添加的dio状态

语言设置

applications/data/SC828_DATA_table.c

@@ -105,6 +105,12 @@ IO_State_DIO di_table[] = {
     {2080, 0, STR_MATERIAL3_FILL},
     {2081, 0, STR_MATERIAL3_HEAT},
     {2082, 0, STR_MATERIAL3_STIR},
+    {2083, 0, STR_NULL},
+    {2084, 0, STR_NULL},
+    {2085, 0, STR_NULL},
+    {2086, 0, STR_NULL},
+    {2087, 0, STR_NULL},
+    {2088, 0, STR_NULL},
 };
     // --- DIO 输出（3001~3066）---
 IO_State_DIO do_table[] = {
@@ -174,6 +180,8 @@ IO_State_DIO do_table[] = {
 {3064, 0, STR_DRAIN_PUMP},             // 排水泵
 {3065, 0, STR_HEAT_EXCHANGER_CONDENSATE}, // 热交换器冷凝水
 {3066, 0, STR_HEAT_EXCHANGER_COOLING_WATER}, // 交换器排冷却水		
+{2067, 0, STR_NULL},
+{2068, 0, STR_NULL},
 };
 
 //AIO状态表

applications/data/SC828_DATA_table.h

@@ -4,6 +4,7 @@
 #include <rtthread.h>
 #include "stdbool.h"
 #include "language.h"
+#include <lvgl.h>
 
 // IO状态结构体（可扩展）
 typedef struct {
@@ -68,4 +69,8 @@ extern const unsigned char DATA_TABLE_SIZE;
 void DATA_Table_Init(void);//
 void DATA_INSTRUCTION_START(char p[25]);
 void DATA_INSTRUCTION_STOP();
+
+rt_int16_t get_ai_value(int pin);
+void get_ao_value(int pin,int16_t dat);
+
 #endif

applications/data/language.c

@@ -200,7 +200,8 @@ static const char *text_en[STR_COUNT] = {
     [STR_MAIN_PUMP_SPEED_SET]       = "Main Pump Speed Setpoint",
     [STR_FAN_SPEED_SET]             = "Fan Speed Setpoint",
     [STR_TARGET_PH_SET]             = "Target pH Setpoint",
-    [STR_PH_DEVICE_STATUS]          = "pH Device Status"		
+    [STR_PH_DEVICE_STATUS]          = "pH Device Status",
+    [STR_NULL]          = "NULL"
 };
 
 // 中文字符串（UTF-8 编码）
@@ -399,7 +400,8 @@ static const char *text_zh[STR_COUNT] = {
     [STR_MAIN_PUMP_SPEED_SET]       = "\xE4\xB8\xBB\xE6\xB3\xB5\xE9\x80\x9F\xE5\xBA\xA6\xE8\xAE\xBE\xE5\xAE\x9A", // "主泵速度设定"
     [STR_FAN_SPEED_SET]             = "\xE9\xA3\x8E\xE6\x9C\xBA\xE9\x80\x9F\xE5\xBA\xA6\xE8\xAE\xBE\xE5\xAE\x9A", // "风机速度设定"
     [STR_TARGET_PH_SET]             = "\xE7\x9B\xAE\xE6\xA0\x87PH\xE8\xAE\xBE\xE5\xAE\x9A",                     // "目标PH设定"
-    [STR_PH_DEVICE_STATUS]          = "PH\xE8\xAE\xBE\xE5\xA4\x87\xE7\x8A\xB6\xE6\x80\x81"                      // "PH设备状态"
+    [STR_PH_DEVICE_STATUS]          = "PH\xE8\xAE\xBE\xE5\xA4\x87\xE7\x8A\xB6\xE6\x80\x81",                      // "PH设备状态"
+    [STR_NULL]          = "NULL"                      // ""
 };
 
 

applications/data/language.h

@@ -198,6 +198,7 @@ typedef enum {
     STR_FAN_SPEED_SET,
     STR_TARGET_PH_SET,
     STR_PH_DEVICE_STATUS,
+    STR_NULL,
     STR_COUNT		// 自动计数
 } str_id_t;