) * (hnand->Config.BlockNbr)) <= 65535U) + { + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U; + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U; + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress); + __DSB(); + } + else /* ((hnand->Config.BlockSize)*(hnand->Config.BlockNbr)) > 65535 */ + { + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U; + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U; + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandaddress); + __DSB(); + } + } + + *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_TRUE1; + __DSB(); + + if (hnand->Config.ExtraCommandEnable == ENABLE) + { + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Read status until NAND is ready */ + while (HAL_NAND_Read_Status(hnand) != NAND_READY) + { + if ((HAL_GetTick() - tickstart) > NAND_WRITE_TIMEOUT) + { + /* Update the NAND controller state */ + hnand->State = HAL_NAND_STATE_ERROR; + + /* Process unlocked */ + __HAL_UNLOCK(hnand); + + return HAL_TIMEOUT; + } + } + + /* Go back to read mode */ + *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = ((uint8_t)0x00); + __DSB(); + } + + /* Calculate PageSize */ +#if defined(FSMC_PCR2_PWID) + if (hnand->Init.MemoryDataWidth == FSMC_NAND_PCC_MEM_BUS_WIDTH_8) +#else + if (hnand->Init.MemoryDataWidth == FMC_NAND_PCC_MEM_BUS_WIDTH_8) +#endif /* FSMC_PCR2_PWID */ + { + hnand->Config.PageSize = hnand->Config.PageSize / 2U; + } + else + { + /* Do nothing */ + /* Keep the same PageSize for FMC_NAND_MEM_BUS_WIDTH_16*/ + } + + /* Get Data into Buffer */ + for (index = 0U; index < hnand->Config.PageSize; index++) + { + *buff = *(__IO uint16_t *)deviceaddress; + buff++; + } + + /* Increment read pages number */ + numpagesread++; + + /* Decrement pages to read */ + nbpages--; + + /* Increment the NAND address */ + nandaddress = (uint32_t)(nandaddress + 1U); + } + + /* Update the NAND controller state */ + hnand->State = HAL_NAND_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hnand); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Write Page(s) to NAND memory block (8-bits addressing) + * @param hnand pointer to a NAND_HandleTypeDef structure that contains + * the configuration information for NAND module. + * @param pAddress pointer to NAND address structure + * @param pBuffer pointer to source buffer to write + * @param NumPageToWrite number of pages to write to block + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NAND_Write_Page_8b(NAND_HandleTypeDef *hnand, const NAND_AddressTypeDef *pAddress, + const uint8_t *pBuffer, uint32_t NumPageToWrite) +{ + uint32_t index; + uint32_t tickstart; + uint32_t deviceaddress; + uint32_t numpageswritten = 0U; + uint32_t nandaddress; + uint32_t nbpages = NumPageToWrite; + const uint8_t *buff = pBuffer; + + /* Check the NAND controller state */ + if (hnand->State == HAL_NAND_STATE_BUSY) + { + return HAL_BUSY; + } + else if (hnand->State == HAL_NAND_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hnand); + + /* Update the NAND controller state */ + hnand->State = HAL_NAND_STATE_BUSY; + + /* Identify the device address */ +#if defined(FMC_Bank2_3) + if (hnand->Init.NandBank == FMC_NAND_BANK2) + { + deviceaddress = NAND_DEVICE1; + } + else + { + deviceaddress = NAND_DEVICE2; + } +#else + deviceaddress = NAND_DEVICE; +#endif /* FMC_Bank2_3 */ + + /* NAND raw address calculation */ + nandaddress = ARRAY_ADDRESS(pAddress, hnand); + + /* Page(s) write loop */ + while ((nbpages != 0U) && (nandaddress < ((hnand->Config.BlockSize) * (hnand->Config.BlockNbr)))) + { + /* Send write page command sequence */ + *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_A; + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_WRITE0; + __DSB(); + + /* Cards with page size <= 512 bytes */ + if ((hnand->Config.PageSize) <= 512U) + { + if (((hnand->Config.BlockSize) * (hnand->Config.BlockNbr)) <= 65535U) + { + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U; + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress); + __DSB(); + } + else /* ((hnand->Config.BlockSize)*(hnand->Config.BlockNbr)) > 65535 */ + { + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U; + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandaddress); + __DSB(); + } + } + else /* (hnand->Config.PageSize) > 512 */ + { + if (((hnand->Config.BlockSize) * (hnand->Config.BlockNbr)) <= 65535U) + { + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U; + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U; + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress); + __DSB(); + } + else /* ((hnand->Config.BlockSize)*(hnand->Config.BlockNbr)) > 65535 */ + { + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U; + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U; + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandaddress); + __DSB(); + } + } + + /* Write data to memory */ + for (index = 0U; index < hnand->Config.PageSize; index++) + { + *(__IO uint8_t *)deviceaddress = *buff; + buff++; + __DSB(); + } + + *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_WRITE_TRUE1; + __DSB(); + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Read status until NAND is ready */ + while (HAL_NAND_Read_Status(hnand) != NAND_READY) + { + if ((HAL_GetTick() - tickstart) > NAND_WRITE_TIMEOUT) + { + /* Update the NAND controller state */ + hnand->State = HAL_NAND_STATE_ERROR; + + /* Process unlocked */ + __HAL_UNLOCK(hnand); + + return HAL_TIMEOUT; + } + } + + /* Increment written pages number */ + numpageswritten++; + + /* Decrement pages to write */ + nbpages--; + + /* Increment the NAND address */ + nandaddress = (uint32_t)(nandaddress + 1U); + } + + /* Update the NAND controller state */ + hnand->State = HAL_NAND_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hnand); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Write Page(s) to NAND memory block (16-bits addressing) + * @param hnand pointer to a NAND_HandleTypeDef structure that contains + * the configuration information for NAND module. + * @param pAddress pointer to NAND address structure + * @param pBuffer pointer to source buffer to write. pBuffer should be 16bits aligned + * @param NumPageToWrite number of pages to write to block + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NAND_Write_Page_16b(NAND_HandleTypeDef *hnand, const NAND_AddressTypeDef *pAddress, + const uint16_t *pBuffer, uint32_t NumPageToWrite) +{ + uint32_t index; + uint32_t tickstart; + uint32_t deviceaddress; + uint32_t numpageswritten = 0U; + uint32_t nandaddress; + uint32_t nbpages = NumPageToWrite; + const uint16_t *buff = pBuffer; + + /* Check the NAND controller state */ + if (hnand->State == HAL_NAND_STATE_BUSY) + { + return HAL_BUSY; + } + else if (hnand->State == HAL_NAND_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hnand); + + /* Update the NAND controller state */ + hnand->State = HAL_NAND_STATE_BUSY; + + /* Identify the device address */ +#if defined(FMC_Bank2_3) + if (hnand->Init.NandBank == FMC_NAND_BANK2) + { + deviceaddress = NAND_DEVICE1; + } + else + { + deviceaddress = NAND_DEVICE2; + } +#else + deviceaddress = NAND_DEVICE; +#endif /* FMC_Bank2_3 */ + + /* NAND raw address calculation */ + nandaddress = ARRAY_ADDRESS(pAddress, hnand); + + /* Page(s) write loop */ + while ((nbpages != 0U) && (nandaddress < ((hnand->Config.BlockSize) * (hnand->Config.BlockNbr)))) + { + /* Send write page command sequence */ + *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_A; + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_WRITE0; + __DSB(); + + /* Cards with page size <= 512 bytes */ + if ((hnand->Config.PageSize) <= 512U) + { + if (((hnand->Config.BlockSize) * (hnand->Config.BlockNbr)) <= 65535U) + { + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U; + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress); + __DSB(); + } + else /* ((hnand->Config.BlockSize)*(hnand->Config.BlockNbr)) > 65535 */ + { + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U; + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandaddress); + __DSB(); + } + } + else /* (hnand->Config.PageSize) > 512 */ + { + if (((hnand->Config.BlockSize) * (hnand->Config.BlockNbr)) <= 65535U) + { + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U; + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U; + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress); + __DSB(); + } + else /* ((hnand->Config.BlockSize)*(hnand->Config.BlockNbr)) > 65535 */ + { + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U; + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U; + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandaddress); + __DSB(); + } + } + + /* Calculate PageSize */ +#if defined(FSMC_PCR2_PWID) + if (hnand->Init.MemoryDataWidth == FSMC_NAND_PCC_MEM_BUS_WIDTH_8) +#else + if (hnand->Init.MemoryDataWidth == FMC_NAND_PCC_MEM_BUS_WIDTH_8) +#endif /* FSMC_PCR2_PWID */ + { + hnand->Config.PageSize = hnand->Config.PageSize / 2U; + } + else + { + /* Do nothing */ + /* Keep the same PageSize for FMC_NAND_MEM_BUS_WIDTH_16*/ + } + + /* Write data to memory */ + for (index = 0U; index < hnand->Config.PageSize; index++) + { + *(__IO uint16_t *)deviceaddress = *buff; + buff++; + __DSB(); + } + + *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_WRITE_TRUE1; + __DSB(); + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Read status until NAND is ready */ + while (HAL_NAND_Read_Status(hnand) != NAND_READY) + { + if ((HAL_GetTick() - tickstart) > NAND_WRITE_TIMEOUT) + { + /* Update the NAND controller state */ + hnand->State = HAL_NAND_STATE_ERROR; + + /* Process unlocked */ + __HAL_UNLOCK(hnand); + + return HAL_TIMEOUT; + } + } + + /* Increment written pages number */ + numpageswritten++; + + /* Decrement pages to write */ + nbpages--; + + /* Increment the NAND address */ + nandaddress = (uint32_t)(nandaddress + 1U); + } + + /* Update the NAND controller state */ + hnand->State = HAL_NAND_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hnand); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Read Spare area(s) from NAND memory (8-bits addressing) + * @param hnand pointer to a NAND_HandleTypeDef structure that contains + * the configuration information for NAND module. + * @param pAddress pointer to NAND address structure + * @param pBuffer pointer to source buffer to write + * @param NumSpareAreaToRead Number of spare area to read + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NAND_Read_SpareArea_8b(NAND_HandleTypeDef *hnand, const NAND_AddressTypeDef *pAddress, + uint8_t *pBuffer, uint32_t NumSpareAreaToRead) +{ + uint32_t index; + uint32_t tickstart; + uint32_t deviceaddress; + uint32_t numsparearearead = 0U; + uint32_t nandaddress; + uint32_t columnaddress; + uint32_t nbspare = NumSpareAreaToRead; + uint8_t *buff = pBuffer; + + /* Check the NAND controller state */ + if (hnand->State == HAL_NAND_STATE_BUSY) + { + return HAL_BUSY; + } + else if (hnand->State == HAL_NAND_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hnand); + + /* Update the NAND controller state */ + hnand->State = HAL_NAND_STATE_BUSY; + + /* Identify the device address */ +#if defined(FMC_Bank2_3) + if (hnand->Init.NandBank == FMC_NAND_BANK2) + { + deviceaddress = NAND_DEVICE1; + } + else + { + deviceaddress = NAND_DEVICE2; + } +#else + deviceaddress = NAND_DEVICE; +#endif /* FMC_Bank2_3 */ + + /* NAND raw address calculation */ + nandaddress = ARRAY_ADDRESS(pAddress, hnand); + + /* Column in page address */ + columnaddress = COLUMN_ADDRESS(hnand); + + /* Spare area(s) read loop */ + while ((nbspare != 0U) && (nandaddress < ((hnand->Config.BlockSize) * (hnand->Config.BlockNbr)))) + { + /* Cards with page size <= 512 bytes */ + if ((hnand->Config.PageSize) <= 512U) + { + /* Send read spare area command sequence */ + *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_C; + __DSB(); + + if (((hnand->Config.BlockSize) * (hnand->Config.BlockNbr)) <= 65535U) + { + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U; + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress); + __DSB(); + } + else /* ((hnand->Config.BlockSize)*(hnand->Config.BlockNbr)) > 65535 */ + { + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U; + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandaddress); + __DSB(); + } + } + else /* (hnand->Config.PageSize) > 512 */ + { + /* Send read spare area command sequence */ + *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_A; + __DSB(); + + if (((hnand->Config.BlockSize) * (hnand->Config.BlockNbr)) <= 65535U) + { + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = COLUMN_1ST_CYCLE(columnaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = COLUMN_2ND_CYCLE(columnaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress); + __DSB(); + } + else /* ((hnand->Config.BlockSize)*(hnand->Config.BlockNbr)) > 65535 */ + { + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = COLUMN_1ST_CYCLE(columnaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = COLUMN_2ND_CYCLE(columnaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandaddress); + __DSB(); + } + } + + *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_TRUE1; + __DSB(); + + if (hnand->Config.ExtraCommandEnable == ENABLE) + { + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Read status until NAND is ready */ + while (HAL_NAND_Read_Status(hnand) != NAND_READY) + { + if ((HAL_GetTick() - tickstart) > NAND_WRITE_TIMEOUT) + { + /* Update the NAND controller state */ + hnand->State = HAL_NAND_STATE_ERROR; + + /* Process unlocked */ + __HAL_UNLOCK(hnand); + + return HAL_TIMEOUT; + } + } + + /* Go back to read mode */ + *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = ((uint8_t)0x00); + __DSB(); + } + + /* Get Data into Buffer */ + for (index = 0U; index < hnand->Config.SpareAreaSize; index++) + { + *buff = *(__IO uint8_t *)deviceaddress; + buff++; + } + + /* Increment read spare areas number */ + numsparearearead++; + + /* Decrement spare areas to read */ + nbspare--; + + /* Increment the NAND address */ + nandaddress = (uint32_t)(nandaddress + 1U); + } + + /* Update the NAND controller state */ + hnand->State = HAL_NAND_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hnand); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Read Spare area(s) from NAND memory (16-bits addressing) + * @param hnand pointer to a NAND_HandleTypeDef structure that contains + * the configuration information for NAND module. + * @param pAddress pointer to NAND address structure + * @param pBuffer pointer to source buffer to write. pBuffer should be 16bits aligned. + * @param NumSpareAreaToRead Number of spare area to read + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NAND_Read_SpareArea_16b(NAND_HandleTypeDef *hnand, const NAND_AddressTypeDef *pAddress, + uint16_t *pBuffer, uint32_t NumSpareAreaToRead) +{ + uint32_t index; + uint32_t tickstart; + uint32_t deviceaddress; + uint32_t numsparearearead = 0U; + uint32_t nandaddress; + uint32_t columnaddress; + uint32_t nbspare = NumSpareAreaToRead; + uint16_t *buff = pBuffer; + + /* Check the NAND controller state */ + if (hnand->State == HAL_NAND_STATE_BUSY) + { + return HAL_BUSY; + } + else if (hnand->State == HAL_NAND_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hnand); + + /* Update the NAND controller state */ + hnand->State = HAL_NAND_STATE_BUSY; + + /* Identify the device address */ +#if defined(FMC_Bank2_3) + if (hnand->Init.NandBank == FMC_NAND_BANK2) + { + deviceaddress = NAND_DEVICE1; + } + else + { + deviceaddress = NAND_DEVICE2; + } +#else + deviceaddress = NAND_DEVICE; +#endif /* FMC_Bank2_3 */ + + /* NAND raw address calculation */ + nandaddress = ARRAY_ADDRESS(pAddress, hnand); + + /* Column in page address */ + columnaddress = (uint32_t)(COLUMN_ADDRESS(hnand)); + + /* Spare area(s) read loop */ + while ((nbspare != 0U) && (nandaddress < ((hnand->Config.BlockSize) * (hnand->Config.BlockNbr)))) + { + /* Cards with page size <= 512 bytes */ + if ((hnand->Config.PageSize) <= 512U) + { + /* Send read spare area command sequence */ + *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_C; + __DSB(); + + if (((hnand->Config.BlockSize) * (hnand->Config.BlockNbr)) <= 65535U) + { + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U; + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress); + __DSB(); + } + else /* ((hnand->Config.BlockSize)*(hnand->Config.BlockNbr)) > 65535 */ + { + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U; + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandaddress); + __DSB(); + } + } + else /* (hnand->Config.PageSize) > 512 */ + { + /* Send read spare area command sequence */ + *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_A; + __DSB(); + + if (((hnand->Config.BlockSize) * (hnand->Config.BlockNbr)) <= 65535U) + { + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = COLUMN_1ST_CYCLE(columnaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = COLUMN_2ND_CYCLE(columnaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress); + __DSB(); + } + else /* ((hnand->Config.BlockSize)*(hnand->Config.BlockNbr)) > 65535 */ + { + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = COLUMN_1ST_CYCLE(columnaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = COLUMN_2ND_CYCLE(columnaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandaddress); + __DSB(); + } + } + + *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_TRUE1; + __DSB(); + + if (hnand->Config.ExtraCommandEnable == ENABLE) + { + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Read status until NAND is ready */ + while (HAL_NAND_Read_Status(hnand) != NAND_READY) + { + if ((HAL_GetTick() - tickstart) > NAND_WRITE_TIMEOUT) + { + /* Update the NAND controller state */ + hnand->State = HAL_NAND_STATE_ERROR; + + /* Process unlocked */ + __HAL_UNLOCK(hnand); + + return HAL_TIMEOUT; + } + } + + /* Go back to read mode */ + *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = ((uint8_t)0x00); + __DSB(); + } + + /* Get Data into Buffer */ + for (index = 0U; index < hnand->Config.SpareAreaSize; index++) + { + *buff = *(__IO uint16_t *)deviceaddress; + buff++; + } + + /* Increment read spare areas number */ + numsparearearead++; + + /* Decrement spare areas to read */ + nbspare--; + + /* Increment the NAND address */ + nandaddress = (uint32_t)(nandaddress + 1U); + } + + /* Update the NAND controller state */ + hnand->State = HAL_NAND_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hnand); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Write Spare area(s) to NAND memory (8-bits addressing) + * @param hnand pointer to a NAND_HandleTypeDef structure that contains + * the configuration information for NAND module. + * @param pAddress pointer to NAND address structure + * @param pBuffer pointer to source buffer to write + * @param NumSpareAreaTowrite number of spare areas to write to block + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NAND_Write_SpareArea_8b(NAND_HandleTypeDef *hnand, const NAND_AddressTypeDef *pAddress, + const uint8_t *pBuffer, uint32_t NumSpareAreaTowrite) +{ + uint32_t index; + uint32_t tickstart; + uint32_t deviceaddress; + uint32_t numspareareawritten = 0U; + uint32_t nandaddress; + uint32_t columnaddress; + uint32_t nbspare = NumSpareAreaTowrite; + const uint8_t *buff = pBuffer; + + /* Check the NAND controller state */ + if (hnand->State == HAL_NAND_STATE_BUSY) + { + return HAL_BUSY; + } + else if (hnand->State == HAL_NAND_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hnand); + + /* Update the NAND controller state */ + hnand->State = HAL_NAND_STATE_BUSY; + + /* Identify the device address */ +#if defined(FMC_Bank2_3) + if (hnand->Init.NandBank == FMC_NAND_BANK2) + { + deviceaddress = NAND_DEVICE1; + } + else + { + deviceaddress = NAND_DEVICE2; + } +#else + deviceaddress = NAND_DEVICE; +#endif /* FMC_Bank2_3 */ + + /* Page address calculation */ + nandaddress = ARRAY_ADDRESS(pAddress, hnand); + + /* Column in page address */ + columnaddress = COLUMN_ADDRESS(hnand); + + /* Spare area(s) write loop */ + while ((nbspare != 0U) && (nandaddress < ((hnand->Config.BlockSize) * (hnand->Config.BlockNbr)))) + { + /* Cards with page size <= 512 bytes */ + if ((hnand->Config.PageSize) <= 512U) + { + /* Send write Spare area command sequence */ + *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_C; + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_WRITE0; + __DSB(); + + if (((hnand->Config.BlockSize) * (hnand->Config.BlockNbr)) <= 65535U) + { + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U; + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress); + __DSB(); + } + else /* ((hnand->Config.BlockSize)*(hnand->Config.BlockNbr)) > 65535 */ + { + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U; + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandaddress); + __DSB(); + } + } + else /* (hnand->Config.PageSize) > 512 */ + { + /* Send write Spare area command sequence */ + *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_A; + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_WRITE0; + __DSB(); + + if (((hnand->Config.BlockSize) * (hnand->Config.BlockNbr)) <= 65535U) + { + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = COLUMN_1ST_CYCLE(columnaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = COLUMN_2ND_CYCLE(columnaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress); + __DSB(); + } + else /* ((hnand->Config.BlockSize)*(hnand->Config.BlockNbr)) > 65535 */ + { + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = COLUMN_1ST_CYCLE(columnaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = COLUMN_2ND_CYCLE(columnaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandaddress); + __DSB(); + } + } + + /* Write data to memory */ + for (index = 0U; index < hnand->Config.SpareAreaSize; index++) + { + *(__IO uint8_t *)deviceaddress = *buff; + buff++; + __DSB(); + } + + *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_WRITE_TRUE1; + __DSB(); + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Read status until NAND is ready */ + while (HAL_NAND_Read_Status(hnand) != NAND_READY) + { + if ((HAL_GetTick() - tickstart) > NAND_WRITE_TIMEOUT) + { + /* Update the NAND controller state */ + hnand->State = HAL_NAND_STATE_ERROR; + + /* Process unlocked */ + __HAL_UNLOCK(hnand); + + return HAL_TIMEOUT; + } + } + + /* Increment written spare areas number */ + numspareareawritten++; + + /* Decrement spare areas to write */ + nbspare--; + + /* Increment the NAND address */ + nandaddress = (uint32_t)(nandaddress + 1U); + } + + /* Update the NAND controller state */ + hnand->State = HAL_NAND_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hnand); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Write Spare area(s) to NAND memory (16-bits addressing) + * @param hnand pointer to a NAND_HandleTypeDef structure that contains + * the configuration information for NAND module. + * @param pAddress pointer to NAND address structure + * @param pBuffer pointer to source buffer to write. pBuffer should be 16bits aligned. + * @param NumSpareAreaTowrite number of spare areas to write to block + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NAND_Write_SpareArea_16b(NAND_HandleTypeDef *hnand, const NAND_AddressTypeDef *pAddress, + const uint16_t *pBuffer, uint32_t NumSpareAreaTowrite) +{ + uint32_t index; + uint32_t tickstart; + uint32_t deviceaddress; + uint32_t numspareareawritten = 0U; + uint32_t nandaddress; + uint32_t columnaddress; + uint32_t nbspare = NumSpareAreaTowrite; + const uint16_t *buff = pBuffer; + + /* Check the NAND controller state */ + if (hnand->State == HAL_NAND_STATE_BUSY) + { + return HAL_BUSY; + } + else if (hnand->State == HAL_NAND_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hnand); + + /* Update the NAND controller state */ + hnand->State = HAL_NAND_STATE_BUSY; + + /* Identify the device address */ +#if defined(FMC_Bank2_3) + if (hnand->Init.NandBank == FMC_NAND_BANK2) + { + deviceaddress = NAND_DEVICE1; + } + else + { + deviceaddress = NAND_DEVICE2; + } +#else + deviceaddress = NAND_DEVICE; +#endif /* FMC_Bank2_3 */ + + /* NAND raw address calculation */ + nandaddress = ARRAY_ADDRESS(pAddress, hnand); + + /* Column in page address */ + columnaddress = (uint32_t)(COLUMN_ADDRESS(hnand)); + + /* Spare area(s) write loop */ + while ((nbspare != 0U) && (nandaddress < ((hnand->Config.BlockSize) * (hnand->Config.BlockNbr)))) + { + /* Cards with page size <= 512 bytes */ + if ((hnand->Config.PageSize) <= 512U) + { + /* Send write Spare area command sequence */ + *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_C; + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_WRITE0; + __DSB(); + + if (((hnand->Config.BlockSize) * (hnand->Config.BlockNbr)) <= 65535U) + { + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U; + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress); + __DSB(); + } + else /* ((hnand->Config.BlockSize)*(hnand->Config.BlockNbr)) > 65535 */ + { + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U; + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandaddress); + __DSB(); + } + } + else /* (hnand->Config.PageSize) > 512 */ + { + /* Send write Spare area command sequence */ + *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_A; + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_WRITE0; + __DSB(); + + if (((hnand->Config.BlockSize) * (hnand->Config.BlockNbr)) <= 65535U) + { + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = COLUMN_1ST_CYCLE(columnaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = COLUMN_2ND_CYCLE(columnaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress); + __DSB(); + } + else /* ((hnand->Config.BlockSize)*(hnand->Config.BlockNbr)) > 65535 */ + { + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = COLUMN_1ST_CYCLE(columnaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = COLUMN_2ND_CYCLE(columnaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandaddress); + __DSB(); + } + } + + /* Write data to memory */ + for (index = 0U; index < hnand->Config.SpareAreaSize; index++) + { + *(__IO uint16_t *)deviceaddress = *buff; + buff++; + __DSB(); + } + + *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_WRITE_TRUE1; + __DSB(); + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Read status until NAND is ready */ + while (HAL_NAND_Read_Status(hnand) != NAND_READY) + { + if ((HAL_GetTick() - tickstart) > NAND_WRITE_TIMEOUT) + { + /* Update the NAND controller state */ + hnand->State = HAL_NAND_STATE_ERROR; + + /* Process unlocked */ + __HAL_UNLOCK(hnand); + + return HAL_TIMEOUT; + } + } + + /* Increment written spare areas number */ + numspareareawritten++; + + /* Decrement spare areas to write */ + nbspare--; + + /* Increment the NAND address */ + nandaddress = (uint32_t)(nandaddress + 1U); + } + + /* Update the NAND controller state */ + hnand->State = HAL_NAND_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hnand); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief NAND memory Block erase + * @param hnand pointer to a NAND_HandleTypeDef structure that contains + * the configuration information for NAND module. + * @param pAddress pointer to NAND address structure + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NAND_Erase_Block(NAND_HandleTypeDef *hnand, const NAND_AddressTypeDef *pAddress) +{ + uint32_t deviceaddress; + + /* Check the NAND controller state */ + if (hnand->State == HAL_NAND_STATE_BUSY) + { + return HAL_BUSY; + } + else if (hnand->State == HAL_NAND_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hnand); + + /* Update the NAND controller state */ + hnand->State = HAL_NAND_STATE_BUSY; + + /* Identify the device address */ +#if defined(FMC_Bank2_3) + if (hnand->Init.NandBank == FMC_NAND_BANK2) + { + deviceaddress = NAND_DEVICE1; + } + else + { + deviceaddress = NAND_DEVICE2; + } +#else + deviceaddress = NAND_DEVICE; +#endif /* FMC_Bank2_3 */ + + /* Send Erase block command sequence */ + *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_ERASE0; + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(ARRAY_ADDRESS(pAddress, hnand)); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(ARRAY_ADDRESS(pAddress, hnand)); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(ARRAY_ADDRESS(pAddress, hnand)); + __DSB(); + + *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_ERASE1; + __DSB(); + + /* Update the NAND controller state */ + hnand->State = HAL_NAND_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hnand); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Increment the NAND memory address + * @param hnand pointer to a NAND_HandleTypeDef structure that contains + * the configuration information for NAND module. + * @param pAddress pointer to NAND address structure + * @retval The new status of the increment address operation. It can be: + * - NAND_VALID_ADDRESS: When the new address is valid address + * - NAND_INVALID_ADDRESS: When the new address is invalid address + */ +uint32_t HAL_NAND_Address_Inc(const NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress) +{ + uint32_t status = NAND_VALID_ADDRESS; + + /* Increment page address */ + pAddress->Page++; + + /* Check NAND address is valid */ + if (pAddress->Page == hnand->Config.BlockSize) + { + pAddress->Page = 0; + pAddress->Block++; + + if (pAddress->Block == hnand->Config.PlaneSize) + { + pAddress->Block = 0; + pAddress->Plane++; + + if (pAddress->Plane == (hnand->Config.PlaneNbr)) + { + status = NAND_INVALID_ADDRESS; + } + } + } + + return (status); +} + +#if (USE_HAL_NAND_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User NAND Callback + * To be used to override the weak predefined callback + * @param hnand : NAND handle + * @param CallbackId : ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_NAND_MSP_INIT_CB_ID NAND MspInit callback ID + * @arg @ref HAL_NAND_MSP_DEINIT_CB_ID NAND MspDeInit callback ID + * @arg @ref HAL_NAND_IT_CB_ID NAND IT callback ID + * @param pCallback : pointer to the Callback function + * @retval status + */ +HAL_StatusTypeDef HAL_NAND_RegisterCallback(NAND_HandleTypeDef *hnand, HAL_NAND_CallbackIDTypeDef CallbackId, + pNAND_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + return HAL_ERROR; + } + + if (hnand->State == HAL_NAND_STATE_READY) + { + switch (CallbackId) + { + case HAL_NAND_MSP_INIT_CB_ID : + hnand->MspInitCallback = pCallback; + break; + case HAL_NAND_MSP_DEINIT_CB_ID : + hnand->MspDeInitCallback = pCallback; + break; + case HAL_NAND_IT_CB_ID : + hnand->ItCallback = pCallback; + break; + default : + /* update return status */ + status = HAL_ERROR; + break; + } + } + else if (hnand->State == HAL_NAND_STATE_RESET) + { + switch (CallbackId) + { + case HAL_NAND_MSP_INIT_CB_ID : + hnand->MspInitCallback = pCallback; + break; + case HAL_NAND_MSP_DEINIT_CB_ID : + hnand->MspDeInitCallback = pCallback; + break; + default : + /* update return status */ + status = HAL_ERROR; + break; + } + } + else + { + /* update return status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Unregister a User NAND Callback + * NAND Callback is redirected to the weak predefined callback + * @param hnand : NAND handle + * @param CallbackId : ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_NAND_MSP_INIT_CB_ID NAND MspInit callback ID + * @arg @ref HAL_NAND_MSP_DEINIT_CB_ID NAND MspDeInit callback ID + * @arg @ref HAL_NAND_IT_CB_ID NAND IT callback ID + * @retval status + */ +HAL_StatusTypeDef HAL_NAND_UnRegisterCallback(NAND_HandleTypeDef *hnand, HAL_NAND_CallbackIDTypeDef CallbackId) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (hnand->State == HAL_NAND_STATE_READY) + { + switch (CallbackId) + { + case HAL_NAND_MSP_INIT_CB_ID : + hnand->MspInitCallback = HAL_NAND_MspInit; + break; + case HAL_NAND_MSP_DEINIT_CB_ID : + hnand->MspDeInitCallback = HAL_NAND_MspDeInit; + break; + case HAL_NAND_IT_CB_ID : + hnand->ItCallback = HAL_NAND_ITCallback; + break; + default : + /* update return status */ + status = HAL_ERROR; + break; + } + } + else if (hnand->State == HAL_NAND_STATE_RESET) + { + switch (CallbackId) + { + case HAL_NAND_MSP_INIT_CB_ID : + hnand->MspInitCallback = HAL_NAND_MspInit; + break; + case HAL_NAND_MSP_DEINIT_CB_ID : + hnand->MspDeInitCallback = HAL_NAND_MspDeInit; + break; + default : + /* update return status */ + status = HAL_ERROR; + break; + } + } + else + { + /* update return status */ + status = HAL_ERROR; + } + + return status; +} +#endif /* USE_HAL_NAND_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup NAND_Exported_Functions_Group3 Peripheral Control functions + * @brief management functions + * +@verbatim + ============================================================================== + ##### NAND Control functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to control dynamically + the NAND interface. + +@endverbatim + * @{ + */ + + +/** + * @brief Enables dynamically NAND ECC feature. + * @param hnand pointer to a NAND_HandleTypeDef structure that contains + * the configuration information for NAND module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NAND_ECC_Enable(NAND_HandleTypeDef *hnand) +{ + /* Check the NAND controller state */ + if (hnand->State == HAL_NAND_STATE_BUSY) + { + return HAL_BUSY; + } + else if (hnand->State == HAL_NAND_STATE_READY) + { + /* Update the NAND state */ + hnand->State = HAL_NAND_STATE_BUSY; + + /* Enable ECC feature */ + (void)FMC_NAND_ECC_Enable(hnand->Instance, hnand->Init.NandBank); + + /* Update the NAND state */ + hnand->State = HAL_NAND_STATE_READY; + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Disables dynamically FMC_NAND ECC feature. + * @param hnand pointer to a NAND_HandleTypeDef structure that contains + * the configuration information for NAND module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NAND_ECC_Disable(NAND_HandleTypeDef *hnand) +{ + /* Check the NAND controller state */ + if (hnand->State == HAL_NAND_STATE_BUSY) + { + return HAL_BUSY; + } + else if (hnand->State == HAL_NAND_STATE_READY) + { + /* Update the NAND state */ + hnand->State = HAL_NAND_STATE_BUSY; + + /* Disable ECC feature */ + (void)FMC_NAND_ECC_Disable(hnand->Instance, hnand->Init.NandBank); + + /* Update the NAND state */ + hnand->State = HAL_NAND_STATE_READY; + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Disables dynamically NAND ECC feature. + * @param hnand pointer to a NAND_HandleTypeDef structure that contains + * the configuration information for NAND module. + * @param ECCval pointer to ECC value + * @param Timeout maximum timeout to wait + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NAND_GetECC(NAND_HandleTypeDef *hnand, uint32_t *ECCval, uint32_t Timeout) +{ + HAL_StatusTypeDef status; + + /* Check the NAND controller state */ + if (hnand->State == HAL_NAND_STATE_BUSY) + { + return HAL_BUSY; + } + else if (hnand->State == HAL_NAND_STATE_READY) + { + /* Update the NAND state */ + hnand->State = HAL_NAND_STATE_BUSY; + + /* Get NAND ECC value */ + status = FMC_NAND_GetECC(hnand->Instance, ECCval, hnand->Init.NandBank, Timeout); + + /* Update the NAND state */ + hnand->State = HAL_NAND_STATE_READY; + } + else + { + return HAL_ERROR; + } + + return status; +} + +/** + * @} + */ + + +/** @defgroup NAND_Exported_Functions_Group4 Peripheral State functions + * @brief Peripheral State functions + * +@verbatim + ============================================================================== + ##### NAND State functions ##### + ============================================================================== + [..] + This subsection permits to get in run-time the status of the NAND controller + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief return the NAND state + * @param hnand pointer to a NAND_HandleTypeDef structure that contains + * the configuration information for NAND module. + * @retval HAL state + */ +HAL_NAND_StateTypeDef HAL_NAND_GetState(const NAND_HandleTypeDef *hnand) +{ + return hnand->State; +} + +/** + * @brief NAND memory read status + * @param hnand pointer to a NAND_HandleTypeDef structure that contains + * the configuration information for NAND module. + * @retval NAND status + */ +uint32_t HAL_NAND_Read_Status(const NAND_HandleTypeDef *hnand) +{ + uint32_t data; + uint32_t deviceaddress; + UNUSED(hnand); + + /* Identify the device address */ +#if defined(FMC_Bank2_3) + if (hnand->Init.NandBank == FMC_NAND_BANK2) + { + deviceaddress = NAND_DEVICE1; + } + else + { + deviceaddress = NAND_DEVICE2; + } +#else + deviceaddress = NAND_DEVICE; +#endif /* FMC_Bank2_3 */ + + /* Send Read status operation command */ + *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_STATUS; + + /* Read status register data */ + data = *(__IO uint8_t *)deviceaddress; + + /* Return the status */ + if ((data & NAND_ERROR) == NAND_ERROR) + { + return NAND_ERROR; + } + else if ((data & NAND_READY) == NAND_READY) + { + return NAND_READY; + } + else + { + return NAND_BUSY; + } +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_NAND_MODULE_ENABLED */ + +/** + * @} + */ + +#endif /* FMC_Bank3) || defined(FMC_Bank2_3) || defined(FSMC_Bank2_3 */ diff --git a/cubemx/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_nor.c b/cubemx/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_nor.c new file mode 100644 index 0000000..22366b4 --- /dev/null +++ b/cubemx/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_nor.c @@ -0,0 +1,1641 @@ +/** + ****************************************************************************** + * @file stm32f4xx_hal_nor.c + * @author MCD Application Team + * @brief NOR HAL module driver. + * This file provides a generic firmware to drive NOR memories mounted + * as external device. + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + This driver is a generic layered driver which contains a set of APIs used to + control NOR flash memories. It uses the FMC/FSMC layer functions to interface + with NOR devices. This driver is used as follows: + + (+) NOR flash memory configuration sequence using the function HAL_NOR_Init() + with control and timing parameters for both normal and extended mode. + + (+) Read NOR flash memory manufacturer code and device IDs using the function + HAL_NOR_Read_ID(). The read information is stored in the NOR_ID_TypeDef + structure declared by the function caller. + + (+) Access NOR flash memory by read/write data unit operations using the functions + HAL_NOR_Read(), HAL_NOR_Program(). + + (+) Perform NOR flash erase block/chip operations using the functions + HAL_NOR_Erase_Block() and HAL_NOR_Erase_Chip(). + + (+) Read the NOR flash CFI (common flash interface) IDs using the function + HAL_NOR_Read_CFI(). The read information is stored in the NOR_CFI_TypeDef + structure declared by the function caller. + + (+) You can also control the NOR device by calling the control APIs HAL_NOR_WriteOperation_Enable()/ + HAL_NOR_WriteOperation_Disable() to respectively enable/disable the NOR write operation + + (+) You can monitor the NOR device HAL state by calling the function + HAL_NOR_GetState() + [..] + (@) This driver is a set of generic APIs which handle standard NOR flash operations. + If a NOR flash device contains different operations and/or implementations, + it should be implemented separately. + + *** NOR HAL driver macros list *** + ============================================= + [..] + Below the list of most used macros in NOR HAL driver. + + (+) NOR_WRITE : NOR memory write data to specified address + + *** Callback registration *** + ============================================= + [..] + The compilation define USE_HAL_NOR_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + + Use Functions HAL_NOR_RegisterCallback() to register a user callback, + it allows to register following callbacks: + (+) MspInitCallback : NOR MspInit. + (+) MspDeInitCallback : NOR MspDeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + Use function HAL_NOR_UnRegisterCallback() to reset a callback to the default + weak (overridden) function. It allows to reset following callbacks: + (+) MspInitCallback : NOR MspInit. + (+) MspDeInitCallback : NOR MspDeInit. + This function) takes as parameters the HAL peripheral handle and the Callback ID. + + By default, after the HAL_NOR_Init and if the state is HAL_NOR_STATE_RESET + all callbacks are reset to the corresponding legacy weak (overridden) functions. + Exception done for MspInit and MspDeInit callbacks that are respectively + reset to the legacy weak (overridden) functions in the HAL_NOR_Init + and HAL_NOR_DeInit only when these callbacks are null (not registered beforehand). + If not, MspInit or MspDeInit are not null, the HAL_NOR_Init and HAL_NOR_DeInit + keep and use the user MspInit/MspDeInit callbacks (registered beforehand) + + Callbacks can be registered/unregistered in READY state only. + Exception done for MspInit/MspDeInit callbacks that can be registered/unregistered + in READY or RESET state, thus registered (user) MspInit/DeInit callbacks can be used + during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using HAL_NOR_RegisterCallback before calling HAL_NOR_DeInit + or HAL_NOR_Init function. + + When The compilation define USE_HAL_NOR_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registering feature is not available + and weak (overridden) callbacks are used. + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal.h" + +#if defined(FMC_Bank1) || defined(FSMC_Bank1) + +/** @addtogroup STM32F4xx_HAL_Driver + * @{ + */ + +#ifdef HAL_NOR_MODULE_ENABLED + +/** @defgroup NOR NOR + * @brief NOR driver modules + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +/** @defgroup NOR_Private_Defines NOR Private Defines + * @{ + */ + +/* Constants to define address to set to write a command */ +#define NOR_CMD_ADDRESS_FIRST_BYTE (uint16_t)0x0AAA +#define NOR_CMD_ADDRESS_FIRST_CFI_BYTE (uint16_t)0x00AA +#define NOR_CMD_ADDRESS_SECOND_BYTE (uint16_t)0x0555 +#define NOR_CMD_ADDRESS_THIRD_BYTE (uint16_t)0x0AAA + +#define NOR_CMD_ADDRESS_FIRST (uint16_t)0x0555 +#define NOR_CMD_ADDRESS_FIRST_CFI (uint16_t)0x0055 +#define NOR_CMD_ADDRESS_SECOND (uint16_t)0x02AA +#define NOR_CMD_ADDRESS_THIRD (uint16_t)0x0555 +#define NOR_CMD_ADDRESS_FOURTH (uint16_t)0x0555 +#define NOR_CMD_ADDRESS_FIFTH (uint16_t)0x02AA +#define NOR_CMD_ADDRESS_SIXTH (uint16_t)0x0555 + +/* Constants to define data to program a command */ +#define NOR_CMD_DATA_READ_RESET (uint16_t)0x00F0 +#define NOR_CMD_DATA_FIRST (uint16_t)0x00AA +#define NOR_CMD_DATA_SECOND (uint16_t)0x0055 +#define NOR_CMD_DATA_AUTO_SELECT (uint16_t)0x0090 +#define NOR_CMD_DATA_PROGRAM (uint16_t)0x00A0 +#define NOR_CMD_DATA_CHIP_BLOCK_ERASE_THIRD (uint16_t)0x0080 +#define NOR_CMD_DATA_CHIP_BLOCK_ERASE_FOURTH (uint16_t)0x00AA +#define NOR_CMD_DATA_CHIP_BLOCK_ERASE_FIFTH (uint16_t)0x0055 +#define NOR_CMD_DATA_CHIP_ERASE (uint16_t)0x0010 +#define NOR_CMD_DATA_CFI (uint16_t)0x0098 + +#define NOR_CMD_DATA_BUFFER_AND_PROG (uint8_t)0x25 +#define NOR_CMD_DATA_BUFFER_AND_PROG_CONFIRM (uint8_t)0x29 +#define NOR_CMD_DATA_BLOCK_ERASE (uint8_t)0x30 + +#define NOR_CMD_READ_ARRAY (uint16_t)0x00FF +#define NOR_CMD_WORD_PROGRAM (uint16_t)0x0040 +#define NOR_CMD_BUFFERED_PROGRAM (uint16_t)0x00E8 +#define NOR_CMD_CONFIRM (uint16_t)0x00D0 +#define NOR_CMD_BLOCK_ERASE (uint16_t)0x0020 +#define NOR_CMD_BLOCK_UNLOCK (uint16_t)0x0060 +#define NOR_CMD_READ_STATUS_REG (uint16_t)0x0070 +#define NOR_CMD_CLEAR_STATUS_REG (uint16_t)0x0050 + +/* Mask on NOR STATUS REGISTER */ +#define NOR_MASK_STATUS_DQ4 (uint16_t)0x0010 +#define NOR_MASK_STATUS_DQ5 (uint16_t)0x0020 +#define NOR_MASK_STATUS_DQ6 (uint16_t)0x0040 +#define NOR_MASK_STATUS_DQ7 (uint16_t)0x0080 + +/* Address of the primary command set */ +#define NOR_ADDRESS_COMMAND_SET (uint16_t)0x0013 + +/* Command set code assignment (defined in JEDEC JEP137B version may 2004) */ +#define NOR_INTEL_SHARP_EXT_COMMAND_SET (uint16_t)0x0001 /* Supported in this driver */ +#define NOR_AMD_FUJITSU_COMMAND_SET (uint16_t)0x0002 /* Supported in this driver */ +#define NOR_INTEL_STANDARD_COMMAND_SET (uint16_t)0x0003 /* Not Supported in this driver */ +#define NOR_AMD_FUJITSU_EXT_COMMAND_SET (uint16_t)0x0004 /* Not Supported in this driver */ +#define NOR_WINDBOND_STANDARD_COMMAND_SET (uint16_t)0x0006 /* Not Supported in this driver */ +#define NOR_MITSUBISHI_STANDARD_COMMAND_SET (uint16_t)0x0100 /* Not Supported in this driver */ +#define NOR_MITSUBISHI_EXT_COMMAND_SET (uint16_t)0x0101 /* Not Supported in this driver */ +#define NOR_PAGE_WRITE_COMMAND_SET (uint16_t)0x0102 /* Not Supported in this driver */ +#define NOR_INTEL_PERFORMANCE_COMMAND_SET (uint16_t)0x0200 /* Not Supported in this driver */ +#define NOR_INTEL_DATA_COMMAND_SET (uint16_t)0x0210 /* Not Supported in this driver */ + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/** @defgroup NOR_Private_Variables NOR Private Variables + * @{ + */ + +static uint32_t uwNORMemoryDataWidth = NOR_MEMORY_8B; + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @defgroup NOR_Exported_Functions NOR Exported Functions + * @{ + */ + +/** @defgroup NOR_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * + @verbatim + ============================================================================== + ##### NOR Initialization and de_initialization functions ##### + ============================================================================== + [..] + This section provides functions allowing to initialize/de-initialize + the NOR memory + +@endverbatim + * @{ + */ + +/** + * @brief Perform the NOR memory Initialization sequence + * @param hnor pointer to a NOR_HandleTypeDef structure that contains + * the configuration information for NOR module. + * @param Timing pointer to NOR control timing structure + * @param ExtTiming pointer to NOR extended mode timing structure + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NOR_Init(NOR_HandleTypeDef *hnor, FMC_NORSRAM_TimingTypeDef *Timing, + FMC_NORSRAM_TimingTypeDef *ExtTiming) +{ + uint32_t deviceaddress; + HAL_StatusTypeDef status = HAL_OK; + + /* Check the NOR handle parameter */ + if (hnor == NULL) + { + return HAL_ERROR; + } + + if (hnor->State == HAL_NOR_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hnor->Lock = HAL_UNLOCKED; + +#if (USE_HAL_NOR_REGISTER_CALLBACKS == 1) + if (hnor->MspInitCallback == NULL) + { + hnor->MspInitCallback = HAL_NOR_MspInit; + } + + /* Init the low level hardware */ + hnor->MspInitCallback(hnor); +#else + /* Initialize the low level hardware (MSP) */ + HAL_NOR_MspInit(hnor); +#endif /* (USE_HAL_NOR_REGISTER_CALLBACKS) */ + } + + /* Initialize NOR control Interface */ + (void)FMC_NORSRAM_Init(hnor->Instance, &(hnor->Init)); + + /* Initialize NOR timing Interface */ + (void)FMC_NORSRAM_Timing_Init(hnor->Instance, Timing, hnor->Init.NSBank); + + /* Initialize NOR extended mode timing Interface */ + (void)FMC_NORSRAM_Extended_Timing_Init(hnor->Extended, ExtTiming, + hnor->Init.NSBank, hnor->Init.ExtendedMode); + + /* Enable the NORSRAM device */ + __FMC_NORSRAM_ENABLE(hnor->Instance, hnor->Init.NSBank); + + /* Initialize NOR Memory Data Width*/ + if (hnor->Init.MemoryDataWidth == FMC_NORSRAM_MEM_BUS_WIDTH_8) + { + uwNORMemoryDataWidth = NOR_MEMORY_8B; + } + else + { + uwNORMemoryDataWidth = NOR_MEMORY_16B; + } + + /* Initialize the NOR controller state */ + hnor->State = HAL_NOR_STATE_READY; + + /* Select the NOR device address */ + if (hnor->Init.NSBank == FMC_NORSRAM_BANK1) + { + deviceaddress = NOR_MEMORY_ADRESS1; + } + else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2) + { + deviceaddress = NOR_MEMORY_ADRESS2; + } + else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3) + { + deviceaddress = NOR_MEMORY_ADRESS3; + } + else /* FMC_NORSRAM_BANK4 */ + { + deviceaddress = NOR_MEMORY_ADRESS4; + } + + if (hnor->Init.WriteOperation == FMC_WRITE_OPERATION_DISABLE) + { + (void)FMC_NORSRAM_WriteOperation_Disable(hnor->Instance, hnor->Init.NSBank); + + /* Update the NOR controller state */ + hnor->State = HAL_NOR_STATE_PROTECTED; + } + else + { + /* Get the value of the command set */ + if (uwNORMemoryDataWidth == NOR_MEMORY_8B) + { + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST_CFI_BYTE), + NOR_CMD_DATA_CFI); + } + else + { + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST_CFI), NOR_CMD_DATA_CFI); + } + + hnor->CommandSet = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_ADDRESS_COMMAND_SET); + + status = HAL_NOR_ReturnToReadMode(hnor); + } + + return status; +} + +/** + * @brief Perform NOR memory De-Initialization sequence + * @param hnor pointer to a NOR_HandleTypeDef structure that contains + * the configuration information for NOR module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NOR_DeInit(NOR_HandleTypeDef *hnor) +{ +#if (USE_HAL_NOR_REGISTER_CALLBACKS == 1) + if (hnor->MspDeInitCallback == NULL) + { + hnor->MspDeInitCallback = HAL_NOR_MspDeInit; + } + + /* DeInit the low level hardware */ + hnor->MspDeInitCallback(hnor); +#else + /* De-Initialize the low level hardware (MSP) */ + HAL_NOR_MspDeInit(hnor); +#endif /* (USE_HAL_NOR_REGISTER_CALLBACKS) */ + + /* Configure the NOR registers with their reset values */ + (void)FMC_NORSRAM_DeInit(hnor->Instance, hnor->Extended, hnor->Init.NSBank); + + /* Reset the NOR controller state */ + hnor->State = HAL_NOR_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hnor); + + return HAL_OK; +} + +/** + * @brief NOR MSP Init + * @param hnor pointer to a NOR_HandleTypeDef structure that contains + * the configuration information for NOR module. + * @retval None + */ +__weak void HAL_NOR_MspInit(NOR_HandleTypeDef *hnor) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hnor); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_NOR_MspInit could be implemented in the user file + */ +} + +/** + * @brief NOR MSP DeInit + * @param hnor pointer to a NOR_HandleTypeDef structure that contains + * the configuration information for NOR module. + * @retval None + */ +__weak void HAL_NOR_MspDeInit(NOR_HandleTypeDef *hnor) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hnor); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_NOR_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief NOR MSP Wait for Ready/Busy signal + * @param hnor pointer to a NOR_HandleTypeDef structure that contains + * the configuration information for NOR module. + * @param Timeout Maximum timeout value + * @retval None + */ +__weak void HAL_NOR_MspWait(NOR_HandleTypeDef *hnor, uint32_t Timeout) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hnor); + UNUSED(Timeout); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_NOR_MspWait could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup NOR_Exported_Functions_Group2 Input and Output functions + * @brief Input Output and memory control functions + * + @verbatim + ============================================================================== + ##### NOR Input and Output functions ##### + ============================================================================== + [..] + This section provides functions allowing to use and control the NOR memory + +@endverbatim + * @{ + */ + +/** + * @brief Read NOR flash IDs + * @param hnor pointer to a NOR_HandleTypeDef structure that contains + * the configuration information for NOR module. + * @param pNOR_ID pointer to NOR ID structure + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NOR_Read_ID(NOR_HandleTypeDef *hnor, NOR_IDTypeDef *pNOR_ID) +{ + uint32_t deviceaddress; + HAL_NOR_StateTypeDef state; + HAL_StatusTypeDef status = HAL_OK; + + /* Check the NOR controller state */ + state = hnor->State; + if (state == HAL_NOR_STATE_BUSY) + { + return HAL_BUSY; + } + else if (state == HAL_NOR_STATE_PROTECTED) + { + return HAL_ERROR; + } + else if (state == HAL_NOR_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hnor); + + /* Update the NOR controller state */ + hnor->State = HAL_NOR_STATE_BUSY; + + /* Select the NOR device address */ + if (hnor->Init.NSBank == FMC_NORSRAM_BANK1) + { + deviceaddress = NOR_MEMORY_ADRESS1; + } + else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2) + { + deviceaddress = NOR_MEMORY_ADRESS2; + } + else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3) + { + deviceaddress = NOR_MEMORY_ADRESS3; + } + else /* FMC_NORSRAM_BANK4 */ + { + deviceaddress = NOR_MEMORY_ADRESS4; + } + + /* Send read ID command */ + if (hnor->CommandSet == NOR_AMD_FUJITSU_COMMAND_SET) + { + if (uwNORMemoryDataWidth == NOR_MEMORY_8B) + { + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST_BYTE), + NOR_CMD_DATA_FIRST); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND_BYTE), + NOR_CMD_DATA_SECOND); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_THIRD_BYTE), + NOR_CMD_DATA_AUTO_SELECT); + } + else + { + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_THIRD), + NOR_CMD_DATA_AUTO_SELECT); + } + } + else if (hnor->CommandSet == NOR_INTEL_SHARP_EXT_COMMAND_SET) + { + NOR_WRITE(deviceaddress, NOR_CMD_DATA_AUTO_SELECT); + } + else + { + /* Primary command set not supported by the driver */ + status = HAL_ERROR; + } + + if (status != HAL_ERROR) + { + /* Read the NOR IDs */ + pNOR_ID->Manufacturer_Code = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, MC_ADDRESS); + pNOR_ID->Device_Code1 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, + DEVICE_CODE1_ADDR); + pNOR_ID->Device_Code2 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, + DEVICE_CODE2_ADDR); + pNOR_ID->Device_Code3 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, + DEVICE_CODE3_ADDR); + } + + /* Check the NOR controller state */ + hnor->State = state; + + /* Process unlocked */ + __HAL_UNLOCK(hnor); + } + else + { + return HAL_ERROR; + } + + return status; +} + +/** + * @brief Returns the NOR memory to Read mode. + * @param hnor pointer to a NOR_HandleTypeDef structure that contains + * the configuration information for NOR module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NOR_ReturnToReadMode(NOR_HandleTypeDef *hnor) +{ + uint32_t deviceaddress; + HAL_NOR_StateTypeDef state; + HAL_StatusTypeDef status = HAL_OK; + + /* Check the NOR controller state */ + state = hnor->State; + if (state == HAL_NOR_STATE_BUSY) + { + return HAL_BUSY; + } + else if (state == HAL_NOR_STATE_PROTECTED) + { + return HAL_ERROR; + } + else if (state == HAL_NOR_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hnor); + + /* Update the NOR controller state */ + hnor->State = HAL_NOR_STATE_BUSY; + + /* Select the NOR device address */ + if (hnor->Init.NSBank == FMC_NORSRAM_BANK1) + { + deviceaddress = NOR_MEMORY_ADRESS1; + } + else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2) + { + deviceaddress = NOR_MEMORY_ADRESS2; + } + else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3) + { + deviceaddress = NOR_MEMORY_ADRESS3; + } + else /* FMC_NORSRAM_BANK4 */ + { + deviceaddress = NOR_MEMORY_ADRESS4; + } + + if (hnor->CommandSet == NOR_AMD_FUJITSU_COMMAND_SET) + { + NOR_WRITE(deviceaddress, NOR_CMD_DATA_READ_RESET); + } + else if (hnor->CommandSet == NOR_INTEL_SHARP_EXT_COMMAND_SET) + { + NOR_WRITE(deviceaddress, NOR_CMD_READ_ARRAY); + } + else + { + /* Primary command set not supported by the driver */ + status = HAL_ERROR; + } + + /* Check the NOR controller state */ + hnor->State = state; + + /* Process unlocked */ + __HAL_UNLOCK(hnor); + } + else + { + return HAL_ERROR; + } + + return status; +} + +/** + * @brief Read data from NOR memory + * @param hnor pointer to a NOR_HandleTypeDef structure that contains + * the configuration information for NOR module. + * @param pAddress pointer to Device address + * @param pData pointer to read data + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NOR_Read(NOR_HandleTypeDef *hnor, uint32_t *pAddress, uint16_t *pData) +{ + uint32_t deviceaddress; + HAL_NOR_StateTypeDef state; + HAL_StatusTypeDef status = HAL_OK; + + /* Check the NOR controller state */ + state = hnor->State; + if (state == HAL_NOR_STATE_BUSY) + { + return HAL_BUSY; + } + else if (state == HAL_NOR_STATE_PROTECTED) + { + return HAL_ERROR; + } + else if (state == HAL_NOR_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hnor); + + /* Update the NOR controller state */ + hnor->State = HAL_NOR_STATE_BUSY; + + /* Select the NOR device address */ + if (hnor->Init.NSBank == FMC_NORSRAM_BANK1) + { + deviceaddress = NOR_MEMORY_ADRESS1; + } + else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2) + { + deviceaddress = NOR_MEMORY_ADRESS2; + } + else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3) + { + deviceaddress = NOR_MEMORY_ADRESS3; + } + else /* FMC_NORSRAM_BANK4 */ + { + deviceaddress = NOR_MEMORY_ADRESS4; + } + + /* Send read data command */ + if (hnor->CommandSet == NOR_AMD_FUJITSU_COMMAND_SET) + { + if (uwNORMemoryDataWidth == NOR_MEMORY_8B) + { + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST_BYTE), + NOR_CMD_DATA_FIRST); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND_BYTE), + NOR_CMD_DATA_SECOND); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_THIRD_BYTE), + NOR_CMD_DATA_READ_RESET); + } + else + { + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_THIRD), + NOR_CMD_DATA_READ_RESET); + } + } + else if (hnor->CommandSet == NOR_INTEL_SHARP_EXT_COMMAND_SET) + { + NOR_WRITE(pAddress, NOR_CMD_READ_ARRAY); + } + else + { + /* Primary command set not supported by the driver */ + status = HAL_ERROR; + } + + if (status != HAL_ERROR) + { + /* Read the data */ + *pData = (uint16_t)(*(__IO uint32_t *)pAddress); + } + + /* Check the NOR controller state */ + hnor->State = state; + + /* Process unlocked */ + __HAL_UNLOCK(hnor); + } + else + { + return HAL_ERROR; + } + + return status; +} + +/** + * @brief Program data to NOR memory + * @param hnor pointer to a NOR_HandleTypeDef structure that contains + * the configuration information for NOR module. + * @param pAddress Device address + * @param pData pointer to the data to write + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NOR_Program(NOR_HandleTypeDef *hnor, uint32_t *pAddress, uint16_t *pData) +{ + uint32_t deviceaddress; + HAL_StatusTypeDef status = HAL_OK; + + /* Check the NOR controller state */ + if (hnor->State == HAL_NOR_STATE_BUSY) + { + return HAL_BUSY; + } + else if (hnor->State == HAL_NOR_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hnor); + + /* Update the NOR controller state */ + hnor->State = HAL_NOR_STATE_BUSY; + + /* Select the NOR device address */ + if (hnor->Init.NSBank == FMC_NORSRAM_BANK1) + { + deviceaddress = NOR_MEMORY_ADRESS1; + } + else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2) + { + deviceaddress = NOR_MEMORY_ADRESS2; + } + else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3) + { + deviceaddress = NOR_MEMORY_ADRESS3; + } + else /* FMC_NORSRAM_BANK4 */ + { + deviceaddress = NOR_MEMORY_ADRESS4; + } + + /* Send program data command */ + if (hnor->CommandSet == NOR_AMD_FUJITSU_COMMAND_SET) + { + if (uwNORMemoryDataWidth == NOR_MEMORY_8B) + { + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST_BYTE), + NOR_CMD_DATA_FIRST); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND_BYTE), + NOR_CMD_DATA_SECOND); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_THIRD_BYTE), + NOR_CMD_DATA_PROGRAM); + } + else + { + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_THIRD), NOR_CMD_DATA_PROGRAM); + } + } + else if (hnor->CommandSet == NOR_INTEL_SHARP_EXT_COMMAND_SET) + { + NOR_WRITE(pAddress, NOR_CMD_WORD_PROGRAM); + } + else + { + /* Primary command set not supported by the driver */ + status = HAL_ERROR; + } + + if (status != HAL_ERROR) + { + /* Write the data */ + NOR_WRITE(pAddress, *pData); + } + + /* Check the NOR controller state */ + hnor->State = HAL_NOR_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hnor); + } + else + { + return HAL_ERROR; + } + + return status; +} + +/** + * @brief Reads a half-word buffer from the NOR memory. + * @param hnor pointer to the NOR handle + * @param uwAddress NOR memory internal address to read from. + * @param pData pointer to the buffer that receives the data read from the + * NOR memory. + * @param uwBufferSize number of Half word to read. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NOR_ReadBuffer(NOR_HandleTypeDef *hnor, uint32_t uwAddress, uint16_t *pData, + uint32_t uwBufferSize) +{ + uint32_t deviceaddress; + uint32_t size = uwBufferSize; + uint32_t address = uwAddress; + uint16_t *data = pData; + HAL_NOR_StateTypeDef state; + HAL_StatusTypeDef status = HAL_OK; + + /* Check the NOR controller state */ + state = hnor->State; + if (state == HAL_NOR_STATE_BUSY) + { + return HAL_BUSY; + } + else if (state == HAL_NOR_STATE_PROTECTED) + { + return HAL_ERROR; + } + else if (state == HAL_NOR_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hnor); + + /* Update the NOR controller state */ + hnor->State = HAL_NOR_STATE_BUSY; + + /* Select the NOR device address */ + if (hnor->Init.NSBank == FMC_NORSRAM_BANK1) + { + deviceaddress = NOR_MEMORY_ADRESS1; + } + else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2) + { + deviceaddress = NOR_MEMORY_ADRESS2; + } + else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3) + { + deviceaddress = NOR_MEMORY_ADRESS3; + } + else /* FMC_NORSRAM_BANK4 */ + { + deviceaddress = NOR_MEMORY_ADRESS4; + } + + /* Send read data command */ + if (hnor->CommandSet == NOR_AMD_FUJITSU_COMMAND_SET) + { + if (uwNORMemoryDataWidth == NOR_MEMORY_8B) + { + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST_BYTE), + NOR_CMD_DATA_FIRST); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND_BYTE), + NOR_CMD_DATA_SECOND); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_THIRD_BYTE), + NOR_CMD_DATA_READ_RESET); + } + else + { + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_THIRD), + NOR_CMD_DATA_READ_RESET); + } + } + else if (hnor->CommandSet == NOR_INTEL_SHARP_EXT_COMMAND_SET) + { + NOR_WRITE(deviceaddress, NOR_CMD_READ_ARRAY); + } + else + { + /* Primary command set not supported by the driver */ + status = HAL_ERROR; + } + + if (status != HAL_ERROR) + { + /* Read buffer */ + while (size > 0U) + { + *data = *(__IO uint16_t *)address; + data++; + address += 2U; + size--; + } + } + + /* Check the NOR controller state */ + hnor->State = state; + + /* Process unlocked */ + __HAL_UNLOCK(hnor); + } + else + { + return HAL_ERROR; + } + + return status; +} + +/** + * @brief Writes a half-word buffer to the NOR memory. This function must be used + only with S29GL128P NOR memory. + * @param hnor pointer to the NOR handle + * @param uwAddress NOR memory internal start write address + * @param pData pointer to source data buffer. + * @param uwBufferSize Size of the buffer to write + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NOR_ProgramBuffer(NOR_HandleTypeDef *hnor, uint32_t uwAddress, uint16_t *pData, + uint32_t uwBufferSize) +{ + uint16_t *p_currentaddress; + const uint16_t *p_endaddress; + uint16_t *data = pData; + uint32_t deviceaddress; + HAL_StatusTypeDef status = HAL_OK; + + /* Check the NOR controller state */ + if (hnor->State == HAL_NOR_STATE_BUSY) + { + return HAL_BUSY; + } + else if (hnor->State == HAL_NOR_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hnor); + + /* Update the NOR controller state */ + hnor->State = HAL_NOR_STATE_BUSY; + + /* Select the NOR device address */ + if (hnor->Init.NSBank == FMC_NORSRAM_BANK1) + { + deviceaddress = NOR_MEMORY_ADRESS1; + } + else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2) + { + deviceaddress = NOR_MEMORY_ADRESS2; + } + else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3) + { + deviceaddress = NOR_MEMORY_ADRESS3; + } + else /* FMC_NORSRAM_BANK4 */ + { + deviceaddress = NOR_MEMORY_ADRESS4; + } + + /* Initialize variables */ + p_currentaddress = (uint16_t *)(deviceaddress + uwAddress); + p_endaddress = (uint16_t *)(deviceaddress + uwAddress + (2U * (uwBufferSize - 1U))); + + if (hnor->CommandSet == NOR_AMD_FUJITSU_COMMAND_SET) + { + if (uwNORMemoryDataWidth == NOR_MEMORY_8B) + { + /* Issue unlock command sequence */ + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST_BYTE), + NOR_CMD_DATA_FIRST); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND_BYTE), + NOR_CMD_DATA_SECOND); + } + else + { + /* Issue unlock command sequence */ + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND); + } + /* Write Buffer Load Command */ + NOR_WRITE((deviceaddress + uwAddress), NOR_CMD_DATA_BUFFER_AND_PROG); + NOR_WRITE((deviceaddress + uwAddress), (uint16_t)(uwBufferSize - 1U)); + } + else if (hnor->CommandSet == NOR_INTEL_SHARP_EXT_COMMAND_SET) + { + /* Write Buffer Load Command */ + NOR_WRITE((deviceaddress + uwAddress), NOR_CMD_BUFFERED_PROGRAM); + NOR_WRITE((deviceaddress + uwAddress), (uint16_t)(uwBufferSize - 1U)); + } + else + { + /* Primary command set not supported by the driver */ + status = HAL_ERROR; + } + + if (status != HAL_ERROR) + { + /* Load Data into NOR Buffer */ + while (p_currentaddress <= p_endaddress) + { + NOR_WRITE(p_currentaddress, *data); + + data++; + p_currentaddress ++; + } + + if (hnor->CommandSet == NOR_AMD_FUJITSU_COMMAND_SET) + { + NOR_WRITE((deviceaddress + uwAddress), NOR_CMD_DATA_BUFFER_AND_PROG_CONFIRM); + } + else /* => hnor->CommandSet == NOR_INTEL_SHARP_EXT_COMMAND_SET */ + { + NOR_WRITE((deviceaddress + uwAddress), NOR_CMD_CONFIRM); + } + } + + /* Check the NOR controller state */ + hnor->State = HAL_NOR_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hnor); + } + else + { + return HAL_ERROR; + } + + return status; + +} + +/** + * @brief Erase the specified block of the NOR memory + * @param hnor pointer to a NOR_HandleTypeDef structure that contains + * the configuration information for NOR module. + * @param BlockAddress Block to erase address + * @param Address Device address + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NOR_Erase_Block(NOR_HandleTypeDef *hnor, uint32_t BlockAddress, uint32_t Address) +{ + uint32_t deviceaddress; + HAL_StatusTypeDef status = HAL_OK; + + /* Check the NOR controller state */ + if (hnor->State == HAL_NOR_STATE_BUSY) + { + return HAL_BUSY; + } + else if (hnor->State == HAL_NOR_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hnor); + + /* Update the NOR controller state */ + hnor->State = HAL_NOR_STATE_BUSY; + + /* Select the NOR device address */ + if (hnor->Init.NSBank == FMC_NORSRAM_BANK1) + { + deviceaddress = NOR_MEMORY_ADRESS1; + } + else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2) + { + deviceaddress = NOR_MEMORY_ADRESS2; + } + else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3) + { + deviceaddress = NOR_MEMORY_ADRESS3; + } + else /* FMC_NORSRAM_BANK4 */ + { + deviceaddress = NOR_MEMORY_ADRESS4; + } + + /* Send block erase command sequence */ + if (hnor->CommandSet == NOR_AMD_FUJITSU_COMMAND_SET) + { + if (uwNORMemoryDataWidth == NOR_MEMORY_8B) + { + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST_BYTE), + NOR_CMD_DATA_FIRST); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND_BYTE), + NOR_CMD_DATA_SECOND); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_THIRD_BYTE), + NOR_CMD_DATA_CHIP_BLOCK_ERASE_THIRD); + } + else + { + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_THIRD), + NOR_CMD_DATA_CHIP_BLOCK_ERASE_THIRD); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FOURTH), + NOR_CMD_DATA_CHIP_BLOCK_ERASE_FOURTH); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIFTH), + NOR_CMD_DATA_CHIP_BLOCK_ERASE_FIFTH); + } + NOR_WRITE((uint32_t)(BlockAddress + Address), NOR_CMD_DATA_BLOCK_ERASE); + } + else if (hnor->CommandSet == NOR_INTEL_SHARP_EXT_COMMAND_SET) + { + NOR_WRITE((BlockAddress + Address), NOR_CMD_BLOCK_UNLOCK); + NOR_WRITE((BlockAddress + Address), NOR_CMD_CONFIRM); + NOR_WRITE((BlockAddress + Address), NOR_CMD_BLOCK_ERASE); + NOR_WRITE((BlockAddress + Address), NOR_CMD_CONFIRM); + } + else + { + /* Primary command set not supported by the driver */ + status = HAL_ERROR; + } + + /* Check the NOR memory status and update the controller state */ + hnor->State = HAL_NOR_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hnor); + } + else + { + return HAL_ERROR; + } + + return status; + +} + +/** + * @brief Erase the entire NOR chip. + * @param hnor pointer to a NOR_HandleTypeDef structure that contains + * the configuration information for NOR module. + * @param Address Device address + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NOR_Erase_Chip(NOR_HandleTypeDef *hnor, uint32_t Address) +{ + uint32_t deviceaddress; + HAL_StatusTypeDef status = HAL_OK; + UNUSED(Address); + + /* Check the NOR controller state */ + if (hnor->State == HAL_NOR_STATE_BUSY) + { + return HAL_BUSY; + } + else if (hnor->State == HAL_NOR_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hnor); + + /* Update the NOR controller state */ + hnor->State = HAL_NOR_STATE_BUSY; + + /* Select the NOR device address */ + if (hnor->Init.NSBank == FMC_NORSRAM_BANK1) + { + deviceaddress = NOR_MEMORY_ADRESS1; + } + else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2) + { + deviceaddress = NOR_MEMORY_ADRESS2; + } + else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3) + { + deviceaddress = NOR_MEMORY_ADRESS3; + } + else /* FMC_NORSRAM_BANK4 */ + { + deviceaddress = NOR_MEMORY_ADRESS4; + } + + /* Send NOR chip erase command sequence */ + if (hnor->CommandSet == NOR_AMD_FUJITSU_COMMAND_SET) + { + if (uwNORMemoryDataWidth == NOR_MEMORY_8B) + { + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST_BYTE), + NOR_CMD_DATA_FIRST); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND_BYTE), + NOR_CMD_DATA_SECOND); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_THIRD_BYTE), + NOR_CMD_DATA_CHIP_BLOCK_ERASE_THIRD); + } + else + { + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_THIRD), + NOR_CMD_DATA_CHIP_BLOCK_ERASE_THIRD); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FOURTH), + NOR_CMD_DATA_CHIP_BLOCK_ERASE_FOURTH); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIFTH), + NOR_CMD_DATA_CHIP_BLOCK_ERASE_FIFTH); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SIXTH), + NOR_CMD_DATA_CHIP_ERASE); + } + } + else + { + /* Primary command set not supported by the driver */ + status = HAL_ERROR; + } + + /* Check the NOR memory status and update the controller state */ + hnor->State = HAL_NOR_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hnor); + } + else + { + return HAL_ERROR; + } + + return status; +} + +/** + * @brief Read NOR flash CFI IDs + * @param hnor pointer to a NOR_HandleTypeDef structure that contains + * the configuration information for NOR module. + * @param pNOR_CFI pointer to NOR CFI IDs structure + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NOR_Read_CFI(NOR_HandleTypeDef *hnor, NOR_CFITypeDef *pNOR_CFI) +{ + uint32_t deviceaddress; + HAL_NOR_StateTypeDef state; + + /* Check the NOR controller state */ + state = hnor->State; + if (state == HAL_NOR_STATE_BUSY) + { + return HAL_BUSY; + } + else if (state == HAL_NOR_STATE_PROTECTED) + { + return HAL_ERROR; + } + else if (state == HAL_NOR_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hnor); + + /* Update the NOR controller state */ + hnor->State = HAL_NOR_STATE_BUSY; + + /* Select the NOR device address */ + if (hnor->Init.NSBank == FMC_NORSRAM_BANK1) + { + deviceaddress = NOR_MEMORY_ADRESS1; + } + else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2) + { + deviceaddress = NOR_MEMORY_ADRESS2; + } + else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3) + { + deviceaddress = NOR_MEMORY_ADRESS3; + } + else /* FMC_NORSRAM_BANK4 */ + { + deviceaddress = NOR_MEMORY_ADRESS4; + } + + /* Send read CFI query command */ + if (uwNORMemoryDataWidth == NOR_MEMORY_8B) + { + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST_CFI_BYTE), + NOR_CMD_DATA_CFI); + } + else + { + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST_CFI), NOR_CMD_DATA_CFI); + } + /* read the NOR CFI information */ + pNOR_CFI->CFI_1 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, CFI1_ADDRESS); + pNOR_CFI->CFI_2 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, CFI2_ADDRESS); + pNOR_CFI->CFI_3 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, CFI3_ADDRESS); + pNOR_CFI->CFI_4 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, CFI4_ADDRESS); + + /* Check the NOR controller state */ + hnor->State = state; + + /* Process unlocked */ + __HAL_UNLOCK(hnor); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +#if (USE_HAL_NOR_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User NOR Callback + * To be used to override the weak predefined callback + * @param hnor : NOR handle + * @param CallbackId : ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_NOR_MSP_INIT_CB_ID NOR MspInit callback ID + * @arg @ref HAL_NOR_MSP_DEINIT_CB_ID NOR MspDeInit callback ID + * @param pCallback : pointer to the Callback function + * @retval status + */ +HAL_StatusTypeDef HAL_NOR_RegisterCallback(NOR_HandleTypeDef *hnor, HAL_NOR_CallbackIDTypeDef CallbackId, + pNOR_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + HAL_NOR_StateTypeDef state; + + if (pCallback == NULL) + { + return HAL_ERROR; + } + + state = hnor->State; + if ((state == HAL_NOR_STATE_READY) || (state == HAL_NOR_STATE_RESET) || (state == HAL_NOR_STATE_PROTECTED)) + { + switch (CallbackId) + { + case HAL_NOR_MSP_INIT_CB_ID : + hnor->MspInitCallback = pCallback; + break; + case HAL_NOR_MSP_DEINIT_CB_ID : + hnor->MspDeInitCallback = pCallback; + break; + default : + /* update return status */ + status = HAL_ERROR; + break; + } + } + else + { + /* update return status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Unregister a User NOR Callback + * NOR Callback is redirected to the weak predefined callback + * @param hnor : NOR handle + * @param CallbackId : ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_NOR_MSP_INIT_CB_ID NOR MspInit callback ID + * @arg @ref HAL_NOR_MSP_DEINIT_CB_ID NOR MspDeInit callback ID + * @retval status + */ +HAL_StatusTypeDef HAL_NOR_UnRegisterCallback(NOR_HandleTypeDef *hnor, HAL_NOR_CallbackIDTypeDef CallbackId) +{ + HAL_StatusTypeDef status = HAL_OK; + HAL_NOR_StateTypeDef state; + + state = hnor->State; + if ((state == HAL_NOR_STATE_READY) || (state == HAL_NOR_STATE_RESET) || (state == HAL_NOR_STATE_PROTECTED)) + { + switch (CallbackId) + { + case HAL_NOR_MSP_INIT_CB_ID : + hnor->MspInitCallback = HAL_NOR_MspInit; + break; + case HAL_NOR_MSP_DEINIT_CB_ID : + hnor->MspDeInitCallback = HAL_NOR_MspDeInit; + break; + default : + /* update return status */ + status = HAL_ERROR; + break; + } + } + else + { + /* update return status */ + status = HAL_ERROR; + } + + return status; +} +#endif /* (USE_HAL_NOR_REGISTER_CALLBACKS) */ + +/** + * @} + */ + +/** @defgroup NOR_Exported_Functions_Group3 NOR Control functions + * @brief management functions + * +@verbatim + ============================================================================== + ##### NOR Control functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to control dynamically + the NOR interface. + +@endverbatim + * @{ + */ + +/** + * @brief Enables dynamically NOR write operation. + * @param hnor pointer to a NOR_HandleTypeDef structure that contains + * the configuration information for NOR module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NOR_WriteOperation_Enable(NOR_HandleTypeDef *hnor) +{ + /* Check the NOR controller state */ + if (hnor->State == HAL_NOR_STATE_PROTECTED) + { + /* Process Locked */ + __HAL_LOCK(hnor); + + /* Update the NOR controller state */ + hnor->State = HAL_NOR_STATE_BUSY; + + /* Enable write operation */ + (void)FMC_NORSRAM_WriteOperation_Enable(hnor->Instance, hnor->Init.NSBank); + + /* Update the NOR controller state */ + hnor->State = HAL_NOR_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hnor); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Disables dynamically NOR write operation. + * @param hnor pointer to a NOR_HandleTypeDef structure that contains + * the configuration information for NOR module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NOR_WriteOperation_Disable(NOR_HandleTypeDef *hnor) +{ + /* Check the NOR controller state */ + if (hnor->State == HAL_NOR_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hnor); + + /* Update the NOR controller state */ + hnor->State = HAL_NOR_STATE_BUSY; + + /* Disable write operation */ + (void)FMC_NORSRAM_WriteOperation_Disable(hnor->Instance, hnor->Init.NSBank); + + /* Update the NOR controller state */ + hnor->State = HAL_NOR_STATE_PROTECTED; + + /* Process unlocked */ + __HAL_UNLOCK(hnor); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup NOR_Exported_Functions_Group4 NOR State functions + * @brief Peripheral State functions + * +@verbatim + ============================================================================== + ##### NOR State functions ##### + ============================================================================== + [..] + This subsection permits to get in run-time the status of the NOR controller + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief return the NOR controller state + * @param hnor pointer to a NOR_HandleTypeDef structure that contains + * the configuration information for NOR module. + * @retval NOR controller state + */ +HAL_NOR_StateTypeDef HAL_NOR_GetState(const NOR_HandleTypeDef *hnor) +{ + return hnor->State; +} + +/** + * @brief Returns the NOR operation status. + * @param hnor pointer to a NOR_HandleTypeDef structure that contains + * the configuration information for NOR module. + * @param Address Device address + * @param Timeout NOR programming Timeout + * @retval NOR_Status The returned value can be: HAL_NOR_STATUS_SUCCESS, HAL_NOR_STATUS_ERROR + * or HAL_NOR_STATUS_TIMEOUT + */ +HAL_NOR_StatusTypeDef HAL_NOR_GetStatus(NOR_HandleTypeDef *hnor, uint32_t Address, uint32_t Timeout) +{ + HAL_NOR_StatusTypeDef status = HAL_NOR_STATUS_ONGOING; + uint16_t tmpsr1; + uint16_t tmpsr2; + uint32_t tickstart; + + /* Poll on NOR memory Ready/Busy signal ------------------------------------*/ + HAL_NOR_MspWait(hnor, Timeout); + + /* Get the NOR memory operation status -------------------------------------*/ + + /* Get tick */ + tickstart = HAL_GetTick(); + + if (hnor->CommandSet == NOR_AMD_FUJITSU_COMMAND_SET) + { + while ((status != HAL_NOR_STATUS_SUCCESS) && (status != HAL_NOR_STATUS_TIMEOUT)) + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + status = HAL_NOR_STATUS_TIMEOUT; + } + } + + /* Read NOR status register (DQ6 and DQ5) */ + tmpsr1 = *(__IO uint16_t *)Address; + tmpsr2 = *(__IO uint16_t *)Address; + + /* If DQ6 did not toggle between the two reads then return HAL_NOR_STATUS_SUCCESS */ + if ((tmpsr1 & NOR_MASK_STATUS_DQ6) == (tmpsr2 & NOR_MASK_STATUS_DQ6)) + { + return HAL_NOR_STATUS_SUCCESS ; + } + + if ((tmpsr1 & NOR_MASK_STATUS_DQ5) == NOR_MASK_STATUS_DQ5) + { + status = HAL_NOR_STATUS_ONGOING; + } + + tmpsr1 = *(__IO uint16_t *)Address; + tmpsr2 = *(__IO uint16_t *)Address; + + /* If DQ6 did not toggle between the two reads then return HAL_NOR_STATUS_SUCCESS */ + if ((tmpsr1 & NOR_MASK_STATUS_DQ6) == (tmpsr2 & NOR_MASK_STATUS_DQ6)) + { + return HAL_NOR_STATUS_SUCCESS; + } + if ((tmpsr1 & NOR_MASK_STATUS_DQ5) == NOR_MASK_STATUS_DQ5) + { + return HAL_NOR_STATUS_ERROR; + } + } + } + else if (hnor->CommandSet == NOR_INTEL_SHARP_EXT_COMMAND_SET) + { + do + { + NOR_WRITE(Address, NOR_CMD_READ_STATUS_REG); + tmpsr2 = *(__IO uint16_t *)(Address); + + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + return HAL_NOR_STATUS_TIMEOUT; + } + } + } while ((tmpsr2 & NOR_MASK_STATUS_DQ7) == 0U); + + NOR_WRITE(Address, NOR_CMD_READ_STATUS_REG); + tmpsr1 = *(__IO uint16_t *)(Address); + if ((tmpsr1 & (NOR_MASK_STATUS_DQ5 | NOR_MASK_STATUS_DQ4)) != 0U) + { + /* Clear the Status Register */ + NOR_WRITE(Address, NOR_CMD_READ_STATUS_REG); + status = HAL_NOR_STATUS_ERROR; + } + else + { + status = HAL_NOR_STATUS_SUCCESS; + } + } + else + { + /* Primary command set not supported by the driver */ + status = HAL_NOR_STATUS_ERROR; + } + + /* Return the operation status */ + return status; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_NOR_MODULE_ENABLED */ + +/** + * @} + */ + +#endif /* FMC_Bank1 || FSMC_Bank1 */ diff --git a/cubemx/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pccard.c b/cubemx/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pccard.c new file mode 100644 index 0000000..a568d57 --- /dev/null +++ b/cubemx/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pccard.c @@ -0,0 +1,961 @@ +/** + ****************************************************************************** + * @file stm32f4xx_hal_pccard.c + * @author MCD Application Team + * @brief PCCARD HAL module driver. + * This file provides a generic firmware to drive PCCARD memories mounted + * as external device. + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + =============================================================================== + ##### How to use this driver ##### + =============================================================================== + [..] + This driver is a generic layered driver which contains a set of APIs used to + control PCCARD/compact flash memories. It uses the FMC/FSMC layer functions + to interface with PCCARD devices. This driver is used for: + + (+) PCCARD/Compact Flash memory configuration sequence using the function + HAL_PCCARD_Init()/HAL_CF_Init() with control and timing parameters for + both common and attribute spaces. + + (+) Read PCCARD/Compact Flash memory maker and device IDs using the function + HAL_PCCARD_Read_ID()/HAL_CF_Read_ID(). The read information is stored in + the CompactFlash_ID structure declared by the function caller. + + (+) Access PCCARD/Compact Flash memory by read/write operations using the functions + HAL_PCCARD_Read_Sector()/ HAL_PCCARD_Write_Sector() - + HAL_CF_Read_Sector()/HAL_CF_Write_Sector(), to read/write sector. + + (+) Perform PCCARD/Compact Flash Reset chip operation using the function + HAL_PCCARD_Reset()/HAL_CF_Reset. + + (+) Perform PCCARD/Compact Flash erase sector operation using the function + HAL_PCCARD_Erase_Sector()/HAL_CF_Erase_Sector. + + (+) Read the PCCARD/Compact Flash status operation using the function + HAL_PCCARD_ReadStatus()/HAL_CF_ReadStatus(). + + (+) You can monitor the PCCARD/Compact Flash device HAL state by calling + the function HAL_PCCARD_GetState()/HAL_CF_GetState() + + [..] + (@) This driver is a set of generic APIs which handle standard PCCARD/compact flash + operations. If a PCCARD/Compact Flash device contains different operations + and/or implementations, it should be implemented separately. + + *** Callback registration *** + ============================================= + [..] + The compilation define USE_HAL_PCCARD_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + + Use Functions HAL_PCCARD_RegisterCallback() to register a user callback, + it allows to register following callbacks: + (+) MspInitCallback : PCCARD MspInit. + (+) MspDeInitCallback : PCCARD MspDeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + Use function HAL_PCCARD_UnRegisterCallback() to reset a callback to the default + weak (surcharged) function. It allows to reset following callbacks: + (+) MspInitCallback : PCCARD MspInit. + (+) MspDeInitCallback : PCCARD MspDeInit. + This function) takes as parameters the HAL peripheral handle and the Callback ID. + + By default, after the HAL_PCCARD_Init and if the state is HAL_PCCARD_STATE_RESET + all callbacks are reset to the corresponding legacy weak (surcharged) functions. + Exception done for MspInit and MspDeInit callbacks that are respectively + reset to the legacy weak (surcharged) functions in the HAL_PCCARD_Init + and HAL_PCCARD_DeInit only when these callbacks are null (not registered beforehand). + If not, MspInit or MspDeInit are not null, the HAL_PCCARD_Init and HAL_PCCARD_DeInit + keep and use the user MspInit/MspDeInit callbacks (registered beforehand) + + Callbacks can be registered/unregistered in READY state only. + Exception done for MspInit/MspDeInit callbacks that can be registered/unregistered + in READY or RESET state, thus registered (user) MspInit/DeInit callbacks can be used + during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using HAL_PCCARD_RegisterCallback before calling HAL_PCCARD_DeInit + or HAL_PCCARD_Init function. + + When The compilation define USE_HAL_PCCARD_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registering feature is not available + and weak (surcharged) callbacks are used. + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal.h" + +#if defined(FMC_Bank4) || defined(FSMC_Bank4) + +/** @addtogroup STM32F4xx_HAL_Driver + * @{ + */ + +#ifdef HAL_PCCARD_MODULE_ENABLED + +/** @defgroup PCCARD PCCARD + * @brief PCCARD HAL module driver + * @{ + */ +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +/** @defgroup PCCARD_Private_Defines PCCARD Private Defines + * @{ + */ +#define PCCARD_TIMEOUT_READ_ID 0x0000FFFFU +#define PCCARD_TIMEOUT_READ_WRITE_SECTOR 0x0000FFFFU +#define PCCARD_TIMEOUT_ERASE_SECTOR 0x00000400U +#define PCCARD_TIMEOUT_STATUS 0x01000000U + +#define PCCARD_STATUS_OK (uint8_t)0x58 +#define PCCARD_STATUS_WRITE_OK (uint8_t)0x50 +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function ----------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @defgroup PCCARD_Exported_Functions PCCARD Exported Functions + * @{ + */ + +/** @defgroup PCCARD_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * + @verbatim + ============================================================================== + ##### PCCARD Initialization and de-initialization functions ##### + ============================================================================== + [..] + This section provides functions allowing to initialize/de-initialize + the PCCARD memory + +@endverbatim + * @{ + */ + +/** + * @brief Perform the PCCARD memory Initialization sequence + * @param hpccard pointer to a PCCARD_HandleTypeDef structure that contains + * the configuration information for PCCARD module. + * @param ComSpaceTiming Common space timing structure + * @param AttSpaceTiming Attribute space timing structure + * @param IOSpaceTiming IO space timing structure + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCCARD_Init(PCCARD_HandleTypeDef *hpccard, FMC_NAND_PCC_TimingTypeDef *ComSpaceTiming, + FMC_NAND_PCC_TimingTypeDef *AttSpaceTiming, + FMC_NAND_PCC_TimingTypeDef *IOSpaceTiming) +{ + /* Check the PCCARD controller state */ + if (hpccard == NULL) + { + return HAL_ERROR; + } + + if (hpccard->State == HAL_PCCARD_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hpccard->Lock = HAL_UNLOCKED; +#if (USE_HAL_PCCARD_REGISTER_CALLBACKS == 1) + if (hpccard->MspInitCallback == NULL) + { + hpccard->MspInitCallback = HAL_PCCARD_MspInit; + } + hpccard->ItCallback = HAL_PCCARD_ITCallback; + + /* Init the low level hardware */ + hpccard->MspInitCallback(hpccard); +#else + /* Initialize the low level hardware (MSP) */ + HAL_PCCARD_MspInit(hpccard); +#endif /* USE_HAL_PCCARD_REGISTER_CALLBACKS */ + } + + /* Initialize the PCCARD state */ + hpccard->State = HAL_PCCARD_STATE_BUSY; + + /* Initialize PCCARD control Interface */ + FMC_PCCARD_Init(hpccard->Instance, &(hpccard->Init)); + + /* Init PCCARD common space timing Interface */ + FMC_PCCARD_CommonSpace_Timing_Init(hpccard->Instance, ComSpaceTiming); + + /* Init PCCARD attribute space timing Interface */ + FMC_PCCARD_AttributeSpace_Timing_Init(hpccard->Instance, AttSpaceTiming); + + /* Init PCCARD IO space timing Interface */ + FMC_PCCARD_IOSpace_Timing_Init(hpccard->Instance, IOSpaceTiming); + + /* Enable the PCCARD device */ + __FMC_PCCARD_ENABLE(hpccard->Instance); + + /* Update the PCCARD state */ + hpccard->State = HAL_PCCARD_STATE_READY; + + return HAL_OK; + +} + +/** + * @brief Perform the PCCARD memory De-initialization sequence + * @param hpccard pointer to a PCCARD_HandleTypeDef structure that contains + * the configuration information for PCCARD module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCCARD_DeInit(PCCARD_HandleTypeDef *hpccard) +{ +#if (USE_HAL_PCCARD_REGISTER_CALLBACKS == 1) + if (hpccard->MspDeInitCallback == NULL) + { + hpccard->MspDeInitCallback = HAL_PCCARD_MspDeInit; + } + + /* DeInit the low level hardware */ + hpccard->MspDeInitCallback(hpccard); +#else + /* De-Initialize the low level hardware (MSP) */ + HAL_PCCARD_MspDeInit(hpccard); +#endif /* USE_HAL_PCCARD_REGISTER_CALLBACKS */ + + /* Configure the PCCARD registers with their reset values */ + FMC_PCCARD_DeInit(hpccard->Instance); + + /* Update the PCCARD controller state */ + hpccard->State = HAL_PCCARD_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hpccard); + + return HAL_OK; +} + +/** + * @brief PCCARD MSP Init + * @param hpccard pointer to a PCCARD_HandleTypeDef structure that contains + * the configuration information for PCCARD module. + * @retval None + */ +__weak void HAL_PCCARD_MspInit(PCCARD_HandleTypeDef *hpccard) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpccard); + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_PCCARD_MspInit could be implemented in the user file + */ +} + +/** + * @brief PCCARD MSP DeInit + * @param hpccard pointer to a PCCARD_HandleTypeDef structure that contains + * the configuration information for PCCARD module. + * @retval None + */ +__weak void HAL_PCCARD_MspDeInit(PCCARD_HandleTypeDef *hpccard) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpccard); + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_PCCARD_MspDeInit could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup PCCARD_Exported_Functions_Group2 Input and Output functions + * @brief Input Output and memory control functions + * + @verbatim + ============================================================================== + ##### PCCARD Input and Output functions ##### + ============================================================================== + [..] + This section provides functions allowing to use and control the PCCARD memory + +@endverbatim + * @{ + */ + +/** + * @brief Read Compact Flash's ID. + * @param hpccard pointer to a PCCARD_HandleTypeDef structure that contains + * the configuration information for PCCARD module. + * @param CompactFlash_ID Compact flash ID structure. + * @param pStatus pointer to compact flash status + * @retval HAL status + * + */ +HAL_StatusTypeDef HAL_PCCARD_Read_ID(PCCARD_HandleTypeDef *hpccard, uint8_t CompactFlash_ID[], uint8_t *pStatus) +{ + uint32_t timeout = 0U; + uint32_t index = 0U; + uint8_t status = 0U; + + /* Process Locked */ + __HAL_LOCK(hpccard); + + /* Check the PCCARD controller state */ + if (hpccard->State == HAL_PCCARD_STATE_BUSY) + { + return HAL_BUSY; + } + + /* Initialize timeout value */ + timeout = PCCARD_TIMEOUT_READ_ID; + + /* Update the PCCARD controller state */ + hpccard->State = HAL_PCCARD_STATE_BUSY; + + /* Initialize the PCCARD status */ + *pStatus = PCCARD_READY; + + /* Send the Identify Command */ + *(__IO uint16_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_STATUS_CMD) = (uint16_t)0xECEC; + + /* Read PCCARD IDs and timeout treatment */ + do + { + /* Read the PCCARD status */ + status = *(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_STATUS_CMD_ALTERNATE); + + timeout--; + } while ((status != PCCARD_STATUS_OK) && timeout); + + if (timeout == 0U) + { + *pStatus = PCCARD_TIMEOUT_ERROR; + } + else + { + /* Read PCCARD ID bytes */ + for (index = 0U; index < 16U; index++) + { + CompactFlash_ID[index] = *(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_DATA); + } + } + + /* Update the PCCARD controller state */ + hpccard->State = HAL_PCCARD_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hpccard); + + return HAL_OK; +} + +/** + * @brief Read sector from PCCARD memory + * @param hpccard pointer to a PCCARD_HandleTypeDef structure that contains + * the configuration information for PCCARD module. + * @param pBuffer pointer to destination read buffer + * @param SectorAddress Sector address to read + * @param pStatus pointer to PCCARD status + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCCARD_Read_Sector(PCCARD_HandleTypeDef *hpccard, uint16_t *pBuffer, uint16_t SectorAddress, + uint8_t *pStatus) +{ + uint32_t timeout = 0U; + uint32_t index = 0U; + uint8_t status = 0U; + + /* Process Locked */ + __HAL_LOCK(hpccard); + + /* Check the PCCARD controller state */ + if (hpccard->State == HAL_PCCARD_STATE_BUSY) + { + return HAL_BUSY; + } + + /* Initialize timeout value */ + timeout = PCCARD_TIMEOUT_READ_WRITE_SECTOR; + + /* Update the PCCARD controller state */ + hpccard->State = HAL_PCCARD_STATE_BUSY; + + /* Initialize PCCARD status */ + *pStatus = PCCARD_READY; + + /* Set the parameters to write a sector */ + *(__IO uint16_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_CYLINDER_HIGH) = (uint16_t)0x0000; + *(__IO uint16_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_SECTOR_COUNT) = ((uint16_t)0x0100) | ((uint16_t)SectorAddress); + *(__IO uint16_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_STATUS_CMD) = (uint16_t)0xE4A0; + + do + { + /* wait till the Status = 0x80 */ + status = *(__IO uint16_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_STATUS_CMD_ALTERNATE); + timeout--; + } while ((status == 0x80U) && timeout); + + if (timeout == 0U) + { + *pStatus = PCCARD_TIMEOUT_ERROR; + } + + timeout = PCCARD_TIMEOUT_READ_WRITE_SECTOR; + + do + { + /* wait till the Status = PCCARD_STATUS_OK */ + status = *(__IO uint16_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_STATUS_CMD_ALTERNATE); + timeout--; + } while ((status != PCCARD_STATUS_OK) && timeout); + + if (timeout == 0U) + { + *pStatus = PCCARD_TIMEOUT_ERROR; + } + + /* Read bytes */ + for (; index < PCCARD_SECTOR_SIZE; index++) + { + *(uint16_t *)pBuffer++ = *(uint16_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR); + } + + /* Update the PCCARD controller state */ + hpccard->State = HAL_PCCARD_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hpccard); + + return HAL_OK; +} + + +/** + * @brief Write sector to PCCARD memory + * @param hpccard pointer to a PCCARD_HandleTypeDef structure that contains + * the configuration information for PCCARD module. + * @param pBuffer pointer to source write buffer + * @param SectorAddress Sector address to write + * @param pStatus pointer to PCCARD status + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCCARD_Write_Sector(PCCARD_HandleTypeDef *hpccard, uint16_t *pBuffer, uint16_t SectorAddress, + uint8_t *pStatus) +{ + uint32_t timeout = 0U; + uint32_t index = 0U; + uint8_t status = 0U; + + /* Process Locked */ + __HAL_LOCK(hpccard); + + /* Check the PCCARD controller state */ + if (hpccard->State == HAL_PCCARD_STATE_BUSY) + { + return HAL_BUSY; + } + + /* Initialize timeout value */ + timeout = PCCARD_TIMEOUT_READ_WRITE_SECTOR; + + /* Update the PCCARD controller state */ + hpccard->State = HAL_PCCARD_STATE_BUSY; + + /* Initialize PCCARD status */ + *pStatus = PCCARD_READY; + + /* Set the parameters to write a sector */ + *(__IO uint16_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_CYLINDER_HIGH) = (uint16_t)0x0000; + *(__IO uint16_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_SECTOR_COUNT) = ((uint16_t)0x0100) | ((uint16_t)SectorAddress); + *(__IO uint16_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_STATUS_CMD) = (uint16_t)0x30A0; + + do + { + /* Wait till the Status = PCCARD_STATUS_OK */ + status = *(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_STATUS_CMD_ALTERNATE); + timeout--; + } while ((status != PCCARD_STATUS_OK) && timeout); + + if (timeout == 0U) + { + *pStatus = PCCARD_TIMEOUT_ERROR; + } + + /* Write bytes */ + for (; index < PCCARD_SECTOR_SIZE; index++) + { + *(uint16_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR) = *(uint16_t *)pBuffer++; + } + + do + { + /* Wait till the Status = PCCARD_STATUS_WRITE_OK */ + status = *(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_STATUS_CMD_ALTERNATE); + timeout--; + } while ((status != PCCARD_STATUS_WRITE_OK) && timeout); + + if (timeout == 0U) + { + *pStatus = PCCARD_TIMEOUT_ERROR; + } + + /* Update the PCCARD controller state */ + hpccard->State = HAL_PCCARD_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hpccard); + + return HAL_OK; +} + + +/** + * @brief Erase sector from PCCARD memory + * @param hpccard pointer to a PCCARD_HandleTypeDef structure that contains + * the configuration information for PCCARD module. + * @param SectorAddress Sector address to erase + * @param pStatus pointer to PCCARD status + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCCARD_Erase_Sector(PCCARD_HandleTypeDef *hpccard, uint16_t SectorAddress, uint8_t *pStatus) +{ + uint32_t timeout = PCCARD_TIMEOUT_ERASE_SECTOR; + uint8_t status = 0U; + + /* Process Locked */ + __HAL_LOCK(hpccard); + + /* Check the PCCARD controller state */ + if (hpccard->State == HAL_PCCARD_STATE_BUSY) + { + return HAL_BUSY; + } + + /* Update the PCCARD controller state */ + hpccard->State = HAL_PCCARD_STATE_BUSY; + + /* Initialize PCCARD status */ + *pStatus = PCCARD_READY; + + /* Set the parameters to write a sector */ + *(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_CYLINDER_LOW) = 0x00; + *(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_CYLINDER_HIGH) = 0x00; + *(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_SECTOR_NUMBER) = SectorAddress; + *(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_SECTOR_COUNT) = 0x01; + *(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_CARD_HEAD) = 0xA0; + *(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_STATUS_CMD) = ATA_ERASE_SECTOR_CMD; + + /* wait till the PCCARD is ready */ + status = *(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_STATUS_CMD_ALTERNATE); + + while ((status != PCCARD_STATUS_WRITE_OK) && timeout) + { + status = *(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_STATUS_CMD_ALTERNATE); + timeout--; + } + + if (timeout == 0U) + { + *pStatus = PCCARD_TIMEOUT_ERROR; + } + + /* Check the PCCARD controller state */ + hpccard->State = HAL_PCCARD_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hpccard); + + return HAL_OK; +} + +/** + * @brief Reset the PCCARD memory + * @param hpccard pointer to a PCCARD_HandleTypeDef structure that contains + * the configuration information for PCCARD module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCCARD_Reset(PCCARD_HandleTypeDef *hpccard) +{ + /* Process Locked */ + __HAL_LOCK(hpccard); + + /* Check the PCCARD controller state */ + if (hpccard->State == HAL_PCCARD_STATE_BUSY) + { + return HAL_BUSY; + } + + /* Provide a SW reset and Read and verify the: + - PCCard Configuration Option Register at address 0x98000200 --> 0x80 + - Card Configuration and Status Register at address 0x98000202 --> 0x00 + - Pin Replacement Register at address 0x98000204 --> 0x0C + - Socket and Copy Register at address 0x98000206 --> 0x00 + */ + + /* Check the PCCARD controller state */ + hpccard->State = HAL_PCCARD_STATE_BUSY; + + *(__IO uint8_t *)(PCCARD_ATTRIBUTE_SPACE_ADDRESS | ATA_CARD_CONFIGURATION) = 0x01; + + /* Check the PCCARD controller state */ + hpccard->State = HAL_PCCARD_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hpccard); + + return HAL_OK; +} + +/** + * @brief This function handles PCCARD device interrupt request. + * @param hpccard pointer to a PCCARD_HandleTypeDef structure that contains + * the configuration information for PCCARD module. + * @retval HAL status + */ +void HAL_PCCARD_IRQHandler(PCCARD_HandleTypeDef *hpccard) +{ + /* Check PCCARD interrupt Rising edge flag */ + if (__FMC_PCCARD_GET_FLAG(hpccard->Instance, FMC_FLAG_RISING_EDGE)) + { + /* PCCARD interrupt callback*/ +#if (USE_HAL_PCCARD_REGISTER_CALLBACKS == 1) + hpccard->ItCallback(hpccard); +#else + HAL_PCCARD_ITCallback(hpccard); +#endif /* USE_HAL_PCCARD_REGISTER_CALLBACKS */ + + /* Clear PCCARD interrupt Rising edge pending bit */ + __FMC_PCCARD_CLEAR_FLAG(hpccard->Instance, FMC_FLAG_RISING_EDGE); + } + + /* Check PCCARD interrupt Level flag */ + if (__FMC_PCCARD_GET_FLAG(hpccard->Instance, FMC_FLAG_LEVEL)) + { + /* PCCARD interrupt callback*/ +#if (USE_HAL_PCCARD_REGISTER_CALLBACKS == 1) + hpccard->ItCallback(hpccard); +#else + HAL_PCCARD_ITCallback(hpccard); +#endif /* USE_HAL_PCCARD_REGISTER_CALLBACKS */ + + /* Clear PCCARD interrupt Level pending bit */ + __FMC_PCCARD_CLEAR_FLAG(hpccard->Instance, FMC_FLAG_LEVEL); + } + + /* Check PCCARD interrupt Falling edge flag */ + if (__FMC_PCCARD_GET_FLAG(hpccard->Instance, FMC_FLAG_FALLING_EDGE)) + { + /* PCCARD interrupt callback*/ +#if (USE_HAL_PCCARD_REGISTER_CALLBACKS == 1) + hpccard->ItCallback(hpccard); +#else + HAL_PCCARD_ITCallback(hpccard); +#endif /* USE_HAL_PCCARD_REGISTER_CALLBACKS */ + + /* Clear PCCARD interrupt Falling edge pending bit */ + __FMC_PCCARD_CLEAR_FLAG(hpccard->Instance, FMC_FLAG_FALLING_EDGE); + } + + /* Check PCCARD interrupt FIFO empty flag */ + if (__FMC_PCCARD_GET_FLAG(hpccard->Instance, FMC_FLAG_FEMPT)) + { + /* PCCARD interrupt callback*/ +#if (USE_HAL_PCCARD_REGISTER_CALLBACKS == 1) + hpccard->ItCallback(hpccard); +#else + HAL_PCCARD_ITCallback(hpccard); +#endif /* USE_HAL_PCCARD_REGISTER_CALLBACKS */ + + /* Clear PCCARD interrupt FIFO empty pending bit */ + __FMC_PCCARD_CLEAR_FLAG(hpccard->Instance, FMC_FLAG_FEMPT); + } +} + +/** + * @brief PCCARD interrupt feature callback + * @param hpccard pointer to a PCCARD_HandleTypeDef structure that contains + * the configuration information for PCCARD module. + * @retval None + */ +__weak void HAL_PCCARD_ITCallback(PCCARD_HandleTypeDef *hpccard) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpccard); + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_PCCARD_ITCallback could be implemented in the user file + */ +} + +#if (USE_HAL_PCCARD_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User PCCARD Callback + * To be used instead of the weak (surcharged) predefined callback + * @param hpccard : PCCARD handle + * @param CallbackId : ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_PCCARD_MSP_INIT_CB_ID PCCARD MspInit callback ID + * @arg @ref HAL_PCCARD_MSP_DEINIT_CB_ID PCCARD MspDeInit callback ID + * @arg @ref HAL_PCCARD_IT_CB_ID PCCARD IT callback ID + * @param pCallback : pointer to the Callback function + * @retval status + */ +HAL_StatusTypeDef HAL_PCCARD_RegisterCallback(PCCARD_HandleTypeDef *hpccard, HAL_PCCARD_CallbackIDTypeDef CallbackId, + pPCCARD_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hpccard); + + if (hpccard->State == HAL_PCCARD_STATE_READY) + { + switch (CallbackId) + { + case HAL_PCCARD_MSP_INIT_CB_ID : + hpccard->MspInitCallback = pCallback; + break; + case HAL_PCCARD_MSP_DEINIT_CB_ID : + hpccard->MspDeInitCallback = pCallback; + break; + case HAL_PCCARD_IT_CB_ID : + hpccard->ItCallback = pCallback; + break; + default : + /* update return status */ + status = HAL_ERROR; + break; + } + } + else if (hpccard->State == HAL_PCCARD_STATE_RESET) + { + switch (CallbackId) + { + case HAL_PCCARD_MSP_INIT_CB_ID : + hpccard->MspInitCallback = pCallback; + break; + case HAL_PCCARD_MSP_DEINIT_CB_ID : + hpccard->MspDeInitCallback = pCallback; + break; + default : + /* update return status */ + status = HAL_ERROR; + break; + } + } + else + { + /* update return status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpccard); + return status; +} + +/** + * @brief Unregister a User PCCARD Callback + * PCCARD Callback is redirected to the weak (surcharged) predefined callback + * @param hpccard : PCCARD handle + * @param CallbackId : ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_PCCARD_MSP_INIT_CB_ID PCCARD MspInit callback ID + * @arg @ref HAL_PCCARD_MSP_DEINIT_CB_ID PCCARD MspDeInit callback ID + * @arg @ref HAL_PCCARD_IT_CB_ID PCCARD IT callback ID + * @retval status + */ +HAL_StatusTypeDef HAL_PCCARD_UnRegisterCallback(PCCARD_HandleTypeDef *hpccard, HAL_PCCARD_CallbackIDTypeDef CallbackId) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hpccard); + + if (hpccard->State == HAL_PCCARD_STATE_READY) + { + switch (CallbackId) + { + case HAL_PCCARD_MSP_INIT_CB_ID : + hpccard->MspInitCallback = HAL_PCCARD_MspInit; + break; + case HAL_PCCARD_MSP_DEINIT_CB_ID : + hpccard->MspDeInitCallback = HAL_PCCARD_MspDeInit; + break; + case HAL_PCCARD_IT_CB_ID : + hpccard->ItCallback = HAL_PCCARD_ITCallback; + break; + default : + /* update return status */ + status = HAL_ERROR; + break; + } + } + else if (hpccard->State == HAL_PCCARD_STATE_RESET) + { + switch (CallbackId) + { + case HAL_PCCARD_MSP_INIT_CB_ID : + hpccard->MspInitCallback = HAL_PCCARD_MspInit; + break; + case HAL_PCCARD_MSP_DEINIT_CB_ID : + hpccard->MspDeInitCallback = HAL_PCCARD_MspDeInit; + break; + default : + /* update return status */ + status = HAL_ERROR; + break; + } + } + else + { + /* update return status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpccard); + return status; +} +#endif /* USE_HAL_PCCARD_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup PCCARD_Exported_Functions_Group3 State functions + * @brief Peripheral State functions + * +@verbatim + ============================================================================== + ##### PCCARD State functions ##### + ============================================================================== + [..] + This subsection permits to get in run-time the status of the PCCARD controller + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief return the PCCARD controller state + * @param hpccard pointer to a PCCARD_HandleTypeDef structure that contains + * the configuration information for PCCARD module. + * @retval HAL state + */ +HAL_PCCARD_StateTypeDef HAL_PCCARD_GetState(PCCARD_HandleTypeDef *hpccard) +{ + return hpccard->State; +} + +/** + * @brief Get the compact flash memory status + * @param hpccard pointer to a PCCARD_HandleTypeDef structure that contains + * the configuration information for PCCARD module. + * @retval New status of the PCCARD operation. This parameter can be: + * - CompactFlash_TIMEOUT_ERROR: when the previous operation generate + * a Timeout error + * - CompactFlash_READY: when memory is ready for the next operation + */ +HAL_PCCARD_StatusTypeDef HAL_PCCARD_GetStatus(PCCARD_HandleTypeDef *hpccard) +{ + uint32_t timeout = PCCARD_TIMEOUT_STATUS; + uint32_t status_pccard = 0U; + + /* Check the PCCARD controller state */ + if (hpccard->State == HAL_PCCARD_STATE_BUSY) + { + return HAL_PCCARD_STATUS_ONGOING; + } + + status_pccard = *(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_STATUS_CMD_ALTERNATE); + + while ((status_pccard == PCCARD_BUSY) && timeout) + { + status_pccard = *(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_STATUS_CMD_ALTERNATE); + timeout--; + } + + if (timeout == 0U) + { + status_pccard = PCCARD_TIMEOUT_ERROR; + } + + /* Return the operation status */ + return (HAL_PCCARD_StatusTypeDef) status_pccard; +} + +/** + * @brief Reads the Compact Flash memory status using the Read status command + * @param hpccard pointer to a PCCARD_HandleTypeDef structure that contains + * the configuration information for PCCARD module. + * @retval The status of the Compact Flash memory. This parameter can be: + * - CompactFlash_BUSY: when memory is busy + * - CompactFlash_READY: when memory is ready for the next operation + * - CompactFlash_ERROR: when the previous operation generates error + */ +HAL_PCCARD_StatusTypeDef HAL_PCCARD_ReadStatus(PCCARD_HandleTypeDef *hpccard) +{ + uint8_t data = 0U; + uint8_t status_pccard = PCCARD_BUSY; + + /* Check the PCCARD controller state */ + if (hpccard->State == HAL_PCCARD_STATE_BUSY) + { + return HAL_PCCARD_STATUS_ONGOING; + } + + /* Read status operation */ + data = *(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_STATUS_CMD_ALTERNATE); + + if ((data & PCCARD_TIMEOUT_ERROR) == PCCARD_TIMEOUT_ERROR) + { + status_pccard = PCCARD_TIMEOUT_ERROR; + } + else if ((data & PCCARD_READY) == PCCARD_READY) + { + status_pccard = PCCARD_READY; + } + + return (HAL_PCCARD_StatusTypeDef) status_pccard; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_PCCARD_MODULE_ENABLED */ + +/** + * @} + */ + +#endif /* FMC_Bank4 || FSMC_Bank4 */ diff --git a/cubemx/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sram.c b/cubemx/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sram.c new file mode 100644 index 0000000..96b06f1 --- /dev/null +++ b/cubemx/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sram.c @@ -0,0 +1,1117 @@ +/** + ****************************************************************************** + * @file stm32f4xx_hal_sram.c + * @author MCD Application Team + * @brief SRAM HAL module driver. + * This file provides a generic firmware to drive SRAM memories + * mounted as external device. + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + This driver is a generic layered driver which contains a set of APIs used to + control SRAM memories. It uses the FMC layer functions to interface + with SRAM devices. + The following sequence should be followed to configure the FMC/FSMC to interface + with SRAM/PSRAM memories: + + (#) Declare a SRAM_HandleTypeDef handle structure, for example: + SRAM_HandleTypeDef hsram; and: + + (++) Fill the SRAM_HandleTypeDef handle "Init" field with the allowed + values of the structure member. + + (++) Fill the SRAM_HandleTypeDef handle "Instance" field with a predefined + base register instance for NOR or SRAM device + + (++) Fill the SRAM_HandleTypeDef handle "Extended" field with a predefined + base register instance for NOR or SRAM extended mode + + (#) Declare two FMC_NORSRAM_TimingTypeDef structures, for both normal and extended + mode timings; for example: + FMC_NORSRAM_TimingTypeDef Timing and FMC_NORSRAM_TimingTypeDef ExTiming; + and fill its fields with the allowed values of the structure member. + + (#) Initialize the SRAM Controller by calling the function HAL_SRAM_Init(). This function + performs the following sequence: + + (##) MSP hardware layer configuration using the function HAL_SRAM_MspInit() + (##) Control register configuration using the FMC NORSRAM interface function + FMC_NORSRAM_Init() + (##) Timing register configuration using the FMC NORSRAM interface function + FMC_NORSRAM_Timing_Init() + (##) Extended mode Timing register configuration using the FMC NORSRAM interface function + FMC_NORSRAM_Extended_Timing_Init() + (##) Enable the SRAM device using the macro __FMC_NORSRAM_ENABLE() + + (#) At this stage you can perform read/write accesses from/to the memory connected + to the NOR/SRAM Bank. You can perform either polling or DMA transfer using the + following APIs: + (++) HAL_SRAM_Read()/HAL_SRAM_Write() for polling read/write access + (++) HAL_SRAM_Read_DMA()/HAL_SRAM_Write_DMA() for DMA read/write transfer + + (#) You can also control the SRAM device by calling the control APIs HAL_SRAM_WriteOperation_Enable()/ + HAL_SRAM_WriteOperation_Disable() to respectively enable/disable the SRAM write operation + + (#) You can continuously monitor the SRAM device HAL state by calling the function + HAL_SRAM_GetState() + + *** Callback registration *** + ============================================= + [..] + The compilation define USE_HAL_SRAM_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + + Use Functions HAL_SRAM_RegisterCallback() to register a user callback, + it allows to register following callbacks: + (+) MspInitCallback : SRAM MspInit. + (+) MspDeInitCallback : SRAM MspDeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + Use function HAL_SRAM_UnRegisterCallback() to reset a callback to the default + weak (overridden) function. It allows to reset following callbacks: + (+) MspInitCallback : SRAM MspInit. + (+) MspDeInitCallback : SRAM MspDeInit. + This function) takes as parameters the HAL peripheral handle and the Callback ID. + + By default, after the HAL_SRAM_Init and if the state is HAL_SRAM_STATE_RESET + all callbacks are reset to the corresponding legacy weak (overridden) functions. + Exception done for MspInit and MspDeInit callbacks that are respectively + reset to the legacy weak (overridden) functions in the HAL_SRAM_Init + and HAL_SRAM_DeInit only when these callbacks are null (not registered beforehand). + If not, MspInit or MspDeInit are not null, the HAL_SRAM_Init and HAL_SRAM_DeInit + keep and use the user MspInit/MspDeInit callbacks (registered beforehand) + + Callbacks can be registered/unregistered in READY state only. + Exception done for MspInit/MspDeInit callbacks that can be registered/unregistered + in READY or RESET state, thus registered (user) MspInit/DeInit callbacks can be used + during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using HAL_SRAM_RegisterCallback before calling HAL_SRAM_DeInit + or HAL_SRAM_Init function. + + When The compilation define USE_HAL_SRAM_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registering feature is not available + and weak (overridden) callbacks are used. + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal.h" + +#if defined(FMC_Bank1) || defined(FSMC_Bank1) + +/** @addtogroup STM32F4xx_HAL_Driver + * @{ + */ + +#ifdef HAL_SRAM_MODULE_ENABLED + +/** @defgroup SRAM SRAM + * @brief SRAM driver modules + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @addtogroup SRAM_Private_Functions SRAM Private Functions + * @{ + */ +static void SRAM_DMACplt(DMA_HandleTypeDef *hdma); +static void SRAM_DMACpltProt(DMA_HandleTypeDef *hdma); +static void SRAM_DMAError(DMA_HandleTypeDef *hdma); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup SRAM_Exported_Functions SRAM Exported Functions + * @{ + */ + +/** @defgroup SRAM_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions. + * + @verbatim + ============================================================================== + ##### SRAM Initialization and de_initialization functions ##### + ============================================================================== + [..] This section provides functions allowing to initialize/de-initialize + the SRAM memory + +@endverbatim + * @{ + */ + +/** + * @brief Performs the SRAM device initialization sequence + * @param hsram pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @param Timing Pointer to SRAM control timing structure + * @param ExtTiming Pointer to SRAM extended mode timing structure + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SRAM_Init(SRAM_HandleTypeDef *hsram, FMC_NORSRAM_TimingTypeDef *Timing, + FMC_NORSRAM_TimingTypeDef *ExtTiming) +{ + /* Check the SRAM handle parameter */ + if (hsram == NULL) + { + return HAL_ERROR; + } + + if (hsram->State == HAL_SRAM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hsram->Lock = HAL_UNLOCKED; + +#if (USE_HAL_SRAM_REGISTER_CALLBACKS == 1) + if (hsram->MspInitCallback == NULL) + { + hsram->MspInitCallback = HAL_SRAM_MspInit; + } + hsram->DmaXferCpltCallback = HAL_SRAM_DMA_XferCpltCallback; + hsram->DmaXferErrorCallback = HAL_SRAM_DMA_XferErrorCallback; + + /* Init the low level hardware */ + hsram->MspInitCallback(hsram); +#else + /* Initialize the low level hardware (MSP) */ + HAL_SRAM_MspInit(hsram); +#endif /* USE_HAL_SRAM_REGISTER_CALLBACKS */ + } + + /* Initialize SRAM control Interface */ + (void)FMC_NORSRAM_Init(hsram->Instance, &(hsram->Init)); + + /* Initialize SRAM timing Interface */ + (void)FMC_NORSRAM_Timing_Init(hsram->Instance, Timing, hsram->Init.NSBank); + + /* Initialize SRAM extended mode timing Interface */ + (void)FMC_NORSRAM_Extended_Timing_Init(hsram->Extended, ExtTiming, hsram->Init.NSBank, + hsram->Init.ExtendedMode); + + /* Enable the NORSRAM device */ + __FMC_NORSRAM_ENABLE(hsram->Instance, hsram->Init.NSBank); + + /* Initialize the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief Performs the SRAM device De-initialization sequence. + * @param hsram pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SRAM_DeInit(SRAM_HandleTypeDef *hsram) +{ +#if (USE_HAL_SRAM_REGISTER_CALLBACKS == 1) + if (hsram->MspDeInitCallback == NULL) + { + hsram->MspDeInitCallback = HAL_SRAM_MspDeInit; + } + + /* DeInit the low level hardware */ + hsram->MspDeInitCallback(hsram); +#else + /* De-Initialize the low level hardware (MSP) */ + HAL_SRAM_MspDeInit(hsram); +#endif /* USE_HAL_SRAM_REGISTER_CALLBACKS */ + + /* Configure the SRAM registers with their reset values */ + (void)FMC_NORSRAM_DeInit(hsram->Instance, hsram->Extended, hsram->Init.NSBank); + + /* Reset the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hsram); + + return HAL_OK; +} + +/** + * @brief SRAM MSP Init. + * @param hsram pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @retval None + */ +__weak void HAL_SRAM_MspInit(SRAM_HandleTypeDef *hsram) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsram); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_SRAM_MspInit could be implemented in the user file + */ +} + +/** + * @brief SRAM MSP DeInit. + * @param hsram pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @retval None + */ +__weak void HAL_SRAM_MspDeInit(SRAM_HandleTypeDef *hsram) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsram); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_SRAM_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief DMA transfer complete callback. + * @param hdma pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @retval None + */ +__weak void HAL_SRAM_DMA_XferCpltCallback(DMA_HandleTypeDef *hdma) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdma); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_SRAM_DMA_XferCpltCallback could be implemented in the user file + */ +} + +/** + * @brief DMA transfer complete error callback. + * @param hdma pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @retval None + */ +__weak void HAL_SRAM_DMA_XferErrorCallback(DMA_HandleTypeDef *hdma) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdma); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_SRAM_DMA_XferErrorCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup SRAM_Exported_Functions_Group2 Input Output and memory control functions + * @brief Input Output and memory control functions + * + @verbatim + ============================================================================== + ##### SRAM Input and Output functions ##### + ============================================================================== + [..] + This section provides functions allowing to use and control the SRAM memory + +@endverbatim + * @{ + */ + +/** + * @brief Reads 8-bit buffer from SRAM memory. + * @param hsram pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @param pAddress Pointer to read start address + * @param pDstBuffer Pointer to destination buffer + * @param BufferSize Size of the buffer to read from memory + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SRAM_Read_8b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint8_t *pDstBuffer, + uint32_t BufferSize) +{ + uint32_t size; + __IO uint8_t *psramaddress = (uint8_t *)pAddress; + uint8_t *pdestbuff = pDstBuffer; + HAL_SRAM_StateTypeDef state = hsram->State; + + /* Check the SRAM controller state */ + if ((state == HAL_SRAM_STATE_READY) || (state == HAL_SRAM_STATE_PROTECTED)) + { + /* Process Locked */ + __HAL_LOCK(hsram); + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_BUSY; + + /* Read data from memory */ + for (size = BufferSize; size != 0U; size--) + { + *pdestbuff = *psramaddress; + pdestbuff++; + psramaddress++; + } + + /* Update the SRAM controller state */ + hsram->State = state; + + /* Process unlocked */ + __HAL_UNLOCK(hsram); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Writes 8-bit buffer to SRAM memory. + * @param hsram pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @param pAddress Pointer to write start address + * @param pSrcBuffer Pointer to source buffer to write + * @param BufferSize Size of the buffer to write to memory + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SRAM_Write_8b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint8_t *pSrcBuffer, + uint32_t BufferSize) +{ + uint32_t size; + __IO uint8_t *psramaddress = (uint8_t *)pAddress; + uint8_t *psrcbuff = pSrcBuffer; + + /* Check the SRAM controller state */ + if (hsram->State == HAL_SRAM_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hsram); + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_BUSY; + + /* Write data to memory */ + for (size = BufferSize; size != 0U; size--) + { + *psramaddress = *psrcbuff; + psrcbuff++; + psramaddress++; + } + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hsram); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Reads 16-bit buffer from SRAM memory. + * @param hsram pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @param pAddress Pointer to read start address + * @param pDstBuffer Pointer to destination buffer + * @param BufferSize Size of the buffer to read from memory + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SRAM_Read_16b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint16_t *pDstBuffer, + uint32_t BufferSize) +{ + uint32_t size; + __IO uint32_t *psramaddress = pAddress; + uint16_t *pdestbuff = pDstBuffer; + uint8_t limit; + HAL_SRAM_StateTypeDef state = hsram->State; + + /* Check the SRAM controller state */ + if ((state == HAL_SRAM_STATE_READY) || (state == HAL_SRAM_STATE_PROTECTED)) + { + /* Process Locked */ + __HAL_LOCK(hsram); + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_BUSY; + + /* Check if the size is a 32-bits multiple */ + limit = (((BufferSize % 2U) != 0U) ? 1U : 0U); + + /* Read data from memory */ + for (size = BufferSize; size != limit; size -= 2U) + { + *pdestbuff = (uint16_t)((*psramaddress) & 0x0000FFFFU); + pdestbuff++; + *pdestbuff = (uint16_t)(((*psramaddress) & 0xFFFF0000U) >> 16U); + pdestbuff++; + psramaddress++; + } + + /* Read last 16-bits if size is not 32-bits multiple */ + if (limit != 0U) + { + *pdestbuff = (uint16_t)((*psramaddress) & 0x0000FFFFU); + } + + /* Update the SRAM controller state */ + hsram->State = state; + + /* Process unlocked */ + __HAL_UNLOCK(hsram); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Writes 16-bit buffer to SRAM memory. + * @param hsram pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @param pAddress Pointer to write start address + * @param pSrcBuffer Pointer to source buffer to write + * @param BufferSize Size of the buffer to write to memory + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SRAM_Write_16b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint16_t *pSrcBuffer, + uint32_t BufferSize) +{ + uint32_t size; + __IO uint32_t *psramaddress = pAddress; + uint16_t *psrcbuff = pSrcBuffer; + uint8_t limit; + + /* Check the SRAM controller state */ + if (hsram->State == HAL_SRAM_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hsram); + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_BUSY; + + /* Check if the size is a 32-bits multiple */ + limit = (((BufferSize % 2U) != 0U) ? 1U : 0U); + + /* Write data to memory */ + for (size = BufferSize; size != limit; size -= 2U) + { + *psramaddress = (uint32_t)(*psrcbuff); + psrcbuff++; + *psramaddress |= ((uint32_t)(*psrcbuff) << 16U); + psrcbuff++; + psramaddress++; + } + + /* Write last 16-bits if size is not 32-bits multiple */ + if (limit != 0U) + { + *psramaddress = ((uint32_t)(*psrcbuff) & 0x0000FFFFU) | ((*psramaddress) & 0xFFFF0000U); + } + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hsram); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Reads 32-bit buffer from SRAM memory. + * @param hsram pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @param pAddress Pointer to read start address + * @param pDstBuffer Pointer to destination buffer + * @param BufferSize Size of the buffer to read from memory + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SRAM_Read_32b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pDstBuffer, + uint32_t BufferSize) +{ + uint32_t size; + __IO uint32_t *psramaddress = pAddress; + uint32_t *pdestbuff = pDstBuffer; + HAL_SRAM_StateTypeDef state = hsram->State; + + /* Check the SRAM controller state */ + if ((state == HAL_SRAM_STATE_READY) || (state == HAL_SRAM_STATE_PROTECTED)) + { + /* Process Locked */ + __HAL_LOCK(hsram); + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_BUSY; + + /* Read data from memory */ + for (size = BufferSize; size != 0U; size--) + { + *pdestbuff = *psramaddress; + pdestbuff++; + psramaddress++; + } + + /* Update the SRAM controller state */ + hsram->State = state; + + /* Process unlocked */ + __HAL_UNLOCK(hsram); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Writes 32-bit buffer to SRAM memory. + * @param hsram pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @param pAddress Pointer to write start address + * @param pSrcBuffer Pointer to source buffer to write + * @param BufferSize Size of the buffer to write to memory + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SRAM_Write_32b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pSrcBuffer, + uint32_t BufferSize) +{ + uint32_t size; + __IO uint32_t *psramaddress = pAddress; + uint32_t *psrcbuff = pSrcBuffer; + + /* Check the SRAM controller state */ + if (hsram->State == HAL_SRAM_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hsram); + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_BUSY; + + /* Write data to memory */ + for (size = BufferSize; size != 0U; size--) + { + *psramaddress = *psrcbuff; + psrcbuff++; + psramaddress++; + } + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hsram); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Reads a Words data from the SRAM memory using DMA transfer. + * @param hsram pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @param pAddress Pointer to read start address + * @param pDstBuffer Pointer to destination buffer + * @param BufferSize Size of the buffer to read from memory + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SRAM_Read_DMA(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pDstBuffer, + uint32_t BufferSize) +{ + HAL_StatusTypeDef status; + HAL_SRAM_StateTypeDef state = hsram->State; + + /* Check the SRAM controller state */ + if ((state == HAL_SRAM_STATE_READY) || (state == HAL_SRAM_STATE_PROTECTED)) + { + /* Process Locked */ + __HAL_LOCK(hsram); + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_BUSY; + + /* Configure DMA user callbacks */ + if (state == HAL_SRAM_STATE_READY) + { + hsram->hdma->XferCpltCallback = SRAM_DMACplt; + } + else + { + hsram->hdma->XferCpltCallback = SRAM_DMACpltProt; + } + hsram->hdma->XferErrorCallback = SRAM_DMAError; + + /* Enable the DMA Stream */ + status = HAL_DMA_Start_IT(hsram->hdma, (uint32_t)pAddress, (uint32_t)pDstBuffer, (uint32_t)BufferSize); + + /* Process unlocked */ + __HAL_UNLOCK(hsram); + } + else + { + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Writes a Words data buffer to SRAM memory using DMA transfer. + * @param hsram pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @param pAddress Pointer to write start address + * @param pSrcBuffer Pointer to source buffer to write + * @param BufferSize Size of the buffer to write to memory + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SRAM_Write_DMA(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pSrcBuffer, + uint32_t BufferSize) +{ + HAL_StatusTypeDef status; + + /* Check the SRAM controller state */ + if (hsram->State == HAL_SRAM_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hsram); + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_BUSY; + + /* Configure DMA user callbacks */ + hsram->hdma->XferCpltCallback = SRAM_DMACplt; + hsram->hdma->XferErrorCallback = SRAM_DMAError; + + /* Enable the DMA Stream */ + status = HAL_DMA_Start_IT(hsram->hdma, (uint32_t)pSrcBuffer, (uint32_t)pAddress, (uint32_t)BufferSize); + + /* Process unlocked */ + __HAL_UNLOCK(hsram); + } + else + { + status = HAL_ERROR; + } + + return status; +} + +#if (USE_HAL_SRAM_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User SRAM Callback + * To be used to override the weak predefined callback + * @param hsram : SRAM handle + * @param CallbackId : ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_SRAM_MSP_INIT_CB_ID SRAM MspInit callback ID + * @arg @ref HAL_SRAM_MSP_DEINIT_CB_ID SRAM MspDeInit callback ID + * @param pCallback : pointer to the Callback function + * @retval status + */ +HAL_StatusTypeDef HAL_SRAM_RegisterCallback(SRAM_HandleTypeDef *hsram, HAL_SRAM_CallbackIDTypeDef CallbackId, + pSRAM_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + HAL_SRAM_StateTypeDef state; + + if (pCallback == NULL) + { + return HAL_ERROR; + } + + state = hsram->State; + if ((state == HAL_SRAM_STATE_READY) || (state == HAL_SRAM_STATE_RESET) || (state == HAL_SRAM_STATE_PROTECTED)) + { + switch (CallbackId) + { + case HAL_SRAM_MSP_INIT_CB_ID : + hsram->MspInitCallback = pCallback; + break; + case HAL_SRAM_MSP_DEINIT_CB_ID : + hsram->MspDeInitCallback = pCallback; + break; + default : + /* update return status */ + status = HAL_ERROR; + break; + } + } + else + { + /* update return status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Unregister a User SRAM Callback + * SRAM Callback is redirected to the weak predefined callback + * @param hsram : SRAM handle + * @param CallbackId : ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_SRAM_MSP_INIT_CB_ID SRAM MspInit callback ID + * @arg @ref HAL_SRAM_MSP_DEINIT_CB_ID SRAM MspDeInit callback ID + * @arg @ref HAL_SRAM_DMA_XFER_CPLT_CB_ID SRAM DMA Xfer Complete callback ID + * @arg @ref HAL_SRAM_DMA_XFER_ERR_CB_ID SRAM DMA Xfer Error callback ID + * @retval status + */ +HAL_StatusTypeDef HAL_SRAM_UnRegisterCallback(SRAM_HandleTypeDef *hsram, HAL_SRAM_CallbackIDTypeDef CallbackId) +{ + HAL_StatusTypeDef status = HAL_OK; + HAL_SRAM_StateTypeDef state; + + state = hsram->State; + if ((state == HAL_SRAM_STATE_READY) || (state == HAL_SRAM_STATE_PROTECTED)) + { + switch (CallbackId) + { + case HAL_SRAM_MSP_INIT_CB_ID : + hsram->MspInitCallback = HAL_SRAM_MspInit; + break; + case HAL_SRAM_MSP_DEINIT_CB_ID : + hsram->MspDeInitCallback = HAL_SRAM_MspDeInit; + break; + case HAL_SRAM_DMA_XFER_CPLT_CB_ID : + hsram->DmaXferCpltCallback = HAL_SRAM_DMA_XferCpltCallback; + break; + case HAL_SRAM_DMA_XFER_ERR_CB_ID : + hsram->DmaXferErrorCallback = HAL_SRAM_DMA_XferErrorCallback; + break; + default : + /* update return status */ + status = HAL_ERROR; + break; + } + } + else if (state == HAL_SRAM_STATE_RESET) + { + switch (CallbackId) + { + case HAL_SRAM_MSP_INIT_CB_ID : + hsram->MspInitCallback = HAL_SRAM_MspInit; + break; + case HAL_SRAM_MSP_DEINIT_CB_ID : + hsram->MspDeInitCallback = HAL_SRAM_MspDeInit; + break; + default : + /* update return status */ + status = HAL_ERROR; + break; + } + } + else + { + /* update return status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Register a User SRAM Callback for DMA transfers + * To be used to override the weak predefined callback + * @param hsram : SRAM handle + * @param CallbackId : ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_SRAM_DMA_XFER_CPLT_CB_ID SRAM DMA Xfer Complete callback ID + * @arg @ref HAL_SRAM_DMA_XFER_ERR_CB_ID SRAM DMA Xfer Error callback ID + * @param pCallback : pointer to the Callback function + * @retval status + */ +HAL_StatusTypeDef HAL_SRAM_RegisterDmaCallback(SRAM_HandleTypeDef *hsram, HAL_SRAM_CallbackIDTypeDef CallbackId, + pSRAM_DmaCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + HAL_SRAM_StateTypeDef state; + + if (pCallback == NULL) + { + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hsram); + + state = hsram->State; + if ((state == HAL_SRAM_STATE_READY) || (state == HAL_SRAM_STATE_PROTECTED)) + { + switch (CallbackId) + { + case HAL_SRAM_DMA_XFER_CPLT_CB_ID : + hsram->DmaXferCpltCallback = pCallback; + break; + case HAL_SRAM_DMA_XFER_ERR_CB_ID : + hsram->DmaXferErrorCallback = pCallback; + break; + default : + /* update return status */ + status = HAL_ERROR; + break; + } + } + else + { + /* update return status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hsram); + return status; +} +#endif /* USE_HAL_SRAM_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup SRAM_Exported_Functions_Group3 Control functions + * @brief Control functions + * +@verbatim + ============================================================================== + ##### SRAM Control functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to control dynamically + the SRAM interface. + +@endverbatim + * @{ + */ + +/** + * @brief Enables dynamically SRAM write operation. + * @param hsram pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SRAM_WriteOperation_Enable(SRAM_HandleTypeDef *hsram) +{ + /* Check the SRAM controller state */ + if (hsram->State == HAL_SRAM_STATE_PROTECTED) + { + /* Process Locked */ + __HAL_LOCK(hsram); + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_BUSY; + + /* Enable write operation */ + (void)FMC_NORSRAM_WriteOperation_Enable(hsram->Instance, hsram->Init.NSBank); + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hsram); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Disables dynamically SRAM write operation. + * @param hsram pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SRAM_WriteOperation_Disable(SRAM_HandleTypeDef *hsram) +{ + /* Check the SRAM controller state */ + if (hsram->State == HAL_SRAM_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hsram); + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_BUSY; + + /* Disable write operation */ + (void)FMC_NORSRAM_WriteOperation_Disable(hsram->Instance, hsram->Init.NSBank); + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_PROTECTED; + + /* Process unlocked */ + __HAL_UNLOCK(hsram); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup SRAM_Exported_Functions_Group4 Peripheral State functions + * @brief Peripheral State functions + * +@verbatim + ============================================================================== + ##### SRAM State functions ##### + ============================================================================== + [..] + This subsection permits to get in run-time the status of the SRAM controller + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Returns the SRAM controller state + * @param hsram pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @retval HAL state + */ +HAL_SRAM_StateTypeDef HAL_SRAM_GetState(const SRAM_HandleTypeDef *hsram) +{ + return hsram->State; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup SRAM_Private_Functions SRAM Private Functions + * @{ + */ + +/** + * @brief DMA SRAM process complete callback. + * @param hdma : DMA handle + * @retval None + */ +static void SRAM_DMACplt(DMA_HandleTypeDef *hdma) +{ + /* Derogation MISRAC2012-Rule-11.5 */ + SRAM_HandleTypeDef *hsram = (SRAM_HandleTypeDef *)(hdma->Parent); + + /* Disable the DMA channel */ + __HAL_DMA_DISABLE(hdma); + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_READY; + +#if (USE_HAL_SRAM_REGISTER_CALLBACKS == 1) + hsram->DmaXferCpltCallback(hdma); +#else + HAL_SRAM_DMA_XferCpltCallback(hdma); +#endif /* USE_HAL_SRAM_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA SRAM process complete callback. + * @param hdma : DMA handle + * @retval None + */ +static void SRAM_DMACpltProt(DMA_HandleTypeDef *hdma) +{ + /* Derogation MISRAC2012-Rule-11.5 */ + SRAM_HandleTypeDef *hsram = (SRAM_HandleTypeDef *)(hdma->Parent); + + /* Disable the DMA channel */ + __HAL_DMA_DISABLE(hdma); + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_PROTECTED; + +#if (USE_HAL_SRAM_REGISTER_CALLBACKS == 1) + hsram->DmaXferCpltCallback(hdma); +#else + HAL_SRAM_DMA_XferCpltCallback(hdma); +#endif /* USE_HAL_SRAM_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA SRAM error callback. + * @param hdma : DMA handle + * @retval None + */ +static void SRAM_DMAError(DMA_HandleTypeDef *hdma) +{ + /* Derogation MISRAC2012-Rule-11.5 */ + SRAM_HandleTypeDef *hsram = (SRAM_HandleTypeDef *)(hdma->Parent); + + /* Disable the DMA channel */ + __HAL_DMA_DISABLE(hdma); + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_ERROR; + +#if (USE_HAL_SRAM_REGISTER_CALLBACKS == 1) + hsram->DmaXferErrorCallback(hdma); +#else + HAL_SRAM_DMA_XferErrorCallback(hdma); +#endif /* USE_HAL_SRAM_REGISTER_CALLBACKS */ +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_SRAM_MODULE_ENABLED */ + +/** + * @} + */ + +#endif /* FMC_Bank1 || FSMC_Bank1 */ diff --git a/cubemx/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_uart.c b/cubemx/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_uart.c new file mode 100644 index 0000000..cf6d201 --- /dev/null +++ b/cubemx/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_uart.c @@ -0,0 +1,3807 @@ +/** + ****************************************************************************** + * @file stm32f4xx_hal_uart.c + * @author MCD Application Team + * @brief UART HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Universal Asynchronous Receiver Transmitter Peripheral (UART). + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral Control functions + * + Peripheral State and Errors functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The UART HAL driver can be used as follows: + + (#) Declare a UART_HandleTypeDef handle structure (eg. UART_HandleTypeDef huart). + (#) Initialize the UART low level resources by implementing the HAL_UART_MspInit() API: + (##) Enable the USARTx interface clock. + (##) UART pins configuration: + (+++) Enable the clock for the UART GPIOs. + (+++) Configure the UART TX/RX pins as alternate function pull-up. + (##) NVIC configuration if you need to use interrupt process (HAL_UART_Transmit_IT() + and HAL_UART_Receive_IT() APIs): + (+++) Configure the USARTx interrupt priority. + (+++) Enable the NVIC USART IRQ handle. + (##) DMA Configuration if you need to use DMA process (HAL_UART_Transmit_DMA() + and HAL_UART_Receive_DMA() APIs): + (+++) Declare a DMA handle structure for the Tx/Rx stream. + (+++) Enable the DMAx interface clock. + (+++) Configure the declared DMA handle structure with the required + Tx/Rx parameters. + (+++) Configure the DMA Tx/Rx stream. + (+++) Associate the initialized DMA handle to the UART DMA Tx/Rx handle. + (+++) Configure the priority and enable the NVIC for the transfer complete + interrupt on the DMA Tx/Rx stream. + (+++) Configure the USARTx interrupt priority and enable the NVIC USART IRQ handle + (used for last byte sending completion detection in DMA non circular mode) + + (#) Program the Baud Rate, Word Length, Stop Bit, Parity, Hardware + flow control and Mode(Receiver/Transmitter) in the huart Init structure. + + (#) For the UART asynchronous mode, initialize the UART registers by calling + the HAL_UART_Init() API. + + (#) For the UART Half duplex mode, initialize the UART registers by calling + the HAL_HalfDuplex_Init() API. + + (#) For the LIN mode, initialize the UART registers by calling the HAL_LIN_Init() API. + + (#) For the Multi-Processor mode, initialize the UART registers by calling + the HAL_MultiProcessor_Init() API. + + [..] + (@) The specific UART interrupts (Transmission complete interrupt, + RXNE interrupt and Error Interrupts) will be managed using the macros + __HAL_UART_ENABLE_IT() and __HAL_UART_DISABLE_IT() inside the transmit + and receive process. + + [..] + (@) These APIs (HAL_UART_Init() and HAL_HalfDuplex_Init()) configure also the + low level Hardware GPIO, CLOCK, CORTEX...etc) by calling the customized + HAL_UART_MspInit() API. + + ##### Callback registration ##### + ================================== + + [..] + The compilation define USE_HAL_UART_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + + [..] + Use Function HAL_UART_RegisterCallback() to register a user callback. + Function HAL_UART_RegisterCallback() allows to register following callbacks: + (+) TxHalfCpltCallback : Tx Half Complete Callback. + (+) TxCpltCallback : Tx Complete Callback. + (+) RxHalfCpltCallback : Rx Half Complete Callback. + (+) RxCpltCallback : Rx Complete Callback. + (+) ErrorCallback : Error Callback. + (+) AbortCpltCallback : Abort Complete Callback. + (+) AbortTransmitCpltCallback : Abort Transmit Complete Callback. + (+) AbortReceiveCpltCallback : Abort Receive Complete Callback. + (+) MspInitCallback : UART MspInit. + (+) MspDeInitCallback : UART MspDeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + [..] + Use function HAL_UART_UnRegisterCallback() to reset a callback to the default + weak (surcharged) function. + HAL_UART_UnRegisterCallback() takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) TxHalfCpltCallback : Tx Half Complete Callback. + (+) TxCpltCallback : Tx Complete Callback. + (+) RxHalfCpltCallback : Rx Half Complete Callback. + (+) RxCpltCallback : Rx Complete Callback. + (+) ErrorCallback : Error Callback. + (+) AbortCpltCallback : Abort Complete Callback. + (+) AbortTransmitCpltCallback : Abort Transmit Complete Callback. + (+) AbortReceiveCpltCallback : Abort Receive Complete Callback. + (+) MspInitCallback : UART MspInit. + (+) MspDeInitCallback : UART MspDeInit. + + [..] + For specific callback RxEventCallback, use dedicated registration/reset functions: + respectively HAL_UART_RegisterRxEventCallback() , HAL_UART_UnRegisterRxEventCallback(). + + [..] + By default, after the HAL_UART_Init() and when the state is HAL_UART_STATE_RESET + all callbacks are set to the corresponding weak (surcharged) functions: + examples HAL_UART_TxCpltCallback(), HAL_UART_RxHalfCpltCallback(). + Exception done for MspInit and MspDeInit functions that are respectively + reset to the legacy weak (surcharged) functions in the HAL_UART_Init() + and HAL_UART_DeInit() only when these callbacks are null (not registered beforehand). + If not, MspInit or MspDeInit are not null, the HAL_UART_Init() and HAL_UART_DeInit() + keep and use the user MspInit/MspDeInit callbacks (registered beforehand). + + [..] + Callbacks can be registered/unregistered in HAL_UART_STATE_READY state only. + Exception done MspInit/MspDeInit that can be registered/unregistered + in HAL_UART_STATE_READY or HAL_UART_STATE_RESET state, thus registered (user) + MspInit/DeInit callbacks can be used during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using HAL_UART_RegisterCallback() before calling HAL_UART_DeInit() + or HAL_UART_Init() function. + + [..] + When The compilation define USE_HAL_UART_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available + and weak (surcharged) callbacks are used. + + [..] + Three operation modes are available within this driver : + + *** Polling mode IO operation *** + ================================= + [..] + (+) Send an amount of data in blocking mode using HAL_UART_Transmit() + (+) Receive an amount of data in blocking mode using HAL_UART_Receive() + + *** Interrupt mode IO operation *** + =================================== + [..] + (+) Send an amount of data in non blocking mode using HAL_UART_Transmit_IT() + (+) At transmission end of transfer HAL_UART_TxCpltCallback is executed and user can + add his own code by customization of function pointer HAL_UART_TxCpltCallback + (+) Receive an amount of data in non blocking mode using HAL_UART_Receive_IT() + (+) At reception end of transfer HAL_UART_RxCpltCallback is executed and user can + add his own code by customization of function pointer HAL_UART_RxCpltCallback + (+) In case of transfer Error, HAL_UART_ErrorCallback() function is executed and user can + add his own code by customization of function pointer HAL_UART_ErrorCallback + + *** DMA mode IO operation *** + ============================== + [..] + (+) Send an amount of data in non blocking mode (DMA) using HAL_UART_Transmit_DMA() + (+) At transmission end of half transfer HAL_UART_TxHalfCpltCallback is executed and user can + add his own code by customization of function pointer HAL_UART_TxHalfCpltCallback + (+) At transmission end of transfer HAL_UART_TxCpltCallback is executed and user can + add his own code by customization of function pointer HAL_UART_TxCpltCallback + (+) Receive an amount of data in non blocking mode (DMA) using HAL_UART_Receive_DMA() + (+) At reception end of half transfer HAL_UART_RxHalfCpltCallback is executed and user can + add his own code by customization of function pointer HAL_UART_RxHalfCpltCallback + (+) At reception end of transfer HAL_UART_RxCpltCallback is executed and user can + add his own code by customization of function pointer HAL_UART_RxCpltCallback + (+) In case of transfer Error, HAL_UART_ErrorCallback() function is executed and user can + add his own code by customization of function pointer HAL_UART_ErrorCallback + (+) Pause the DMA Transfer using HAL_UART_DMAPause() + (+) Resume the DMA Transfer using HAL_UART_DMAResume() + (+) Stop the DMA Transfer using HAL_UART_DMAStop() + + + [..] This subsection also provides a set of additional functions providing enhanced reception + services to user. (For example, these functions allow application to handle use cases + where number of data to be received is unknown). + + (#) Compared to standard reception services which only consider number of received + data elements as reception completion criteria, these functions also consider additional events + as triggers for updating reception status to caller : + (+) Detection of inactivity period (RX line has not been active for a given period). + (++) RX inactivity detected by IDLE event, i.e. RX line has been in idle state (normally high state) + for 1 frame time, after last received byte. + + (#) There are two mode of transfer: + (+) Blocking mode: The reception is performed in polling mode, until either expected number of data is received, + or till IDLE event occurs. Reception is handled only during function execution. + When function exits, no data reception could occur. HAL status and number of actually received data elements, + are returned by function after finishing transfer. + (+) Non-Blocking mode: The reception is performed using Interrupts or DMA. + These API's return the HAL status. + The end of the data processing will be indicated through the + dedicated UART IRQ when using Interrupt mode or the DMA IRQ when using DMA mode. + The HAL_UARTEx_RxEventCallback() user callback will be executed during Receive process + The HAL_UART_ErrorCallback()user callback will be executed when a reception error is detected. + + (#) Blocking mode API: + (+) HAL_UARTEx_ReceiveToIdle() + + (#) Non-Blocking mode API with Interrupt: + (+) HAL_UARTEx_ReceiveToIdle_IT() + + (#) Non-Blocking mode API with DMA: + (+) HAL_UARTEx_ReceiveToIdle_DMA() + + + *** UART HAL driver macros list *** + ============================================= + [..] + Below the list of most used macros in UART HAL driver. + + (+) __HAL_UART_ENABLE: Enable the UART peripheral + (+) __HAL_UART_DISABLE: Disable the UART peripheral + (+) __HAL_UART_GET_FLAG : Check whether the specified UART flag is set or not + (+) __HAL_UART_CLEAR_FLAG : Clear the specified UART pending flag + (+) __HAL_UART_ENABLE_IT: Enable the specified UART interrupt + (+) __HAL_UART_DISABLE_IT: Disable the specified UART interrupt + (+) __HAL_UART_GET_IT_SOURCE: Check whether the specified UART interrupt has occurred or not + + [..] + (@) You can refer to the UART HAL driver header file for more useful macros + + @endverbatim + [..] + (@) Additional remark: If the parity is enabled, then the MSB bit of the data written + in the data register is transmitted but is changed by the parity bit. + Depending on the frame length defined by the M bit (8-bits or 9-bits), + the possible UART frame formats are as listed in the following table: + +-------------------------------------------------------------+ + | M bit | PCE bit | UART frame | + |---------------------|---------------------------------------| + | 0 | 0 | | SB | 8 bit data | STB | | + |---------|-----------|---------------------------------------| + | 0 | 1 | | SB | 7 bit data | PB | STB | | + |---------|-----------|---------------------------------------| + | 1 | 0 | | SB | 9 bit data | STB | | + |---------|-----------|---------------------------------------| + | 1 | 1 | | SB | 8 bit data | PB | STB | | + +-------------------------------------------------------------+ + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal.h" + +/** @addtogroup STM32F4xx_HAL_Driver + * @{ + */ + +/** @defgroup UART UART + * @brief HAL UART module driver + * @{ + */ +#ifdef HAL_UART_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @addtogroup UART_Private_Constants + * @{ + */ +/** + * @} + */ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @addtogroup UART_Private_Functions UART Private Functions + * @{ + */ + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) +void UART_InitCallbacksToDefault(UART_HandleTypeDef *huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +static void UART_EndTxTransfer(UART_HandleTypeDef *huart); +static void UART_EndRxTransfer(UART_HandleTypeDef *huart); +static void UART_DMATransmitCplt(DMA_HandleTypeDef *hdma); +static void UART_DMAReceiveCplt(DMA_HandleTypeDef *hdma); +static void UART_DMATxHalfCplt(DMA_HandleTypeDef *hdma); +static void UART_DMARxHalfCplt(DMA_HandleTypeDef *hdma); +static void UART_DMAError(DMA_HandleTypeDef *hdma); +static void UART_DMAAbortOnError(DMA_HandleTypeDef *hdma); +static void UART_DMATxAbortCallback(DMA_HandleTypeDef *hdma); +static void UART_DMARxAbortCallback(DMA_HandleTypeDef *hdma); +static void UART_DMATxOnlyAbortCallback(DMA_HandleTypeDef *hdma); +static void UART_DMARxOnlyAbortCallback(DMA_HandleTypeDef *hdma); +static HAL_StatusTypeDef UART_Transmit_IT(UART_HandleTypeDef *huart); +static HAL_StatusTypeDef UART_EndTransmit_IT(UART_HandleTypeDef *huart); +static HAL_StatusTypeDef UART_Receive_IT(UART_HandleTypeDef *huart); +static HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, uint32_t Flag, FlagStatus Status, + uint32_t Tickstart, uint32_t Timeout); +static void UART_SetConfig(UART_HandleTypeDef *huart); + +/** + * @} + */ + +/* Exported functions ---------------------------------------------------------*/ +/** @defgroup UART_Exported_Functions UART Exported Functions + * @{ + */ + +/** @defgroup UART_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and Configuration functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to initialize the USARTx or the UARTy + in asynchronous mode. + (+) For the asynchronous mode only these parameters can be configured: + (++) Baud Rate + (++) Word Length + (++) Stop Bit + (++) Parity: If the parity is enabled, then the MSB bit of the data written + in the data register is transmitted but is changed by the parity bit. + Depending on the frame length defined by the M bit (8-bits or 9-bits), + please refer to Reference manual for possible UART frame formats. + (++) Hardware flow control + (++) Receiver/transmitter modes + (++) Over Sampling Method + [..] + The HAL_UART_Init(), HAL_HalfDuplex_Init(), HAL_LIN_Init() and HAL_MultiProcessor_Init() APIs + follow respectively the UART asynchronous, UART Half duplex, LIN and Multi-Processor configuration + procedures (details for the procedures are available in reference manual + (RM0430 for STM32F4X3xx MCUs and RM0402 for STM32F412xx MCUs + RM0383 for STM32F411xC/E MCUs and RM0401 for STM32F410xx MCUs + RM0090 for STM32F4X5xx/STM32F4X7xx/STM32F429xx/STM32F439xx MCUs + RM0390 for STM32F446xx MCUs and RM0386 for STM32F469xx/STM32F479xx MCUs)). + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the UART mode according to the specified parameters in + * the UART_InitTypeDef and create the associated handle. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart) +{ + /* Check the UART handle allocation */ + if (huart == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + if (huart->Init.HwFlowCtl != UART_HWCONTROL_NONE) + { + /* The hardware flow control is available only for USART1, USART2, USART3 and USART6. + Except for STM32F446xx devices, that is available for USART1, USART2, USART3, USART6, UART4 and UART5. + */ + assert_param(IS_UART_HWFLOW_INSTANCE(huart->Instance)); + assert_param(IS_UART_HARDWARE_FLOW_CONTROL(huart->Init.HwFlowCtl)); + } + else + { + assert_param(IS_UART_INSTANCE(huart->Instance)); + } + assert_param(IS_UART_WORD_LENGTH(huart->Init.WordLength)); + assert_param(IS_UART_OVERSAMPLING(huart->Init.OverSampling)); + + if (huart->gState == HAL_UART_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + huart->Lock = HAL_UNLOCKED; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + UART_InitCallbacksToDefault(huart); + + if (huart->MspInitCallback == NULL) + { + huart->MspInitCallback = HAL_UART_MspInit; + } + + /* Init the low level hardware */ + huart->MspInitCallback(huart); +#else + /* Init the low level hardware : GPIO, CLOCK */ + HAL_UART_MspInit(huart); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + + huart->gState = HAL_UART_STATE_BUSY; + + /* Disable the peripheral */ + __HAL_UART_DISABLE(huart); + + /* Set the UART Communication parameters */ + UART_SetConfig(huart); + + /* In asynchronous mode, the following bits must be kept cleared: + - LINEN and CLKEN bits in the USART_CR2 register, + - SCEN, HDSEL and IREN bits in the USART_CR3 register.*/ + CLEAR_BIT(huart->Instance->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); + CLEAR_BIT(huart->Instance->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN)); + + /* Enable the peripheral */ + __HAL_UART_ENABLE(huart); + + /* Initialize the UART state */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->gState = HAL_UART_STATE_READY; + huart->RxState = HAL_UART_STATE_READY; + huart->RxEventType = HAL_UART_RXEVENT_TC; + + return HAL_OK; +} + +/** + * @brief Initializes the half-duplex mode according to the specified + * parameters in the UART_InitTypeDef and create the associated handle. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart) +{ + /* Check the UART handle allocation */ + if (huart == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_UART_HALFDUPLEX_INSTANCE(huart->Instance)); + assert_param(IS_UART_WORD_LENGTH(huart->Init.WordLength)); + assert_param(IS_UART_OVERSAMPLING(huart->Init.OverSampling)); + + if (huart->gState == HAL_UART_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + huart->Lock = HAL_UNLOCKED; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + UART_InitCallbacksToDefault(huart); + + if (huart->MspInitCallback == NULL) + { + huart->MspInitCallback = HAL_UART_MspInit; + } + + /* Init the low level hardware */ + huart->MspInitCallback(huart); +#else + /* Init the low level hardware : GPIO, CLOCK */ + HAL_UART_MspInit(huart); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + + huart->gState = HAL_UART_STATE_BUSY; + + /* Disable the peripheral */ + __HAL_UART_DISABLE(huart); + + /* Set the UART Communication parameters */ + UART_SetConfig(huart); + + /* In half-duplex mode, the following bits must be kept cleared: + - LINEN and CLKEN bits in the USART_CR2 register, + - SCEN and IREN bits in the USART_CR3 register.*/ + CLEAR_BIT(huart->Instance->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); + CLEAR_BIT(huart->Instance->CR3, (USART_CR3_IREN | USART_CR3_SCEN)); + + /* Enable the Half-Duplex mode by setting the HDSEL bit in the CR3 register */ + SET_BIT(huart->Instance->CR3, USART_CR3_HDSEL); + + /* Enable the peripheral */ + __HAL_UART_ENABLE(huart); + + /* Initialize the UART state*/ + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->gState = HAL_UART_STATE_READY; + huart->RxState = HAL_UART_STATE_READY; + huart->RxEventType = HAL_UART_RXEVENT_TC; + + return HAL_OK; +} + +/** + * @brief Initializes the LIN mode according to the specified + * parameters in the UART_InitTypeDef and create the associated handle. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @param BreakDetectLength Specifies the LIN break detection length. + * This parameter can be one of the following values: + * @arg UART_LINBREAKDETECTLENGTH_10B: 10-bit break detection + * @arg UART_LINBREAKDETECTLENGTH_11B: 11-bit break detection + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength) +{ + /* Check the UART handle allocation */ + if (huart == NULL) + { + return HAL_ERROR; + } + + /* Check the LIN UART instance */ + assert_param(IS_UART_LIN_INSTANCE(huart->Instance)); + + /* Check the Break detection length parameter */ + assert_param(IS_UART_LIN_BREAK_DETECT_LENGTH(BreakDetectLength)); + assert_param(IS_UART_LIN_WORD_LENGTH(huart->Init.WordLength)); + assert_param(IS_UART_LIN_OVERSAMPLING(huart->Init.OverSampling)); + + if (huart->gState == HAL_UART_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + huart->Lock = HAL_UNLOCKED; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + UART_InitCallbacksToDefault(huart); + + if (huart->MspInitCallback == NULL) + { + huart->MspInitCallback = HAL_UART_MspInit; + } + + /* Init the low level hardware */ + huart->MspInitCallback(huart); +#else + /* Init the low level hardware : GPIO, CLOCK */ + HAL_UART_MspInit(huart); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + + huart->gState = HAL_UART_STATE_BUSY; + + /* Disable the peripheral */ + __HAL_UART_DISABLE(huart); + + /* Set the UART Communication parameters */ + UART_SetConfig(huart); + + /* In LIN mode, the following bits must be kept cleared: + - CLKEN bits in the USART_CR2 register, + - SCEN, HDSEL and IREN bits in the USART_CR3 register.*/ + CLEAR_BIT(huart->Instance->CR2, (USART_CR2_CLKEN)); + CLEAR_BIT(huart->Instance->CR3, (USART_CR3_HDSEL | USART_CR3_IREN | USART_CR3_SCEN)); + + /* Enable the LIN mode by setting the LINEN bit in the CR2 register */ + SET_BIT(huart->Instance->CR2, USART_CR2_LINEN); + + /* Set the USART LIN Break detection length. */ + CLEAR_BIT(huart->Instance->CR2, USART_CR2_LBDL); + SET_BIT(huart->Instance->CR2, BreakDetectLength); + + /* Enable the peripheral */ + __HAL_UART_ENABLE(huart); + + /* Initialize the UART state*/ + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->gState = HAL_UART_STATE_READY; + huart->RxState = HAL_UART_STATE_READY; + huart->RxEventType = HAL_UART_RXEVENT_TC; + + return HAL_OK; +} + +/** + * @brief Initializes the Multi-Processor mode according to the specified + * parameters in the UART_InitTypeDef and create the associated handle. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @param Address USART address + * @param WakeUpMethod specifies the USART wake-up method. + * This parameter can be one of the following values: + * @arg UART_WAKEUPMETHOD_IDLELINE: Wake-up by an idle line detection + * @arg UART_WAKEUPMETHOD_ADDRESSMARK: Wake-up by an address mark + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethod) +{ + /* Check the UART handle allocation */ + if (huart == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_UART_INSTANCE(huart->Instance)); + + /* Check the Address & wake up method parameters */ + assert_param(IS_UART_WAKEUPMETHOD(WakeUpMethod)); + assert_param(IS_UART_ADDRESS(Address)); + assert_param(IS_UART_WORD_LENGTH(huart->Init.WordLength)); + assert_param(IS_UART_OVERSAMPLING(huart->Init.OverSampling)); + + if (huart->gState == HAL_UART_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + huart->Lock = HAL_UNLOCKED; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + UART_InitCallbacksToDefault(huart); + + if (huart->MspInitCallback == NULL) + { + huart->MspInitCallback = HAL_UART_MspInit; + } + + /* Init the low level hardware */ + huart->MspInitCallback(huart); +#else + /* Init the low level hardware : GPIO, CLOCK */ + HAL_UART_MspInit(huart); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + + huart->gState = HAL_UART_STATE_BUSY; + + /* Disable the peripheral */ + __HAL_UART_DISABLE(huart); + + /* Set the UART Communication parameters */ + UART_SetConfig(huart); + + /* In Multi-Processor mode, the following bits must be kept cleared: + - LINEN and CLKEN bits in the USART_CR2 register, + - SCEN, HDSEL and IREN bits in the USART_CR3 register */ + CLEAR_BIT(huart->Instance->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); + CLEAR_BIT(huart->Instance->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN)); + + /* Set the USART address node */ + CLEAR_BIT(huart->Instance->CR2, USART_CR2_ADD); + SET_BIT(huart->Instance->CR2, Address); + + /* Set the wake up method by setting the WAKE bit in the CR1 register */ + CLEAR_BIT(huart->Instance->CR1, USART_CR1_WAKE); + SET_BIT(huart->Instance->CR1, WakeUpMethod); + + /* Enable the peripheral */ + __HAL_UART_ENABLE(huart); + + /* Initialize the UART state */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->gState = HAL_UART_STATE_READY; + huart->RxState = HAL_UART_STATE_READY; + huart->RxEventType = HAL_UART_RXEVENT_TC; + + return HAL_OK; +} + +/** + * @brief DeInitializes the UART peripheral. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_DeInit(UART_HandleTypeDef *huart) +{ + /* Check the UART handle allocation */ + if (huart == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_UART_INSTANCE(huart->Instance)); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Disable the Peripheral */ + __HAL_UART_DISABLE(huart); + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + if (huart->MspDeInitCallback == NULL) + { + huart->MspDeInitCallback = HAL_UART_MspDeInit; + } + /* DeInit the low level hardware */ + huart->MspDeInitCallback(huart); +#else + /* DeInit the low level hardware */ + HAL_UART_MspDeInit(huart); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->gState = HAL_UART_STATE_RESET; + huart->RxState = HAL_UART_STATE_RESET; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + huart->RxEventType = HAL_UART_RXEVENT_TC; + + /* Process Unlock */ + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief UART MSP Init. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval None + */ +__weak void HAL_UART_MspInit(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_UART_MspInit could be implemented in the user file + */ +} + +/** + * @brief UART MSP DeInit. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval None + */ +__weak void HAL_UART_MspDeInit(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_UART_MspDeInit could be implemented in the user file + */ +} + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User UART Callback + * To be used instead of the weak predefined callback + * @note The HAL_UART_RegisterCallback() may be called before HAL_UART_Init(), HAL_HalfDuplex_Init(), HAL_LIN_Init(), + * HAL_MultiProcessor_Init() to register callbacks for HAL_UART_MSPINIT_CB_ID and HAL_UART_MSPDEINIT_CB_ID + * @param huart uart handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_UART_TX_HALFCOMPLETE_CB_ID Tx Half Complete Callback ID + * @arg @ref HAL_UART_TX_COMPLETE_CB_ID Tx Complete Callback ID + * @arg @ref HAL_UART_RX_HALFCOMPLETE_CB_ID Rx Half Complete Callback ID + * @arg @ref HAL_UART_RX_COMPLETE_CB_ID Rx Complete Callback ID + * @arg @ref HAL_UART_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_UART_ABORT_COMPLETE_CB_ID Abort Complete Callback ID + * @arg @ref HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID Abort Transmit Complete Callback ID + * @arg @ref HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID Abort Receive Complete Callback ID + * @arg @ref HAL_UART_MSPINIT_CB_ID MspInit Callback ID + * @arg @ref HAL_UART_MSPDEINIT_CB_ID MspDeInit Callback ID + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_RegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID, + pUART_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + if (huart->gState == HAL_UART_STATE_READY) + { + switch (CallbackID) + { + case HAL_UART_TX_HALFCOMPLETE_CB_ID : + huart->TxHalfCpltCallback = pCallback; + break; + + case HAL_UART_TX_COMPLETE_CB_ID : + huart->TxCpltCallback = pCallback; + break; + + case HAL_UART_RX_HALFCOMPLETE_CB_ID : + huart->RxHalfCpltCallback = pCallback; + break; + + case HAL_UART_RX_COMPLETE_CB_ID : + huart->RxCpltCallback = pCallback; + break; + + case HAL_UART_ERROR_CB_ID : + huart->ErrorCallback = pCallback; + break; + + case HAL_UART_ABORT_COMPLETE_CB_ID : + huart->AbortCpltCallback = pCallback; + break; + + case HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID : + huart->AbortTransmitCpltCallback = pCallback; + break; + + case HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID : + huart->AbortReceiveCpltCallback = pCallback; + break; + + case HAL_UART_MSPINIT_CB_ID : + huart->MspInitCallback = pCallback; + break; + + case HAL_UART_MSPDEINIT_CB_ID : + huart->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (huart->gState == HAL_UART_STATE_RESET) + { + switch (CallbackID) + { + case HAL_UART_MSPINIT_CB_ID : + huart->MspInitCallback = pCallback; + break; + + case HAL_UART_MSPDEINIT_CB_ID : + huart->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Unregister an UART Callback + * UART callaback is redirected to the weak predefined callback + * @note The HAL_UART_UnRegisterCallback() may be called before HAL_UART_Init(), HAL_HalfDuplex_Init(), + * HAL_LIN_Init(), HAL_MultiProcessor_Init() to un-register callbacks for HAL_UART_MSPINIT_CB_ID + * and HAL_UART_MSPDEINIT_CB_ID + * @param huart uart handle + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_UART_TX_HALFCOMPLETE_CB_ID Tx Half Complete Callback ID + * @arg @ref HAL_UART_TX_COMPLETE_CB_ID Tx Complete Callback ID + * @arg @ref HAL_UART_RX_HALFCOMPLETE_CB_ID Rx Half Complete Callback ID + * @arg @ref HAL_UART_RX_COMPLETE_CB_ID Rx Complete Callback ID + * @arg @ref HAL_UART_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_UART_ABORT_COMPLETE_CB_ID Abort Complete Callback ID + * @arg @ref HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID Abort Transmit Complete Callback ID + * @arg @ref HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID Abort Receive Complete Callback ID + * @arg @ref HAL_UART_MSPINIT_CB_ID MspInit Callback ID + * @arg @ref HAL_UART_MSPDEINIT_CB_ID MspDeInit Callback ID + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_UnRegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (HAL_UART_STATE_READY == huart->gState) + { + switch (CallbackID) + { + case HAL_UART_TX_HALFCOMPLETE_CB_ID : + huart->TxHalfCpltCallback = HAL_UART_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */ + break; + + case HAL_UART_TX_COMPLETE_CB_ID : + huart->TxCpltCallback = HAL_UART_TxCpltCallback; /* Legacy weak TxCpltCallback */ + break; + + case HAL_UART_RX_HALFCOMPLETE_CB_ID : + huart->RxHalfCpltCallback = HAL_UART_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ + break; + + case HAL_UART_RX_COMPLETE_CB_ID : + huart->RxCpltCallback = HAL_UART_RxCpltCallback; /* Legacy weak RxCpltCallback */ + break; + + case HAL_UART_ERROR_CB_ID : + huart->ErrorCallback = HAL_UART_ErrorCallback; /* Legacy weak ErrorCallback */ + break; + + case HAL_UART_ABORT_COMPLETE_CB_ID : + huart->AbortCpltCallback = HAL_UART_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + break; + + case HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID : + huart->AbortTransmitCpltCallback = HAL_UART_AbortTransmitCpltCallback; /* Legacy weak AbortTransmitCpltCallback */ + break; + + case HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID : + huart->AbortReceiveCpltCallback = HAL_UART_AbortReceiveCpltCallback; /* Legacy weak AbortReceiveCpltCallback */ + break; + + case HAL_UART_MSPINIT_CB_ID : + huart->MspInitCallback = HAL_UART_MspInit; /* Legacy weak MspInitCallback */ + break; + + case HAL_UART_MSPDEINIT_CB_ID : + huart->MspDeInitCallback = HAL_UART_MspDeInit; /* Legacy weak MspDeInitCallback */ + break; + + default : + /* Update the error code */ + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_UART_STATE_RESET == huart->gState) + { + switch (CallbackID) + { + case HAL_UART_MSPINIT_CB_ID : + huart->MspInitCallback = HAL_UART_MspInit; + break; + + case HAL_UART_MSPDEINIT_CB_ID : + huart->MspDeInitCallback = HAL_UART_MspDeInit; + break; + + default : + /* Update the error code */ + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Register a User UART Rx Event Callback + * To be used instead of the weak predefined callback + * @param huart Uart handle + * @param pCallback Pointer to the Rx Event Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_RegisterRxEventCallback(UART_HandleTypeDef *huart, pUART_RxEventCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(huart); + + if (huart->gState == HAL_UART_STATE_READY) + { + huart->RxEventCallback = pCallback; + } + else + { + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(huart); + + return status; +} + +/** + * @brief UnRegister the UART Rx Event Callback + * UART Rx Event Callback is redirected to the weak HAL_UARTEx_RxEventCallback() predefined callback + * @param huart Uart handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_UnRegisterRxEventCallback(UART_HandleTypeDef *huart) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(huart); + + if (huart->gState == HAL_UART_STATE_READY) + { + huart->RxEventCallback = HAL_UARTEx_RxEventCallback; /* Legacy weak UART Rx Event Callback */ + } + else + { + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(huart); + return status; +} +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup UART_Exported_Functions_Group2 IO operation functions + * @brief UART Transmit and Receive functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + This subsection provides a set of functions allowing to manage the UART asynchronous + and Half duplex data transfers. + + (#) There are two modes of transfer: + (+) Blocking mode: The communication is performed in polling mode. + The HAL status of all data processing is returned by the same function + after finishing transfer. + (+) Non-Blocking mode: The communication is performed using Interrupts + or DMA, these API's return the HAL status. + The end of the data processing will be indicated through the + dedicated UART IRQ when using Interrupt mode or the DMA IRQ when + using DMA mode. + The HAL_UART_TxCpltCallback(), HAL_UART_RxCpltCallback() user callbacks + will be executed respectively at the end of the transmit or receive process + The HAL_UART_ErrorCallback()user callback will be executed when a communication error is detected. + + (#) Blocking mode API's are : + (+) HAL_UART_Transmit() + (+) HAL_UART_Receive() + + (#) Non-Blocking mode API's with Interrupt are : + (+) HAL_UART_Transmit_IT() + (+) HAL_UART_Receive_IT() + (+) HAL_UART_IRQHandler() + + (#) Non-Blocking mode API's with DMA are : + (+) HAL_UART_Transmit_DMA() + (+) HAL_UART_Receive_DMA() + (+) HAL_UART_DMAPause() + (+) HAL_UART_DMAResume() + (+) HAL_UART_DMAStop() + + (#) A set of Transfer Complete Callbacks are provided in Non_Blocking mode: + (+) HAL_UART_TxHalfCpltCallback() + (+) HAL_UART_TxCpltCallback() + (+) HAL_UART_RxHalfCpltCallback() + (+) HAL_UART_RxCpltCallback() + (+) HAL_UART_ErrorCallback() + + (#) Non-Blocking mode transfers could be aborted using Abort API's : + (+) HAL_UART_Abort() + (+) HAL_UART_AbortTransmit() + (+) HAL_UART_AbortReceive() + (+) HAL_UART_Abort_IT() + (+) HAL_UART_AbortTransmit_IT() + (+) HAL_UART_AbortReceive_IT() + + (#) For Abort services based on interrupts (HAL_UART_Abortxxx_IT), a set of Abort Complete Callbacks are provided: + (+) HAL_UART_AbortCpltCallback() + (+) HAL_UART_AbortTransmitCpltCallback() + (+) HAL_UART_AbortReceiveCpltCallback() + + (#) A Rx Event Reception Callback (Rx event notification) is available for Non_Blocking modes of enhanced reception services: + (+) HAL_UARTEx_RxEventCallback() + + (#) In Non-Blocking mode transfers, possible errors are split into 2 categories. + Errors are handled as follows : + (+) Error is considered as Recoverable and non blocking : Transfer could go till end, but error severity is + to be evaluated by user : this concerns Frame Error, Parity Error or Noise Error in Interrupt mode reception . + Received character is then retrieved and stored in Rx buffer, Error code is set to allow user to identify error type, + and HAL_UART_ErrorCallback() user callback is executed. Transfer is kept ongoing on UART side. + If user wants to abort it, Abort services should be called by user. + (+) Error is considered as Blocking : Transfer could not be completed properly and is aborted. + This concerns Overrun Error In Interrupt mode reception and all errors in DMA mode. + Error code is set to allow user to identify error type, and HAL_UART_ErrorCallback() user callback is executed. + + -@- In the Half duplex communication, it is forbidden to run the transmit + and receive process in parallel, the UART state HAL_UART_STATE_BUSY_TX_RX can't be useful. + +@endverbatim + * @{ + */ + +/** + * @brief Sends an amount of data in blocking mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data is handled as a set of u16. In this case, Size must indicate the number + * of u16 provided through pData. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + const uint8_t *pdata8bits; + const uint16_t *pdata16bits; + uint32_t tickstart = 0U; + + /* Check that a Tx process is not already ongoing */ + if (huart->gState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->gState = HAL_UART_STATE_BUSY_TX; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + huart->TxXferSize = Size; + huart->TxXferCount = Size; + + /* In case of 9bits/No Parity transfer, pData needs to be handled as a uint16_t pointer */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + pdata8bits = NULL; + pdata16bits = (const uint16_t *) pData; + } + else + { + pdata8bits = pData; + pdata16bits = NULL; + } + + while (huart->TxXferCount > 0U) + { + if (UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK) + { + huart->gState = HAL_UART_STATE_READY; + + return HAL_TIMEOUT; + } + if (pdata8bits == NULL) + { + huart->Instance->DR = (uint16_t)(*pdata16bits & 0x01FFU); + pdata16bits++; + } + else + { + huart->Instance->DR = (uint8_t)(*pdata8bits & 0xFFU); + pdata8bits++; + } + huart->TxXferCount--; + } + + if (UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_TC, RESET, tickstart, Timeout) != HAL_OK) + { + huart->gState = HAL_UART_STATE_READY; + + return HAL_TIMEOUT; + } + + /* At end of Tx process, restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receives an amount of data in blocking mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of u16. In this case, Size must indicate the number + * of u16 available through pData. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be received. + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint8_t *pdata8bits; + uint16_t *pdata16bits; + uint32_t tickstart = 0U; + + /* Check that a Rx process is not already ongoing */ + if (huart->RxState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->RxState = HAL_UART_STATE_BUSY_RX; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + huart->RxXferSize = Size; + huart->RxXferCount = Size; + + /* In case of 9bits/No Parity transfer, pRxData needs to be handled as a uint16_t pointer */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + pdata8bits = NULL; + pdata16bits = (uint16_t *) pData; + } + else + { + pdata8bits = pData; + pdata16bits = NULL; + } + + /* Check the remain data to be received */ + while (huart->RxXferCount > 0U) + { + if (UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_RXNE, RESET, tickstart, Timeout) != HAL_OK) + { + huart->RxState = HAL_UART_STATE_READY; + + return HAL_TIMEOUT; + } + if (pdata8bits == NULL) + { + *pdata16bits = (uint16_t)(huart->Instance->DR & 0x01FF); + pdata16bits++; + } + else + { + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) || ((huart->Init.WordLength == UART_WORDLENGTH_8B) && (huart->Init.Parity == UART_PARITY_NONE))) + { + *pdata8bits = (uint8_t)(huart->Instance->DR & (uint8_t)0x00FF); + } + else + { + *pdata8bits = (uint8_t)(huart->Instance->DR & (uint8_t)0x007F); + } + pdata8bits++; + } + huart->RxXferCount--; + } + + /* At end of Rx process, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Sends an amount of data in non blocking mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data is handled as a set of u16. In this case, Size must indicate the number + * of u16 provided through pData. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size) +{ + /* Check that a Tx process is not already ongoing */ + if (huart->gState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + huart->pTxBuffPtr = pData; + huart->TxXferSize = Size; + huart->TxXferCount = Size; + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->gState = HAL_UART_STATE_BUSY_TX; + + /* Enable the UART Transmit data register empty Interrupt */ + __HAL_UART_ENABLE_IT(huart, UART_IT_TXE); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receives an amount of data in non blocking mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of u16. In this case, Size must indicate the number + * of u16 available through pData. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be received. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +{ + /* Check that a Rx process is not already ongoing */ + if (huart->RxState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Set Reception type to Standard reception */ + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + return (UART_Start_Receive_IT(huart, pData, Size)); + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Sends an amount of data in DMA mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data is handled as a set of u16. In this case, Size must indicate the number + * of u16 provided through pData. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size) +{ + const uint32_t *tmp; + + /* Check that a Tx process is not already ongoing */ + if (huart->gState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + huart->pTxBuffPtr = pData; + huart->TxXferSize = Size; + huart->TxXferCount = Size; + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->gState = HAL_UART_STATE_BUSY_TX; + + /* Set the UART DMA transfer complete callback */ + huart->hdmatx->XferCpltCallback = UART_DMATransmitCplt; + + /* Set the UART DMA Half transfer complete callback */ + huart->hdmatx->XferHalfCpltCallback = UART_DMATxHalfCplt; + + /* Set the DMA error callback */ + huart->hdmatx->XferErrorCallback = UART_DMAError; + + /* Set the DMA abort callback */ + huart->hdmatx->XferAbortCallback = NULL; + + /* Enable the UART transmit DMA stream */ + tmp = (const uint32_t *)&pData; + if (HAL_DMA_Start_IT(huart->hdmatx, *(const uint32_t *)tmp, (uint32_t)&huart->Instance->DR, Size) != HAL_OK) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + /* Restore huart->gState to ready */ + huart->gState = HAL_UART_STATE_READY; + + return HAL_ERROR; + } + /* Clear the TC flag in the SR register by writing 0 to it */ + __HAL_UART_CLEAR_FLAG(huart, UART_FLAG_TC); + + /* Enable the DMA transfer for transmit request by setting the DMAT bit + in the UART CR3 register */ + ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receives an amount of data in DMA mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of u16. In this case, Size must indicate the number + * of u16 available through pData. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be received. + * @note When the UART parity is enabled (PCE = 1) the received data contains the parity bit. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +{ + /* Check that a Rx process is not already ongoing */ + if (huart->RxState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Set Reception type to Standard reception */ + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + return (UART_Start_Receive_DMA(huart, pData, Size)); + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Pauses the DMA Transfer. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart) +{ + uint32_t dmarequest = 0x00U; + + dmarequest = HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT); + if ((huart->gState == HAL_UART_STATE_BUSY_TX) && dmarequest) + { + /* Disable the UART DMA Tx request */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + } + + dmarequest = HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR); + if ((huart->RxState == HAL_UART_STATE_BUSY_RX) && dmarequest) + { + /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Disable the UART DMA Rx request */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + } + + return HAL_OK; +} + +/** + * @brief Resumes the DMA Transfer. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart) +{ + + if (huart->gState == HAL_UART_STATE_BUSY_TX) + { + /* Enable the UART DMA Tx request */ + ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_DMAT); + } + + if (huart->RxState == HAL_UART_STATE_BUSY_RX) + { + /* Clear the Overrun flag before resuming the Rx transfer*/ + __HAL_UART_CLEAR_OREFLAG(huart); + + /* Re-enable PE and ERR (Frame error, noise error, overrun error) interrupts */ + if (huart->Init.Parity != UART_PARITY_NONE) + { + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_PEIE); + } + ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Enable the UART DMA Rx request */ + ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_DMAR); + } + + return HAL_OK; +} + +/** + * @brief Stops the DMA Transfer. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart) +{ + uint32_t dmarequest = 0x00U; + /* The Lock is not implemented on this API to allow the user application + to call the HAL UART API under callbacks HAL_UART_TxCpltCallback() / HAL_UART_RxCpltCallback(): + when calling HAL_DMA_Abort() API the DMA TX/RX Transfer complete interrupt is generated + and the correspond call back is executed HAL_UART_TxCpltCallback() / HAL_UART_RxCpltCallback() + */ + + /* Stop UART DMA Tx request if ongoing */ + dmarequest = HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT); + if ((huart->gState == HAL_UART_STATE_BUSY_TX) && dmarequest) + { + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + /* Abort the UART DMA Tx stream */ + if (huart->hdmatx != NULL) + { + HAL_DMA_Abort(huart->hdmatx); + } + UART_EndTxTransfer(huart); + } + + /* Stop UART DMA Rx request if ongoing */ + dmarequest = HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR); + if ((huart->RxState == HAL_UART_STATE_BUSY_RX) && dmarequest) + { + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the UART DMA Rx stream */ + if (huart->hdmarx != NULL) + { + HAL_DMA_Abort(huart->hdmarx); + } + UART_EndRxTransfer(huart); + } + + return HAL_OK; +} + +/** + * @brief Receive an amount of data in blocking mode till either the expected number of data is received or an IDLE event occurs. + * @note HAL_OK is returned if reception is completed (expected number of data has been received) + * or if reception is stopped after IDLE event (less than the expected number of data has been received) + * In this case, RxLen output parameter indicates number of data available in reception buffer. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M = 01), + * the received data is handled as a set of uint16_t. In this case, Size must indicate the number + * of uint16_t available through pData. + * @param huart UART handle. + * @param pData Pointer to data buffer (uint8_t or uint16_t data elements). + * @param Size Amount of data elements (uint8_t or uint16_t) to be received. + * @param RxLen Number of data elements finally received (could be lower than Size, in case reception ends on IDLE event) + * @param Timeout Timeout duration expressed in ms (covers the whole reception sequence). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint16_t *RxLen, + uint32_t Timeout) +{ + uint8_t *pdata8bits; + uint16_t *pdata16bits; + uint32_t tickstart; + + /* Check that a Rx process is not already ongoing */ + if (huart->RxState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->RxState = HAL_UART_STATE_BUSY_RX; + huart->ReceptionType = HAL_UART_RECEPTION_TOIDLE; + huart->RxEventType = HAL_UART_RXEVENT_TC; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + huart->RxXferSize = Size; + huart->RxXferCount = Size; + + /* In case of 9bits/No Parity transfer, pRxData needs to be handled as a uint16_t pointer */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + pdata8bits = NULL; + pdata16bits = (uint16_t *) pData; + } + else + { + pdata8bits = pData; + pdata16bits = NULL; + } + + /* Initialize output number of received elements */ + *RxLen = 0U; + + /* as long as data have to be received */ + while (huart->RxXferCount > 0U) + { + /* Check if IDLE flag is set */ + if (__HAL_UART_GET_FLAG(huart, UART_FLAG_IDLE)) + { + /* Clear IDLE flag in ISR */ + __HAL_UART_CLEAR_IDLEFLAG(huart); + + /* If Set, but no data ever received, clear flag without exiting loop */ + /* If Set, and data has already been received, this means Idle Event is valid : End reception */ + if (*RxLen > 0U) + { + huart->RxEventType = HAL_UART_RXEVENT_IDLE; + huart->RxState = HAL_UART_STATE_READY; + + return HAL_OK; + } + } + + /* Check if RXNE flag is set */ + if (__HAL_UART_GET_FLAG(huart, UART_FLAG_RXNE)) + { + if (pdata8bits == NULL) + { + *pdata16bits = (uint16_t)(huart->Instance->DR & (uint16_t)0x01FF); + pdata16bits++; + } + else + { + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) || ((huart->Init.WordLength == UART_WORDLENGTH_8B) && (huart->Init.Parity == UART_PARITY_NONE))) + { + *pdata8bits = (uint8_t)(huart->Instance->DR & (uint8_t)0x00FF); + } + else + { + *pdata8bits = (uint8_t)(huart->Instance->DR & (uint8_t)0x007F); + } + + pdata8bits++; + } + /* Increment number of received elements */ + *RxLen += 1U; + huart->RxXferCount--; + } + + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + huart->RxState = HAL_UART_STATE_READY; + + return HAL_TIMEOUT; + } + } + } + + /* Set number of received elements in output parameter : RxLen */ + *RxLen = huart->RxXferSize - huart->RxXferCount; + /* At end of Rx process, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in interrupt mode till either the expected number of data is received or an IDLE event occurs. + * @note Reception is initiated by this function call. Further progress of reception is achieved thanks + * to UART interrupts raised by RXNE and IDLE events. Callback is called at end of reception indicating + * number of received data elements. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M = 01), + * the received data is handled as a set of uint16_t. In this case, Size must indicate the number + * of uint16_t available through pData. + * @param huart UART handle. + * @param pData Pointer to data buffer (uint8_t or uint16_t data elements). + * @param Size Amount of data elements (uint8_t or uint16_t) to be received. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef status; + + /* Check that a Rx process is not already ongoing */ + if (huart->RxState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Set Reception type to reception till IDLE Event*/ + huart->ReceptionType = HAL_UART_RECEPTION_TOIDLE; + huart->RxEventType = HAL_UART_RXEVENT_TC; + + status = UART_Start_Receive_IT(huart, pData, Size); + + /* Check Rx process has been successfully started */ + if (status == HAL_OK) + { + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + __HAL_UART_CLEAR_IDLEFLAG(huart); + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + } + else + { + /* In case of errors already pending when reception is started, + Interrupts may have already been raised and lead to reception abortion. + (Overrun error for instance). + In such case Reception Type has been reset to HAL_UART_RECEPTION_STANDARD. */ + status = HAL_ERROR; + } + } + + return status; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in DMA mode till either the expected number of data is received or an IDLE event occurs. + * @note Reception is initiated by this function call. Further progress of reception is achieved thanks + * to DMA services, transferring automatically received data elements in user reception buffer and + * calling registered callbacks at half/end of reception. UART IDLE events are also used to consider + * reception phase as ended. In all cases, callback execution will indicate number of received data elements. + * @note When the UART parity is enabled (PCE = 1), the received data contain + * the parity bit (MSB position). + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M = 01), + * the received data is handled as a set of uint16_t. In this case, Size must indicate the number + * of uint16_t available through pData. + * @param huart UART handle. + * @param pData Pointer to data buffer (uint8_t or uint16_t data elements). + * @param Size Amount of data elements (uint8_t or uint16_t) to be received. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef status; + + /* Check that a Rx process is not already ongoing */ + if (huart->RxState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Set Reception type to reception till IDLE Event*/ + huart->ReceptionType = HAL_UART_RECEPTION_TOIDLE; + huart->RxEventType = HAL_UART_RXEVENT_TC; + + status = UART_Start_Receive_DMA(huart, pData, Size); + + /* Check Rx process has been successfully started */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + __HAL_UART_CLEAR_IDLEFLAG(huart); + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + } + else + { + /* In case of errors already pending when reception is started, + Interrupts may have already been raised and lead to reception abortion. + (Overrun error for instance). + In such case Reception Type has been reset to HAL_UART_RECEPTION_STANDARD. */ + status = HAL_ERROR; + } + + return status; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Provide Rx Event type that has lead to RxEvent callback execution. + * @note When HAL_UARTEx_ReceiveToIdle_IT() or HAL_UARTEx_ReceiveToIdle_DMA() API are called, progress + * of reception process is provided to application through calls of Rx Event callback (either default one + * HAL_UARTEx_RxEventCallback() or user registered one). As several types of events could occur (IDLE event, + * Half Transfer, or Transfer Complete), this function allows to retrieve the Rx Event type that has lead + * to Rx Event callback execution. + * @note This function is expected to be called within the user implementation of Rx Event Callback, + * in order to provide the accurate value : + * In Interrupt Mode : + * - HAL_UART_RXEVENT_TC : when Reception has been completed (expected nb of data has been received) + * - HAL_UART_RXEVENT_IDLE : when Idle event occurred prior reception has been completed (nb of + * received data is lower than expected one) + * In DMA Mode : + * - HAL_UART_RXEVENT_TC : when Reception has been completed (expected nb of data has been received) + * - HAL_UART_RXEVENT_HT : when half of expected nb of data has been received + * - HAL_UART_RXEVENT_IDLE : when Idle event occurred prior reception has been completed (nb of + * received data is lower than expected one). + * In DMA mode, RxEvent callback could be called several times; + * When DMA is configured in Normal Mode, HT event does not stop Reception process; + * When DMA is configured in Circular Mode, HT, TC or IDLE events don't stop Reception process; + * @param huart UART handle. + * @retval Rx Event Type (returned value will be a value of @ref UART_RxEvent_Type_Values) + */ +HAL_UART_RxEventTypeTypeDef HAL_UARTEx_GetRxEventType(UART_HandleTypeDef *huart) +{ + /* Return Rx Event type value, as stored in UART handle */ + return(huart->RxEventType); +} + +/** + * @brief Abort ongoing transfers (blocking mode). + * @param huart UART handle. + * @note This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable UART Interrupts (Tx and Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) + * - Set handle State to READY + * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Abort(UART_HandleTypeDef *huart) +{ + /* Disable TXEIE, TCIE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE | USART_CR1_TXEIE | USART_CR1_TCIE)); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* If Reception till IDLE event was ongoing, disable IDLEIE interrupt */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_IDLEIE)); + } + + /* Disable the UART DMA Tx request if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) + { + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + /* Abort the UART DMA Tx stream: use blocking DMA Abort API (no callback) */ + if (huart->hdmatx != NULL) + { + /* Set the UART DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + huart->hdmatx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(huart->hdmatx) != HAL_OK) + { + if (HAL_DMA_GetError(huart->hdmatx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } + + /* Disable the UART DMA Rx request if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) + { + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the UART DMA Rx stream: use blocking DMA Abort API (no callback) */ + if (huart->hdmarx != NULL) + { + /* Set the UART DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + huart->hdmarx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(huart->hdmarx) != HAL_OK) + { + if (HAL_DMA_GetError(huart->hdmarx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } + + /* Reset Tx and Rx transfer counters */ + huart->TxXferCount = 0x00U; + huart->RxXferCount = 0x00U; + + /* Reset ErrorCode */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + + /* Restore huart->RxState and huart->gState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + huart->gState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + return HAL_OK; +} + +/** + * @brief Abort ongoing Transmit transfer (blocking mode). + * @param huart UART handle. + * @note This procedure could be used for aborting any ongoing Tx transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable UART Interrupts (Tx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) + * - Set handle State to READY + * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_AbortTransmit(UART_HandleTypeDef *huart) +{ + /* Disable TXEIE and TCIE interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TXEIE | USART_CR1_TCIE)); + + /* Disable the UART DMA Tx request if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) + { + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + /* Abort the UART DMA Tx stream : use blocking DMA Abort API (no callback) */ + if (huart->hdmatx != NULL) + { + /* Set the UART DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + huart->hdmatx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(huart->hdmatx) != HAL_OK) + { + if (HAL_DMA_GetError(huart->hdmatx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } + + /* Reset Tx transfer counter */ + huart->TxXferCount = 0x00U; + + /* Restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; + + return HAL_OK; +} + +/** + * @brief Abort ongoing Receive transfer (blocking mode). + * @param huart UART handle. + * @note This procedure could be used for aborting any ongoing Rx transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable UART Interrupts (Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) + * - Set handle State to READY + * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_AbortReceive(UART_HandleTypeDef *huart) +{ + /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE)); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* If Reception till IDLE event was ongoing, disable IDLEIE interrupt */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_IDLEIE)); + } + + /* Disable the UART DMA Rx request if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) + { + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the UART DMA Rx stream : use blocking DMA Abort API (no callback) */ + if (huart->hdmarx != NULL) + { + /* Set the UART DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + huart->hdmarx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(huart->hdmarx) != HAL_OK) + { + if (HAL_DMA_GetError(huart->hdmarx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } + + /* Reset Rx transfer counter */ + huart->RxXferCount = 0x00U; + + /* Restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + return HAL_OK; +} + +/** + * @brief Abort ongoing transfers (Interrupt mode). + * @param huart UART handle. + * @note This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable UART Interrupts (Tx and Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) + * - Set handle State to READY + * - At abort completion, call user abort complete callback + * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be + * considered as completed only when user abort complete callback is executed (not when exiting function). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Abort_IT(UART_HandleTypeDef *huart) +{ + uint32_t AbortCplt = 0x01U; + + /* Disable TXEIE, TCIE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE | USART_CR1_TXEIE | USART_CR1_TCIE)); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* If Reception till IDLE event was ongoing, disable IDLEIE interrupt */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_IDLEIE)); + } + + /* If DMA Tx and/or DMA Rx Handles are associated to UART Handle, DMA Abort complete callbacks should be initialised + before any call to DMA Abort functions */ + /* DMA Tx Handle is valid */ + if (huart->hdmatx != NULL) + { + /* Set DMA Abort Complete callback if UART DMA Tx request if enabled. + Otherwise, set it to NULL */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) + { + huart->hdmatx->XferAbortCallback = UART_DMATxAbortCallback; + } + else + { + huart->hdmatx->XferAbortCallback = NULL; + } + } + /* DMA Rx Handle is valid */ + if (huart->hdmarx != NULL) + { + /* Set DMA Abort Complete callback if UART DMA Rx request if enabled. + Otherwise, set it to NULL */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) + { + huart->hdmarx->XferAbortCallback = UART_DMARxAbortCallback; + } + else + { + huart->hdmarx->XferAbortCallback = NULL; + } + } + + /* Disable the UART DMA Tx request if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) + { + /* Disable DMA Tx at UART level */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + /* Abort the UART DMA Tx stream : use non blocking DMA Abort API (callback) */ + if (huart->hdmatx != NULL) + { + /* UART Tx DMA Abort callback has already been initialised : + will lead to call HAL_UART_AbortCpltCallback() at end of DMA abort procedure */ + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(huart->hdmatx) != HAL_OK) + { + huart->hdmatx->XferAbortCallback = NULL; + } + else + { + AbortCplt = 0x00U; + } + } + } + + /* Disable the UART DMA Rx request if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) + { + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the UART DMA Rx stream : use non blocking DMA Abort API (callback) */ + if (huart->hdmarx != NULL) + { + /* UART Rx DMA Abort callback has already been initialised : + will lead to call HAL_UART_AbortCpltCallback() at end of DMA abort procedure */ + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(huart->hdmarx) != HAL_OK) + { + huart->hdmarx->XferAbortCallback = NULL; + AbortCplt = 0x01U; + } + else + { + AbortCplt = 0x00U; + } + } + } + + /* if no DMA abort complete callback execution is required => call user Abort Complete callback */ + if (AbortCplt == 0x01U) + { + /* Reset Tx and Rx transfer counters */ + huart->TxXferCount = 0x00U; + huart->RxXferCount = 0x00U; + + /* Reset ErrorCode */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + + /* Restore huart->gState and huart->RxState to Ready */ + huart->gState = HAL_UART_STATE_READY; + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort complete callback */ + huart->AbortCpltCallback(huart); +#else + /* Call legacy weak Abort complete callback */ + HAL_UART_AbortCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + + return HAL_OK; +} + +/** + * @brief Abort ongoing Transmit transfer (Interrupt mode). + * @param huart UART handle. + * @note This procedure could be used for aborting any ongoing Tx transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable UART Interrupts (Tx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) + * - Set handle State to READY + * - At abort completion, call user abort complete callback + * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be + * considered as completed only when user abort complete callback is executed (not when exiting function). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_AbortTransmit_IT(UART_HandleTypeDef *huart) +{ + /* Disable TXEIE and TCIE interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TXEIE | USART_CR1_TCIE)); + + /* Disable the UART DMA Tx request if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) + { + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + /* Abort the UART DMA Tx stream : use blocking DMA Abort API (no callback) */ + if (huart->hdmatx != NULL) + { + /* Set the UART DMA Abort callback : + will lead to call HAL_UART_AbortCpltCallback() at end of DMA abort procedure */ + huart->hdmatx->XferAbortCallback = UART_DMATxOnlyAbortCallback; + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(huart->hdmatx) != HAL_OK) + { + /* Call Directly huart->hdmatx->XferAbortCallback function in case of error */ + huart->hdmatx->XferAbortCallback(huart->hdmatx); + } + } + else + { + /* Reset Tx transfer counter */ + huart->TxXferCount = 0x00U; + + /* Restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort Transmit Complete Callback */ + huart->AbortTransmitCpltCallback(huart); +#else + /* Call legacy weak Abort Transmit Complete Callback */ + HAL_UART_AbortTransmitCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + } + else + { + /* Reset Tx transfer counter */ + huart->TxXferCount = 0x00U; + + /* Restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort Transmit Complete Callback */ + huart->AbortTransmitCpltCallback(huart); +#else + /* Call legacy weak Abort Transmit Complete Callback */ + HAL_UART_AbortTransmitCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + + return HAL_OK; +} + +/** + * @brief Abort ongoing Receive transfer (Interrupt mode). + * @param huart UART handle. + * @note This procedure could be used for aborting any ongoing Rx transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable UART Interrupts (Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) + * - Set handle State to READY + * - At abort completion, call user abort complete callback + * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be + * considered as completed only when user abort complete callback is executed (not when exiting function). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_AbortReceive_IT(UART_HandleTypeDef *huart) +{ + /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE)); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* If Reception till IDLE event was ongoing, disable IDLEIE interrupt */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_IDLEIE)); + } + + /* Disable the UART DMA Rx request if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) + { + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the UART DMA Rx stream : use blocking DMA Abort API (no callback) */ + if (huart->hdmarx != NULL) + { + /* Set the UART DMA Abort callback : + will lead to call HAL_UART_AbortCpltCallback() at end of DMA abort procedure */ + huart->hdmarx->XferAbortCallback = UART_DMARxOnlyAbortCallback; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(huart->hdmarx) != HAL_OK) + { + /* Call Directly huart->hdmarx->XferAbortCallback function in case of error */ + huart->hdmarx->XferAbortCallback(huart->hdmarx); + } + } + else + { + /* Reset Rx transfer counter */ + huart->RxXferCount = 0x00U; + + /* Restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort Receive Complete Callback */ + huart->AbortReceiveCpltCallback(huart); +#else + /* Call legacy weak Abort Receive Complete Callback */ + HAL_UART_AbortReceiveCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + } + else + { + /* Reset Rx transfer counter */ + huart->RxXferCount = 0x00U; + + /* Restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort Receive Complete Callback */ + huart->AbortReceiveCpltCallback(huart); +#else + /* Call legacy weak Abort Receive Complete Callback */ + HAL_UART_AbortReceiveCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + + return HAL_OK; +} + +/** + * @brief This function handles UART interrupt request. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval None + */ +void HAL_UART_IRQHandler(UART_HandleTypeDef *huart) +{ + uint32_t isrflags = READ_REG(huart->Instance->SR); + uint32_t cr1its = READ_REG(huart->Instance->CR1); + uint32_t cr3its = READ_REG(huart->Instance->CR3); + uint32_t errorflags = 0x00U; + uint32_t dmarequest = 0x00U; + + /* If no error occurs */ + errorflags = (isrflags & (uint32_t)(USART_SR_PE | USART_SR_FE | USART_SR_ORE | USART_SR_NE)); + if (errorflags == RESET) + { + /* UART in mode Receiver -------------------------------------------------*/ + if (((isrflags & USART_SR_RXNE) != RESET) && ((cr1its & USART_CR1_RXNEIE) != RESET)) + { + UART_Receive_IT(huart); + return; + } + } + + /* If some errors occur */ + if ((errorflags != RESET) && (((cr3its & USART_CR3_EIE) != RESET) + || ((cr1its & (USART_CR1_RXNEIE | USART_CR1_PEIE)) != RESET))) + { + /* UART parity error interrupt occurred ----------------------------------*/ + if (((isrflags & USART_SR_PE) != RESET) && ((cr1its & USART_CR1_PEIE) != RESET)) + { + huart->ErrorCode |= HAL_UART_ERROR_PE; + } + + /* UART noise error interrupt occurred -----------------------------------*/ + if (((isrflags & USART_SR_NE) != RESET) && ((cr3its & USART_CR3_EIE) != RESET)) + { + huart->ErrorCode |= HAL_UART_ERROR_NE; + } + + /* UART frame error interrupt occurred -----------------------------------*/ + if (((isrflags & USART_SR_FE) != RESET) && ((cr3its & USART_CR3_EIE) != RESET)) + { + huart->ErrorCode |= HAL_UART_ERROR_FE; + } + + /* UART Over-Run interrupt occurred --------------------------------------*/ + if (((isrflags & USART_SR_ORE) != RESET) && (((cr1its & USART_CR1_RXNEIE) != RESET) + || ((cr3its & USART_CR3_EIE) != RESET))) + { + huart->ErrorCode |= HAL_UART_ERROR_ORE; + } + + /* Call UART Error Call back function if need be --------------------------*/ + if (huart->ErrorCode != HAL_UART_ERROR_NONE) + { + /* UART in mode Receiver -----------------------------------------------*/ + if (((isrflags & USART_SR_RXNE) != RESET) && ((cr1its & USART_CR1_RXNEIE) != RESET)) + { + UART_Receive_IT(huart); + } + + /* If Overrun error occurs, or if any error occurs in DMA mode reception, + consider error as blocking */ + dmarequest = HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR); + if (((huart->ErrorCode & HAL_UART_ERROR_ORE) != RESET) || dmarequest) + { + /* Blocking error : transfer is aborted + Set the UART state ready to be able to start again the process, + Disable Rx Interrupts, and disable Rx DMA request, if ongoing */ + UART_EndRxTransfer(huart); + + /* Disable the UART DMA Rx request if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) + { + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the UART DMA Rx stream */ + if (huart->hdmarx != NULL) + { + /* Set the UART DMA Abort callback : + will lead to call HAL_UART_ErrorCallback() at end of DMA abort procedure */ + huart->hdmarx->XferAbortCallback = UART_DMAAbortOnError; + if (HAL_DMA_Abort_IT(huart->hdmarx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + huart->hdmarx->XferAbortCallback(huart->hdmarx); + } + } + else + { + /* Call user error callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered error callback*/ + huart->ErrorCallback(huart); +#else + /*Call legacy weak error callback*/ + HAL_UART_ErrorCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + } + else + { + /* Call user error callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered error callback*/ + huart->ErrorCallback(huart); +#else + /*Call legacy weak error callback*/ + HAL_UART_ErrorCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + } + else + { + /* Non Blocking error : transfer could go on. + Error is notified to user through user error callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered error callback*/ + huart->ErrorCallback(huart); +#else + /*Call legacy weak error callback*/ + HAL_UART_ErrorCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + + huart->ErrorCode = HAL_UART_ERROR_NONE; + } + } + return; + } /* End if some error occurs */ + + /* Check current reception Mode : + If Reception till IDLE event has been selected : */ + if ((huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + && ((isrflags & USART_SR_IDLE) != 0U) + && ((cr1its & USART_CR1_IDLEIE) != 0U)) + { + __HAL_UART_CLEAR_IDLEFLAG(huart); + + /* Check if DMA mode is enabled in UART */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) + { + /* DMA mode enabled */ + /* Check received length : If all expected data are received, do nothing, + (DMA cplt callback will be called). + Otherwise, if at least one data has already been received, IDLE event is to be notified to user */ + uint16_t nb_remaining_rx_data = (uint16_t) __HAL_DMA_GET_COUNTER(huart->hdmarx); + if ((nb_remaining_rx_data > 0U) + && (nb_remaining_rx_data < huart->RxXferSize)) + { + /* Reception is not complete */ + huart->RxXferCount = nb_remaining_rx_data; + + /* In Normal mode, end DMA xfer and HAL UART Rx process*/ + if (huart->hdmarx->Init.Mode != DMA_CIRCULAR) + { + /* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Disable the DMA transfer for the receiver request by resetting the DMAR bit + in the UART CR3 register */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* At end of Rx process, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + + /* Last bytes received, so no need as the abort is immediate */ + (void)HAL_DMA_Abort(huart->hdmarx); + } + + /* Initialize type of RxEvent that correspond to RxEvent callback execution; + In this case, Rx Event type is Idle Event */ + huart->RxEventType = HAL_UART_RXEVENT_IDLE; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Event callback*/ + huart->RxEventCallback(huart, (huart->RxXferSize - huart->RxXferCount)); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, (huart->RxXferSize - huart->RxXferCount)); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + else + { + /* If DMA is in Circular mode, Idle event is to be reported to user + even if occurring after a Transfer Complete event from DMA */ + if (nb_remaining_rx_data == huart->RxXferSize) + { + if (huart->hdmarx->Init.Mode == DMA_CIRCULAR) + { + /* Initialize type of RxEvent that correspond to RxEvent callback execution; + In this case, Rx Event type is Idle Event */ + huart->RxEventType = HAL_UART_RXEVENT_IDLE; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Event callback*/ + huart->RxEventCallback(huart, huart->RxXferSize); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + } + } + return; + } + else + { + /* DMA mode not enabled */ + /* Check received length : If all expected data are received, do nothing. + Otherwise, if at least one data has already been received, IDLE event is to be notified to user */ + uint16_t nb_rx_data = huart->RxXferSize - huart->RxXferCount; + if ((huart->RxXferCount > 0U) + && (nb_rx_data > 0U)) + { + /* Disable the UART Parity Error Interrupt and RXNE interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE)); + + /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Rx process is completed, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + + /* Initialize type of RxEvent that correspond to RxEvent callback execution; + In this case, Rx Event type is Idle Event */ + huart->RxEventType = HAL_UART_RXEVENT_IDLE; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx complete callback*/ + huart->RxEventCallback(huart, nb_rx_data); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, nb_rx_data); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + return; + } + } + + /* UART in mode Transmitter ------------------------------------------------*/ + if (((isrflags & USART_SR_TXE) != RESET) && ((cr1its & USART_CR1_TXEIE) != RESET)) + { + UART_Transmit_IT(huart); + return; + } + + /* UART in mode Transmitter end --------------------------------------------*/ + if (((isrflags & USART_SR_TC) != RESET) && ((cr1its & USART_CR1_TCIE) != RESET)) + { + UART_EndTransmit_IT(huart); + return; + } +} + +/** + * @brief Tx Transfer completed callbacks. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval None + */ +__weak void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_UART_TxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Tx Half Transfer completed callbacks. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval None + */ +__weak void HAL_UART_TxHalfCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_UART_TxHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Rx Transfer completed callbacks. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval None + */ +__weak void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_UART_RxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Rx Half Transfer completed callbacks. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval None + */ +__weak void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_UART_RxHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief UART error callbacks. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval None + */ +__weak void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_UART_ErrorCallback could be implemented in the user file + */ +} + +/** + * @brief UART Abort Complete callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_AbortCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_AbortCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief UART Abort Complete callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_AbortTransmitCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_AbortTransmitCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief UART Abort Receive Complete callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_AbortReceiveCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_AbortReceiveCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief Reception Event Callback (Rx event notification called after use of advanced reception service). + * @param huart UART handle + * @param Size Number of data available in application reception buffer (indicates a position in + * reception buffer until which, data are available) + * @retval None + */ +__weak void HAL_UARTEx_RxEventCallback(UART_HandleTypeDef *huart, uint16_t Size) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + UNUSED(Size); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UARTEx_RxEventCallback can be implemented in the user file. + */ +} + +/** + * @} + */ + +/** @defgroup UART_Exported_Functions_Group3 Peripheral Control functions + * @brief UART control functions + * +@verbatim + ============================================================================== + ##### Peripheral Control functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to control the UART: + (+) HAL_LIN_SendBreak() API can be helpful to transmit the break character. + (+) HAL_MultiProcessor_EnterMuteMode() API can be helpful to enter the UART in mute mode. + (+) HAL_MultiProcessor_ExitMuteMode() API can be helpful to exit the UART mute mode by software. + (+) HAL_HalfDuplex_EnableTransmitter() API to enable the UART transmitter and disables the UART receiver in Half Duplex mode + (+) HAL_HalfDuplex_EnableReceiver() API to enable the UART receiver and disables the UART transmitter in Half Duplex mode + +@endverbatim + * @{ + */ + +/** + * @brief Transmits break characters. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart) +{ + /* Check the parameters */ + assert_param(IS_UART_INSTANCE(huart->Instance)); + + /* Process Locked */ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Send break characters */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_SBK); + + huart->gState = HAL_UART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Enters the UART in mute mode. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MultiProcessor_EnterMuteMode(UART_HandleTypeDef *huart) +{ + /* Check the parameters */ + assert_param(IS_UART_INSTANCE(huart->Instance)); + + /* Process Locked */ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Enable the USART mute mode by setting the RWU bit in the CR1 register */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_RWU); + + huart->gState = HAL_UART_STATE_READY; + huart->RxEventType = HAL_UART_RXEVENT_TC; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Exits the UART mute mode: wake up software. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MultiProcessor_ExitMuteMode(UART_HandleTypeDef *huart) +{ + /* Check the parameters */ + assert_param(IS_UART_INSTANCE(huart->Instance)); + + /* Process Locked */ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Disable the USART mute mode by clearing the RWU bit in the CR1 register */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_RWU); + + huart->gState = HAL_UART_STATE_READY; + huart->RxEventType = HAL_UART_RXEVENT_TC; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Enables the UART transmitter and disables the UART receiver. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart) +{ + uint32_t tmpreg = 0x00U; + + /* Process Locked */ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /*-------------------------- USART CR1 Configuration -----------------------*/ + tmpreg = huart->Instance->CR1; + + /* Clear TE and RE bits */ + tmpreg &= (uint32_t)~((uint32_t)(USART_CR1_TE | USART_CR1_RE)); + + /* Enable the USART's transmit interface by setting the TE bit in the USART CR1 register */ + tmpreg |= (uint32_t)USART_CR1_TE; + + /* Write to USART CR1 */ + WRITE_REG(huart->Instance->CR1, (uint32_t)tmpreg); + + huart->gState = HAL_UART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Enables the UART receiver and disables the UART transmitter. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart) +{ + uint32_t tmpreg = 0x00U; + + /* Process Locked */ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /*-------------------------- USART CR1 Configuration -----------------------*/ + tmpreg = huart->Instance->CR1; + + /* Clear TE and RE bits */ + tmpreg &= (uint32_t)~((uint32_t)(USART_CR1_TE | USART_CR1_RE)); + + /* Enable the USART's receive interface by setting the RE bit in the USART CR1 register */ + tmpreg |= (uint32_t)USART_CR1_RE; + + /* Write to USART CR1 */ + WRITE_REG(huart->Instance->CR1, (uint32_t)tmpreg); + + huart->gState = HAL_UART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup UART_Exported_Functions_Group4 Peripheral State and Errors functions + * @brief UART State and Errors functions + * +@verbatim + ============================================================================== + ##### Peripheral State and Errors functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to return the State of + UART communication process, return Peripheral Errors occurred during communication + process + (+) HAL_UART_GetState() API can be helpful to check in run-time the state of the UART peripheral. + (+) HAL_UART_GetError() check in run-time errors that could be occurred during communication. + +@endverbatim + * @{ + */ + +/** + * @brief Returns the UART state. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval HAL state + */ +HAL_UART_StateTypeDef HAL_UART_GetState(const UART_HandleTypeDef *huart) +{ + uint32_t temp1 = 0x00U, temp2 = 0x00U; + temp1 = huart->gState; + temp2 = huart->RxState; + + return (HAL_UART_StateTypeDef)(temp1 | temp2); +} + +/** + * @brief Return the UART error code + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART. + * @retval UART Error Code + */ +uint32_t HAL_UART_GetError(const UART_HandleTypeDef *huart) +{ + return huart->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup UART_Private_Functions UART Private Functions + * @{ + */ + +/** + * @brief Initialize the callbacks to their default values. + * @param huart UART handle. + * @retval none + */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) +void UART_InitCallbacksToDefault(UART_HandleTypeDef *huart) +{ + /* Init the UART Callback settings */ + huart->TxHalfCpltCallback = HAL_UART_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */ + huart->TxCpltCallback = HAL_UART_TxCpltCallback; /* Legacy weak TxCpltCallback */ + huart->RxHalfCpltCallback = HAL_UART_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ + huart->RxCpltCallback = HAL_UART_RxCpltCallback; /* Legacy weak RxCpltCallback */ + huart->ErrorCallback = HAL_UART_ErrorCallback; /* Legacy weak ErrorCallback */ + huart->AbortCpltCallback = HAL_UART_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + huart->AbortTransmitCpltCallback = HAL_UART_AbortTransmitCpltCallback; /* Legacy weak AbortTransmitCpltCallback */ + huart->AbortReceiveCpltCallback = HAL_UART_AbortReceiveCpltCallback; /* Legacy weak AbortReceiveCpltCallback */ + huart->RxEventCallback = HAL_UARTEx_RxEventCallback; /* Legacy weak RxEventCallback */ + +} +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + +/** + * @brief DMA UART transmit process complete callback. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void UART_DMATransmitCplt(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + /* DMA Normal mode*/ + if ((hdma->Instance->CR & DMA_SxCR_CIRC) == 0U) + { + huart->TxXferCount = 0x00U; + + /* Disable the DMA transfer for transmit request by setting the DMAT bit + in the UART CR3 register */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + /* Enable the UART Transmit Complete Interrupt */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_TCIE); + + } + /* DMA Circular mode */ + else + { +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Tx complete callback*/ + huart->TxCpltCallback(huart); +#else + /*Call legacy weak Tx complete callback*/ + HAL_UART_TxCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } +} + +/** + * @brief DMA UART transmit process half complete callback + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void UART_DMATxHalfCplt(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Tx complete callback*/ + huart->TxHalfCpltCallback(huart); +#else + /*Call legacy weak Tx complete callback*/ + HAL_UART_TxHalfCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA UART receive process complete callback. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void UART_DMAReceiveCplt(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + /* DMA Normal mode*/ + if ((hdma->Instance->CR & DMA_SxCR_CIRC) == 0U) + { + huart->RxXferCount = 0U; + + /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Disable the DMA transfer for the receiver request by setting the DMAR bit + in the UART CR3 register */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* At end of Rx process, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + + /* If Reception till IDLE event has been selected, Disable IDLE Interrupt */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + } + } + + /* Initialize type of RxEvent that correspond to RxEvent callback execution; + In this case, Rx Event type is Transfer Complete */ + huart->RxEventType = HAL_UART_RXEVENT_TC; + + /* Check current reception Mode : + If Reception till IDLE event has been selected : use Rx Event callback */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Event callback*/ + huart->RxEventCallback(huart, huart->RxXferSize); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + else + { + /* In other cases : use Rx Complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx complete callback*/ + huart->RxCpltCallback(huart); +#else + /*Call legacy weak Rx complete callback*/ + HAL_UART_RxCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } +} + +/** + * @brief DMA UART receive process half complete callback + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void UART_DMARxHalfCplt(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + /* Initialize type of RxEvent that correspond to RxEvent callback execution; + In this case, Rx Event type is Half Transfer */ + huart->RxEventType = HAL_UART_RXEVENT_HT; + + /* Check current reception Mode : + If Reception till IDLE event has been selected : use Rx Event callback */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Event callback*/ + huart->RxEventCallback(huart, huart->RxXferSize / 2U); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize / 2U); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + else + { + /* In other cases : use Rx Half Complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Half complete callback*/ + huart->RxHalfCpltCallback(huart); +#else + /*Call legacy weak Rx Half complete callback*/ + HAL_UART_RxHalfCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } +} + +/** + * @brief DMA UART communication error callback. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void UART_DMAError(DMA_HandleTypeDef *hdma) +{ + uint32_t dmarequest = 0x00U; + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + /* Stop UART DMA Tx request if ongoing */ + dmarequest = HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT); + if ((huart->gState == HAL_UART_STATE_BUSY_TX) && dmarequest) + { + huart->TxXferCount = 0x00U; + UART_EndTxTransfer(huart); + } + + /* Stop UART DMA Rx request if ongoing */ + dmarequest = HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR); + if ((huart->RxState == HAL_UART_STATE_BUSY_RX) && dmarequest) + { + huart->RxXferCount = 0x00U; + UART_EndRxTransfer(huart); + } + + huart->ErrorCode |= HAL_UART_ERROR_DMA; +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered error callback*/ + huart->ErrorCallback(huart); +#else + /*Call legacy weak error callback*/ + HAL_UART_ErrorCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + +/** + * @brief This function handles UART Communication Timeout. It waits + * until a flag is no longer in the specified status. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @param Flag specifies the UART flag to check. + * @param Status The actual Flag status (SET or RESET). + * @param Tickstart Tick start value + * @param Timeout Timeout duration + * @retval HAL status + */ +static HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, uint32_t Flag, FlagStatus Status, + uint32_t Tickstart, uint32_t Timeout) +{ + /* Wait until flag is set */ + while ((__HAL_UART_GET_FLAG(huart, Flag) ? SET : RESET) == Status) + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + { + + return HAL_TIMEOUT; + } + + if ((READ_BIT(huart->Instance->CR1, USART_CR1_RE) != 0U) && (Flag != UART_FLAG_TXE) && (Flag != UART_FLAG_TC)) + { + if (__HAL_UART_GET_FLAG(huart, UART_FLAG_ORE) == SET) + { + /* Clear Overrun Error flag*/ + __HAL_UART_CLEAR_OREFLAG(huart); + + /* Blocking error : transfer is aborted + Set the UART state ready to be able to start again the process, + Disable Rx Interrupts if ongoing */ + UART_EndRxTransfer(huart); + + huart->ErrorCode = HAL_UART_ERROR_ORE; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_ERROR; + } + } + } + } + return HAL_OK; +} + +/** + * @brief Start Receive operation in interrupt mode. + * @note This function could be called by all HAL UART API providing reception in Interrupt mode. + * @note When calling this function, parameters validity is considered as already checked, + * i.e. Rx State, buffer address, ... + * UART Handle is assumed as Locked. + * @param huart UART handle. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be received. + * @retval HAL status + */ +HAL_StatusTypeDef UART_Start_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +{ + huart->pRxBuffPtr = pData; + huart->RxXferSize = Size; + huart->RxXferCount = Size; + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->RxState = HAL_UART_STATE_BUSY_RX; + + if (huart->Init.Parity != UART_PARITY_NONE) + { + /* Enable the UART Parity Error Interrupt */ + __HAL_UART_ENABLE_IT(huart, UART_IT_PE); + } + + /* Enable the UART Error Interrupt: (Frame error, noise error, overrun error) */ + __HAL_UART_ENABLE_IT(huart, UART_IT_ERR); + + /* Enable the UART Data Register not empty Interrupt */ + __HAL_UART_ENABLE_IT(huart, UART_IT_RXNE); + + return HAL_OK; +} + +/** + * @brief Start Receive operation in DMA mode. + * @note This function could be called by all HAL UART API providing reception in DMA mode. + * @note When calling this function, parameters validity is considered as already checked, + * i.e. Rx State, buffer address, ... + * UART Handle is assumed as Locked. + * @param huart UART handle. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be received. + * @retval HAL status + */ +HAL_StatusTypeDef UART_Start_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +{ + uint32_t *tmp; + + huart->pRxBuffPtr = pData; + huart->RxXferSize = Size; + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->RxState = HAL_UART_STATE_BUSY_RX; + + /* Set the UART DMA transfer complete callback */ + huart->hdmarx->XferCpltCallback = UART_DMAReceiveCplt; + + /* Set the UART DMA Half transfer complete callback */ + huart->hdmarx->XferHalfCpltCallback = UART_DMARxHalfCplt; + + /* Set the DMA error callback */ + huart->hdmarx->XferErrorCallback = UART_DMAError; + + /* Set the DMA abort callback */ + huart->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA stream */ + tmp = (uint32_t *)&pData; + if (HAL_DMA_Start_IT(huart->hdmarx, (uint32_t)&huart->Instance->DR, *(uint32_t *)tmp, Size) != HAL_OK) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + /* Restore huart->RxState to ready */ + huart->RxState = HAL_UART_STATE_READY; + + return HAL_ERROR; + } + /* Clear the Overrun flag just before enabling the DMA Rx request: can be mandatory for the second transfer */ + __HAL_UART_CLEAR_OREFLAG(huart); + + if (huart->Init.Parity != UART_PARITY_NONE) + { + /* Enable the UART Parity Error Interrupt */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_PEIE); + } + + /* Enable the UART Error Interrupt: (Frame error, noise error, overrun error) */ + ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Enable the DMA transfer for the receiver request by setting the DMAR bit + in the UART CR3 register */ + ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + return HAL_OK; +} + +/** + * @brief End ongoing Tx transfer on UART peripheral (following error detection or Transmit completion). + * @param huart UART handle. + * @retval None + */ +static void UART_EndTxTransfer(UART_HandleTypeDef *huart) +{ + /* Disable TXEIE and TCIE interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TXEIE | USART_CR1_TCIE)); + + /* At end of Tx process, restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; +} + +/** + * @brief End ongoing Rx transfer on UART peripheral (following error detection or Reception completion). + * @param huart UART handle. + * @retval None + */ +static void UART_EndRxTransfer(UART_HandleTypeDef *huart) +{ + /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE)); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* In case of reception waiting for IDLE event, disable also the IDLE IE interrupt source */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + } + + /* At end of Rx process, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; +} + +/** + * @brief DMA UART communication abort callback, when initiated by HAL services on Error + * (To be called at end of DMA Abort procedure following error occurrence). + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void UART_DMAAbortOnError(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + huart->RxXferCount = 0x00U; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered error callback*/ + huart->ErrorCallback(huart); +#else + /*Call legacy weak error callback*/ + HAL_UART_ErrorCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA UART Tx communication abort callback, when initiated by user + * (To be called at end of DMA Tx Abort procedure following user abort request). + * @note When this callback is executed, User Abort complete call back is called only if no + * Abort still ongoing for Rx DMA Handle. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void UART_DMATxAbortCallback(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + huart->hdmatx->XferAbortCallback = NULL; + + /* Check if an Abort process is still ongoing */ + if (huart->hdmarx != NULL) + { + if (huart->hdmarx->XferAbortCallback != NULL) + { + return; + } + } + + /* No Abort process still ongoing : All DMA channels are aborted, call user Abort Complete callback */ + huart->TxXferCount = 0x00U; + huart->RxXferCount = 0x00U; + + /* Reset ErrorCode */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + + /* Restore huart->gState and huart->RxState to Ready */ + huart->gState = HAL_UART_STATE_READY; + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Call user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort complete callback */ + huart->AbortCpltCallback(huart); +#else + /* Call legacy weak Abort complete callback */ + HAL_UART_AbortCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA UART Rx communication abort callback, when initiated by user + * (To be called at end of DMA Rx Abort procedure following user abort request). + * @note When this callback is executed, User Abort complete call back is called only if no + * Abort still ongoing for Tx DMA Handle. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void UART_DMARxAbortCallback(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + huart->hdmarx->XferAbortCallback = NULL; + + /* Check if an Abort process is still ongoing */ + if (huart->hdmatx != NULL) + { + if (huart->hdmatx->XferAbortCallback != NULL) + { + return; + } + } + + /* No Abort process still ongoing : All DMA channels are aborted, call user Abort Complete callback */ + huart->TxXferCount = 0x00U; + huart->RxXferCount = 0x00U; + + /* Reset ErrorCode */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + + /* Restore huart->gState and huart->RxState to Ready */ + huart->gState = HAL_UART_STATE_READY; + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Call user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort complete callback */ + huart->AbortCpltCallback(huart); +#else + /* Call legacy weak Abort complete callback */ + HAL_UART_AbortCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA UART Tx communication abort callback, when initiated by user by a call to + * HAL_UART_AbortTransmit_IT API (Abort only Tx transfer) + * (This callback is executed at end of DMA Tx Abort procedure following user abort request, + * and leads to user Tx Abort Complete callback execution). + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void UART_DMATxOnlyAbortCallback(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + huart->TxXferCount = 0x00U; + + /* Restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; + + /* Call user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort Transmit Complete Callback */ + huart->AbortTransmitCpltCallback(huart); +#else + /* Call legacy weak Abort Transmit Complete Callback */ + HAL_UART_AbortTransmitCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA UART Rx communication abort callback, when initiated by user by a call to + * HAL_UART_AbortReceive_IT API (Abort only Rx transfer) + * (This callback is executed at end of DMA Rx Abort procedure following user abort request, + * and leads to user Rx Abort Complete callback execution). + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void UART_DMARxOnlyAbortCallback(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + huart->RxXferCount = 0x00U; + + /* Restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Call user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort Receive Complete Callback */ + huart->AbortReceiveCpltCallback(huart); +#else + /* Call legacy weak Abort Receive Complete Callback */ + HAL_UART_AbortReceiveCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + +/** + * @brief Sends an amount of data in non blocking mode. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval HAL status + */ +static HAL_StatusTypeDef UART_Transmit_IT(UART_HandleTypeDef *huart) +{ + const uint16_t *tmp; + + /* Check that a Tx process is ongoing */ + if (huart->gState == HAL_UART_STATE_BUSY_TX) + { + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + tmp = (const uint16_t *) huart->pTxBuffPtr; + huart->Instance->DR = (uint16_t)(*tmp & (uint16_t)0x01FF); + huart->pTxBuffPtr += 2U; + } + else + { + huart->Instance->DR = (uint8_t)(*huart->pTxBuffPtr++ & (uint8_t)0x00FF); + } + + if (--huart->TxXferCount == 0U) + { + /* Disable the UART Transmit Data Register Empty Interrupt */ + __HAL_UART_DISABLE_IT(huart, UART_IT_TXE); + + /* Enable the UART Transmit Complete Interrupt */ + __HAL_UART_ENABLE_IT(huart, UART_IT_TC); + } + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Wraps up transmission in non blocking mode. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval HAL status + */ +static HAL_StatusTypeDef UART_EndTransmit_IT(UART_HandleTypeDef *huart) +{ + /* Disable the UART Transmit Complete Interrupt */ + __HAL_UART_DISABLE_IT(huart, UART_IT_TC); + + /* Tx process is ended, restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Tx complete callback*/ + huart->TxCpltCallback(huart); +#else + /*Call legacy weak Tx complete callback*/ + HAL_UART_TxCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + + return HAL_OK; +} + +/** + * @brief Receives an amount of data in non blocking mode + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval HAL status + */ +static HAL_StatusTypeDef UART_Receive_IT(UART_HandleTypeDef *huart) +{ + uint8_t *pdata8bits = NULL; + uint16_t *pdata16bits = NULL; + + /* Check that a Rx process is ongoing */ + if (huart->RxState == HAL_UART_STATE_BUSY_RX) + { + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + /* Unused pdata8bits */ + UNUSED(pdata8bits); + pdata16bits = (uint16_t *) huart->pRxBuffPtr; + *pdata16bits = (uint16_t)(huart->Instance->DR & (uint16_t)0x01FF); + huart->pRxBuffPtr += 2U; + } + else + { + pdata8bits = (uint8_t *) huart->pRxBuffPtr; + /* Unused pdata16bits */ + UNUSED(pdata16bits); + + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) || ((huart->Init.WordLength == UART_WORDLENGTH_8B) && (huart->Init.Parity == UART_PARITY_NONE))) + { + *pdata8bits = (uint8_t)(huart->Instance->DR & (uint8_t)0x00FF); + } + else + { + *pdata8bits = (uint8_t)(huart->Instance->DR & (uint8_t)0x007F); + } + huart->pRxBuffPtr += 1U; + } + + if (--huart->RxXferCount == 0U) + { + /* Disable the UART Data Register not empty Interrupt */ + __HAL_UART_DISABLE_IT(huart, UART_IT_RXNE); + + /* Disable the UART Parity Error Interrupt */ + __HAL_UART_DISABLE_IT(huart, UART_IT_PE); + + /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) */ + __HAL_UART_DISABLE_IT(huart, UART_IT_ERR); + + /* Rx process is completed, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + + /* Initialize type of RxEvent to Transfer Complete */ + huart->RxEventType = HAL_UART_RXEVENT_TC; + + /* Check current reception Mode : + If Reception till IDLE event has been selected : */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + /* Set reception type to Standard */ + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Disable IDLE interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + + /* Check if IDLE flag is set */ + if (__HAL_UART_GET_FLAG(huart, UART_FLAG_IDLE)) + { + /* Clear IDLE flag in ISR */ + __HAL_UART_CLEAR_IDLEFLAG(huart); + } + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Event callback*/ + huart->RxEventCallback(huart, huart->RxXferSize); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + else + { + /* Standard reception API called */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx complete callback*/ + huart->RxCpltCallback(huart); +#else + /*Call legacy weak Rx complete callback*/ + HAL_UART_RxCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + + return HAL_OK; + } + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Configures the UART peripheral. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval None + */ +static void UART_SetConfig(UART_HandleTypeDef *huart) +{ + uint32_t tmpreg; + uint32_t pclk; + + /* Check the parameters */ + assert_param(IS_UART_BAUDRATE(huart->Init.BaudRate)); + assert_param(IS_UART_STOPBITS(huart->Init.StopBits)); + assert_param(IS_UART_PARITY(huart->Init.Parity)); + assert_param(IS_UART_MODE(huart->Init.Mode)); + + /*-------------------------- USART CR2 Configuration -----------------------*/ + /* Configure the UART Stop Bits: Set STOP[13:12] bits + according to huart->Init.StopBits value */ + MODIFY_REG(huart->Instance->CR2, USART_CR2_STOP, huart->Init.StopBits); + + /*-------------------------- USART CR1 Configuration -----------------------*/ + /* Configure the UART Word Length, Parity and mode: + Set the M bits according to huart->Init.WordLength value + Set PCE and PS bits according to huart->Init.Parity value + Set TE and RE bits according to huart->Init.Mode value + Set OVER8 bit according to huart->Init.OverSampling value */ + + tmpreg = (uint32_t)huart->Init.WordLength | huart->Init.Parity | huart->Init.Mode | huart->Init.OverSampling; + MODIFY_REG(huart->Instance->CR1, + (uint32_t)(USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | USART_CR1_TE | USART_CR1_RE | USART_CR1_OVER8), + tmpreg); + + /*-------------------------- USART CR3 Configuration -----------------------*/ + /* Configure the UART HFC: Set CTSE and RTSE bits according to huart->Init.HwFlowCtl value */ + MODIFY_REG(huart->Instance->CR3, (USART_CR3_RTSE | USART_CR3_CTSE), huart->Init.HwFlowCtl); + + +#if defined(USART6) && defined(UART9) && defined(UART10) + if ((huart->Instance == USART1) || (huart->Instance == USART6) || (huart->Instance == UART9) || (huart->Instance == UART10)) + { + pclk = HAL_RCC_GetPCLK2Freq(); + } +#elif defined(USART6) + if ((huart->Instance == USART1) || (huart->Instance == USART6)) + { + pclk = HAL_RCC_GetPCLK2Freq(); + } +#else + if (huart->Instance == USART1) + { + pclk = HAL_RCC_GetPCLK2Freq(); + } +#endif /* USART6 */ + else + { + pclk = HAL_RCC_GetPCLK1Freq(); + } + /*-------------------------- USART BRR Configuration ---------------------*/ + if (huart->Init.OverSampling == UART_OVERSAMPLING_8) + { + huart->Instance->BRR = UART_BRR_SAMPLING8(pclk, huart->Init.BaudRate); + } + else + { + huart->Instance->BRR = UART_BRR_SAMPLING16(pclk, huart->Init.BaudRate); + } +} + +/** + * @} + */ + +#endif /* HAL_UART_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + diff --git a/cubemx/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_fsmc.c b/cubemx/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_fsmc.c new file mode 100644 index 0000000..435c7c1 --- /dev/null +++ b/cubemx/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_fsmc.c @@ -0,0 +1,1061 @@ +/** + ****************************************************************************** + * @file stm32f4xx_ll_fsmc.c + * @author MCD Application Team + * @brief FSMC Low Layer HAL module driver. + * + * This file provides firmware functions to manage the following + * functionalities of the Flexible Memory Controller (FSMC) peripheral memories: + * + Initialization/de-initialization functions + * + Peripheral Control functions + * + Peripheral State functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### FSMC peripheral features ##### + ============================================================================== + [..] The Flexible memory controller (FSMC) includes following memory controllers: + (+) The NOR/PSRAM memory controller + (+) The NAND/PC Card memory controller + + [..] The FSMC functional block makes the interface with synchronous and asynchronous static + memories and 16-bit PC memory cards. Its main purposes are: + (+) to translate AHB transactions into the appropriate external device protocol + (+) to meet the access time requirements of the external memory devices + + [..] All external memories share the addresses, data and control signals with the controller. + Each external device is accessed by means of a unique Chip Select. The FSMC performs + only one access at a time to an external device. + The main features of the FSMC controller are the following: + (+) Interface with static-memory mapped devices including: + (++) Static random access memory (SRAM) + (++) Read-only memory (ROM) + (++) NOR Flash memory/OneNAND Flash memory + (++) PSRAM (4 memory banks) + (++) 16-bit PC Card compatible devices + (++) Two banks of NAND Flash memory with ECC hardware to check up to 8 Kbytes of + data + (+) Independent Chip Select control for each memory bank + (+) Independent configuration for each memory bank + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal.h" + +/** @addtogroup STM32F4xx_HAL_Driver + * @{ + */ +#if defined(HAL_NOR_MODULE_ENABLED) || defined(HAL_NAND_MODULE_ENABLED) || defined(HAL_PCCARD_MODULE_ENABLED) \ + || defined(HAL_SRAM_MODULE_ENABLED) + +/** @defgroup FSMC_LL FSMC Low Layer + * @brief FSMC driver modules + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +/** @defgroup FSMC_LL_Private_Constants FSMC Low Layer Private Constants + * @{ + */ + +/* ----------------------- FSMC registers bit mask --------------------------- */ + +#if defined(FSMC_Bank1) +/* --- BCR Register ---*/ +/* BCR register clear mask */ + +/* --- BTR Register ---*/ +/* BTR register clear mask */ +#define BTR_CLEAR_MASK ((uint32_t)(FSMC_BTR1_ADDSET | FSMC_BTR1_ADDHLD |\ + FSMC_BTR1_DATAST | FSMC_BTR1_BUSTURN |\ + FSMC_BTR1_CLKDIV | FSMC_BTR1_DATLAT |\ + FSMC_BTR1_ACCMOD)) + +/* --- BWTR Register ---*/ +/* BWTR register clear mask */ +#define BWTR_CLEAR_MASK ((uint32_t)(FSMC_BWTR1_ADDSET | FSMC_BWTR1_ADDHLD |\ + FSMC_BWTR1_DATAST | FSMC_BWTR1_BUSTURN |\ + FSMC_BWTR1_ACCMOD)) +#endif /* FSMC_Bank1 */ +#if defined(FSMC_Bank2_3) + +#if defined (FSMC_PCR_PWAITEN) +/* --- PCR Register ---*/ +/* PCR register clear mask */ +#define PCR_CLEAR_MASK ((uint32_t)(FSMC_PCR_PWAITEN | FSMC_PCR_PBKEN | \ + FSMC_PCR_PTYP | FSMC_PCR_PWID | \ + FSMC_PCR_ECCEN | FSMC_PCR_TCLR | \ + FSMC_PCR_TAR | FSMC_PCR_ECCPS)) +/* --- PMEM Register ---*/ +/* PMEM register clear mask */ +#define PMEM_CLEAR_MASK ((uint32_t)(FSMC_PMEM_MEMSET2 | FSMC_PMEM_MEMWAIT2 |\ + FSMC_PMEM_MEMHOLD2 | FSMC_PMEM_MEMHIZ2)) + +/* --- PATT Register ---*/ +/* PATT register clear mask */ +#define PATT_CLEAR_MASK ((uint32_t)(FSMC_PATT_ATTSET2 | FSMC_PATT_ATTWAIT2 |\ + FSMC_PATT_ATTHOLD2 | FSMC_PATT_ATTHIZ2)) +#else +/* --- PCR Register ---*/ +/* PCR register clear mask */ +#define PCR_CLEAR_MASK ((uint32_t)(FSMC_PCR2_PWAITEN | FSMC_PCR2_PBKEN | \ + FSMC_PCR2_PTYP | FSMC_PCR2_PWID | \ + FSMC_PCR2_ECCEN | FSMC_PCR2_TCLR | \ + FSMC_PCR2_TAR | FSMC_PCR2_ECCPS)) +/* --- PMEM Register ---*/ +/* PMEM register clear mask */ +#define PMEM_CLEAR_MASK ((uint32_t)(FSMC_PMEM2_MEMSET2 | FSMC_PMEM2_MEMWAIT2 |\ + FSMC_PMEM2_MEMHOLD2 | FSMC_PMEM2_MEMHIZ2)) + +/* --- PATT Register ---*/ +/* PATT register clear mask */ +#define PATT_CLEAR_MASK ((uint32_t)(FSMC_PATT2_ATTSET2 | FSMC_PATT2_ATTWAIT2 |\ + FSMC_PATT2_ATTHOLD2 | FSMC_PATT2_ATTHIZ2)) + +#endif /* FSMC_PCR_PWAITEN */ +#endif /* FSMC_Bank2_3 */ +#if defined(FSMC_Bank4) +/* --- PCR Register ---*/ +/* PCR register clear mask */ +#define PCR4_CLEAR_MASK ((uint32_t)(FSMC_PCR4_PWAITEN | FSMC_PCR4_PBKEN | \ + FSMC_PCR4_PTYP | FSMC_PCR4_PWID | \ + FSMC_PCR4_ECCEN | FSMC_PCR4_TCLR | \ + FSMC_PCR4_TAR | FSMC_PCR4_ECCPS)) +/* --- PMEM Register ---*/ +/* PMEM register clear mask */ +#define PMEM4_CLEAR_MASK ((uint32_t)(FSMC_PMEM4_MEMSET4 | FSMC_PMEM4_MEMWAIT4 |\ + FSMC_PMEM4_MEMHOLD4 | FSMC_PMEM4_MEMHIZ4)) + +/* --- PATT Register ---*/ +/* PATT register clear mask */ +#define PATT4_CLEAR_MASK ((uint32_t)(FSMC_PATT4_ATTSET4 | FSMC_PATT4_ATTWAIT4 |\ + FSMC_PATT4_ATTHOLD4 | FSMC_PATT4_ATTHIZ4)) + +/* --- PIO4 Register ---*/ +/* PIO4 register clear mask */ +#define PIO4_CLEAR_MASK ((uint32_t)(FSMC_PIO4_IOSET4 | FSMC_PIO4_IOWAIT4 | \ + FSMC_PIO4_IOHOLD4 | FSMC_PIO4_IOHIZ4)) + +#endif /* FSMC_Bank4 */ + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup FSMC_LL_Exported_Functions FSMC Low Layer Exported Functions + * @{ + */ + +#if defined(FSMC_Bank1) + +/** @defgroup FSMC_LL_Exported_Functions_NORSRAM FSMC Low Layer NOR SRAM Exported Functions + * @brief NORSRAM Controller functions + * + @verbatim + ============================================================================== + ##### How to use NORSRAM device driver ##### + ============================================================================== + + [..] + This driver contains a set of APIs to interface with the FSMC NORSRAM banks in order + to run the NORSRAM external devices. + + (+) FSMC NORSRAM bank reset using the function FSMC_NORSRAM_DeInit() + (+) FSMC NORSRAM bank control configuration using the function FSMC_NORSRAM_Init() + (+) FSMC NORSRAM bank timing configuration using the function FSMC_NORSRAM_Timing_Init() + (+) FSMC NORSRAM bank extended timing configuration using the function + FSMC_NORSRAM_Extended_Timing_Init() + (+) FSMC NORSRAM bank enable/disable write operation using the functions + FSMC_NORSRAM_WriteOperation_Enable()/FSMC_NORSRAM_WriteOperation_Disable() + +@endverbatim + * @{ + */ + +/** @defgroup FSMC_LL_NORSRAM_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * + @verbatim + ============================================================================== + ##### Initialization and de_initialization functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the FSMC NORSRAM interface + (+) De-initialize the FSMC NORSRAM interface + (+) Configure the FSMC clock and associated GPIOs + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the FSMC_NORSRAM device according to the specified + * control parameters in the FSMC_NORSRAM_InitTypeDef + * @param Device Pointer to NORSRAM device instance + * @param Init Pointer to NORSRAM Initialization structure + * @retval HAL status + */ +HAL_StatusTypeDef FSMC_NORSRAM_Init(FSMC_NORSRAM_TypeDef *Device, + const FSMC_NORSRAM_InitTypeDef *Init) +{ + uint32_t flashaccess; + uint32_t btcr_reg; + uint32_t mask; + + /* Check the parameters */ + assert_param(IS_FSMC_NORSRAM_DEVICE(Device)); + assert_param(IS_FSMC_NORSRAM_BANK(Init->NSBank)); + assert_param(IS_FSMC_MUX(Init->DataAddressMux)); + assert_param(IS_FSMC_MEMORY(Init->MemoryType)); + assert_param(IS_FSMC_NORSRAM_MEMORY_WIDTH(Init->MemoryDataWidth)); + assert_param(IS_FSMC_BURSTMODE(Init->BurstAccessMode)); + assert_param(IS_FSMC_WAIT_POLARITY(Init->WaitSignalPolarity)); +#if defined(FSMC_BCR1_WRAPMOD) + assert_param(IS_FSMC_WRAP_MODE(Init->WrapMode)); +#endif /* FSMC_BCR1_WRAPMOD */ + assert_param(IS_FSMC_WAIT_SIGNAL_ACTIVE(Init->WaitSignalActive)); + assert_param(IS_FSMC_WRITE_OPERATION(Init->WriteOperation)); + assert_param(IS_FSMC_WAITE_SIGNAL(Init->WaitSignal)); + assert_param(IS_FSMC_EXTENDED_MODE(Init->ExtendedMode)); + assert_param(IS_FSMC_ASYNWAIT(Init->AsynchronousWait)); + assert_param(IS_FSMC_WRITE_BURST(Init->WriteBurst)); +#if defined(FSMC_BCR1_CCLKEN) + assert_param(IS_FSMC_CONTINOUS_CLOCK(Init->ContinuousClock)); +#endif /* FSMC_BCR1_CCLKEN */ +#if defined(FSMC_BCR1_WFDIS) + assert_param(IS_FSMC_WRITE_FIFO(Init->WriteFifo)); +#endif /* FSMC_BCR1_WFDIS */ + assert_param(IS_FSMC_PAGESIZE(Init->PageSize)); + + /* Disable NORSRAM Device */ + __FSMC_NORSRAM_DISABLE(Device, Init->NSBank); + + /* Set NORSRAM device control parameters */ + if (Init->MemoryType == FSMC_MEMORY_TYPE_NOR) + { + flashaccess = FSMC_NORSRAM_FLASH_ACCESS_ENABLE; + } + else + { + flashaccess = FSMC_NORSRAM_FLASH_ACCESS_DISABLE; + } + + btcr_reg = (flashaccess | \ + Init->DataAddressMux | \ + Init->MemoryType | \ + Init->MemoryDataWidth | \ + Init->BurstAccessMode | \ + Init->WaitSignalPolarity | \ + Init->WaitSignalActive | \ + Init->WriteOperation | \ + Init->WaitSignal | \ + Init->ExtendedMode | \ + Init->AsynchronousWait | \ + Init->WriteBurst); + +#if defined(FSMC_BCR1_WRAPMOD) + btcr_reg |= Init->WrapMode; +#endif /* FSMC_BCR1_WRAPMOD */ +#if defined(FSMC_BCR1_CCLKEN) + btcr_reg |= Init->ContinuousClock; +#endif /* FSMC_BCR1_CCLKEN */ +#if defined(FSMC_BCR1_WFDIS) + btcr_reg |= Init->WriteFifo; +#endif /* FSMC_BCR1_WFDIS */ + btcr_reg |= Init->PageSize; + + mask = (FSMC_BCR1_MBKEN | + FSMC_BCR1_MUXEN | + FSMC_BCR1_MTYP | + FSMC_BCR1_MWID | + FSMC_BCR1_FACCEN | + FSMC_BCR1_BURSTEN | + FSMC_BCR1_WAITPOL | + FSMC_BCR1_WAITCFG | + FSMC_BCR1_WREN | + FSMC_BCR1_WAITEN | + FSMC_BCR1_EXTMOD | + FSMC_BCR1_ASYNCWAIT | + FSMC_BCR1_CBURSTRW); + +#if defined(FSMC_BCR1_WRAPMOD) + mask |= FSMC_BCR1_WRAPMOD; +#endif /* FSMC_BCR1_WRAPMOD */ +#if defined(FSMC_BCR1_CCLKEN) + mask |= FSMC_BCR1_CCLKEN; +#endif /* FSMC_BCR1_CCLKEN */ +#if defined(FSMC_BCR1_WFDIS) + mask |= FSMC_BCR1_WFDIS; +#endif /* FSMC_BCR1_WFDIS */ + mask |= FSMC_BCR1_CPSIZE; + + MODIFY_REG(Device->BTCR[Init->NSBank], mask, btcr_reg); + +#if defined(FSMC_BCR1_CCLKEN) + /* Configure synchronous mode when Continuous clock is enabled for bank2..4 */ + if ((Init->ContinuousClock == FSMC_CONTINUOUS_CLOCK_SYNC_ASYNC) && (Init->NSBank != FSMC_NORSRAM_BANK1)) + { + MODIFY_REG(Device->BTCR[FSMC_NORSRAM_BANK1], FSMC_BCR1_CCLKEN, Init->ContinuousClock); + } +#endif /* FSMC_BCR1_CCLKEN */ +#if defined(FSMC_BCR1_WFDIS) + + if (Init->NSBank != FSMC_NORSRAM_BANK1) + { + /* Configure Write FIFO mode when Write Fifo is enabled for bank2..4 */ + SET_BIT(Device->BTCR[FSMC_NORSRAM_BANK1], (uint32_t)(Init->WriteFifo)); + } +#endif /* FSMC_BCR1_WFDIS */ + + return HAL_OK; +} + +/** + * @brief DeInitialize the FSMC_NORSRAM peripheral + * @param Device Pointer to NORSRAM device instance + * @param ExDevice Pointer to NORSRAM extended mode device instance + * @param Bank NORSRAM bank number + * @retval HAL status + */ +HAL_StatusTypeDef FSMC_NORSRAM_DeInit(FSMC_NORSRAM_TypeDef *Device, + FSMC_NORSRAM_EXTENDED_TypeDef *ExDevice, uint32_t Bank) +{ + /* Check the parameters */ + assert_param(IS_FSMC_NORSRAM_DEVICE(Device)); + assert_param(IS_FSMC_NORSRAM_EXTENDED_DEVICE(ExDevice)); + assert_param(IS_FSMC_NORSRAM_BANK(Bank)); + + /* Disable the FSMC_NORSRAM device */ + __FSMC_NORSRAM_DISABLE(Device, Bank); + + /* De-initialize the FSMC_NORSRAM device */ + /* FSMC_NORSRAM_BANK1 */ + if (Bank == FSMC_NORSRAM_BANK1) + { + Device->BTCR[Bank] = 0x000030DBU; + } + /* FSMC_NORSRAM_BANK2, FSMC_NORSRAM_BANK3 or FSMC_NORSRAM_BANK4 */ + else + { + Device->BTCR[Bank] = 0x000030D2U; + } + + Device->BTCR[Bank + 1U] = 0x0FFFFFFFU; + ExDevice->BWTR[Bank] = 0x0FFFFFFFU; + + return HAL_OK; +} + +/** + * @brief Initialize the FSMC_NORSRAM Timing according to the specified + * parameters in the FSMC_NORSRAM_TimingTypeDef + * @param Device Pointer to NORSRAM device instance + * @param Timing Pointer to NORSRAM Timing structure + * @param Bank NORSRAM bank number + * @retval HAL status + */ +HAL_StatusTypeDef FSMC_NORSRAM_Timing_Init(FSMC_NORSRAM_TypeDef *Device, + const FSMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank) +{ +#if defined(FSMC_BCR1_CCLKEN) + uint32_t tmpr; +#endif /* FSMC_BCR1_CCLKEN */ + + /* Check the parameters */ + assert_param(IS_FSMC_NORSRAM_DEVICE(Device)); + assert_param(IS_FSMC_ADDRESS_SETUP_TIME(Timing->AddressSetupTime)); + assert_param(IS_FSMC_ADDRESS_HOLD_TIME(Timing->AddressHoldTime)); + assert_param(IS_FSMC_DATASETUP_TIME(Timing->DataSetupTime)); + assert_param(IS_FSMC_TURNAROUND_TIME(Timing->BusTurnAroundDuration)); + assert_param(IS_FSMC_CLK_DIV(Timing->CLKDivision)); + assert_param(IS_FSMC_DATA_LATENCY(Timing->DataLatency)); + assert_param(IS_FSMC_ACCESS_MODE(Timing->AccessMode)); + assert_param(IS_FSMC_NORSRAM_BANK(Bank)); + + /* Set FSMC_NORSRAM device timing parameters */ + Device->BTCR[Bank + 1U] = + (Timing->AddressSetupTime << FSMC_BTR1_ADDSET_Pos) | + (Timing->AddressHoldTime << FSMC_BTR1_ADDHLD_Pos) | + (Timing->DataSetupTime << FSMC_BTR1_DATAST_Pos) | + (Timing->BusTurnAroundDuration << FSMC_BTR1_BUSTURN_Pos) | + ((Timing->CLKDivision - 1U) << FSMC_BTR1_CLKDIV_Pos) | + ((Timing->DataLatency - 2U) << FSMC_BTR1_DATLAT_Pos) | + Timing->AccessMode; + +#if defined(FSMC_BCR1_CCLKEN) + /* Configure Clock division value (in NORSRAM bank 1) when continuous clock is enabled */ + if (HAL_IS_BIT_SET(Device->BTCR[FSMC_NORSRAM_BANK1], FSMC_BCR1_CCLKEN)) + { + tmpr = (uint32_t)(Device->BTCR[FSMC_NORSRAM_BANK1 + 1U] & ~((0x0FU) << FSMC_BTR1_CLKDIV_Pos)); + tmpr |= (uint32_t)(((Timing->CLKDivision) - 1U) << FSMC_BTR1_CLKDIV_Pos); + MODIFY_REG(Device->BTCR[FSMC_NORSRAM_BANK1 + 1U], FSMC_BTR1_CLKDIV, tmpr); + } + +#endif /* FSMC_BCR1_CCLKEN */ + return HAL_OK; +} + +/** + * @brief Initialize the FSMC_NORSRAM Extended mode Timing according to the specified + * parameters in the FSMC_NORSRAM_TimingTypeDef + * @param Device Pointer to NORSRAM device instance + * @param Timing Pointer to NORSRAM Timing structure + * @param Bank NORSRAM bank number + * @param ExtendedMode FSMC Extended Mode + * This parameter can be one of the following values: + * @arg FSMC_EXTENDED_MODE_DISABLE + * @arg FSMC_EXTENDED_MODE_ENABLE + * @retval HAL status + */ +HAL_StatusTypeDef FSMC_NORSRAM_Extended_Timing_Init(FSMC_NORSRAM_EXTENDED_TypeDef *Device, + const FSMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank, + uint32_t ExtendedMode) +{ + /* Check the parameters */ + assert_param(IS_FSMC_EXTENDED_MODE(ExtendedMode)); + + /* Set NORSRAM device timing register for write configuration, if extended mode is used */ + if (ExtendedMode == FSMC_EXTENDED_MODE_ENABLE) + { + /* Check the parameters */ + assert_param(IS_FSMC_NORSRAM_EXTENDED_DEVICE(Device)); + assert_param(IS_FSMC_ADDRESS_SETUP_TIME(Timing->AddressSetupTime)); + assert_param(IS_FSMC_ADDRESS_HOLD_TIME(Timing->AddressHoldTime)); + assert_param(IS_FSMC_DATASETUP_TIME(Timing->DataSetupTime)); + assert_param(IS_FSMC_TURNAROUND_TIME(Timing->BusTurnAroundDuration)); + assert_param(IS_FSMC_ACCESS_MODE(Timing->AccessMode)); + assert_param(IS_FSMC_NORSRAM_BANK(Bank)); + + /* Set NORSRAM device timing register for write configuration, if extended mode is used */ + MODIFY_REG(Device->BWTR[Bank], BWTR_CLEAR_MASK, (Timing->AddressSetupTime | + ((Timing->AddressHoldTime) << FSMC_BWTR1_ADDHLD_Pos) | + ((Timing->DataSetupTime) << FSMC_BWTR1_DATAST_Pos) | + Timing->AccessMode | + ((Timing->BusTurnAroundDuration) << FSMC_BWTR1_BUSTURN_Pos))); + } + else + { + Device->BWTR[Bank] = 0x0FFFFFFFU; + } + + return HAL_OK; +} +/** + * @} + */ + +/** @addtogroup FSMC_LL_NORSRAM_Private_Functions_Group2 + * @brief management functions + * +@verbatim + ============================================================================== + ##### FSMC_NORSRAM Control functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to control dynamically + the FSMC NORSRAM interface. + +@endverbatim + * @{ + */ + +/** + * @brief Enables dynamically FSMC_NORSRAM write operation. + * @param Device Pointer to NORSRAM device instance + * @param Bank NORSRAM bank number + * @retval HAL status + */ +HAL_StatusTypeDef FSMC_NORSRAM_WriteOperation_Enable(FSMC_NORSRAM_TypeDef *Device, uint32_t Bank) +{ + /* Check the parameters */ + assert_param(IS_FSMC_NORSRAM_DEVICE(Device)); + assert_param(IS_FSMC_NORSRAM_BANK(Bank)); + + /* Enable write operation */ + SET_BIT(Device->BTCR[Bank], FSMC_WRITE_OPERATION_ENABLE); + + return HAL_OK; +} + +/** + * @brief Disables dynamically FSMC_NORSRAM write operation. + * @param Device Pointer to NORSRAM device instance + * @param Bank NORSRAM bank number + * @retval HAL status + */ +HAL_StatusTypeDef FSMC_NORSRAM_WriteOperation_Disable(FSMC_NORSRAM_TypeDef *Device, uint32_t Bank) +{ + /* Check the parameters */ + assert_param(IS_FSMC_NORSRAM_DEVICE(Device)); + assert_param(IS_FSMC_NORSRAM_BANK(Bank)); + + /* Disable write operation */ + CLEAR_BIT(Device->BTCR[Bank], FSMC_WRITE_OPERATION_ENABLE); + + return HAL_OK; +} + +/** + * @} + */ + +/** + * @} + */ +#endif /* FSMC_Bank1 */ + +#if defined(FSMC_Bank2_3) + +/** @defgroup FSMC_LL_Exported_Functions_NAND FSMC Low Layer NAND Exported Functions + * @brief NAND Controller functions + * + @verbatim + ============================================================================== + ##### How to use NAND device driver ##### + ============================================================================== + [..] + This driver contains a set of APIs to interface with the FSMC NAND banks in order + to run the NAND external devices. + + (+) FSMC NAND bank reset using the function FSMC_NAND_DeInit() + (+) FSMC NAND bank control configuration using the function FSMC_NAND_Init() + (+) FSMC NAND bank common space timing configuration using the function + FSMC_NAND_CommonSpace_Timing_Init() + (+) FSMC NAND bank attribute space timing configuration using the function + FSMC_NAND_AttributeSpace_Timing_Init() + (+) FSMC NAND bank enable/disable ECC correction feature using the functions + FSMC_NAND_ECC_Enable()/FSMC_NAND_ECC_Disable() + (+) FSMC NAND bank get ECC correction code using the function FSMC_NAND_GetECC() + +@endverbatim + * @{ + */ + +/** @defgroup FSMC_LL_NAND_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + ============================================================================== + ##### Initialization and de_initialization functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the FSMC NAND interface + (+) De-initialize the FSMC NAND interface + (+) Configure the FSMC clock and associated GPIOs + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the FSMC_NAND device according to the specified + * control parameters in the FSMC_NAND_HandleTypeDef + * @param Device Pointer to NAND device instance + * @param Init Pointer to NAND Initialization structure + * @retval HAL status + */ +HAL_StatusTypeDef FSMC_NAND_Init(FSMC_NAND_TypeDef *Device, const FSMC_NAND_InitTypeDef *Init) +{ + /* Check the parameters */ + assert_param(IS_FSMC_NAND_DEVICE(Device)); + assert_param(IS_FSMC_NAND_BANK(Init->NandBank)); + assert_param(IS_FSMC_WAIT_FEATURE(Init->Waitfeature)); + assert_param(IS_FSMC_NAND_MEMORY_WIDTH(Init->MemoryDataWidth)); + assert_param(IS_FSMC_ECC_STATE(Init->EccComputation)); + assert_param(IS_FSMC_ECCPAGE_SIZE(Init->ECCPageSize)); + assert_param(IS_FSMC_TCLR_TIME(Init->TCLRSetupTime)); + assert_param(IS_FSMC_TAR_TIME(Init->TARSetupTime)); + + /* Set NAND device control parameters */ + if (Init->NandBank == FSMC_NAND_BANK2) + { + /* NAND bank 2 registers configuration */ + MODIFY_REG(Device->PCR2, PCR_CLEAR_MASK, (Init->Waitfeature | + FSMC_PCR_MEMORY_TYPE_NAND | + Init->MemoryDataWidth | + Init->EccComputation | + Init->ECCPageSize | + ((Init->TCLRSetupTime) << FSMC_PCR2_TCLR_Pos) | + ((Init->TARSetupTime) << FSMC_PCR2_TAR_Pos))); + } + else + { + /* NAND bank 3 registers configuration */ + MODIFY_REG(Device->PCR3, PCR_CLEAR_MASK, (Init->Waitfeature | + FSMC_PCR_MEMORY_TYPE_NAND | + Init->MemoryDataWidth | + Init->EccComputation | + Init->ECCPageSize | + ((Init->TCLRSetupTime) << FSMC_PCR2_TCLR_Pos) | + ((Init->TARSetupTime) << FSMC_PCR2_TAR_Pos))); + } + + return HAL_OK; +} + +/** + * @brief Initializes the FSMC_NAND Common space Timing according to the specified + * parameters in the FSMC_NAND_PCC_TimingTypeDef + * @param Device Pointer to NAND device instance + * @param Timing Pointer to NAND timing structure + * @param Bank NAND bank number + * @retval HAL status + */ +HAL_StatusTypeDef FSMC_NAND_CommonSpace_Timing_Init(FSMC_NAND_TypeDef *Device, + const FSMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank) +{ + /* Check the parameters */ + assert_param(IS_FSMC_NAND_DEVICE(Device)); + assert_param(IS_FSMC_SETUP_TIME(Timing->SetupTime)); + assert_param(IS_FSMC_WAIT_TIME(Timing->WaitSetupTime)); + assert_param(IS_FSMC_HOLD_TIME(Timing->HoldSetupTime)); + assert_param(IS_FSMC_HIZ_TIME(Timing->HiZSetupTime)); + assert_param(IS_FSMC_NAND_BANK(Bank)); + + /* Set FSMC_NAND device timing parameters */ + if (Bank == FSMC_NAND_BANK2) + { + /* NAND bank 2 registers configuration */ + WRITE_REG(Device->PMEM2, (Timing->SetupTime | + ((Timing->WaitSetupTime) << FSMC_PMEM2_MEMWAIT2_Pos) | + ((Timing->HoldSetupTime) << FSMC_PMEM2_MEMHOLD2_Pos) | + ((Timing->HiZSetupTime) << FSMC_PMEM2_MEMHIZ2_Pos))); + } + else + { + /* NAND bank 3 registers configuration */ + WRITE_REG(Device->PMEM3, (Timing->SetupTime | + ((Timing->WaitSetupTime) << FSMC_PMEM2_MEMWAIT2_Pos) | + ((Timing->HoldSetupTime) << FSMC_PMEM2_MEMHOLD2_Pos) | + ((Timing->HiZSetupTime) << FSMC_PMEM2_MEMHIZ2_Pos))); + } + + return HAL_OK; +} + +/** + * @brief Initializes the FSMC_NAND Attribute space Timing according to the specified + * parameters in the FSMC_NAND_PCC_TimingTypeDef + * @param Device Pointer to NAND device instance + * @param Timing Pointer to NAND timing structure + * @param Bank NAND bank number + * @retval HAL status + */ +HAL_StatusTypeDef FSMC_NAND_AttributeSpace_Timing_Init(FSMC_NAND_TypeDef *Device, + const FSMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank) +{ + /* Check the parameters */ + assert_param(IS_FSMC_NAND_DEVICE(Device)); + assert_param(IS_FSMC_SETUP_TIME(Timing->SetupTime)); + assert_param(IS_FSMC_WAIT_TIME(Timing->WaitSetupTime)); + assert_param(IS_FSMC_HOLD_TIME(Timing->HoldSetupTime)); + assert_param(IS_FSMC_HIZ_TIME(Timing->HiZSetupTime)); + assert_param(IS_FSMC_NAND_BANK(Bank)); + + /* Set FSMC_NAND device timing parameters */ + if (Bank == FSMC_NAND_BANK2) + { + /* NAND bank 2 registers configuration */ + WRITE_REG(Device->PATT2, (Timing->SetupTime | + ((Timing->WaitSetupTime) << FSMC_PATT2_ATTWAIT2_Pos) | + ((Timing->HoldSetupTime) << FSMC_PATT2_ATTHOLD2_Pos) | + ((Timing->HiZSetupTime) << FSMC_PATT2_ATTHIZ2_Pos))); + } + else + { + /* NAND bank 3 registers configuration */ + WRITE_REG(Device->PATT3, (Timing->SetupTime | + ((Timing->WaitSetupTime) << FSMC_PATT2_ATTWAIT2_Pos) | + ((Timing->HoldSetupTime) << FSMC_PATT2_ATTHOLD2_Pos) | + ((Timing->HiZSetupTime) << FSMC_PATT2_ATTHIZ2_Pos))); + } + + return HAL_OK; +} + +/** + * @brief DeInitializes the FSMC_NAND device + * @param Device Pointer to NAND device instance + * @param Bank NAND bank number + * @retval HAL status + */ +HAL_StatusTypeDef FSMC_NAND_DeInit(FSMC_NAND_TypeDef *Device, uint32_t Bank) +{ + /* Check the parameters */ + assert_param(IS_FSMC_NAND_DEVICE(Device)); + assert_param(IS_FSMC_NAND_BANK(Bank)); + + /* Disable the NAND Bank */ + __FSMC_NAND_DISABLE(Device, Bank); + + /* De-initialize the NAND Bank */ + if (Bank == FSMC_NAND_BANK2) + { + /* Set the FSMC_NAND_BANK2 registers to their reset values */ + WRITE_REG(Device->PCR2, 0x00000018U); + WRITE_REG(Device->SR2, 0x00000040U); + WRITE_REG(Device->PMEM2, 0xFCFCFCFCU); + WRITE_REG(Device->PATT2, 0xFCFCFCFCU); + } + /* FSMC_Bank3_NAND */ + else + { + /* Set the FSMC_NAND_BANK3 registers to their reset values */ + WRITE_REG(Device->PCR3, 0x00000018U); + WRITE_REG(Device->SR3, 0x00000040U); + WRITE_REG(Device->PMEM3, 0xFCFCFCFCU); + WRITE_REG(Device->PATT3, 0xFCFCFCFCU); + } + + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup HAL_FSMC_NAND_Group2 Peripheral Control functions + * @brief management functions + * +@verbatim + ============================================================================== + ##### FSMC_NAND Control functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to control dynamically + the FSMC NAND interface. + +@endverbatim + * @{ + */ + + +/** + * @brief Enables dynamically FSMC_NAND ECC feature. + * @param Device Pointer to NAND device instance + * @param Bank NAND bank number + * @retval HAL status + */ +HAL_StatusTypeDef FSMC_NAND_ECC_Enable(FSMC_NAND_TypeDef *Device, uint32_t Bank) +{ + /* Check the parameters */ + assert_param(IS_FSMC_NAND_DEVICE(Device)); + assert_param(IS_FSMC_NAND_BANK(Bank)); + + /* Enable ECC feature */ + if (Bank == FSMC_NAND_BANK2) + { + SET_BIT(Device->PCR2, FSMC_PCR2_ECCEN); + } + else + { + SET_BIT(Device->PCR3, FSMC_PCR2_ECCEN); + } + + return HAL_OK; +} + + +/** + * @brief Disables dynamically FSMC_NAND ECC feature. + * @param Device Pointer to NAND device instance + * @param Bank NAND bank number + * @retval HAL status + */ +HAL_StatusTypeDef FSMC_NAND_ECC_Disable(FSMC_NAND_TypeDef *Device, uint32_t Bank) +{ + /* Check the parameters */ + assert_param(IS_FSMC_NAND_DEVICE(Device)); + assert_param(IS_FSMC_NAND_BANK(Bank)); + + /* Disable ECC feature */ + if (Bank == FSMC_NAND_BANK2) + { + CLEAR_BIT(Device->PCR2, FSMC_PCR2_ECCEN); + } + else + { + CLEAR_BIT(Device->PCR3, FSMC_PCR2_ECCEN); + } + + return HAL_OK; +} + +/** + * @brief Disables dynamically FSMC_NAND ECC feature. + * @param Device Pointer to NAND device instance + * @param ECCval Pointer to ECC value + * @param Bank NAND bank number + * @param Timeout Timeout wait value + * @retval HAL status + */ +HAL_StatusTypeDef FSMC_NAND_GetECC(const FSMC_NAND_TypeDef *Device, uint32_t *ECCval, uint32_t Bank, + uint32_t Timeout) +{ + uint32_t tickstart; + + /* Check the parameters */ + assert_param(IS_FSMC_NAND_DEVICE(Device)); + assert_param(IS_FSMC_NAND_BANK(Bank)); + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Wait until FIFO is empty */ + while (__FSMC_NAND_GET_FLAG(Device, Bank, FSMC_FLAG_FEMPT) == RESET) + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + return HAL_TIMEOUT; + } + } + } + + if (Bank == FSMC_NAND_BANK2) + { + /* Get the ECCR2 register value */ + *ECCval = (uint32_t)Device->ECCR2; + } + else + { + /* Get the ECCR3 register value */ + *ECCval = (uint32_t)Device->ECCR3; + } + + return HAL_OK; +} + +/** + * @} + */ +#endif /* FSMC_Bank2_3 */ + +#if defined(FSMC_Bank4) + +/** @addtogroup FSMC_LL_PCCARD + * @brief PCCARD Controller functions + * + @verbatim + ============================================================================== + ##### How to use PCCARD device driver ##### + ============================================================================== + [..] + This driver contains a set of APIs to interface with the FSMC PCCARD bank in order + to run the PCCARD/compact flash external devices. + + (+) FSMC PCCARD bank reset using the function FSMC_PCCARD_DeInit() + (+) FSMC PCCARD bank control configuration using the function FSMC_PCCARD_Init() + (+) FSMC PCCARD bank common space timing configuration using the function + FSMC_PCCARD_CommonSpace_Timing_Init() + (+) FSMC PCCARD bank attribute space timing configuration using the function + FSMC_PCCARD_AttributeSpace_Timing_Init() + (+) FSMC PCCARD bank IO space timing configuration using the function + FSMC_PCCARD_IOSpace_Timing_Init() +@endverbatim + * @{ + */ + +/** @addtogroup FSMC_LL_PCCARD_Private_Functions_Group1 + * @brief Initialization and Configuration functions + * +@verbatim + ============================================================================== + ##### Initialization and de_initialization functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the FSMC PCCARD interface + (+) De-initialize the FSMC PCCARD interface + (+) Configure the FSMC clock and associated GPIOs + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the FSMC_PCCARD device according to the specified + * control parameters in the FSMC_PCCARD_HandleTypeDef + * @param Device Pointer to PCCARD device instance + * @param Init Pointer to PCCARD Initialization structure + * @retval HAL status + */ +HAL_StatusTypeDef FSMC_PCCARD_Init(FSMC_PCCARD_TypeDef *Device, const FSMC_PCCARD_InitTypeDef *Init) +{ + /* Check the parameters */ + assert_param(IS_FSMC_PCCARD_DEVICE(Device)); +#if defined(FSMC_Bank2_3) + assert_param(IS_FSMC_WAIT_FEATURE(Init->Waitfeature)); + assert_param(IS_FSMC_TCLR_TIME(Init->TCLRSetupTime)); + assert_param(IS_FSMC_TAR_TIME(Init->TARSetupTime)); +#endif /* FSMC_Bank2_3 */ + + /* Set FSMC_PCCARD device control parameters */ + MODIFY_REG(Device->PCR4, + (FSMC_PCR4_PTYP | + FSMC_PCR4_PWAITEN | + FSMC_PCR4_PWID | + FSMC_PCR4_TCLR | + FSMC_PCR4_TAR), + (FSMC_PCR_MEMORY_TYPE_PCCARD | + Init->Waitfeature | + FSMC_NAND_PCC_MEM_BUS_WIDTH_16 | + (Init->TCLRSetupTime << FSMC_PCR4_TCLR_Pos) | + (Init->TARSetupTime << FSMC_PCR4_TAR_Pos))); + + return HAL_OK; +} + +/** + * @brief Initializes the FSMC_PCCARD Common space Timing according to the specified + * parameters in the FSMC_NAND_PCC_TimingTypeDef + * @param Device Pointer to PCCARD device instance + * @param Timing Pointer to PCCARD timing structure + * @retval HAL status + */ +HAL_StatusTypeDef FSMC_PCCARD_CommonSpace_Timing_Init(FSMC_PCCARD_TypeDef *Device, + const FSMC_NAND_PCC_TimingTypeDef *Timing) +{ + /* Check the parameters */ + assert_param(IS_FSMC_PCCARD_DEVICE(Device)); +#if defined(FSMC_Bank2_3) + assert_param(IS_FSMC_SETUP_TIME(Timing->SetupTime)); + assert_param(IS_FSMC_WAIT_TIME(Timing->WaitSetupTime)); + assert_param(IS_FSMC_HOLD_TIME(Timing->HoldSetupTime)); + assert_param(IS_FSMC_HIZ_TIME(Timing->HiZSetupTime)); +#endif /* FSMC_Bank2_3 */ + + /* Set PCCARD timing parameters */ + WRITE_REG(Device->PMEM4, (Timing->SetupTime | + ((Timing->WaitSetupTime) << FSMC_PMEM4_MEMWAIT4_Pos) | + ((Timing->HoldSetupTime) << FSMC_PMEM4_MEMHOLD4_Pos) | + ((Timing->HiZSetupTime) << FSMC_PMEM4_MEMHIZ4_Pos))); + + return HAL_OK; +} + +/** + * @brief Initializes the FSMC_PCCARD Attribute space Timing according to the specified + * parameters in the FSMC_NAND_PCC_TimingTypeDef + * @param Device Pointer to PCCARD device instance + * @param Timing Pointer to PCCARD timing structure + * @retval HAL status + */ +HAL_StatusTypeDef FSMC_PCCARD_AttributeSpace_Timing_Init(FSMC_PCCARD_TypeDef *Device, + const FSMC_NAND_PCC_TimingTypeDef *Timing) +{ + /* Check the parameters */ + assert_param(IS_FSMC_PCCARD_DEVICE(Device)); +#if defined(FSMC_Bank2_3) + assert_param(IS_FSMC_SETUP_TIME(Timing->SetupTime)); + assert_param(IS_FSMC_WAIT_TIME(Timing->WaitSetupTime)); + assert_param(IS_FSMC_HOLD_TIME(Timing->HoldSetupTime)); + assert_param(IS_FSMC_HIZ_TIME(Timing->HiZSetupTime)); +#endif /* FSMC_Bank2_3 */ + + /* Set PCCARD timing parameters */ + WRITE_REG(Device->PATT4, (Timing->SetupTime | + ((Timing->WaitSetupTime) << FSMC_PATT4_ATTWAIT4_Pos) | + ((Timing->HoldSetupTime) << FSMC_PATT4_ATTHOLD4_Pos) | + ((Timing->HiZSetupTime) << FSMC_PATT4_ATTHIZ4_Pos))); + + return HAL_OK; +} + +/** + * @brief Initializes the FSMC_PCCARD IO space Timing according to the specified + * parameters in the FSMC_NAND_PCC_TimingTypeDef + * @param Device Pointer to PCCARD device instance + * @param Timing Pointer to PCCARD timing structure + * @retval HAL status + */ +HAL_StatusTypeDef FSMC_PCCARD_IOSpace_Timing_Init(FSMC_PCCARD_TypeDef *Device, + const FSMC_NAND_PCC_TimingTypeDef *Timing) +{ + /* Check the parameters */ + assert_param(IS_FSMC_PCCARD_DEVICE(Device)); +#if defined(FSMC_Bank2_3) + assert_param(IS_FSMC_SETUP_TIME(Timing->SetupTime)); + assert_param(IS_FSMC_WAIT_TIME(Timing->WaitSetupTime)); + assert_param(IS_FSMC_HOLD_TIME(Timing->HoldSetupTime)); + assert_param(IS_FSMC_HIZ_TIME(Timing->HiZSetupTime)); +#endif /* FSMC_Bank2_3 */ + + /* Set FSMC_PCCARD device timing parameters */ + WRITE_REG(Device->PIO4, (Timing->SetupTime | + (Timing->WaitSetupTime << FSMC_PIO4_IOWAIT4_Pos) | + (Timing->HoldSetupTime << FSMC_PIO4_IOHOLD4_Pos) | + (Timing->HiZSetupTime << FSMC_PIO4_IOHIZ4_Pos))); + + return HAL_OK; +} + +/** + * @brief DeInitializes the FSMC_PCCARD device + * @param Device Pointer to PCCARD device instance + * @retval HAL status + */ +HAL_StatusTypeDef FSMC_PCCARD_DeInit(FSMC_PCCARD_TypeDef *Device) +{ + /* Check the parameters */ + assert_param(IS_FSMC_PCCARD_DEVICE(Device)); + + /* Disable the FSMC_PCCARD device */ + __FSMC_PCCARD_DISABLE(Device); + + /* De-initialize the FSMC_PCCARD device */ + Device->PCR4 = 0x00000018U; + Device->SR4 = 0x00000040U; + Device->PMEM4 = 0xFCFCFCFCU; + Device->PATT4 = 0xFCFCFCFCU; + Device->PIO4 = 0xFCFCFCFCU; + + return HAL_OK; +} + +/** + * @} + */ +#endif /* FSMC_Bank4 */ + + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_NOR_MODULE_ENABLED */ +/** + * @} + */ +/** + * @} + */ diff --git a/cubemx/EWARM/cubemx.ewp b/cubemx/EWARM/cubemx.ewp index e33458d..4c8d19a 100644 --- a/cubemx/EWARM/cubemx.ewp +++ b/cubemx/EWARM/cubemx.ewp @@ -1078,38 +1078,14 @@ User - $PROJ_DIR$/../C:/RT-ThreadStudio/workspace/828/cubemx/Src/main.c + $PROJ_DIR$/../Src/main.c - $PROJ_DIR$/../C:/RT-ThreadStudio/workspace/828/cubemx/Src/stm32f4xx_it.c + $PROJ_DIR$/../Src/stm32f4xx_it.c - $PROJ_DIR$/../C:/RT-ThreadStudio/workspace/828/cubemx/Src/stm32f4xx_hal_msp.c + $PROJ_DIR$/../Src/stm32f4xx_hal_msp.c - - C: - - RT-ThreadStudio - - workspace - - 828 - - cubemx - - $PROJ_DIR$/../C:/RT-ThreadStudio/workspace/828/cubemx/Src/main.c - - - $PROJ_DIR$/../C:/RT-ThreadStudio/workspace/828/cubemx/Src/stm32f4xx_it.c - - - $PROJ_DIR$/../C:/RT-ThreadStudio/workspace/828/cubemx/Src/stm32f4xx_hal_msp.c - - - - - - @@ -1117,13 +1093,19 @@ STM32F4xx_HAL_Driver - $PROJ_DIR$/../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_sdmmc.c + $PROJ_DIR$/../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_fsmc.c - $PROJ_DIR$/../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sd.c + $PROJ_DIR$/../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_nor.c - $PROJ_DIR$/../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_mmc.c + $PROJ_DIR$/../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sram.c + + + $PROJ_DIR$/../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_nand.c + + + $PROJ_DIR$/../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pccard.c $PROJ_DIR$/../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc.c @@ -1164,6 +1146,18 @@ $PROJ_DIR$/../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_exti.c + + $PROJ_DIR$/../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_sdmmc.c + + + $PROJ_DIR$/../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sd.c + + + $PROJ_DIR$/../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_mmc.c + + + $PROJ_DIR$/../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_uart.c + CMSIS diff --git a/cubemx/Inc/stm32f4xx_hal_conf.h b/cubemx/Inc/stm32f4xx_hal_conf.h index d479be6..2ed55a6 100644 --- a/cubemx/Inc/stm32f4xx_hal_conf.h +++ b/cubemx/Inc/stm32f4xx_hal_conf.h @@ -50,7 +50,7 @@ /* #define HAL_NAND_MODULE_ENABLED */ /* #define HAL_NOR_MODULE_ENABLED */ /* #define HAL_PCCARD_MODULE_ENABLED */ -/* #define HAL_SRAM_MODULE_ENABLED */ +#define HAL_SRAM_MODULE_ENABLED /* #define HAL_SDRAM_MODULE_ENABLED */ /* #define HAL_HASH_MODULE_ENABLED */ /* #define HAL_I2C_MODULE_ENABLED */ diff --git a/cubemx/Src/main.c b/cubemx/Src/main.c index 497ee02..55d22a5 100644 --- a/cubemx/Src/main.c +++ b/cubemx/Src/main.c @@ -42,6 +42,10 @@ /* Private variables ---------------------------------------------------------*/ SD_HandleTypeDef hsd; +UART_HandleTypeDef huart2; + +SRAM_HandleTypeDef hsram1; + /* USER CODE BEGIN PV */ /* USER CODE END PV */ @@ -50,6 +54,8 @@ SD_HandleTypeDef hsd; void SystemClock_Config(void); static void MX_GPIO_Init(void); static void MX_SDIO_SD_Init(void); +static void MX_USART2_UART_Init(void); +static void MX_FSMC_Init(void); /* USER CODE BEGIN PFP */ /* USER CODE END PFP */ @@ -89,6 +95,8 @@ __WEAK int main(void) /* Initialize all configured peripherals */ MX_GPIO_Init(); MX_SDIO_SD_Init(); + MX_USART2_UART_Init(); + MX_FSMC_Init(); /* USER CODE BEGIN 2 */ /* USER CODE END 2 */ @@ -186,6 +194,39 @@ static void MX_SDIO_SD_Init(void) } +/** + * @brief USART2 Initialization Function + * @param None + * @retval None + */ +static void MX_USART2_UART_Init(void) +{ + + /* USER CODE BEGIN USART2_Init 0 */ + + /* USER CODE END USART2_Init 0 */ + + /* USER CODE BEGIN USART2_Init 1 */ + + /* USER CODE END USART2_Init 1 */ + huart2.Instance = USART2; + huart2.Init.BaudRate = 115200; + huart2.Init.WordLength = UART_WORDLENGTH_8B; + huart2.Init.StopBits = UART_STOPBITS_1; + huart2.Init.Parity = UART_PARITY_NONE; + huart2.Init.Mode = UART_MODE_TX_RX; + huart2.Init.HwFlowCtl = UART_HWCONTROL_NONE; + huart2.Init.OverSampling = UART_OVERSAMPLING_16; + if (HAL_UART_Init(&huart2) != HAL_OK) + { + Error_Handler(); + } + /* USER CODE BEGIN USART2_Init 2 */ + + /* USER CODE END USART2_Init 2 */ + +} + /** * @brief GPIO Initialization Function * @param None @@ -198,14 +239,69 @@ static void MX_GPIO_Init(void) /* USER CODE END MX_GPIO_Init_1 */ /* GPIO Ports Clock Enable */ - __HAL_RCC_GPIOC_CLK_ENABLE(); + __HAL_RCC_GPIOA_CLK_ENABLE(); + __HAL_RCC_GPIOE_CLK_ENABLE(); __HAL_RCC_GPIOD_CLK_ENABLE(); + __HAL_RCC_GPIOC_CLK_ENABLE(); /* USER CODE BEGIN MX_GPIO_Init_2 */ /* USER CODE END MX_GPIO_Init_2 */ } +/* FSMC initialization function */ +static void MX_FSMC_Init(void) +{ + + /* USER CODE BEGIN FSMC_Init 0 */ + + /* USER CODE END FSMC_Init 0 */ + + FSMC_NORSRAM_TimingTypeDef Timing = {0}; + + /* USER CODE BEGIN FSMC_Init 1 */ + + /* USER CODE END FSMC_Init 1 */ + + /** Perform the SRAM1 memory initialization sequence + */ + hsram1.Instance = FSMC_NORSRAM_DEVICE; + hsram1.Extended = FSMC_NORSRAM_EXTENDED_DEVICE; + /* hsram1.Init */ + hsram1.Init.NSBank = FSMC_NORSRAM_BANK1; + hsram1.Init.DataAddressMux = FSMC_DATA_ADDRESS_MUX_DISABLE; + hsram1.Init.MemoryType = FSMC_MEMORY_TYPE_SRAM; + hsram1.Init.MemoryDataWidth = FSMC_NORSRAM_MEM_BUS_WIDTH_16; + hsram1.Init.BurstAccessMode = FSMC_BURST_ACCESS_MODE_DISABLE; + hsram1.Init.WaitSignalPolarity = FSMC_WAIT_SIGNAL_POLARITY_LOW; + hsram1.Init.WrapMode = FSMC_WRAP_MODE_DISABLE; + hsram1.Init.WaitSignalActive = FSMC_WAIT_TIMING_BEFORE_WS; + hsram1.Init.WriteOperation = FSMC_WRITE_OPERATION_ENABLE; + hsram1.Init.WaitSignal = FSMC_WAIT_SIGNAL_DISABLE; + hsram1.Init.ExtendedMode = FSMC_EXTENDED_MODE_DISABLE; + hsram1.Init.AsynchronousWait = FSMC_ASYNCHRONOUS_WAIT_DISABLE; + hsram1.Init.WriteBurst = FSMC_WRITE_BURST_DISABLE; + hsram1.Init.PageSize = FSMC_PAGE_SIZE_NONE; + /* Timing */ + Timing.AddressSetupTime = 15; + Timing.AddressHoldTime = 15; + Timing.DataSetupTime = 255; + Timing.BusTurnAroundDuration = 15; + Timing.CLKDivision = 16; + Timing.DataLatency = 17; + Timing.AccessMode = FSMC_ACCESS_MODE_A; + /* ExtTiming */ + + if (HAL_SRAM_Init(&hsram1, &Timing, NULL) != HAL_OK) + { + Error_Handler( ); + } + + /* USER CODE BEGIN FSMC_Init 2 */ + + /* USER CODE END FSMC_Init 2 */ +} + /* USER CODE BEGIN 4 */ /* USER CODE END 4 */ diff --git a/cubemx/Src/stm32f4xx_hal_msp.c b/cubemx/Src/stm32f4xx_hal_msp.c index cf6b2b5..c78e8d7 100644 --- a/cubemx/Src/stm32f4xx_hal_msp.c +++ b/cubemx/Src/stm32f4xx_hal_msp.c @@ -163,6 +163,200 @@ void HAL_SD_MspDeInit(SD_HandleTypeDef* hsd) } +/** + * @brief UART MSP Initialization + * This function configures the hardware resources used in this example + * @param huart: UART handle pointer + * @retval None + */ +void HAL_UART_MspInit(UART_HandleTypeDef* huart) +{ + GPIO_InitTypeDef GPIO_InitStruct = {0}; + if(huart->Instance==USART2) + { + /* USER CODE BEGIN USART2_MspInit 0 */ + + /* USER CODE END USART2_MspInit 0 */ + /* Peripheral clock enable */ + __HAL_RCC_USART2_CLK_ENABLE(); + + __HAL_RCC_GPIOA_CLK_ENABLE(); + /**USART2 GPIO Configuration + PA2 ------> USART2_TX + PA3 ------> USART2_RX + */ + GPIO_InitStruct.Pin = GPIO_PIN_2|GPIO_PIN_3; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF7_USART2; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + /* USER CODE BEGIN USART2_MspInit 1 */ + + /* USER CODE END USART2_MspInit 1 */ + + } + +} + +/** + * @brief UART MSP De-Initialization + * This function freeze the hardware resources used in this example + * @param huart: UART handle pointer + * @retval None + */ +void HAL_UART_MspDeInit(UART_HandleTypeDef* huart) +{ + if(huart->Instance==USART2) + { + /* USER CODE BEGIN USART2_MspDeInit 0 */ + + /* USER CODE END USART2_MspDeInit 0 */ + /* Peripheral clock disable */ + __HAL_RCC_USART2_CLK_DISABLE(); + + /**USART2 GPIO Configuration + PA2 ------> USART2_TX + PA3 ------> USART2_RX + */ + HAL_GPIO_DeInit(GPIOA, GPIO_PIN_2|GPIO_PIN_3); + + /* USER CODE BEGIN USART2_MspDeInit 1 */ + + /* USER CODE END USART2_MspDeInit 1 */ + } + +} + +static uint32_t FSMC_Initialized = 0; + +static void HAL_FSMC_MspInit(void){ + /* USER CODE BEGIN FSMC_MspInit 0 */ + + /* USER CODE END FSMC_MspInit 0 */ + GPIO_InitTypeDef GPIO_InitStruct ={0}; + if (FSMC_Initialized) { + return; + } + FSMC_Initialized = 1; + + /* Peripheral clock enable */ + __HAL_RCC_FSMC_CLK_ENABLE(); + + /** FSMC GPIO Configuration + PE7 ------> FSMC_D4 + PE8 ------> FSMC_D5 + PE9 ------> FSMC_D6 + PE10 ------> FSMC_D7 + PE11 ------> FSMC_D8 + PE12 ------> FSMC_D9 + PE13 ------> FSMC_D10 + PE14 ------> FSMC_D11 + PE15 ------> FSMC_D12 + PD8 ------> FSMC_D13 + PD9 ------> FSMC_D14 + PD10 ------> FSMC_D15 + PD11 ------> FSMC_A16 + PD14 ------> FSMC_D0 + PD15 ------> FSMC_D1 + PD0 ------> FSMC_D2 + PD1 ------> FSMC_D3 + PD4 ------> FSMC_NOE + PD5 ------> FSMC_NWE + PD7 ------> FSMC_NE1 + */ + GPIO_InitStruct.Pin = GPIO_PIN_7|GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10 + |GPIO_PIN_11|GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_14 + |GPIO_PIN_15; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF12_FSMC; + HAL_GPIO_Init(GPIOE, &GPIO_InitStruct); + + GPIO_InitStruct.Pin = GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11 + |GPIO_PIN_14|GPIO_PIN_15|GPIO_PIN_0|GPIO_PIN_1 + |GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_7; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF12_FSMC; + HAL_GPIO_Init(GPIOD, &GPIO_InitStruct); + + /* USER CODE BEGIN FSMC_MspInit 1 */ + + /* USER CODE END FSMC_MspInit 1 */ +} + +void HAL_SRAM_MspInit(SRAM_HandleTypeDef* hsram){ + /* USER CODE BEGIN SRAM_MspInit 0 */ + + /* USER CODE END SRAM_MspInit 0 */ + HAL_FSMC_MspInit(); + /* USER CODE BEGIN SRAM_MspInit 1 */ + + /* USER CODE END SRAM_MspInit 1 */ +} + +static uint32_t FSMC_DeInitialized = 0; + +static void HAL_FSMC_MspDeInit(void){ + /* USER CODE BEGIN FSMC_MspDeInit 0 */ + + /* USER CODE END FSMC_MspDeInit 0 */ + if (FSMC_DeInitialized) { + return; + } + FSMC_DeInitialized = 1; + /* Peripheral clock enable */ + __HAL_RCC_FSMC_CLK_DISABLE(); + + /** FSMC GPIO Configuration + PE7 ------> FSMC_D4 + PE8 ------> FSMC_D5 + PE9 ------> FSMC_D6 + PE10 ------> FSMC_D7 + PE11 ------> FSMC_D8 + PE12 ------> FSMC_D9 + PE13 ------> FSMC_D10 + PE14 ------> FSMC_D11 + PE15 ------> FSMC_D12 + PD8 ------> FSMC_D13 + PD9 ------> FSMC_D14 + PD10 ------> FSMC_D15 + PD11 ------> FSMC_A16 + PD14 ------> FSMC_D0 + PD15 ------> FSMC_D1 + PD0 ------> FSMC_D2 + PD1 ------> FSMC_D3 + PD4 ------> FSMC_NOE + PD5 ------> FSMC_NWE + PD7 ------> FSMC_NE1 + */ + HAL_GPIO_DeInit(GPIOE, GPIO_PIN_7|GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10 + |GPIO_PIN_11|GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_14 + |GPIO_PIN_15); + + HAL_GPIO_DeInit(GPIOD, GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11 + |GPIO_PIN_14|GPIO_PIN_15|GPIO_PIN_0|GPIO_PIN_1 + |GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_7); + + /* USER CODE BEGIN FSMC_MspDeInit 1 */ + + /* USER CODE END FSMC_MspDeInit 1 */ +} + +void HAL_SRAM_MspDeInit(SRAM_HandleTypeDef* hsram){ + /* USER CODE BEGIN SRAM_MspDeInit 0 */ + + /* USER CODE END SRAM_MspDeInit 0 */ + HAL_FSMC_MspDeInit(); + /* USER CODE BEGIN SRAM_MspDeInit 1 */ + + /* USER CODE END SRAM_MspDeInit 1 */ +} + /* USER CODE BEGIN 1 */ /* USER CODE END 1 */ diff --git a/cubemx/cubemx.ioc b/cubemx/cubemx.ioc index 6026b8e..dfc2fef 100644 --- a/cubemx/cubemx.ioc +++ b/cubemx/cubemx.ioc @@ -7,21 +7,45 @@ GPIO.groupedBy= KeepUserPlacement=false Mcu.CPN=STM32F407ZGT6 Mcu.Family=STM32F4 -Mcu.IP0=NVIC -Mcu.IP1=RCC -Mcu.IP2=SDIO -Mcu.IP3=SYS -Mcu.IPNb=4 +Mcu.IP0=FSMC +Mcu.IP1=NVIC +Mcu.IP2=RCC +Mcu.IP3=SDIO +Mcu.IP4=SYS +Mcu.IP5=USART2 +Mcu.IPNb=6 Mcu.Name=STM32F407Z(E-G)Tx Mcu.Package=LQFP144 -Mcu.Pin0=PC8 -Mcu.Pin1=PC9 -Mcu.Pin2=PC10 -Mcu.Pin3=PC11 -Mcu.Pin4=PC12 -Mcu.Pin5=PD2 -Mcu.Pin6=VP_SYS_VS_Systick -Mcu.PinsNb=7 +Mcu.Pin0=PA2 +Mcu.Pin1=PA3 +Mcu.Pin10=PE15 +Mcu.Pin11=PD8 +Mcu.Pin12=PD9 +Mcu.Pin13=PD10 +Mcu.Pin14=PD11 +Mcu.Pin15=PD14 +Mcu.Pin16=PD15 +Mcu.Pin17=PC8 +Mcu.Pin18=PC9 +Mcu.Pin19=PC10 +Mcu.Pin2=PE7 +Mcu.Pin20=PC11 +Mcu.Pin21=PC12 +Mcu.Pin22=PD0 +Mcu.Pin23=PD1 +Mcu.Pin24=PD2 +Mcu.Pin25=PD4 +Mcu.Pin26=PD5 +Mcu.Pin27=PD7 +Mcu.Pin28=VP_SYS_VS_Systick +Mcu.Pin3=PE8 +Mcu.Pin4=PE9 +Mcu.Pin5=PE10 +Mcu.Pin6=PE11 +Mcu.Pin7=PE12 +Mcu.Pin8=PE13 +Mcu.Pin9=PE14 +Mcu.PinsNb=29 Mcu.ThirdPartyNb=0 Mcu.UserConstants= Mcu.UserName=STM32F407ZGTx @@ -38,6 +62,10 @@ NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4 NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false NVIC.SysTick_IRQn=true\:15\:0\:false\:false\:true\:false\:true\:false NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false +PA2.Mode=Asynchronous +PA2.Signal=USART2_TX +PA3.Mode=Asynchronous +PA3.Signal=USART2_RX PC10.Mode=SD_4_bits_Wide_bus PC10.Signal=SDIO_D2 PC11.Mode=SD_4_bits_Wide_bus @@ -48,8 +76,29 @@ PC8.Mode=SD_4_bits_Wide_bus PC8.Signal=SDIO_D0 PC9.Mode=SD_4_bits_Wide_bus PC9.Signal=SDIO_D1 +PD0.Signal=FSMC_D2_DA2 +PD1.Signal=FSMC_D3_DA3 +PD10.Signal=FSMC_D15_DA15 +PD11.Signal=FSMC_A16_CLE +PD14.Signal=FSMC_D0_DA0 +PD15.Signal=FSMC_D1_DA1 PD2.Mode=SD_4_bits_Wide_bus PD2.Signal=SDIO_CMD +PD4.Signal=FSMC_NOE +PD5.Signal=FSMC_NWE +PD7.Mode=NorPsramChipSelect1_1 +PD7.Signal=FSMC_NE1 +PD8.Signal=FSMC_D13_DA13 +PD9.Signal=FSMC_D14_DA14 +PE10.Signal=FSMC_D7_DA7 +PE11.Signal=FSMC_D8_DA8 +PE12.Signal=FSMC_D9_DA9 +PE13.Signal=FSMC_D10_DA10 +PE14.Signal=FSMC_D11_DA11 +PE15.Signal=FSMC_D12_DA12 +PE7.Signal=FSMC_D4_DA4 +PE8.Signal=FSMC_D5_DA5 +PE9.Signal=FSMC_D6_DA6 PinOutPanel.RotationAngle=0 ProjectManager.AskForMigrate=true ProjectManager.BackupPrevious=false @@ -82,7 +131,7 @@ ProjectManager.ToolChainLocation= ProjectManager.UAScriptAfterPath= ProjectManager.UAScriptBeforePath= ProjectManager.UnderRoot=false -ProjectManager.functionlistsort=1-SystemClock_Config-RCC-false-HAL-false +ProjectManager.functionlistsort=1-SystemClock_Config-RCC-false-HAL-false,2-MX_GPIO_Init-GPIO-false-HAL-true,3-MX_SDIO_SD_Init-SDIO-false-HAL-true,4-MX_USART2_UART_Init-USART2-false-HAL-true,5-MX_FSMC_Init-FSMC-false-HAL-true RCC.48MHZClocksFreq_Value=48000000 RCC.AHBFreq_Value=168000000 RCC.APB1CLKDivider=RCC_HCLK_DIV4 @@ -116,6 +165,46 @@ RCC.VCOI2SOutputFreq_Value=384000000 RCC.VCOInputFreq_Value=2000000 RCC.VCOOutputFreq_Value=336000000 RCC.VcooutputI2S=192000000 +SH.FSMC_A16_CLE.0=FSMC_A16,A16_1 +SH.FSMC_A16_CLE.ConfNb=1 +SH.FSMC_D0_DA0.0=FSMC_D0,16b-d1 +SH.FSMC_D0_DA0.ConfNb=1 +SH.FSMC_D10_DA10.0=FSMC_D10,16b-d1 +SH.FSMC_D10_DA10.ConfNb=1 +SH.FSMC_D11_DA11.0=FSMC_D11,16b-d1 +SH.FSMC_D11_DA11.ConfNb=1 +SH.FSMC_D12_DA12.0=FSMC_D12,16b-d1 +SH.FSMC_D12_DA12.ConfNb=1 +SH.FSMC_D13_DA13.0=FSMC_D13,16b-d1 +SH.FSMC_D13_DA13.ConfNb=1 +SH.FSMC_D14_DA14.0=FSMC_D14,16b-d1 +SH.FSMC_D14_DA14.ConfNb=1 +SH.FSMC_D15_DA15.0=FSMC_D15,16b-d1 +SH.FSMC_D15_DA15.ConfNb=1 +SH.FSMC_D1_DA1.0=FSMC_D1,16b-d1 +SH.FSMC_D1_DA1.ConfNb=1 +SH.FSMC_D2_DA2.0=FSMC_D2,16b-d1 +SH.FSMC_D2_DA2.ConfNb=1 +SH.FSMC_D3_DA3.0=FSMC_D3,16b-d1 +SH.FSMC_D3_DA3.ConfNb=1 +SH.FSMC_D4_DA4.0=FSMC_D4,16b-d1 +SH.FSMC_D4_DA4.ConfNb=1 +SH.FSMC_D5_DA5.0=FSMC_D5,16b-d1 +SH.FSMC_D5_DA5.ConfNb=1 +SH.FSMC_D6_DA6.0=FSMC_D6,16b-d1 +SH.FSMC_D6_DA6.ConfNb=1 +SH.FSMC_D7_DA7.0=FSMC_D7,16b-d1 +SH.FSMC_D7_DA7.ConfNb=1 +SH.FSMC_D8_DA8.0=FSMC_D8,16b-d1 +SH.FSMC_D8_DA8.ConfNb=1 +SH.FSMC_D9_DA9.0=FSMC_D9,16b-d1 +SH.FSMC_D9_DA9.ConfNb=1 +SH.FSMC_NOE.0=FSMC_NOE,Lcd1 +SH.FSMC_NOE.ConfNb=1 +SH.FSMC_NWE.0=FSMC_NWE,Lcd1 +SH.FSMC_NWE.ConfNb=1 +USART2.IPParameters=VirtualMode +USART2.VirtualMode=VM_ASYNC VP_SYS_VS_Systick.Mode=SysTick VP_SYS_VS_Systick.Signal=SYS_VS_Systick board=custom diff --git a/drivers/board.c b/drivers/board.c index 370caac..e9d093a 100644 --- a/drivers/board.c +++ b/drivers/board.c @@ -34,3 +34,4 @@ RT_WEAK void rt_hw_board_init() #endif } + diff --git a/exclude_list.json b/exclude_list.json new file mode 100644 index 0000000..9d4bede --- /dev/null +++ b/exclude_list.json @@ -0,0 +1 @@ +[{"config_name":"Debug","exclude_files":["applications/LVGL"]}] \ No newline at end of file diff --git a/packages/lv_music_demo-latest b/packages/lv_music_demo-latest new file mode 160000 --- /dev/null +++ b/packages/lv_music_demo-latest @@ -0,0 +1 @@ +Subproject commit 0000000000000000000000000000000000000000 diff --git a/packages/packages.dbsqlite b/packages/packages.dbsqlite index 3b94437..4ffb657 100644 Binary files a/packages/packages.dbsqlite and b/packages/packages.dbsqlite differ diff --git a/packages/pkgs.json b/packages/pkgs.json index 9abb50a..1478b3b 100644 --- a/packages/pkgs.json +++ b/packages/pkgs.json @@ -4,6 +4,16 @@ "ver": "v1.7.17", "name": "CJSON" }, + { + "path": "/packages/multimedia/LVGL/LVGL", + "ver": "v8.3.0", + "name": "LVGL" + }, + { + "path": "/packages/multimedia/LVGL/gui_guider_demo", + "ver": "latest", + "name": "GUI_GUIDER_DEMO" + }, { "path": "/packages/system/sqlite", "ver": "v3.19.3", diff --git a/rtconfig.h b/rtconfig.h index 4cfa15d..6025a4a 100644 --- a/rtconfig.h +++ b/rtconfig.h @@ -131,14 +131,22 @@ #define RT_USING_POSIX_FS #define RT_USING_POSIX_DEVIO +#define RT_USING_POSIX_POLL +#define RT_USING_POSIX_DELAY +#define RT_USING_POSIX_CLOCK /* Interprocess Communication (IPC) */ +#define RT_USING_POSIX_PIPE +#define RT_USING_POSIX_PIPE_SIZE 512 +#define RT_USING_POSIX_MESSAGE_QUEUE +#define RT_USING_POSIX_MESSAGE_SEMAPHORE /* Socket is in the 'Network' category */ /* end of Interprocess Communication (IPC) */ /* end of POSIX (Portable Operating System Interface) layer */ +#define RT_USING_CPLUSPLUS /* end of C/C++ and POSIX layer */ /* Network */ @@ -236,8 +244,6 @@ #define PKG_SQLITE_SQL_MAX_LEN 1024 #define PKG_SQLITE_DB_NAME_MAX_LEN 64 #define PKG_USING_SQLITE_V3193 -#define PKG_USING_UART_FRAMEWORK -#define PKG_USING_UART_FRAMEWORK_LATEST_VERSION /* end of system packages */ /* peripheral libraries and drivers */ diff --git a/rtconfig_preinc.h b/rtconfig_preinc.h index beb5089..bb88aa5 100644 --- a/rtconfig_preinc.h +++ b/rtconfig_preinc.h @@ -9,5 +9,6 @@ #define RT_USING_NEWLIB #define _POSIX_C_SOURCE 1 #define __RTTHREAD__ +#define _REENT_SMALL #endif /*RTCONFIG_PREINC_H__*/