添加串口设置
添加sdio
This commit is contained in:
sc committed
1 parent
90c74bc31a
commit
e1d94985a4
30 files changed
+32276
-86
No files matched your search
@@ -41,6 +41,11 @@
|
||||
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
|
||||
SD_HandleTypeDef hsd1;
|
||||
|
||||
UART_HandleTypeDef huart1;
|
||||
UART_HandleTypeDef huart2;
|
||||
|
||||
SDRAM_HandleTypeDef hsdram1;
|
||||
|
||||
/* USER CODE BEGIN PV */
|
||||
@@ -52,6 +57,9 @@ void SystemClock_Config(void);
|
||||
static void MPU_Config(void);
|
||||
static void MX_GPIO_Init(void);
|
||||
static void MX_FMC_Init(void);
|
||||
static void MX_SDMMC1_SD_Init(void);
|
||||
static void MX_USART1_UART_Init(void);
|
||||
static void MX_USART2_UART_Init(void);
|
||||
/* USER CODE BEGIN PFP */
|
||||
|
||||
/* USER CODE END PFP */
|
||||
@@ -94,6 +102,9 @@ __WEAK int main(void)
|
||||
/* Initialize all configured peripherals */
|
||||
MX_GPIO_Init();
|
||||
MX_FMC_Init();
|
||||
MX_SDMMC1_SD_Init();
|
||||
MX_USART1_UART_Init();
|
||||
MX_USART2_UART_Init();
|
||||
/* USER CODE BEGIN 2 */
|
||||
|
||||
/* USER CODE END 2 */
|
||||
@@ -168,6 +179,133 @@ void SystemClock_Config(void)
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief SDMMC1 Initialization Function
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
static void MX_SDMMC1_SD_Init(void)
|
||||
{
|
||||
|
||||
/* USER CODE BEGIN SDMMC1_Init 0 */
|
||||
|
||||
/* USER CODE END SDMMC1_Init 0 */
|
||||
|
||||
/* USER CODE BEGIN SDMMC1_Init 1 */
|
||||
|
||||
/* USER CODE END SDMMC1_Init 1 */
|
||||
hsd1.Instance = SDMMC1;
|
||||
hsd1.Init.ClockEdge = SDMMC_CLOCK_EDGE_RISING;
|
||||
hsd1.Init.ClockPowerSave = SDMMC_CLOCK_POWER_SAVE_DISABLE;
|
||||
hsd1.Init.BusWide = SDMMC_BUS_WIDE_4B;
|
||||
hsd1.Init.HardwareFlowControl = SDMMC_HARDWARE_FLOW_CONTROL_DISABLE;
|
||||
hsd1.Init.ClockDiv = 0;
|
||||
if (HAL_SD_Init(&hsd1) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
/* USER CODE BEGIN SDMMC1_Init 2 */
|
||||
|
||||
/* USER CODE END SDMMC1_Init 2 */
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief USART1 Initialization Function
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
static void MX_USART1_UART_Init(void)
|
||||
{
|
||||
|
||||
/* USER CODE BEGIN USART1_Init 0 */
|
||||
|
||||
/* USER CODE END USART1_Init 0 */
|
||||
|
||||
/* USER CODE BEGIN USART1_Init 1 */
|
||||
|
||||
/* USER CODE END USART1_Init 1 */
|
||||
huart1.Instance = USART1;
|
||||
huart1.Init.BaudRate = 115200;
|
||||
huart1.Init.WordLength = UART_WORDLENGTH_8B;
|
||||
huart1.Init.StopBits = UART_STOPBITS_1;
|
||||
huart1.Init.Parity = UART_PARITY_NONE;
|
||||
huart1.Init.Mode = UART_MODE_TX_RX;
|
||||
huart1.Init.HwFlowCtl = UART_HWCONTROL_NONE;
|
||||
huart1.Init.OverSampling = UART_OVERSAMPLING_16;
|
||||
huart1.Init.OneBitSampling = UART_ONE_BIT_SAMPLE_DISABLE;
|
||||
huart1.Init.ClockPrescaler = UART_PRESCALER_DIV1;
|
||||
huart1.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT;
|
||||
if (HAL_UART_Init(&huart1) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
if (HAL_UARTEx_SetTxFifoThreshold(&huart1, UART_TXFIFO_THRESHOLD_1_8) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
if (HAL_UARTEx_SetRxFifoThreshold(&huart1, UART_RXFIFO_THRESHOLD_1_8) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
if (HAL_UARTEx_DisableFifoMode(&huart1) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
/* USER CODE BEGIN USART1_Init 2 */
|
||||
|
||||
/* USER CODE END USART1_Init 2 */
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief USART2 Initialization Function
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
static void MX_USART2_UART_Init(void)
|
||||
{
|
||||
|
||||
/* USER CODE BEGIN USART2_Init 0 */
|
||||
|
||||
/* USER CODE END USART2_Init 0 */
|
||||
|
||||
/* USER CODE BEGIN USART2_Init 1 */
|
||||
|
||||
/* USER CODE END USART2_Init 1 */
|
||||
huart2.Instance = USART2;
|
||||
huart2.Init.BaudRate = 115200;
|
||||
huart2.Init.WordLength = UART_WORDLENGTH_8B;
|
||||
huart2.Init.StopBits = UART_STOPBITS_1;
|
||||
huart2.Init.Parity = UART_PARITY_NONE;
|
||||
huart2.Init.Mode = UART_MODE_TX_RX;
|
||||
huart2.Init.HwFlowCtl = UART_HWCONTROL_NONE;
|
||||
huart2.Init.OverSampling = UART_OVERSAMPLING_16;
|
||||
huart2.Init.OneBitSampling = UART_ONE_BIT_SAMPLE_DISABLE;
|
||||
huart2.Init.ClockPrescaler = UART_PRESCALER_DIV1;
|
||||
huart2.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT;
|
||||
if (HAL_UART_Init(&huart2) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
if (HAL_UARTEx_SetTxFifoThreshold(&huart2, UART_TXFIFO_THRESHOLD_1_8) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
if (HAL_UARTEx_SetRxFifoThreshold(&huart2, UART_RXFIFO_THRESHOLD_1_8) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
if (HAL_UARTEx_DisableFifoMode(&huart2) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
/* USER CODE BEGIN USART2_Init 2 */
|
||||
|
||||
/* USER CODE END USART2_Init 2 */
|
||||
|
||||
}
|
||||
|
||||
/* FMC initialization function */
|
||||
static void MX_FMC_Init(void)
|
||||
{
|
||||
@@ -222,6 +360,7 @@ static void MX_FMC_Init(void)
|
||||
*/
|
||||
static void MX_GPIO_Init(void)
|
||||
{
|
||||
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
||||
/* USER CODE BEGIN MX_GPIO_Init_1 */
|
||||
|
||||
/* USER CODE END MX_GPIO_Init_1 */
|
||||
@@ -229,11 +368,23 @@ static void MX_GPIO_Init(void)
|
||||
/* GPIO Ports Clock Enable */
|
||||
__HAL_RCC_GPIOF_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOC_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOA_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOH_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOB_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOG_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOE_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOD_CLK_ENABLE();
|
||||
|
||||
/*Configure GPIO pin Output Level */
|
||||
HAL_GPIO_WritePin(GPIOB, GPIO_PIN_0|GPIO_PIN_1, GPIO_PIN_RESET);
|
||||
|
||||
/*Configure GPIO pins : PB0 PB1 */
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
||||
|
||||
/* USER CODE BEGIN MX_GPIO_Init_2 */
|
||||
|
||||
/* USER CODE END MX_GPIO_Init_2 */
|
||||
|
||||
@@ -76,6 +76,254 @@ void HAL_MspInit(void)
|
||||
/* USER CODE END MspInit 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief SD MSP Initialization
|
||||
* This function configures the hardware resources used in this example
|
||||
* @param hsd: SD handle pointer
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_SD_MspInit(SD_HandleTypeDef* hsd)
|
||||
{
|
||||
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
||||
RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0};
|
||||
if(hsd->Instance==SDMMC1)
|
||||
{
|
||||
/* USER CODE BEGIN SDMMC1_MspInit 0 */
|
||||
|
||||
/* USER CODE END SDMMC1_MspInit 0 */
|
||||
|
||||
/** Initializes the peripherals clock
|
||||
*/
|
||||
PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_SDMMC;
|
||||
PeriphClkInitStruct.PLL2.PLL2M = 32;
|
||||
PeriphClkInitStruct.PLL2.PLL2N = 150;
|
||||
PeriphClkInitStruct.PLL2.PLL2P = 2;
|
||||
PeriphClkInitStruct.PLL2.PLL2Q = 2;
|
||||
PeriphClkInitStruct.PLL2.PLL2R = 2;
|
||||
PeriphClkInitStruct.PLL2.PLL2RGE = RCC_PLL2VCIRANGE_1;
|
||||
PeriphClkInitStruct.PLL2.PLL2VCOSEL = RCC_PLL2VCOWIDE;
|
||||
PeriphClkInitStruct.PLL2.PLL2FRACN = 0;
|
||||
PeriphClkInitStruct.SdmmcClockSelection = RCC_SDMMCCLKSOURCE_PLL2;
|
||||
if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
|
||||
/* Peripheral clock enable */
|
||||
__HAL_RCC_SDMMC1_CLK_ENABLE();
|
||||
|
||||
__HAL_RCC_GPIOC_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOD_CLK_ENABLE();
|
||||
/**SDMMC1 GPIO Configuration
|
||||
PC8 ------> SDMMC1_D0
|
||||
PC9 ------> SDMMC1_D1
|
||||
PC10 ------> SDMMC1_D2
|
||||
PC11 ------> SDMMC1_D3
|
||||
PC12 ------> SDMMC1_CK
|
||||
PD2 ------> SDMMC1_CMD
|
||||
*/
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11
|
||||
|GPIO_PIN_12;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
||||
GPIO_InitStruct.Alternate = GPIO_AF12_SDIO1;
|
||||
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
||||
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_2;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
||||
GPIO_InitStruct.Alternate = GPIO_AF12_SDIO1;
|
||||
HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
|
||||
|
||||
/* SDMMC1 interrupt Init */
|
||||
HAL_NVIC_SetPriority(SDMMC1_IRQn, 0, 0);
|
||||
HAL_NVIC_EnableIRQ(SDMMC1_IRQn);
|
||||
/* USER CODE BEGIN SDMMC1_MspInit 1 */
|
||||
|
||||
/* USER CODE END SDMMC1_MspInit 1 */
|
||||
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief SD MSP De-Initialization
|
||||
* This function freeze the hardware resources used in this example
|
||||
* @param hsd: SD handle pointer
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_SD_MspDeInit(SD_HandleTypeDef* hsd)
|
||||
{
|
||||
if(hsd->Instance==SDMMC1)
|
||||
{
|
||||
/* USER CODE BEGIN SDMMC1_MspDeInit 0 */
|
||||
|
||||
/* USER CODE END SDMMC1_MspDeInit 0 */
|
||||
/* Peripheral clock disable */
|
||||
__HAL_RCC_SDMMC1_CLK_DISABLE();
|
||||
|
||||
/**SDMMC1 GPIO Configuration
|
||||
PC8 ------> SDMMC1_D0
|
||||
PC9 ------> SDMMC1_D1
|
||||
PC10 ------> SDMMC1_D2
|
||||
PC11 ------> SDMMC1_D3
|
||||
PC12 ------> SDMMC1_CK
|
||||
PD2 ------> SDMMC1_CMD
|
||||
*/
|
||||
HAL_GPIO_DeInit(GPIOC, GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11
|
||||
|GPIO_PIN_12);
|
||||
|
||||
HAL_GPIO_DeInit(GPIOD, GPIO_PIN_2);
|
||||
|
||||
/* SDMMC1 interrupt DeInit */
|
||||
HAL_NVIC_DisableIRQ(SDMMC1_IRQn);
|
||||
/* USER CODE BEGIN SDMMC1_MspDeInit 1 */
|
||||
|
||||
/* USER CODE END SDMMC1_MspDeInit 1 */
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief UART MSP Initialization
|
||||
* This function configures the hardware resources used in this example
|
||||
* @param huart: UART handle pointer
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_UART_MspInit(UART_HandleTypeDef* huart)
|
||||
{
|
||||
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
||||
RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0};
|
||||
if(huart->Instance==USART1)
|
||||
{
|
||||
/* USER CODE BEGIN USART1_MspInit 0 */
|
||||
|
||||
/* USER CODE END USART1_MspInit 0 */
|
||||
|
||||
/** Initializes the peripherals clock
|
||||
*/
|
||||
PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USART1;
|
||||
PeriphClkInitStruct.Usart16ClockSelection = RCC_USART16CLKSOURCE_D2PCLK2;
|
||||
if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
|
||||
/* Peripheral clock enable */
|
||||
__HAL_RCC_USART1_CLK_ENABLE();
|
||||
|
||||
__HAL_RCC_GPIOB_CLK_ENABLE();
|
||||
/**USART1 GPIO Configuration
|
||||
PB14 ------> USART1_TX
|
||||
PB15 ------> USART1_RX
|
||||
*/
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_14|GPIO_PIN_15;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||
GPIO_InitStruct.Alternate = GPIO_AF4_USART1;
|
||||
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
||||
|
||||
/* USART1 interrupt Init */
|
||||
HAL_NVIC_SetPriority(USART1_IRQn, 0, 0);
|
||||
HAL_NVIC_EnableIRQ(USART1_IRQn);
|
||||
/* USER CODE BEGIN USART1_MspInit 1 */
|
||||
|
||||
/* USER CODE END USART1_MspInit 1 */
|
||||
}
|
||||
else if(huart->Instance==USART2)
|
||||
{
|
||||
/* USER CODE BEGIN USART2_MspInit 0 */
|
||||
|
||||
/* USER CODE END USART2_MspInit 0 */
|
||||
|
||||
/** Initializes the peripherals clock
|
||||
*/
|
||||
PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USART2;
|
||||
PeriphClkInitStruct.Usart234578ClockSelection = RCC_USART234578CLKSOURCE_D2PCLK1;
|
||||
if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
|
||||
/* Peripheral clock enable */
|
||||
__HAL_RCC_USART2_CLK_ENABLE();
|
||||
|
||||
__HAL_RCC_GPIOA_CLK_ENABLE();
|
||||
/**USART2 GPIO Configuration
|
||||
PA2 ------> USART2_TX
|
||||
PA3 ------> USART2_RX
|
||||
*/
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_2|GPIO_PIN_3;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||
GPIO_InitStruct.Alternate = GPIO_AF7_USART2;
|
||||
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
||||
|
||||
/* USART2 interrupt Init */
|
||||
HAL_NVIC_SetPriority(USART2_IRQn, 0, 0);
|
||||
HAL_NVIC_EnableIRQ(USART2_IRQn);
|
||||
/* USER CODE BEGIN USART2_MspInit 1 */
|
||||
|
||||
/* USER CODE END USART2_MspInit 1 */
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief UART MSP De-Initialization
|
||||
* This function freeze the hardware resources used in this example
|
||||
* @param huart: UART handle pointer
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
|
||||
{
|
||||
if(huart->Instance==USART1)
|
||||
{
|
||||
/* USER CODE BEGIN USART1_MspDeInit 0 */
|
||||
|
||||
/* USER CODE END USART1_MspDeInit 0 */
|
||||
/* Peripheral clock disable */
|
||||
__HAL_RCC_USART1_CLK_DISABLE();
|
||||
|
||||
/**USART1 GPIO Configuration
|
||||
PB14 ------> USART1_TX
|
||||
PB15 ------> USART1_RX
|
||||
*/
|
||||
HAL_GPIO_DeInit(GPIOB, GPIO_PIN_14|GPIO_PIN_15);
|
||||
|
||||
/* USART1 interrupt DeInit */
|
||||
HAL_NVIC_DisableIRQ(USART1_IRQn);
|
||||
/* USER CODE BEGIN USART1_MspDeInit 1 */
|
||||
|
||||
/* USER CODE END USART1_MspDeInit 1 */
|
||||
}
|
||||
else if(huart->Instance==USART2)
|
||||
{
|
||||
/* USER CODE BEGIN USART2_MspDeInit 0 */
|
||||
|
||||
/* USER CODE END USART2_MspDeInit 0 */
|
||||
/* Peripheral clock disable */
|
||||
__HAL_RCC_USART2_CLK_DISABLE();
|
||||
|
||||
/**USART2 GPIO Configuration
|
||||
PA2 ------> USART2_TX
|
||||
PA3 ------> USART2_RX
|
||||
*/
|
||||
HAL_GPIO_DeInit(GPIOA, GPIO_PIN_2|GPIO_PIN_3);
|
||||
|
||||
/* USART2 interrupt DeInit */
|
||||
HAL_NVIC_DisableIRQ(USART2_IRQn);
|
||||
/* USER CODE BEGIN USART2_MspDeInit 1 */
|
||||
|
||||
/* USER CODE END USART2_MspDeInit 1 */
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
static uint32_t FMC_Initialized = 0;
|
||||
|
||||
static void HAL_FMC_MspInit(void){
|
||||
|
||||
@@ -55,7 +55,9 @@
|
||||
/* USER CODE END 0 */
|
||||
|
||||
/* External variables --------------------------------------------------------*/
|
||||
|
||||
extern SD_HandleTypeDef hsd1;
|
||||
extern UART_HandleTypeDef huart1;
|
||||
extern UART_HandleTypeDef huart2;
|
||||
/* USER CODE BEGIN EV */
|
||||
|
||||
/* USER CODE END EV */
|
||||
@@ -198,6 +200,48 @@ void SysTick_Handler(void)
|
||||
/* please refer to the startup file (startup_stm32h7xx.s). */
|
||||
/******************************************************************************/
|
||||
|
||||
/**
|
||||
* @brief This function handles USART1 global interrupt.
|
||||
*/
|
||||
void USART1_IRQHandler(void)
|
||||
{
|
||||
/* USER CODE BEGIN USART1_IRQn 0 */
|
||||
|
||||
/* USER CODE END USART1_IRQn 0 */
|
||||
HAL_UART_IRQHandler(&huart1);
|
||||
/* USER CODE BEGIN USART1_IRQn 1 */
|
||||
|
||||
/* USER CODE END USART1_IRQn 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles USART2 global interrupt.
|
||||
*/
|
||||
void USART2_IRQHandler(void)
|
||||
{
|
||||
/* USER CODE BEGIN USART2_IRQn 0 */
|
||||
|
||||
/* USER CODE END USART2_IRQn 0 */
|
||||
HAL_UART_IRQHandler(&huart2);
|
||||
/* USER CODE BEGIN USART2_IRQn 1 */
|
||||
|
||||
/* USER CODE END USART2_IRQn 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles SDMMC1 global interrupt.
|
||||
*/
|
||||
void SDMMC1_IRQHandler(void)
|
||||
{
|
||||
/* USER CODE BEGIN SDMMC1_IRQn 0 */
|
||||
|
||||
/* USER CODE END SDMMC1_IRQn 0 */
|
||||
HAL_SD_IRQHandler(&hsd1);
|
||||
/* USER CODE BEGIN SDMMC1_IRQn 1 */
|
||||
|
||||
/* USER CODE END SDMMC1_IRQn 1 */
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN 1 */
|
||||
|
||||
/* USER CODE END 1 */
|
||||
Reference in new issue
Block a user