sc
/
828eco
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
828eco基于GD32H7mcu
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
1 Commit
1 Branch
0 Tags
12 MiB
Branch: master
Branches Tags
${ item.name }
Create tag ${ searchTerm }
Create branch ${ searchTerm }
from 'master'
${ noResults }
828eco/828ECO/libraries/GD32H75E_standard_peripheral/Source/gd32h75e_rameccmu.c

514 lines
23 KiB
Raw Permalink Normal View History

创建
5 months ago
/*!
\file gd32h75e_rameccmu.c
\brief RAMECCMU driver
\version 2025-08-07, V1.2.0, firmware for GD32H75E
*/
/*
Copyright (c) 2025, GigaDevice Semiconductor Inc.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this
list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice,
this list of conditions and the following disclaimer in the documentation
and/or other materials provided with the distribution.
3. Neither the name of the copyright holder nor the names of its contributors
may be used to endorse or promote products derived from this software without
specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
OF SUCH DAMAGE.
*/
#include "gd32h75e_rameccmu.h"
#define RAMECCMU_REG_RESET_VALUE 0x00000000U
/*!
\brief deinit RAMECCMU unit
\param[in] rameccmu_periph: RAMECCMUx(x=0,1)
\param[out] none
\retval none
*/
void rameccmu_deinit(uint32_t rameccmu_periph)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_RAMECCMU_PERIPH(rameccmu_periph)) {
fw_debug_report_err(RAMECCMU_MODULE_ID, API_ID(0), ERR_PARAM_INVALID);
} else
#endif /* FW_DEBUG_ERR_REPORT */
{
RAMECCMU_INT(rameccmu_periph) = RAMECCMU_REG_RESET_VALUE;
if(RAMECCMU0 == rameccmu_periph){
/* reset RAMECCMU0_MONITOR0 registers */
RAMECCMU_MXCTL(RAMECCMU0_MONITOR0) = RAMECCMU_REG_RESET_VALUE;
RAMECCMU_MXSTAT(RAMECCMU0_MONITOR0) = RAMECCMU_REG_RESET_VALUE;
RAMECCMU_MXFADDR(RAMECCMU0_MONITOR0) = RAMECCMU_REG_RESET_VALUE;
RAMECCMU_MXFDL(RAMECCMU0_MONITOR0) = RAMECCMU_REG_RESET_VALUE;
RAMECCMU_MXFDH(RAMECCMU0_MONITOR0) = RAMECCMU_REG_RESET_VALUE;
RAMECCMU_MXFECODE(RAMECCMU0_MONITOR0) = RAMECCMU_REG_RESET_VALUE;
/* reset RAMECCMU0_MONITOR1 registers */
RAMECCMU_MXCTL(RAMECCMU0_MONITOR1) = RAMECCMU_REG_RESET_VALUE;
RAMECCMU_MXSTAT(RAMECCMU0_MONITOR1) = RAMECCMU_REG_RESET_VALUE;
RAMECCMU_MXFADDR(RAMECCMU0_MONITOR1) = RAMECCMU_REG_RESET_VALUE;
RAMECCMU_MXFDL(RAMECCMU0_MONITOR1) = RAMECCMU_REG_RESET_VALUE;
RAMECCMU_MXFDH(RAMECCMU0_MONITOR1) = RAMECCMU_REG_RESET_VALUE;
RAMECCMU_MXFECODE(RAMECCMU0_MONITOR1) = RAMECCMU_REG_RESET_VALUE;
/* reset RAMECCMU0_MONITOR2 registers */
RAMECCMU_MXCTL(RAMECCMU0_MONITOR2) = RAMECCMU_REG_RESET_VALUE;
RAMECCMU_MXSTAT(RAMECCMU0_MONITOR2) = RAMECCMU_REG_RESET_VALUE;
RAMECCMU_MXFADDR(RAMECCMU0_MONITOR2) = RAMECCMU_REG_RESET_VALUE;
RAMECCMU_MXFDL(RAMECCMU0_MONITOR2) = RAMECCMU_REG_RESET_VALUE;
RAMECCMU_MXFDH(RAMECCMU0_MONITOR2) = RAMECCMU_REG_RESET_VALUE;
RAMECCMU_MXFECODE(RAMECCMU0_MONITOR2) = RAMECCMU_REG_RESET_VALUE;
/* reset RAMECCMU0_MONITOR3 registers */
RAMECCMU_MXCTL(RAMECCMU0_MONITOR3) = RAMECCMU_REG_RESET_VALUE;
RAMECCMU_MXSTAT(RAMECCMU0_MONITOR3) = RAMECCMU_REG_RESET_VALUE;
RAMECCMU_MXFADDR(RAMECCMU0_MONITOR3) = RAMECCMU_REG_RESET_VALUE;
RAMECCMU_MXFDL(RAMECCMU0_MONITOR3) = RAMECCMU_REG_RESET_VALUE;
RAMECCMU_MXFDH(RAMECCMU0_MONITOR3) = RAMECCMU_REG_RESET_VALUE;
RAMECCMU_MXFECODE(RAMECCMU0_MONITOR3) = RAMECCMU_REG_RESET_VALUE;
/* reset RAMECCMU0_MONITOR4 registers */
RAMECCMU_MXCTL(RAMECCMU0_MONITOR4) = RAMECCMU_REG_RESET_VALUE;
RAMECCMU_MXSTAT(RAMECCMU0_MONITOR4) = RAMECCMU_REG_RESET_VALUE;
RAMECCMU_MXFADDR(RAMECCMU0_MONITOR4) = RAMECCMU_REG_RESET_VALUE;
RAMECCMU_MXFDL(RAMECCMU0_MONITOR4) = RAMECCMU_REG_RESET_VALUE;
RAMECCMU_MXFDH(RAMECCMU0_MONITOR4) = RAMECCMU_REG_RESET_VALUE;
RAMECCMU_MXFECODE(RAMECCMU0_MONITOR4) = RAMECCMU_REG_RESET_VALUE;
}else{
/* reset RAMECCMU1_MONITOR0 registers */
RAMECCMU_MXCTL(RAMECCMU1_MONITOR0) = RAMECCMU_REG_RESET_VALUE;
RAMECCMU_MXSTAT(RAMECCMU1_MONITOR0) = RAMECCMU_REG_RESET_VALUE;
RAMECCMU_MXFADDR(RAMECCMU1_MONITOR0) = RAMECCMU_REG_RESET_VALUE;
RAMECCMU_MXFDL(RAMECCMU1_MONITOR0) = RAMECCMU_REG_RESET_VALUE;
RAMECCMU_MXFDH(RAMECCMU1_MONITOR0) = RAMECCMU_REG_RESET_VALUE;
RAMECCMU_MXFECODE(RAMECCMU1_MONITOR0) = RAMECCMU_REG_RESET_VALUE;
/* reset RAMECCMU1_MONITOR1 registers */
RAMECCMU_MXCTL(RAMECCMU1_MONITOR1) = RAMECCMU_REG_RESET_VALUE;
RAMECCMU_MXSTAT(RAMECCMU1_MONITOR1) = RAMECCMU_REG_RESET_VALUE;
RAMECCMU_MXFADDR(RAMECCMU1_MONITOR1) = RAMECCMU_REG_RESET_VALUE;
RAMECCMU_MXFDL(RAMECCMU1_MONITOR1) = RAMECCMU_REG_RESET_VALUE;
RAMECCMU_MXFDH(RAMECCMU1_MONITOR1) = RAMECCMU_REG_RESET_VALUE;
RAMECCMU_MXFECODE(RAMECCMU1_MONITOR1) = RAMECCMU_REG_RESET_VALUE;
/* reset RAMECCMU1_MONITOR2 registers */
RAMECCMU_MXCTL(RAMECCMU1_MONITOR2) = RAMECCMU_REG_RESET_VALUE;
RAMECCMU_MXSTAT(RAMECCMU1_MONITOR2) = RAMECCMU_REG_RESET_VALUE;
RAMECCMU_MXFADDR(RAMECCMU1_MONITOR2) = RAMECCMU_REG_RESET_VALUE;
RAMECCMU_MXFDL(RAMECCMU1_MONITOR2) = RAMECCMU_REG_RESET_VALUE;
RAMECCMU_MXFDH(RAMECCMU1_MONITOR2) = RAMECCMU_REG_RESET_VALUE;
RAMECCMU_MXFECODE(RAMECCMU1_MONITOR2) = RAMECCMU_REG_RESET_VALUE;
}
}
}
/*!
\brief get RAMECCMU monitor ECC failing address
\param[in] rameccmu_monitor: RAMECCMU monitor
only one parameter can be selected which is shown as below:
\arg RAMECCMU0_MONITOR0: RAMECCMU0 monitor 0
\arg RAMECCMU0_MONITOR1: RAMECCMU0 monitor 1
\arg RAMECCMU0_MONITOR2: RAMECCMU0 monitor 2
\arg RAMECCMU0_MONITOR3: RAMECCMU0 monitor 3
\arg RAMECCMU0_MONITOR4: RAMECCMU0 monitor 4
\arg RAMECCMU1_MONITOR0: RAMECCMU1 monitor 0
\arg RAMECCMU1_MONITOR1: RAMECCMU1 monitor 1
\arg RAMECCMU1_MONITOR2: RAMECCMU1 monitor 2
\param[out] none
\retval ECC error failing address
*/
uint32_t rameccmu_monitor_failing_address_get(rameccmu_monitor_enum rameccmu_monitor)
{
uint32_t temp_mxfaddr = 0U;
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_RAMECCMU_MONITOR(rameccmu_monitor)) {
fw_debug_report_err(RAMECCMU_MODULE_ID, API_ID(1), ERR_PARAM_INVALID);
} else
#endif /* FW_DEBUG_ERR_REPORT */
{
temp_mxfaddr = RAMECCMU_MXFADDR(rameccmu_monitor);
}
return temp_mxfaddr;
}
/*!
\brief get RAMECCMU monitor ECC failing data low 32 bits
\param[in] rameccmu_monitor: RAMECCMU monitor
only one parameter can be selected which is shown as below:
\arg RAMECCMU0_MONITOR0: RAMECCMU0 monitor 0
\arg RAMECCMU0_MONITOR1: RAMECCMU0 monitor 1
\arg RAMECCMU0_MONITOR2: RAMECCMU0 monitor 2
\arg RAMECCMU0_MONITOR3: RAMECCMU0 monitor 3
\arg RAMECCMU0_MONITOR4: RAMECCMU0 monitor 4
\arg RAMECCMU1_MONITOR0: RAMECCMU1 monitor 0
\arg RAMECCMU1_MONITOR1: RAMECCMU1 monitor 1
\arg RAMECCMU1_MONITOR2: RAMECCMU1 monitor 2
\param[out] none
\retval ECC failing data low 32 bits
*/
uint32_t rameccmu_monitor_failing_data_low_bits_get(rameccmu_monitor_enum rameccmu_monitor)
{
uint32_t temp_mxfdl = 0U;
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_RAMECCMU_MONITOR(rameccmu_monitor)) {
fw_debug_report_err(RAMECCMU_MODULE_ID, API_ID(2), ERR_PARAM_INVALID);
} else
#endif /* FW_DEBUG_ERR_REPORT */
{
temp_mxfdl = RAMECCMU_MXFDL(rameccmu_monitor);
}
return temp_mxfdl;
}
/*!
\brief get RAMECCMU monitor ECC failing data high 32 bits
\param[in] rameccmu_monitor: RAMECCMU monitor
only one parameter can be selected which is shown as below:
\arg RAMECCMU0_MONITOR0: RAMECCMU0 monitor 0
\arg RAMECCMU0_MONITOR1: RAMECCMU0 monitor 1
\arg RAMECCMU0_MONITOR2: RAMECCMU0 monitor 2
\arg RAMECCMU0_MONITOR3: RAMECCMU0 monitor 3
\arg RAMECCMU0_MONITOR4: RAMECCMU0 monitor 4
\arg RAMECCMU1_MONITOR0: RAMECCMU1 monitor 0
\arg RAMECCMU1_MONITOR1: RAMECCMU1 monitor 1
\arg RAMECCMU1_MONITOR2: RAMECCMU1 monitor 2
\param[out] none
\retval ECC failing data high 32 bits
*/
uint32_t rameccmu_monitor_failing_data_high_bits_get(rameccmu_monitor_enum rameccmu_monitor)
{
uint32_t temp_mxfdh = 0U;
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_RAMECCMU_MONITOR(rameccmu_monitor)) {
fw_debug_report_err(RAMECCMU_MODULE_ID, API_ID(3), ERR_PARAM_INVALID);
} else
#endif /* FW_DEBUG_ERR_REPORT */
{
temp_mxfdh = RAMECCMU_MXFDH(rameccmu_monitor);
}
return temp_mxfdh;
}
/*!
\brief get RAMECCMU monitor failing ECC error code
\param[in] rameccmu_monitor: RAMECCMU monitor
only one parameter can be selected which is shown as below:
\arg RAMECCMU0_MONITOR0: RAMECCMU0 monitor 0
\arg RAMECCMU0_MONITOR1: RAMECCMU0 monitor 1
\arg RAMECCMU0_MONITOR2: RAMECCMU0 monitor 2
\arg RAMECCMU0_MONITOR3: RAMECCMU0 monitor 3
\arg RAMECCMU0_MONITOR4: RAMECCMU0 monitor 4
\arg RAMECCMU1_MONITOR0: RAMECCMU1 monitor 0
\arg RAMECCMU1_MONITOR1: RAMECCMU1 monitor 1
\arg RAMECCMU1_MONITOR2: RAMECCMU1 monitor 2
\param[out] none
\retval ECC failing error code
*/
uint32_t rameccmu_monitor_failing_ecc_error_code_get(rameccmu_monitor_enum rameccmu_monitor)
{
uint32_t temp_mxfecode = 0U;
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_RAMECCMU_MONITOR(rameccmu_monitor)) {
fw_debug_report_err(RAMECCMU_MODULE_ID, API_ID(4), ERR_PARAM_INVALID);
} else
#endif /* FW_DEBUG_ERR_REPORT */
{
temp_mxfecode = RAMECCMU_MXFECODE(rameccmu_monitor);
}
return temp_mxfecode;
}
/*!
\brief enable RAMECCMU global ECC interruput
\param[in] rameccmu_periph: RAMECCMU
only one parameter can be selected which is shown as below:
\arg RAMECCMU0: RAMECCMU for region 0
\arg RAMECCMU1: RAMECCMU for region 1
\param[in] interrupt: global ECC interruput
one or more parameters can be selected which are shown as below:
\arg RAMECCMU_INT_ECC_GLOBAL_ERROR: ECC global error interrupt
\arg RAMECCMU_INT_ECC_SINGLE_ERROR: ECC single error interrupt
\arg RAMECCMU_INT_ECC_DOUBLE_ERROR: ECC double error interrupt
\arg RAMECCMU_INT_ECC_DOUBLE_ERROR_BYTE_WRITE: ECC double error on byte write interrupt
\param[out] none
\retval none
*/
void rameccmu_global_interrupt_enable(uint32_t rameccmu_periph, uint32_t interrupt)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_RAMECCMU_PERIPH(rameccmu_periph)) {
fw_debug_report_err(RAMECCMU_MODULE_ID, API_ID(5), ERR_PARAM_INVALID);
} else if(NOT_RAMECCMU_INT_ERROR(interrupt)) {
fw_debug_report_err(RAMECCMU_MODULE_ID, API_ID(5), ERR_PARAM_INVALID);
} else
#endif /* FW_DEBUG_ERR_REPORT */
{
RAMECCMU_INT(rameccmu_periph) |= interrupt;
}
}
/*!
\brief disable RAMECCMU global ECC interruput
\param[in] rameccmu_periph: RAMECCMU
only one parameter can be selected which is shown as below:
\arg RAMECCMU0: RAMECCMU for region 0
\arg RAMECCMU1: RAMECCMU for region 1
\param[in] interrupt: global ECC interruput
one or more parameters can be selected which are shown as below:
\arg RAMECCMU_INT_ECC_GLOBAL_ERROR: ECC global error interrupt
\arg RAMECCMU_INT_ECC_SINGLE_ERROR: ECC single error interrupt
\arg RAMECCMU_INT_ECC_DOUBLE_ERROR: ECC double error interrupt
\arg RAMECCMU_INT_ECC_DOUBLE_ERROR_BYTE_WRITE: ECC double error on byte write interrupt
\param[out] none
\retval none
*/
void rameccmu_global_interrupt_disable(uint32_t rameccmu_periph, uint32_t interrupt)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_RAMECCMU_PERIPH(rameccmu_periph)) {
fw_debug_report_err(RAMECCMU_MODULE_ID, API_ID(6), ERR_PARAM_INVALID);
} else if(NOT_RAMECCMU_INT_ERROR(interrupt)) {
fw_debug_report_err(RAMECCMU_MODULE_ID, API_ID(6), ERR_PARAM_INVALID);
} else
#endif /* FW_DEBUG_ERR_REPORT */
{
RAMECCMU_INT(rameccmu_periph) &= (uint32_t)(~interrupt);
}
}
/*!
\brief enable RAMECCMU monitor ECC error interruput
\param[in] rameccmu_monitor: RAMECCMU monitor
only one parameter can be selected which is shown as below:
\arg RAMECCMU0_MONITOR0: RAMECCMU0 monitor 0
\arg RAMECCMU0_MONITOR1: RAMECCMU0 monitor 1
\arg RAMECCMU0_MONITOR2: RAMECCMU0 monitor 2
\arg RAMECCMU0_MONITOR3: RAMECCMU0 monitor 3
\arg RAMECCMU0_MONITOR4: RAMECCMU0 monitor 4
\arg RAMECCMU1_MONITOR0: RAMECCMU1 monitor 0
\arg RAMECCMU1_MONITOR1: RAMECCMU1 monitor 1
\arg RAMECCMU1_MONITOR2: RAMECCMU1 monitor 2
\param[in] monitor_interrupt: RAMECCMU monitor interruput
one or more parameters can be selected which are shown as below:
\arg RAMECCMU_INT_ECC_SINGLE_ERROR: ECC single error interrupt
\arg RAMECCMU_INT_ECC_DOUBLE_ERROR: ECC double error interrupt
\arg RAMECCMU_INT_ECC_DOUBLE_ERROR_BYTE_WRITE: ECC double error on byte write interrupt
\arg RAMECCMU_INT_ECC_ERROR_LATCHING: ECC error latching
\param[out] none
\retval none
*/
void rameccmu_monitor_interrupt_enable(rameccmu_monitor_enum rameccmu_monitor, uint32_t monitor_interrupt)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_RAMECCMU_MONITOR(rameccmu_monitor)) {
fw_debug_report_err(RAMECCMU_MODULE_ID, API_ID(7), ERR_PARAM_INVALID);
} else if(NOT_RAMECCMU_MONITOR_INT_ERROR(monitor_interrupt)) {
fw_debug_report_err(RAMECCMU_MODULE_ID, API_ID(7), ERR_PARAM_INVALID);
} else
#endif /* FW_DEBUG_ERR_REPORT */
{
RAMECCMU_MXCTL(rameccmu_monitor) |= (uint32_t)monitor_interrupt << 1U;
}
}
/*!
\brief disable RAMECCMU monitor ECC error interruput
\param[in] rameccmu_monitor: RAMECCMU monitor
only one parameter can be selected which is shown as below:
\arg RAMECCMU0_MONITOR0: RAMECCMU0 monitor 0
\arg RAMECCMU0_MONITOR1: RAMECCMU0 monitor 1
\arg RAMECCMU0_MONITOR2: RAMECCMU0 monitor 2
\arg RAMECCMU0_MONITOR3: RAMECCMU0 monitor 3
\arg RAMECCMU0_MONITOR4: RAMECCMU0 monitor 4
\arg RAMECCMU1_MONITOR0: RAMECCMU1 monitor 0
\arg RAMECCMU1_MONITOR1: RAMECCMU1 monitor 1
\arg RAMECCMU1_MONITOR2: RAMECCMU1 monitor 2
\param[in] monitor_interrupt: RAMECCMU monitor interruput
one or more parameters can be selected which are shown as below:
\arg RAMECCMU_INT_ECC_SINGLE_ERROR: ECC single error interrupt
\arg RAMECCMU_INT_ECC_DOUBLE_ERROR: ECC double error interrupt
\arg RAMECCMU_INT_ECC_DOUBLE_ERROR_BYTE_WRITE: ECC double error on byte write interrupt
\arg RAMECCMU_INT_ECC_ERROR_LATCHING: ECC error latching
\param[out] none
\retval none
*/
void rameccmu_monitor_interrupt_disable(rameccmu_monitor_enum rameccmu_monitor, uint32_t monitor_interrupt)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_RAMECCMU_MONITOR(rameccmu_monitor)) {
fw_debug_report_err(RAMECCMU_MODULE_ID, API_ID(8), ERR_PARAM_INVALID);
} else if(NOT_RAMECCMU_MONITOR_INT_ERROR(monitor_interrupt)) {
fw_debug_report_err(RAMECCMU_MODULE_ID, API_ID(8), ERR_PARAM_INVALID);
} else
#endif /* FW_DEBUG_ERR_REPORT */
{
RAMECCMU_MXCTL(rameccmu_monitor) &= (uint32_t)~((uint32_t)monitor_interrupt << 1U);
}
}
/*!
\brief get RAMECCMU monitor ECC error flag
\param[in] rameccmu_monitor: RAMECCMU monitor
only one parameter can be selected which is shown as below:
\arg RAMECCMU0_MONITOR0: RAMECCMU0 monitor 0
\arg RAMECCMU0_MONITOR1: RAMECCMU0 monitor 1
\arg RAMECCMU0_MONITOR2: RAMECCMU0 monitor 2
\arg RAMECCMU0_MONITOR3: RAMECCMU0 monitor 3
\arg RAMECCMU0_MONITOR4: RAMECCMU0 monitor 4
\arg RAMECCMU1_MONITOR0: RAMECCMU1 monitor 0
\arg RAMECCMU1_MONITOR1: RAMECCMU1 monitor 1
\arg RAMECCMU1_MONITOR2: RAMECCMU1 monitor 2
\param[in] flag: RAMECCMU monitor flag
one or more parameters can be selected which are shown as below:
\arg RAMECCMU_FLAG_ECC_SINGLE_ERROR: ECC single error detected and corrected flag
\arg RAMECCMU_FLAG_ECC_DOUBLE_ERROR: ECC double error detected flag
\arg RAMECCMU_FLAG_ECC_DOUBLE_ERROR_BYTE_WRITE: ECC double error on byte write detected flag
\param[out] none
\retval RESET or SET
*/
FlagStatus rameccmu_monitor_flag_get(rameccmu_monitor_enum rameccmu_monitor, uint32_t flag)
{
FlagStatus temp_flag = RESET;
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_RAMECCMU_MONITOR(rameccmu_monitor)) {
fw_debug_report_err(RAMECCMU_MODULE_ID, API_ID(9), ERR_PARAM_INVALID);
} else if(NOT_RAMECCMU_FLAG_ECC_ERROR(flag)) {
fw_debug_report_err(RAMECCMU_MODULE_ID, API_ID(9), ERR_PARAM_INVALID);
} else
#endif /* FW_DEBUG_ERR_REPORT */
{
if(RESET != ((RAMECCMU_MXSTAT(rameccmu_monitor)) & flag)){
temp_flag = SET;
} else {
temp_flag = RESET;
}
}
return temp_flag;
}
/*!
\brief clear RAMECCMU monitor ECC error flag
\param[in] rameccmu_monitor: RAMECCMU monitor
only one parameter can be selected which is shown as below:
\arg RAMECCMU0_MONITOR0: RAMECCMU0 monitor 0
\arg RAMECCMU0_MONITOR1: RAMECCMU0 monitor 1
\arg RAMECCMU0_MONITOR2: RAMECCMU0 monitor 2
\arg RAMECCMU0_MONITOR3: RAMECCMU0 monitor 3
\arg RAMECCMU0_MONITOR4: RAMECCMU0 monitor 4
\arg RAMECCMU1_MONITOR0: RAMECCMU1 monitor 0
\arg RAMECCMU1_MONITOR1: RAMECCMU1 monitor 1
\arg RAMECCMU1_MONITOR2: RAMECCMU1 monitor 2
\param[in] flag: RAMECCMU monitor flag
one or more parameters can be selected which are shown as below:
\arg RAMECCMU_FLAG_ECC_SINGLE_ERROR: ECC single error detected and corrected flag
\arg RAMECCMU_FLAG_ECC_DOUBLE_ERROR: ECC double error detected flag
\arg RAMECCMU_FLAG_ECC_DOUBLE_ERROR_BYTE_WRITE: ECC double error on byte write detected flag
\param[out] none
\retval none
*/
void rameccmu_monitor_flag_clear(rameccmu_monitor_enum rameccmu_monitor, uint32_t flag)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_RAMECCMU_MONITOR(rameccmu_monitor)) {
fw_debug_report_err(RAMECCMU_MODULE_ID, API_ID(10), ERR_PARAM_INVALID);
} else if(NOT_RAMECCMU_FLAG_ECC_ERROR(flag)) {
fw_debug_report_err(RAMECCMU_MODULE_ID, API_ID(10), ERR_PARAM_INVALID);
} else
#endif /* FW_DEBUG_ERR_REPORT */
{
RAMECCMU_MXSTAT(rameccmu_monitor) &= (uint32_t)(~flag);
}
}
/*!
\brief get RAMECCMU monitor ECC interrupt error flag
\param[in] rameccmu_monitor: RAMECCMU monitor
only one parameter can be selected which is shown as below:
\arg RAMECCMU0_MONITOR0: RAMECCMU0 monitor 0
\arg RAMECCMU0_MONITOR1: RAMECCMU0 monitor 1
\arg RAMECCMU0_MONITOR2: RAMECCMU0 monitor 2
\arg RAMECCMU0_MONITOR3: RAMECCMU0 monitor 3
\arg RAMECCMU0_MONITOR4: RAMECCMU0 monitor 4
\arg RAMECCMU1_MONITOR0: RAMECCMU1 monitor 0
\arg RAMECCMU1_MONITOR1: RAMECCMU1 monitor 1
\arg RAMECCMU1_MONITOR2: RAMECCMU1 monitor 2
\param[in] int_flag: RAMECCMU monitor flag
one or more parameters can be selected which are shown as below:
\arg RAMECCMU_INT_FLAG_ECC_SINGLE_ERROR: ECC single error detected and corrected flag
\arg RAMECCMU_INT_FLAG_ECC_DOUBLE_ERROR: ECC double error detected flag
\arg RAMECCMU_INT_FLAG_ECC_DOUBLE_ERROR_BYTE_WRITE: ECC double error on byte write detected flag
\param[out] none
\retval none
*/
FlagStatus rameccmu_monitor_interrupt_flag_get(rameccmu_monitor_enum rameccmu_monitor, uint32_t int_flag)
{
uint32_t ret1 = RESET;
uint32_t ret2 = RESET;
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_RAMECCMU_MONITOR(rameccmu_monitor)) {
fw_debug_report_err(RAMECCMU_MODULE_ID, API_ID(11), ERR_PARAM_INVALID);
} else if(NOT_RAMECCMU_INT_FLAG_ECC_ERROR(int_flag)) {
fw_debug_report_err(RAMECCMU_MODULE_ID, API_ID(11), ERR_PARAM_INVALID);
} else
#endif /* FW_DEBUG_ERR_REPORT */
{
/* get the status of interrupt enable bit */
ret1 = RAMECCMU_MXCTL(rameccmu_monitor) & (uint32_t)(int_flag << 2U);
/* get the status of interrupt flag */
ret2 = RAMECCMU_MXSTAT(rameccmu_monitor) & int_flag;
if(ret1 && ret2) {
ret1 = SET;
} else {
ret1 = RESET;
}
}
return (FlagStatus)ret1;
}
/*!
\brief clear RAMECCMU monitor interrupt ECC error flag
\param[in] rameccmu_monitor: RAMECCMU monitor
only one parameter can be selected which is shown as below:
\arg RAMECCMU0_MONITOR0: RAMECCMU0 monitor 0
\arg RAMECCMU0_MONITOR1: RAMECCMU0 monitor 1
\arg RAMECCMU0_MONITOR2: RAMECCMU0 monitor 2
\arg RAMECCMU0_MONITOR3: RAMECCMU0 monitor 3
\arg RAMECCMU0_MONITOR4: RAMECCMU0 monitor 4
\arg RAMECCMU1_MONITOR0: RAMECCMU1 monitor 0
\arg RAMECCMU1_MONITOR1: RAMECCMU1 monitor 1
\arg RAMECCMU1_MONITOR2: RAMECCMU1 monitor 2
\param[in] int_flag: RAMECCMU monitor flag
one or more parameters can be selected which are shown as below:
\arg RAMECCMU_INT_FLAG_ECC_SINGLE_ERROR: ECC single error detected and corrected flag
\arg RAMECCMU_INT_FLAG_ECC_DOUBLE_ERROR: ECC double error detected flag
\arg RAMECCMU_INT_FLAG_ECC_DOUBLE_ERROR_BYTE_WRITE: ECC double error on byte write detected flag
\param[out] none
\retval none
*/
void rameccmu_monitor_interrupt_flag_clear(rameccmu_monitor_enum rameccmu_monitor, uint32_t int_flag)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_RAMECCMU_MONITOR(rameccmu_monitor)) {
fw_debug_report_err(RAMECCMU_MODULE_ID, API_ID(12), ERR_PARAM_INVALID);
} else if(NOT_RAMECCMU_INT_FLAG_ECC_ERROR(int_flag)) {
fw_debug_report_err(RAMECCMU_MODULE_ID, API_ID(12), ERR_PARAM_INVALID);
} else
#endif /* FW_DEBUG_ERR_REPORT */
{
RAMECCMU_MXSTAT(rameccmu_monitor) &= (uint32_t)(~int_flag);
}
}