sc
/
828eco
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
828eco基于GD32H7mcu
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
1 Commit
1 Branch
0 Tags
12 MiB
Branch: master
Branches Tags
${ item.name }
Create tag ${ searchTerm }
Create branch ${ searchTerm }
from 'master'
${ noResults }
828eco/828ECO/libraries/GD32H75E_standard_peripheral/Source/gd32h75e_timer.c

4926 lines
221 KiB
Raw Permalink Normal View History

创建
5 months ago
/*!
\file gd32h75e_timer.c
\brief TIMER driver
\version 2025-08-07, V1.2.0, firmware for GD32H75E
*/
/*
Copyright (c) 2025, GigaDevice Semiconductor Inc.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this
list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice,
this list of conditions and the following disclaimer in the documentation
and/or other materials provided with the distribution.
3. Neither the name of the copyright holder nor the names of its contributors
may be used to endorse or promote products derived from this software without
specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
OF SUCH DAMAGE.
*/
#include "gd32h75e_timer.h"
/* TIMER init parameter mask */
#define ALIGNEDMODE_MASK ((uint32_t)0x00000060U) /*!< TIMER init parameter aligne dmode mask */
#define COUNTERDIRECTION_MASK ((uint32_t)0x00000010U) /*!< TIMER init parameter counter direction mask */
#define CLOCKDIVISION_MASK ((uint32_t)0x00000300U) /*!< TIMER init parameter clock division value mask */
#define TIMER_CNT_UPIFBU_MASK ((uint32_t)0x80000000U) /*!< the UPIFBU bit mask */
/*!
\brief deinit a TIMER
\param[in] timer_periph: TIMERx(x=0~7,14~16,22,23,40~44,50,51)
\param[out] none
\retval none
*/
void timer_deinit(uint32_t timer_periph)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0001U), ERR_PERIPH);
} else
#endif /* FW_DEBUG_ERR_REPORT */
{
switch(timer_periph) {
case TIMER0:
/* reset TIMER0 */
rcu_periph_reset_enable(RCU_TIMER0RST);
rcu_periph_reset_disable(RCU_TIMER0RST);
break;
case TIMER1:
/* reset TIMER1 */
rcu_periph_reset_enable(RCU_TIMER1RST);
rcu_periph_reset_disable(RCU_TIMER1RST);
break;
case TIMER2:
/* reset TIMER2 */
rcu_periph_reset_enable(RCU_TIMER2RST);
rcu_periph_reset_disable(RCU_TIMER2RST);
break;
case TIMER3:
/* reset TIMER3 */
rcu_periph_reset_enable(RCU_TIMER3RST);
rcu_periph_reset_disable(RCU_TIMER3RST);
break;
case TIMER4:
/* reset TIMER4 */
rcu_periph_reset_enable(RCU_TIMER4RST);
rcu_periph_reset_disable(RCU_TIMER4RST);
break;
case TIMER5:
/* reset TIMER5 */
rcu_periph_reset_enable(RCU_TIMER5RST);
rcu_periph_reset_disable(RCU_TIMER5RST);
break;
case TIMER6:
/* reset TIMER6 */
rcu_periph_reset_enable(RCU_TIMER6RST);
rcu_periph_reset_disable(RCU_TIMER6RST);
break;
case TIMER7:
/* reset TIMER7 */
rcu_periph_reset_enable(RCU_TIMER7RST);
rcu_periph_reset_disable(RCU_TIMER7RST);
break;
case TIMER14:
/* reset TIMER14 */
rcu_periph_reset_enable(RCU_TIMER14RST);
rcu_periph_reset_disable(RCU_TIMER14RST);
break;
case TIMER15:
/* reset TIMER15 */
rcu_periph_reset_enable(RCU_TIMER15RST);
rcu_periph_reset_disable(RCU_TIMER15RST);
break;
case TIMER16:
/* reset TIMER16 */
rcu_periph_reset_enable(RCU_TIMER16RST);
rcu_periph_reset_disable(RCU_TIMER16RST);
break;
case TIMER22:
/* reset TIMER22 */
rcu_periph_reset_enable(RCU_TIMER22RST);
rcu_periph_reset_disable(RCU_TIMER22RST);
break;
case TIMER23:
/* reset TIMER23 */
rcu_periph_reset_enable(RCU_TIMER23RST);
rcu_periph_reset_disable(RCU_TIMER23RST);
break;
case TIMER40:
/* reset TIMER40 */
rcu_periph_reset_enable(RCU_TIMER40RST);
rcu_periph_reset_disable(RCU_TIMER40RST);
break;
case TIMER41:
/* reset TIMER41 */
rcu_periph_reset_enable(RCU_TIMER41RST);
rcu_periph_reset_disable(RCU_TIMER41RST);
break;
case TIMER42:
/* reset TIMER42 */
rcu_periph_reset_enable(RCU_TIMER42RST);
rcu_periph_reset_disable(RCU_TIMER42RST);
break;
case TIMER43:
/* reset TIMER43 */
rcu_periph_reset_enable(RCU_TIMER43RST);
rcu_periph_reset_disable(RCU_TIMER43RST);
break;
case TIMER44:
/* reset TIMER44 */
rcu_periph_reset_enable(RCU_TIMER44RST);
rcu_periph_reset_disable(RCU_TIMER44RST);
break;
case TIMER50:
/* reset TIMER50 */
rcu_periph_reset_enable(RCU_TIMER50RST);
rcu_periph_reset_disable(RCU_TIMER50RST);
break;
case TIMER51:
/* reset TIMER51 */
rcu_periph_reset_enable(RCU_TIMER51RST);
rcu_periph_reset_disable(RCU_TIMER51RST);
break;
default:
break;
}
}
}
/*!
\brief initialize TIMER init parameter struct with a default value
\param[in] initpara: init parameter struct
\param[out] none
\retval none
*/
void timer_struct_para_init(timer_parameter_struct *initpara)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_VALID_POINTER(initpara)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0002U), ERR_PARAM_POINTER);
} else
#endif /* FW_DEBUG_ERR_REPORT */
{
/* initialize the init parameter struct member with the default value */
initpara->prescaler = 0U;
initpara->alignedmode = TIMER_COUNTER_EDGE;
initpara->counterdirection = TIMER_COUNTER_UP;
initpara->period = 0xFFFFFFFFFFFFFFFFU;
initpara->clockdivision = TIMER_CKDIV_DIV1;
initpara->repetitioncounter = 0U;
}
}
/*!
\brief initialize TIMER counter
\param[in] timer_periph: TIMERx(x=0~7,14~16,22,23,40~44,50,51)
\param[in] initpara: init parameter struct
prescaler: prescaler value of the counter clock, 0~65535
alignedmode: TIMER_COUNTER_EDGE, TIMER_COUNTER_CENTER_DOWN, TIMER_COUNTER_CENTER_UP, TIMER_COUNTER_CENTER_BOTH
counterdirection: TIMER_COUNTER_UP, TIMER_COUNTER_DOWN
period: counter auto reload value, 0~0xFFFF(TIMERx(x=0,7,14~16,40~44))
0~0xFFFFFFFF(TIMERx(x=1~6,22,23))
0~0xFFFFFFFFFFFFFFFF(TIMERx(x=50,51))
clockdivision: TIMER_CKDIV_DIV1, TIMER_CKDIV_DIV2, TIMER_CKDIV_DIV4(TIMERx(x=0~4,7,14~16,22,23,40~44))
repetitioncounter: counter repetition value, 0~0xFF, use TIMER_CREP0 register(TIMERx(x=0,7,14~16,40~44)
0xFF~0xFFFFFFFF, use TIMER_CREP1 register(TIMERx(x=0,7,14~16,40~44)
\param[out] none
\retval none
*/
void timer_init(uint32_t timer_periph, timer_parameter_struct *initpara)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0003U), ERR_PERIPH);
} else if(NOT_VALID_POINTER(initpara)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0003U), ERR_PARAM_POINTER);
} else
#endif /* FW_DEBUG_ERR_REPORT */
{
/* configure the counter prescaler value */
TIMER_PSC(timer_periph) = (uint16_t)initpara->prescaler;
/* configure the counter direction and aligned mode */
if((TIMER0 == timer_periph) || (TIMER7 == timer_periph) || (TIMER1 == timer_periph) || (TIMER2 == timer_periph) || \
(TIMER3 == timer_periph) || (TIMER4 == timer_periph) || (TIMER22 == timer_periph) || (TIMER23 == timer_periph)) {
TIMER_CTL0(timer_periph) &= (~(uint32_t)(TIMER_CTL0_DIR | TIMER_CTL0_CAM));
TIMER_CTL0(timer_periph) |= (uint32_t)(initpara->alignedmode & ALIGNEDMODE_MASK);
TIMER_CTL0(timer_periph) |= (uint32_t)(initpara->counterdirection & COUNTERDIRECTION_MASK);
}
/* configure the autoreload value */
if((TIMER50 == timer_periph) || (TIMER51 == timer_periph)) {
TIMER_CARL(timer_periph) = (uint32_t)initpara->period;
TIMER_CARH(timer_periph) = (uint32_t)(initpara->period >> 32U);
} else {
TIMER_CAR(timer_periph) = (uint32_t)initpara->period;
}
/* configure the clock division value */
if((TIMER5 != timer_periph) && (TIMER6 != timer_periph) && (TIMER50 != timer_periph) && (TIMER51 != timer_periph)) {
/* reset the CKDIV bit */
TIMER_CTL0(timer_periph) &= (~(uint32_t)TIMER_CTL0_CKDIV);
TIMER_CTL0(timer_periph) |= (uint32_t)(initpara->clockdivision & CLOCKDIVISION_MASK);
}
if((TIMER0 == timer_periph) || (TIMER7 == timer_periph) || (TIMER14 == timer_periph) || (TIMER15 == timer_periph) || \
(TIMER16 == timer_periph) || (TIMER40 == timer_periph) || (TIMER41 == timer_periph) || (TIMER42 == timer_periph) || \
(TIMER43 == timer_periph) || (TIMER44 == timer_periph)) {
/* configure the repetition counter value */
if(initpara->repetitioncounter <= 255U) {
TIMER_CFG(timer_periph) &= (~(uint32_t)TIMER_CFG_CREPSEL);
TIMER_CREP0(timer_periph) = (uint32_t)initpara->repetitioncounter;
} else {
TIMER_CFG(timer_periph) |= (uint32_t)TIMER_CFG_CREPSEL;
TIMER_CREP1(timer_periph) = (uint32_t)initpara->repetitioncounter;
}
}
/* generate an update event */
TIMER_SWEVG(timer_periph) |= (uint32_t)TIMER_SWEVG_UPG;
}
}
/*!
\brief enable a TIMER
\param[in] timer_periph: TIMERx(x=0~7,14~16,22,23,40~44,50,51)
\param[out] none
\retval none
*/
void timer_enable(uint32_t timer_periph)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0004U), ERR_PERIPH);
} else
#endif /* FW_DEBUG_ERR_REPORT */
{
TIMER_CTL0(timer_periph) |= (uint32_t)TIMER_CTL0_CEN;
}
}
/*!
\brief disable a TIMER
\param[in] timer_periph: TIMERx(x=0~7,14~16,22,23,40~44,50,51)
\param[out] none
\retval none
*/
void timer_disable(uint32_t timer_periph)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0005U), ERR_PERIPH);
} else
#endif /* FW_DEBUG_ERR_REPORT */
{
TIMER_CTL0(timer_periph) &= (~(uint32_t)TIMER_CTL0_CEN);
}
}
/*!
\brief enable the auto reload shadow function
\param[in] timer_periph: TIMERx(x=0~7,14~16,22,23,40~44,50,51)
\param[out] none
\retval none
*/
void timer_auto_reload_shadow_enable(uint32_t timer_periph)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0006U), ERR_PERIPH);
} else
#endif /* FW_DEBUG_ERR_REPORT */
{
TIMER_CTL0(timer_periph) |= (uint32_t)TIMER_CTL0_ARSE;
}
}
/*!
\brief disable the auto reload shadow function
\param[in] timer_periph: TIMERx(x=0~7,14~16,22,23,40~44,50,51)
\param[out] none
\retval none
*/
void timer_auto_reload_shadow_disable(uint32_t timer_periph)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0007U), ERR_PERIPH);
} else
#endif /* FW_DEBUG_ERR_REPORT */
{
TIMER_CTL0(timer_periph) &= (~(uint32_t)TIMER_CTL0_ARSE);
}
}
/*!
\brief enable the update event
\param[in] timer_periph: TIMERx(x=0~7,14~16,22,23,40~44,50,51)
\param[out] none
\retval none
*/
void timer_update_event_enable(uint32_t timer_periph)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0008U), ERR_PERIPH);
} else
#endif /* FW_DEBUG_ERR_REPORT */
{
TIMER_CTL0(timer_periph) &= (~(uint32_t)TIMER_CTL0_UPDIS);
}
}
/*!
\brief disable the update event
\param[in] timer_periph: TIMERx(x=0~7,14~16,22,23,40~44,50,51)
\param[out] none
\retval none
*/
void timer_update_event_disable(uint32_t timer_periph)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0009U), ERR_PERIPH);
} else
#endif /* FW_DEBUG_ERR_REPORT */
{
TIMER_CTL0(timer_periph) |= (uint32_t) TIMER_CTL0_UPDIS;
}
}
/*!
\brief set TIMER counter alignment mode
\param[in] timer_periph: TIMERx(x=0~4,7,22,23)
\param[in] aligned: center-aligned mode
only one parameter can be selected which is shown as below:
\arg TIMER_COUNTER_EDGE: edge-aligned mode
\arg TIMER_COUNTER_CENTER_DOWN: center-aligned and counting down assert mode
\arg TIMER_COUNTER_CENTER_UP: center-aligned and counting up assert mode
\arg TIMER_COUNTER_CENTER_BOTH: center-aligned and counting up/down assert mode
\param[out] none
\retval none
*/
void timer_counter_alignment(uint32_t timer_periph, uint16_t aligned)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x000AU), ERR_PERIPH);
} else if(NOT_TIMER_ALIGNED(aligned)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x000AU), ERR_PARAM_INVALID);
} else
#endif /* FW_DEBUG_ERR_REPORT */
{
TIMER_CTL0(timer_periph) &= (uint32_t)(~TIMER_CTL0_CAM);
TIMER_CTL0(timer_periph) |= (uint32_t)aligned;
}
}
/*!
\brief set TIMER counter up direction
\param[in] timer_periph: TIMERx(x=0~4,7,22,23)
\param[out] none
\retval none
*/
void timer_counter_up_direction(uint32_t timer_periph)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x000BU), ERR_PERIPH);
} else
#endif /* FW_DEBUG_ERR_REPORT */
{
TIMER_CTL0(timer_periph) &= (~(uint32_t)TIMER_CTL0_DIR);
}
}
/*!
\brief set TIMER counter down direction
\param[in] timer_periph: TIMERx(x=0~4,7,22,23)
\param[out] none
\retval none
*/
void timer_counter_down_direction(uint32_t timer_periph)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x000CU), ERR_PERIPH);
} else
#endif /* FW_DEBUG_ERR_REPORT */
{
TIMER_CTL0(timer_periph) |= (uint32_t)TIMER_CTL0_DIR;
}
}
/*!
\brief configure TIMER prescaler
\param[in] timer_periph: TIMERx(x=0~7,14~16,22,23,40~44,50,51)
\param[in] prescaler: prescaler value, 0~0xFFFF
\param[in] pscreload: prescaler reload mode
only one parameter can be selected which is shown as below:
\arg TIMER_PSC_RELOAD_NOW: the prescaler is loaded right now
\arg TIMER_PSC_RELOAD_UPDATE: the prescaler is loaded at the next update event
\param[out] none
\retval none
*/
void timer_prescaler_config(uint32_t timer_periph, uint16_t prescaler, uint32_t pscreload)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x000DU), ERR_PERIPH);
} else if(NOT_TIMER_PSCRELOAD(pscreload)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x000DU), ERR_PARAM_OUT_OF_RANGE);
} else
#endif /* FW_DEBUG_ERR_REPORT */
{
TIMER_PSC(timer_periph) = (uint32_t)prescaler;
if(TIMER_PSC_RELOAD_NOW == pscreload) {
TIMER_SWEVG(timer_periph) |= (uint32_t)TIMER_SWEVG_UPG;
}
}
}
/*!
\brief configure TIMER repetition register value
\param[in] timer_periph: TIMERx(x=0,7,14~16,40~44)
\param[in] ccsel: repetition register selection
only one parameter can be selected which is shown as below:
\arg TIMER_CREP0_ENABLE: The update event rate is depended to TIMERx_CREP0 register
\arg TIMER_CREP1_ENABLE: The update event rate is depended to TIMERx_CREP1 register
\param[in] repetition: the counter repetition value, 0~0xFF, use TIMER_CREP0 register,
0~0xFFFFFFFF, use TIMER_CREP1 register
\param[out] none
\retval none
*/
void timer_repetition_value_config(uint32_t timer_periph, uint16_t ccsel, uint32_t repetition)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x000EU), ERR_PERIPH);
} else if(NOT_TIMER_CREP_CCSEL(ccsel)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x000EU), ERR_PARAM_INVALID);
} else
#endif /* FW_DEBUG_ERR_REPORT */
{
if(TIMER_CREP0_ENABLE == ccsel) {
TIMER_CFG(timer_periph) &= (~(uint32_t)TIMER_CFG_CREPSEL);
TIMER_CREP0(timer_periph) = (uint32_t)repetition;
} else if(TIMER_CREP1_ENABLE == ccsel) {
TIMER_CFG(timer_periph) |= (uint32_t)TIMER_CFG_CREPSEL;
TIMER_CREP1(timer_periph) = (uint32_t)repetition;
} else {
/* illegal parameters */
}
}
}
/*!
\brief read TIMER runtime repetition register value
\param[in] timer_periph: TIMERx(x=0,7,14~16,40~44)
\param[out] none
\retval counter repetition value in TIMER_CREP1 register, 0~0xFFFFFFFF
*/
uint32_t timer_runtime_repetition_value_read(uint32_t timer_periph)
{
uint32_t repetition_value = 0U;
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x000FU), ERR_PERIPH);
} else
#endif /* FW_DEBUG_ERR_REPORT */
{
repetition_value = TIMER_CREP1(timer_periph);
}
return repetition_value;
}
/*!
\brief configure TIMER autoreload register value
\param[in] timer_periph: TIMERx(x=0~7,14~16,22,23,40~44,50,51)
\param[in] autoreload: the counter auto-reload value, 0~0xFFFF, TIMERx(x=0,2,3,7,14~16,40~44)
0~0xFFFFFFFF, TIMERx(x=1,4,5,6,22,23)
0~0xFFFFFFFFFFFFFFFF, TIMERx(x=50,51)
\param[out] none
\retval none
*/
void timer_autoreload_value_config(uint32_t timer_periph, uint64_t autoreload)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0010U), ERR_PERIPH);
} else
#endif /* FW_DEBUG_ERR_REPORT */
{
/* configure TIMER50/TIMER51 autoreload register value (64-bit) */
if((TIMER50 == timer_periph) || (TIMER51 == timer_periph)) {
TIMER_CARL(timer_periph) = (uint32_t)autoreload;
TIMER_CARH(timer_periph) = (uint32_t)(autoreload >> 32U);
} else {
/* configure other TIMER autoreload register value (32-bit or 16-bit) */
TIMER_CAR(timer_periph) = (uint32_t)autoreload;
}
}
}
/*!
\brief get TIMER autoreload register value
\param[in] timer_periph: TIMERx(x=0~7,14~16,22,23,40~44,50,51)
\param[out] none
\retval counter auto reload register value, 0~0xFFFF, TIMERx(x=0,2,3,7,14~16,40~44)
0~0xFFFFFFFF, TIMERx(x=1,4,5,6,22,23)
0~0xFFFFFFFFFFFFFFFF, TIMERx(x=50,51)
*/
uint64_t timer_autoreload_value_read(uint32_t timer_periph)
{
uint64_t autoreload = 0U;
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0011U), ERR_PERIPH);
} else
#endif /* FW_DEBUG_ERR_REPORT */
{
/* read TIMER50/TIMER51 autoreload register value (64-bit) */
if((TIMER50 == timer_periph) || (TIMER51 == timer_periph)) {
autoreload = (((uint64_t)TIMER_CARH(timer_periph)) << 32U);
autoreload |= TIMER_CARL(timer_periph);
} else {
/* read other TIMER autoreload register value (32-bit or 16-bit) */
autoreload = TIMER_CAR(timer_periph);
}
}
return autoreload;
}
/*!
\brief configure TIMER counter register value
\param[in] timer_periph: TIMERx(x=0~7,14~16,22,23,40~44,50,51)
\param[in] counter: the counter value, 0~0xFFFF, TIMERx(x=0,2,3,7,14~16,40~44)
0~0xFFFFFFFF, TIMERx(x=1,4,5,6,22,23)
0~0xFFFFFFFFFFFFFFFF, TIMERx(x=50,51)
\param[out] none
\retval none
*/
void timer_counter_value_config(uint32_t timer_periph, uint64_t counter)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0012U), ERR_PERIPH);
} else
#endif /* FW_DEBUG_ERR_REPORT */
{
/* configure TIMER50/TIMER51 counter value (64-bit) */
if((TIMER50 == timer_periph) || (TIMER51 == timer_periph)) {
TIMER_CNTL(timer_periph) = (uint32_t)counter;
TIMER_CNTH(timer_periph) = (uint32_t)(counter >> 32U);
if(TIMER_CTL0(timer_periph) & TIMER_CTL0_UPIFBUEN) {
TIMER_CNTH(timer_periph) &= (~TIMER_CNT_UPIFBU_MASK);
}
} else {
/* configure other TIMER counter value (32-bit or 16-bit) */
if(TIMER_CTL0(timer_periph) & TIMER_CTL0_UPIFBUEN) {
counter &= (~TIMER_CNT_UPIFBU_MASK);
}
TIMER_CNT(timer_periph) = (uint32_t)counter;
}
}
}
/*!
\brief read TIMER counter value
\param[in] timer_periph: TIMERx(x=0~7,14~16,22,23,40~44,50,51)
\param[out] none
\retval counter value: 0~0xFFFF, TIMERx(x=0,2,3,7,14~16,40~44)
0~0xFFFFFFFF, TIMERx(x=1,4,5,6,22,23)
0~0xFFFFFFFFFFFFFFFF, TIMERx(x=50,51)
*/
uint64_t timer_counter_read(uint32_t timer_periph)
{
uint64_t count_value = 0U;
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0013U), ERR_PERIPH);
} else
#endif /* FW_DEBUG_ERR_REPORT */
{
/* read TIMER50/TIMER51 counter value (64-bit) */
if((TIMER50 == timer_periph) || (TIMER51 == timer_periph)) {
count_value = (uint64_t)TIMER_CNTH(timer_periph);
if((TIMER_CTL0(timer_periph) & TIMER_CTL0_UPIFBUEN)) {
count_value &= (uint64_t)(~TIMER_CNT_UPIFBU_MASK);
}
count_value <<= 32U;
count_value |= (uint64_t)TIMER_CNTL(timer_periph);
} else {
/* read other TIMER counter value (32-bit or 16-bit) */
count_value = (uint64_t)TIMER_CNT(timer_periph);
if((TIMER_CTL0(timer_periph) & TIMER_CTL0_UPIFBUEN)) {
count_value &= (uint64_t)(~TIMER_CNT_UPIFBU_MASK);
}
}
}
return (count_value);
}
/*!
\brief read TIMER prescaler value
\param[in] timer_periph: TIMERx(x=0~7,14~16,22,23,40~44,50,51)
\param[out] none
\retval prescaler register value, 0~0xFFFF
*/
uint16_t timer_prescaler_read(uint32_t timer_periph)
{
uint16_t prescaler_value = 0U;
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0014U), ERR_PERIPH);
} else
#endif /* FW_DEBUG_ERR_REPORT */
{
prescaler_value = (uint16_t)(TIMER_PSC(timer_periph));
}
return (prescaler_value);
}
/*!
\brief configure TIMER single pulse mode
\param[in] timer_periph: TIMERx(x=0~7,14~16,22,23,40~44,50,51)
\param[in] spmode: single pulse mode
only one parameter can be selected which is shown as below:
\arg TIMER_SP_MODE_SINGLE: single pulse mode
\arg TIMER_SP_MODE_REPETITIVE: repetitive pulse mode
\param[out] none
\retval none
*/
void timer_single_pulse_mode_config(uint32_t timer_periph, uint32_t spmode)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0015U), ERR_PERIPH);
} else if(NOT_TIMER_SPMODE(spmode)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0015U), ERR_PARAM_INVALID);
} else
#endif /* FW_DEBUG_ERR_REPORT */
{
if(TIMER_SP_MODE_SINGLE == spmode) {
TIMER_CTL0(timer_periph) |= (uint32_t)TIMER_CTL0_SPM;
} else if(TIMER_SP_MODE_REPETITIVE == spmode) {
TIMER_CTL0(timer_periph) &= (~((uint32_t)TIMER_CTL0_SPM));
} else {
/* illegal parameters */
}
}
}
/*!
\brief configure timer delayable single pulse mode
\param[in] timer_periph: TIMERx(x=0~4,7,14,22,23,40~44)
\param[in] channel: TIMER channel
only one parameter can be selected which is shown as below:
\arg TIMER_CH_0: TIMER channel 0(TIMERx(x=0~4,7,14,22,23,40~44))
\arg TIMER_CH_1: TIMER channel 1(TIMERx(x=0~4,7,14,22,23,40~44))
\arg TIMER_CH_2: TIMER channel 2(TIMERx(x=0~4,7,22,23))
\arg TIMER_CH_3: TIMER channel 3(TIMERx(x=0~4,7,22,23))
\arg TIMER_MCH_0: TIMER multi mode channel 0(TIMERx(x=0,7,14,40~44))
\arg TIMER_MCH_1: TIMER multi mode channel 1(TIMERx(x=0,7))
\arg TIMER_MCH_2: TIMER multi mode channel 2(TIMERx(x=0,7))
\arg TIMER_MCH_3: TIMER multi mode channel 3(TIMERx(x=0,7))
\param[in] dspmode: delayable SPM mode
only one parameter can be selected which is shown as below:
\arg TIMER_OC_MODE_DSPM0: delayable SPM mode 0
\arg TIMER_OC_MODE_DSPM1: delayable SPM mode 1
\param[in] cnt_dir: counter direction selection
only one parameter can be selected which is shown as below:
TIMER_COUNTER_UP: count up
TIMER_COUNTER_DOWN: count down
\param[out] none
\retval none
*/
void timer_delayable_single_pulse_mode_config(uint32_t timer_periph, uint16_t channel, uint32_t dspmode, uint16_t cnt_dir)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0016U), ERR_PERIPH);
} else if(NOT_TIMER_ALL_CHANNEL(channel)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0016U), ERR_PARAM_INVALID);
} else if(NOT_TIMER_DSPMODE(dspmode)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0016U), ERR_PARAM_INVALID);
}else if(NOT_TIMER_CNT_DIR(cnt_dir)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0016U), ERR_PARAM_INVALID);
} else
#endif /* FW_DEBUG_ERR_REPORT */
{
/* timer run in single mode*/
timer_single_pulse_mode_config(timer_periph, TIMER_SP_MODE_SINGLE);
/* set the CHxCOMCTL/MCHxCOMCTL bits */
timer_channel_output_mode_config(timer_periph, channel, dspmode);
/* set the restart + event slave mode */
timer_slave_mode_select(timer_periph, TIMER_SLAVE_MODE_RESTART_EVENT);
/* set the counter direction in edge-aligned mode*/
TIMER_CTL0(timer_periph) &= (~(uint32_t)(TIMER_CTL0_DIR | TIMER_CTL0_CAM));
TIMER_CTL0(timer_periph) |= (uint32_t)(cnt_dir & COUNTERDIRECTION_MASK);
/* set the CHxCV/MCHxCV */
if(TIMER_COUNTER_UP == cnt_dir) {
switch(channel) {
/* configure TIMER_CH_0 */
case TIMER_CH_0:
TIMER_CH0CV(timer_periph) = 0U;
break;
/* configure TIMER_CH_1 */
case TIMER_CH_1:
TIMER_CH1CV(timer_periph) = 0U;
break;
/* configure TIMER_CH_2 */
case TIMER_CH_2:
TIMER_CH2CV(timer_periph) = 0U;
break;
/* configure TIMER_CH_3 */
case TIMER_CH_3:
TIMER_CH3CV(timer_periph) = 0U;
break;
/* configure TIMER_MCH_0 */
case TIMER_MCH_0:
TIMER_MCH0CV(timer_periph) = 0U;
break;
/* configure TIMER_MCH_1 */
case TIMER_MCH_1:
TIMER_MCH1CV(timer_periph) = 0U;
break;
/* configure TIMER_MCH_2 */
case TIMER_MCH_2:
TIMER_MCH2CV(timer_periph) = 0U;
break;
/* configure TIMER_MCH_3 */
case TIMER_MCH_3:
TIMER_MCH3CV(timer_periph) = 0U;
break;
default:
break;
}
} else if(TIMER_COUNTER_DOWN == cnt_dir) {
/* read the CAR value */
uint64_t value = timer_autoreload_value_read(timer_periph);
switch(channel) {
/* configure TIMER_CH_0 */
case TIMER_CH_0:
TIMER_CH0CV(timer_periph) = (uint32_t)value;
break;
/* configure TIMER_CH_1 */
case TIMER_CH_1:
TIMER_CH1CV(timer_periph) = (uint32_t)value;
break;
/* configure TIMER_CH_2 */
case TIMER_CH_2:
TIMER_CH2CV(timer_periph) = (uint32_t)value;
break;
/* configure TIMER_CH_3 */
case TIMER_CH_3:
TIMER_CH3CV(timer_periph) = (uint32_t)value;
break;
/* configure TIMER_MCH_0 */
case TIMER_MCH_0:
TIMER_MCH0CV(timer_periph) = (uint32_t)value;
break;
/* configure TIMER_MCH_1 */
case TIMER_MCH_1:
TIMER_MCH1CV(timer_periph) = (uint32_t)value;
break;
/* configure TIMER_MCH_2 */
case TIMER_MCH_2:
TIMER_MCH2CV(timer_periph) = (uint32_t)value;
break;
/* configure TIMER_MCH_3 */
case TIMER_MCH_3:
TIMER_MCH3CV(timer_periph) = (uint32_t)value;
break;
default:
break;
}
} else {
/* illegal parameters */
}
}
}
/*!
\brief configure TIMER update source
\param[in] timer_periph: TIMERx(x=0~7,14~16,22,23,40~44,50,51)
\param[in] update:
only one parameter can be selected which is shown as below:
\arg TIMER_UPDATE_SRC_GLOBAL: update generate by setting of UPG bit or the counter overflow/underflow,
or the slave mode controller trigger
\arg TIMER_UPDATE_SRC_REGULAR: update generate only by counter overflow/underflow
\param[out] none
\retval none
*/
void timer_update_source_config(uint32_t timer_periph, uint32_t update)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0017U), ERR_PERIPH);
} else if(NOT_TIMER_UPDATE(update)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0017U), ERR_PARAM_INVALID);
} else
#endif /* FW_DEBUG_ERR_REPORT */
{
if(TIMER_UPDATE_SRC_REGULAR == update) {
TIMER_CTL0(timer_periph) |= (uint32_t)TIMER_CTL0_UPS;
} else if(TIMER_UPDATE_SRC_GLOBAL == update) {
TIMER_CTL0(timer_periph) &= (~(uint32_t)TIMER_CTL0_UPS);
} else {
/* illegal parameters */
}
}
}
/*!
\brief enable the TIMER DMA
\param[in] timer_periph: TIMERx(x=0~7,14~16,22,23,40~44,50,51)
\param[in] dma: specify which DMA to enable
one or more parameters can be selected which are shown as below:
\arg TIMER_DMA_UPD: update DMA request, TIMERx(x=0~7,14~16,22,23,40~44,50,51)
\arg TIMER_DMA_CH0D: channel 0 DMA request, TIMERx(x=0~4,7,14~16,22,23,40~44)
\arg TIMER_DMA_CH1D: channel 1 DMA request, TIMERx(x=0~4,7,14,22,23,40~44)
\arg TIMER_DMA_CH2D: channel 2 DMA request, TIMERx(x=0~4,7,22,23)
\arg TIMER_DMA_CH3D: channel 3 DMA request, TIMERx(x=0~4,7,22,23)
\arg TIMER_DMA_CMTD: channel commutation DMA request, TIMERx(x=0,7,14~16,40~44)
\arg TIMER_DMA_TRGD: trigger DMA request, TIMERx(x=0~4,7,14,22,23,40~44)
\arg TIMER_DMA_MCH0D: multi mode channel 0 DMA request, TIMERx(x=0,7,14~16,40~44)
\arg TIMER_DMA_MCH1D: multi mode channel 1 DMA request, TIMERx(x=0,7)
\arg TIMER_DMA_MCH2D: multi mode channel 2 DMA request, TIMERx(x=0,7)
\arg TIMER_DMA_MCH3D: multi mode channel 3 DMA request, TIMERx(x=0,7)
\param[out] none
\retval none
*/
void timer_dma_enable(uint32_t timer_periph, uint32_t dma)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0018U), ERR_PERIPH);
} else if(NOT_TIMER_DMA(dma)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0018U), ERR_PARAM_INVALID);
}else
#endif /* FW_DEBUG_ERR_REPORT */
{
TIMER_DMAINTEN(timer_periph) |= (uint32_t) dma;
}
}
/*!
\brief disable the TIMER DMA
\param[in] timer_periph: TIMERx(x=0~7,14~16,22,23,40~44,50,51)
\param[in] dma: specify which DMA to enable
one or more parameters can be selected which are shown as below:
\arg TIMER_DMA_UPD: update DMA request, TIMERx(x=0~7,14~16,22,23,40~44,50,51)
\arg TIMER_DMA_CH0D: channel 0 DMA request, TIMERx(x=0~4,7,14~16,22,23,40~44)
\arg TIMER_DMA_CH1D: channel 1 DMA request, TIMERx(x=0~4,7,14,22,23,40~44)
\arg TIMER_DMA_CH2D: channel 2 DMA request, TIMERx(x=0~4,7,22,23)
\arg TIMER_DMA_CH3D: channel 3 DMA request, TIMERx(x=0~4,7,22,23)
\arg TIMER_DMA_CMTD: channel commutation DMA request, TIMERx(x=0,7,14~16,40~44)
\arg TIMER_DMA_TRGD: trigger DMA request, TIMERx(x=0~4,7,14,22,23,40~44)
\arg TIMER_DMA_MCH0D: multi mode channel 0 DMA request, TIMERx(x=0,7,14~16,40~44)
\arg TIMER_DMA_MCH1D: multi mode channel 1 DMA request, TIMERx(x=0,7)
\arg TIMER_DMA_MCH2D: multi mode channel 2 DMA request, TIMERx(x=0,7)
\arg TIMER_DMA_MCH3D: multi mode channel 3 DMA request, TIMERx(x=0,7)
\param[out] none
\retval none
*/
void timer_dma_disable(uint32_t timer_periph, uint32_t dma)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0019U), ERR_PERIPH);
} else if(NOT_TIMER_DMA(dma)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0019U), ERR_PARAM_INVALID);
}else
#endif /* FW_DEBUG_ERR_REPORT */
{
TIMER_DMAINTEN(timer_periph) &= (~(uint32_t)(dma));
}
}
/*!
\brief channel DMA request source selection
\param[in] timer_periph: TIMERx(x=0~4,7,14~16,22,23,40~44)
\param[in] dma_request: channel DMA request source selection
only one parameter can be selected which is shown as below:
\arg TIMER_DMAREQUEST_CHANNELEVENT: DMA request of channel n is sent when channel n event occurs
\arg TIMER_DMAREQUEST_UPDATEEVENT: DMA request of channel n is sent when update event occurs
\param[out] none
\retval none
*/
void timer_channel_dma_request_source_select(uint32_t timer_periph, uint32_t dma_request)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x001AU), ERR_PERIPH);
} else if(NOT_TIMER_DMA_REQUEST(dma_request)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x001AU), ERR_PARAM_INVALID);
}else
#endif /* FW_DEBUG_ERR_REPORT */
{
if(TIMER_DMAREQUEST_UPDATEEVENT == dma_request) {
TIMER_CTL1(timer_periph) |= (uint32_t)TIMER_CTL1_DMAS;
} else if(TIMER_DMAREQUEST_CHANNELEVENT == dma_request) {
TIMER_CTL1(timer_periph) &= (~(uint32_t)TIMER_CTL1_DMAS);
} else {
/* illegal parameters */
}
}
}
/*!
\brief configure the TIMER DMA transfer
\param[in] timer_periph: TIMERx(x=0~4,7,14~16,22,23,40~44)
\param[in] dma_baseaddr: DMA access base address
only one parameter can be selected which is shown as below:
\arg TIMER_DMACFG_DMATA_CTL0: DMA transfer address is TIMER_CTL0, TIMERx(x=0~4,7,14~16,22,23,40~44)
\arg TIMER_DMACFG_DMATA_CTL1: DMA transfer address is TIMER_CTL1, TIMERx(x=0~4,7,14~16,22,23,40~44)
\arg TIMER_DMACFG_DMATA_SMCFG: DMA transfer address is TIMER_SMCFG, TIMERx(x=0~4,7,14,22,23,40~44)
\arg TIMER_DMACFG_DMATA_DMAINTEN: DMA transfer address is TIMER_DMAINTEN, TIMERx(x=0~4,7,14~16,22,23,40~44)
\arg TIMER_DMACFG_DMATA_INTF: DMA transfer address is TIMER_INTF, TIMERx(x=0~4,7,14~16,22,23,40~44)
\arg TIMER_DMACFG_DMATA_SWEVG: DMA transfer address is TIMER_SWEVG, TIMERx(x=0~4,7,14~16,22,23,40~44)
\arg TIMER_DMACFG_DMATA_CHCTL0: DMA transfer address is TIMER_CHCTL0, TIMERx(x=0~4,7,14~16,22,23,40~44)
\arg TIMER_DMACFG_DMATA_CHCTL1: DMA transfer address is TIMER_CHCTL1, TIMERx(x=0~4,7,22,23)
\arg TIMER_DMACFG_DMATA_CHCTL2: DMA transfer address is TIMER_CHCTL2, TIMERx(x=0~4,7,14~16,22,23,40~44)
\arg TIMER_DMACFG_DMATA_CNT: DMA transfer address is TIMER_CNT, TIMERx(x=0~4,7,14~16,22,23,40~44)
\arg TIMER_DMACFG_DMATA_PSC: DMA transfer address is TIMER_PSC, TIMERx(x=0~4,7,14~16,22,23,40~44)
\arg TIMER_DMACFG_DMATA_CAR: DMA transfer address is TIMER_CAR, TIMERx(x=0~4,7,14~16,22,23,40~44)
\arg TIMER_DMACFG_DMATA_CREP0: DMA transfer address is TIMER_CREP0, TIMERx(x=0,7,14~16,40~44)
\arg TIMER_DMACFG_DMATA_CH0CV: DMA transfer address is TIMER_CH0CV, TIMERx(x=0~4,7,14~16,22,23,40~44)
\arg TIMER_DMACFG_DMATA_CH1CV: DMA transfer address is TIMER_CH1CV, TIMERx(x=0~4,7,14,22,23)
\arg TIMER_DMACFG_DMATA_CH2CV: DMA transfer address is TIMER_CH2CV, TIMERx(x=0~4,7,22,23)
\arg TIMER_DMACFG_DMATA_CH3CV: DMA transfer address is TIMER_CH3CV, TIMERx(x=0~4,7,22,23)
\arg TIMER_DMACFG_DMATA_CCHP: DMA transfer address is TIMER_CCHP, TIMERx(x=0,7,14~16,40~44)
\arg TIMER_DMACFG_DMATA_MCHCTL0: DMA transfer address is TIMER_MCHCTL0, TIMERx(x=0,7,14~16,40~44)
\arg TIMER_DMACFG_DMATA_MCHCTL1: DMA transfer address is TIMER_MCHCTL1, TIMERx(x=0,7)
\arg TIMER_DMACFG_DMATA_MCHCTL2: DMA transfer address is TIMER_MCHCTL2, TIMERx(x=0,7,14~16,40~44)
\arg TIMER_DMACFG_DMATA_MCH0CV: DMA transfer address is TIMER_MCH0CV, TIMERx(x=0,7,14~16,40~44)
\arg TIMER_DMACFG_DMATA_MCH1CV: DMA transfer address is TIMER_MCH1CV, TIMERx(x=0,7)
\arg TIMER_DMACFG_DMATA_MCH2CV: DMA transfer address is TIMER_MCH2CV, TIMERx(x=0,7)
\arg TIMER_DMACFG_DMATA_MCH3CV: DMA transfer address is TIMER_MCH3CV, TIMERx(x=0,7)
\arg TIMER_DMACFG_DMATA_CH0COMV_ADD: DMA transfer address is TIMER_CH0COMV_ADD, TIMERx(x=0~4,7,14,22,23)
\arg TIMER_DMACFG_DMATA_CH1COMV_ADD: DMA transfer address is TIMER_CH1COMV_ADD, TIMERx(x=0~4,7,14,22,23)
\arg TIMER_DMACFG_DMATA_CH2COMV_ADD: DMA transfer address is TIMER_CH2COMV_ADD, TIMERx(x=0~4,7,22,23)
\arg TIMER_DMACFG_DMATA_CH3COMV_ADD: DMA transfer address is TIMER_CH3COMV_ADD, TIMERx(x=0~4,7,22,23)
\arg TIMER_DMACFG_DMATA_CTL2: DMA transfer address is TIMER_CTL2, TIMERx(x=0~4,7,14~16,22,23,40~44)
\arg TIMER_DMACFG_DMATA_FCCHP0: DMA transfer address is TIMER_FCCHP0, TIMERx(x=0,7)
\arg TIMER_DMACFG_DMATA_FCCHP1: DMA transfer address is TIMER_FCCHP1, TIMERx(x=0,7)
\arg TIMER_DMACFG_DMATA_FCCHP2: DMA transfer address is TIMER_FCCHP2, TIMERx(x=0,7)
\arg TIMER_DMACFG_DMATA_FCCHP3: DMA transfer address is TIMER_FCCHP3, TIMERx(x=0,7)
\arg TIMER_DMACFG_DMATA_AFCTL0: DMA transfer address is TIMER_AFCTL0, TIMERx(x=0,7,14~16,40~44)
\arg TIMER_DMACFG_DMATA_AFCTL1: DMA transfer address is TIMER_AFCTL1, TIMERx(x=0,7)
\arg TIMER_DMACFG_DMATA_WDGPER: DMA transfer address is TIMER_WDGPER, TIMERx(x=0~4,7,22,23)
\arg TIMER_DMACFG_DMATA_CREP1: DMA transfer address is TIMER_CREP1, TIMERx(x=0,7,14~16,40~44)
\param[in] dma_lenth:
only one parameter can be selected which is shown as below:
\arg TIMER_DMACFG_DMATC_xTRANSFER(x=1~38): DMA transfer x time
\param[out] none
\retval none
*/
void timer_dma_transfer_config(uint32_t timer_periph, uint32_t dma_baseaddr, uint32_t dma_lenth)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x001BU), ERR_PERIPH);
} else if(NOT_TIMER_DMA_BASEADDR(dma_baseaddr)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x001BU), ERR_PARAM_INVALID);
} else if(NOT_TIMER_DMA_LENGTH(dma_lenth)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x001BU), ERR_PARAM_INVALID);
}else
#endif /* FW_DEBUG_ERR_REPORT */
{
TIMER_DMACFG(timer_periph) &= (~(uint32_t)(TIMER_DMACFG_DMATA | TIMER_DMACFG_DMATC));
TIMER_DMACFG(timer_periph) |= (uint32_t)(dma_baseaddr | dma_lenth);
}
}
/*!
\brief software generate events
\param[in] timer_periph: TIMERx(x=0~7,14~16,22,23,40~44,50,51)
\param[in] event: the timer software event generation sources
one or more parameters can be selected which are shown as below:
\arg TIMER_EVENT_SRC_UPG: update event generation, TIMERx(x=0~7,14~16,22,23,40~44,50,51)
\arg TIMER_EVENT_SRC_CH0G: channel 0 capture or compare event generation, TIMERx(x=0~4,7,14~16,22,23,40~44)
\arg TIMER_EVENT_SRC_CH1G: channel 1 capture or compare event generation, TIMERx(x=0~4,7,14,22,23,40~44)
\arg TIMER_EVENT_SRC_CH2G: channel 2 capture or compare event generation, TIMERx(x=0~4,7,22,23)
\arg TIMER_EVENT_SRC_CH3G: channel 3 capture or compare event generation, TIMERx(x=0~4,7,22,23)
\arg TIMER_EVENT_SRC_CMTG: channel commutation event generation, TIMERx(x=0,7,14~16,40~44)
\arg TIMER_EVENT_SRC_TRGG: trigger event generation, TIMERx(x=0~4,7,14,22,23,40~44)
\arg TIMER_EVENT_SRC_BRK0G: BREAK0 event generation, TIMERx(x=0,7,14~16,40~44)
\arg TIMER_EVENT_SRC_BRK1G: BREAK1 event generation, TIMERx(x=0,7)
\arg TIMER_EVENT_SRC_MCH0G: multi mode channel 0 capture or compare event generation, TIMERx(x=0,7,14~16,40~44)
\arg TIMER_EVENT_SRC_MCH1G: multi mode channel 1 capture or compare event generation, TIMERx(x=0,7)
\arg TIMER_EVENT_SRC_MCH2G: multi mode channel 2 capture or compare event generation, TIMERx(x=0,7)
\arg TIMER_EVENT_SRC_MCH3G: multi mode channel 3 capture or compare event generation, TIMERx(x=0,7)
\arg TIMER_EVENT_SRC_CH0COMADDG: channel 0 additional compare event generation, TIMERx(x=0~4,7,14,22,23)
\arg TIMER_EVENT_SRC_CH1COMADDG: channel 1 additional compare event generation, TIMERx(x=0~4,7,14,22,23)
\arg TIMER_EVENT_SRC_CH2COMADDG: channel 2 additional compare event generation, TIMERx(x=0~4,7,22,23)
\arg TIMER_EVENT_SRC_CH3COMADDG: channel 3 additional compare event generation, TIMERx(x=0~4,7,22,23)
\param[out] none
\retval none
*/
void timer_event_software_generate(uint32_t timer_periph, uint32_t event)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x001CU), ERR_PERIPH);
} else if(NOT_TIMER_EVENT(event)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x001CU), ERR_PARAM_INVALID);
}else
#endif /* FW_DEBUG_ERR_REPORT */
{
TIMER_SWEVG(timer_periph) |= (uint32_t)event;
}
}
/*!
\brief initialize TIMER break parameter struct with a default value
\param[in] breakpara: TIMER break parameter struct
\param[out] none
\retval none
*/
void timer_break_struct_para_init(timer_break_parameter_struct *breakpara)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_VALID_POINTER(breakpara)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x001DU), ERR_PARAM_POINTER);
} else
#endif /* FW_DEBUG_ERR_REPORT */
{
/* initialize the break parameter struct member with the default value */
breakpara->runoffstate = TIMER_ROS_STATE_DISABLE;
breakpara->ideloffstate = TIMER_IOS_STATE_DISABLE;
breakpara->deadtime = 0U;
breakpara->outputautostate = TIMER_OUTAUTO_DISABLE;
breakpara->protectmode = TIMER_CCHP_PROT_OFF;
breakpara->break0state = TIMER_BREAK0_DISABLE;
breakpara->break0filter = 0U;
breakpara->break0polarity = TIMER_BREAK0_POLARITY_LOW;
breakpara->break0lock = TIMER_BREAK0_LK_DISABLE;
breakpara->break0release = TIMER_BREAK0_UNRELEASE;
breakpara->break1state = TIMER_BREAK1_DISABLE;
breakpara->break1filter = 0U;
breakpara->break1polarity = TIMER_BREAK1_POLARITY_LOW;
breakpara->break1lock = TIMER_BREAK1_LK_DISABLE;
breakpara->break1release = TIMER_BREAK1_UNRELEASE;
}
}
/*!
\brief configure TIMER break function
\param[in] timer_periph: TIMERx(x=0,7,14~16,40~44)
\param[in] breakpara: TIMER break parameter struct
runoffstate: TIMER_ROS_STATE_ENABLE, TIMER_ROS_STATE_DISABLE
ideloffstate: TIMER_IOS_STATE_ENABLE, TIMER_IOS_STATE_DISABLE
deadtime: 0~255
outputautostate: TIMER_OUTAUTO_ENABLE, TIMER_OUTAUTO_DISABLE
protectmode: TIMER_CCHP_PROT_OFF, TIMER_CCHP_PROT_0, TIMER_CCHP_PROT_1, TIMER_CCHP_PROT_2
break0state: TIMER_BREAK0_ENABLE, TIMER_BREAK0_DISABLE
break0filter: 0~15
break0polarity: TIMER_BREAK0_POLARITY_LOW, TIMER_BREAK0_POLARITY_HIGH
break0lock: TIMER_BREAK0_LK_ENABLE, TIMER_BREAK0_LK_DISABLE
break0release: TIMER_BREAK0_RELEASE, TIMER_BREAK0_UNRELEASE
break1state: TIMER_BREAK1_ENABLE, TIMER_BREAK1_DISABLE
break1filter: 0~15
break1polarity: TIMER_BREAK1_POLARITY_LOW, TIMER_BREAK1_POLARITY_HIGH
break1lock: TIMER_BREAK1_LK_ENABLE, TIMER_BREAK1_LK_DISABLE
break1release: TIMER_BREAK1_RELEASE, TIMER_BREAK1_UNRELEASE
\param[out] none
\retval none
*/
void timer_break_config(uint32_t timer_periph, timer_break_parameter_struct *breakpara)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x001EU), ERR_PERIPH);
} else if(NOT_VALID_POINTER(breakpara)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x001EU), ERR_PARAM_POINTER);
} else
#endif /* FW_DEBUG_ERR_REPORT */
{
if((TIMER0 == timer_periph) || (TIMER7 == timer_periph)) {
TIMER_CCHP(timer_periph) = (uint32_t)(((uint32_t)(breakpara->runoffstate)) |
((uint32_t)(breakpara->ideloffstate)) |
((uint32_t)(breakpara->deadtime)) |
((uint32_t)(breakpara->outputautostate)) |
((uint32_t)(breakpara->protectmode)) |
((uint32_t)(breakpara->break0state)) |
((uint32_t)(breakpara->break0filter)) |
((uint32_t)(breakpara->break0polarity)) |
((uint32_t)(breakpara->break0lock)) |
((uint32_t)(breakpara->break0release)) |
((uint32_t)(breakpara->break1state)) |
((uint32_t)(breakpara->break1filter)) |
((uint32_t)(breakpara->break1polarity)) |
((uint32_t)(breakpara->break1lock)) |
((uint32_t)(breakpara->break1release)));
} else if((TIMER14 == timer_periph) || (TIMER15 == timer_periph) || (TIMER16 == timer_periph) || (TIMER40 == timer_periph) || \
(TIMER41 == timer_periph) || (TIMER42 == timer_periph) || (TIMER43 == timer_periph) || (TIMER44 == timer_periph)) {
TIMER_CCHP(timer_periph) = (uint32_t)(((uint32_t)(breakpara->runoffstate)) |
((uint32_t)(breakpara->ideloffstate)) |
((uint32_t)(breakpara->deadtime)) |
((uint32_t)(breakpara->outputautostate)) |
((uint32_t)(breakpara->protectmode)) |
((uint32_t)(breakpara->break0state)) |
((uint32_t)(breakpara->break0filter)) |
((uint32_t)(breakpara->break0polarity)) |
((uint32_t)(breakpara->break0lock)) |
((uint32_t)(breakpara->break0release)));
} else {
/* illegal parameters */
}
}
}
/*!
\brief enable TIMER break function
\param[in] timer_periph: TIMERx(x=0,7,14~16,40~44)
\param[in] break_num: TIMER BREAKx
only one parameter can be selected which is shown as below:
\arg TIMER_BREAK0: BREAK0 input signals, TIMERx(x=0,7,14~16,40~44)
\arg TIMER_BREAK1: BREAK1 input signals, TIMERx(x=0,7)
\param[out] none
\retval none
*/
void timer_break_enable(uint32_t timer_periph, uint16_t break_num)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x001FU), ERR_PERIPH);
} else if(NOT_TIMER_BREAK_NUM(break_num)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x001FU), ERR_PARAM_INVALID);
} else
#endif
{
if(TIMER_BREAK0 == break_num) {
TIMER_CCHP(timer_periph) |= (uint32_t)TIMER_CCHP_BRK0EN;
} else if(TIMER_BREAK1 == break_num) {
TIMER_CCHP(timer_periph) |= (uint32_t)TIMER_CCHP_BRK1EN;
} else {
}
}
}
/*!
\brief disable TIMER break function
\param[in] timer_periph: TIMERx(x=0,7,14~16,40~44)
\param[in] break_num: TIMER BREAKx
only one parameter can be selected which is shown as below:
\arg TIMER_BREAK0: BREAK0 input signals, TIMERx(x=0,7,14~16,40~44)
\arg TIMER_BREAK1: BREAK1 input signals, TIMERx(x=0,7)
\param[out] none
\retval none
*/
void timer_break_disable(uint32_t timer_periph, uint16_t break_num)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0020U), ERR_PERIPH);
} else if(NOT_TIMER_BREAK_NUM(break_num)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0020U), ERR_PARAM_INVALID);
} else
#endif
{
if(TIMER_BREAK0 == break_num) {
TIMER_CCHP(timer_periph) &= (~(uint32_t)TIMER_CCHP_BRK0EN);
} else if(TIMER_BREAK1 == break_num) {
TIMER_CCHP(timer_periph) &= (~(uint32_t)TIMER_CCHP_BRK1EN);
} else {
}
}
}
/*!
\brief enable TIMER output automatic function
\param[in] timer_periph: TIMERx(x=0,7,14~16,40~44)
\param[out] none
\retval none
*/
void timer_automatic_output_enable(uint32_t timer_periph)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0021U), ERR_PERIPH);
} else
#endif
{
TIMER_CCHP(timer_periph) |= (uint32_t)TIMER_CCHP_OAEN;
}
}
/*!
\brief disable TIMER output automatic function
\param[in] timer_periph: TIMERx(x=0,7,14~16,40~44)
\param[out] none
\retval none
*/
void timer_automatic_output_disable(uint32_t timer_periph)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0022U), ERR_PERIPH);
} else
#endif
{
TIMER_CCHP(timer_periph) &= (~(uint32_t)TIMER_CCHP_OAEN);
}
}
/*!
\brief configure TIMER primary output function
\param[in] timer_periph: TIMERx(x=0,7,14~16,40~44)
\param[in] newvalue: ENABLE or DISABLE
\param[out] none
\retval none
*/
void timer_primary_output_config(uint32_t timer_periph, ControlStatus newvalue)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0023U), ERR_PERIPH);
} else
#endif
{
if(ENABLE == newvalue) {
TIMER_CCHP(timer_periph) |= (uint32_t)TIMER_CCHP_POEN;
} else {
TIMER_CCHP(timer_periph) &= (~(uint32_t)TIMER_CCHP_POEN);
}
}
}
/*!
\brief configure channel commutation control shadow register
\param[in] timer_periph: TIMERx(x=0,7,14~16,40~44)
\param[in] newvalue: ENABLE or DISABLE
\param[out] none
\retval none
*/
void timer_channel_control_shadow_config(uint32_t timer_periph, ControlStatus newvalue)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0024U), ERR_PERIPH);
} else
#endif
{
if(ENABLE == newvalue) {
TIMER_CTL1(timer_periph) |= (uint32_t)TIMER_CTL1_CCSE;
} else {
TIMER_CTL1(timer_periph) &= (~(uint32_t)TIMER_CTL1_CCSE);
}
}
}
/*!
\brief configure TIMER channel control shadow register update control
\param[in] timer_periph: TIMERx(x=0,7,14~16,40~44)
\param[in] ccuctl: channel control shadow register update control
only one parameter can be selected which is shown as below:
\arg TIMER_UPDATECTL_CCU: the shadow registers update by when CMTG bit is set
\arg TIMER_UPDATECTL_CCUTRI: the shadow registers update by when CMTG bit is set or an rising edge of TRGI occurs
\arg TIMER_UPDATECTL_CCUOVER: the shadow registers update by when the overflow event occurs
\arg TIMER_UPDATECTL_CCUUNDER: the shadow registers update by when the underflow event occurs
\arg TIMER_UPDATECTL_CCUOVERUNDER: the shadow registers update by when the overflow or underflow event occurs
\param[out] none
\retval none
*/
void timer_channel_control_shadow_update_config(uint32_t timer_periph, uint32_t ccuctl)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0025U), ERR_PERIPH);
} else if(NOT_TIMER_CCUC(ccuctl)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0025U), ERR_PARAM_INVALID);
} else
#endif
{
TIMER_CTL1(timer_periph) &= (~(uint32_t)TIMER_CTL1_CCUC);
TIMER_CTL1(timer_periph) |= (uint32_t)ccuctl;
}
}
/*!
\brief initialize TIMER channel output parameter struct with a default value
\param[in] ocpara: TIMER channel n output parameter struct
\param[out] none
\retval none
*/
void timer_channel_output_struct_para_init(timer_oc_parameter_struct *ocpara)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_VALID_POINTER(ocpara)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0026U), ERR_PARAM_POINTER);
} else
#endif /* FW_DEBUG_ERR_REPORT */
{
/* initialize the channel output parameter struct member with the default value */
ocpara->outputstate = TIMER_CCX_DISABLE;
ocpara->outputnstate = TIMER_CCXN_DISABLE;
ocpara->ocpolarity = TIMER_OC_POLARITY_HIGH;
ocpara->ocnpolarity = TIMER_OCN_POLARITY_HIGH;
ocpara->ocidlestate = TIMER_OC_IDLE_STATE_LOW;
ocpara->ocnidlestate = TIMER_OCN_IDLE_STATE_LOW;
}
}
/*!
\brief configure TIMER channel output function
\param[in] timer_periph: TIMERx(x=0~4,7,14~16,22,23,40~44)
\param[in] channel: TIMER channel
only one parameter can be selected which is shown as below:
\arg TIMER_CH_0: TIMER channel 0(TIMERx(x=0~4,7,14~16,22,23,40~44))
\arg TIMER_CH_1: TIMER channel 1(TIMERx(x=0~4,7,14,22,23,40~44))
\arg TIMER_CH_2: TIMER channel 2(TIMERx(x=0~4,7,22,23))
\arg TIMER_CH_3: TIMER channel 3(TIMERx(x=0~4,7,22,23))
\param[in] ocpara: TIMER channel output parameter struct
outputstate: TIMER_CCX_ENABLE, TIMER_CCX_DISABLE
outputnstate: TIMER_CCXN_ENABLE, TIMER_CCXN_DISABLE
ocpolarity: TIMER_OC_POLARITY_HIGH, TIMER_OC_POLARITY_LOW
ocnpolarity: TIMER_OCN_POLARITY_HIGH, TIMER_OCN_POLARITY_LOW
ocidlestate: TIMER_OC_IDLE_STATE_LOW, TIMER_OC_IDLE_STATE_HIGH
ocnidlestate: TIMER_OCN_IDLE_STATE_LOW, TIMER_OCN_IDLE_STATE_HIGH
\param[out] none
\retval none
*/
void timer_channel_output_config(uint32_t timer_periph, uint16_t channel, timer_oc_parameter_struct *ocpara)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0027U), ERR_PERIPH);
} else if(NOT_TIMER_CHANNEL(channel)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0027U), ERR_PARAM_INVALID);
} else if(NOT_VALID_POINTER(ocpara)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0027U), ERR_PARAM_POINTER);
} else
#endif /* FW_DEBUG_ERR_REPORT */
{
switch(channel) {
/* configure TIMER_CH_0 */
case TIMER_CH_0:
/* reset the CH0EN bit */
TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_CH0EN);
/* set the CH0EN bit */
TIMER_CHCTL2(timer_periph) |= (uint32_t)ocpara->outputstate;
/* reset the CH0P bit */
TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_CH0P);
/* set the CH0P bit */
TIMER_CHCTL2(timer_periph) |= (uint32_t)ocpara->ocpolarity;
if((TIMER0 == timer_periph) || (TIMER7 == timer_periph) || (TIMER14 == timer_periph) || (TIMER15 == timer_periph) || \
(TIMER16 == timer_periph) || (TIMER40 == timer_periph) || (TIMER41 == timer_periph) || (TIMER42 == timer_periph) || \
(TIMER43 == timer_periph) || (TIMER44 == timer_periph)) {
/* reset the MCH0EN bit */
TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_MCH0EN);
/* set the MCH0EN bit */
TIMER_CHCTL2(timer_periph) |= (uint32_t)ocpara->outputnstate;
/* reset the MCH0P bit */
TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_MCH0P);
/* set the MCH0P bit */
TIMER_CHCTL2(timer_periph) |= (uint32_t)ocpara->ocnpolarity;
/* reset the ISO0 bit */
TIMER_CTL1(timer_periph) &= (~(uint32_t)TIMER_CTL1_ISO0);
/* set the ISO0 bit */
TIMER_CTL1(timer_periph) |= (uint32_t)ocpara->ocidlestate;
/* reset the ISO0N bit */
TIMER_CTL1(timer_periph) &= (~(uint32_t)TIMER_CTL1_ISO0N);
/* set the ISO0N bit */
TIMER_CTL1(timer_periph) |= (uint32_t)ocpara->ocnidlestate;
}
TIMER_CHCTL0(timer_periph) &= (~(uint32_t)TIMER_CHCTL0_CH0MS);
break;
/* configure TIMER_CH_1 */
case TIMER_CH_1:
/* reset the CH1EN bit */
TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_CH1EN);
/* set the CH1EN bit */
TIMER_CHCTL2(timer_periph) |= ((uint32_t)(ocpara->outputstate) << 4U);
/* reset the CH1P bit */
TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_CH1P);
/* set the CH1P bit */
TIMER_CHCTL2(timer_periph) |= ((uint32_t)(ocpara->ocpolarity) << 4U);
if((TIMER0 == timer_periph) || (TIMER7 == timer_periph)) {
/* reset the MCH1EN bit */
TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_MCH1EN);
/* set the MCH1EN bit */
TIMER_CHCTL2(timer_periph) |= ((uint32_t)(ocpara->outputnstate) << 4U);
/* reset the MCH1P bit */
TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_MCH1P);
/* set the MCH1P bit */
TIMER_CHCTL2(timer_periph) |= ((uint32_t)(ocpara->ocnpolarity) << 4U);
/* reset the ISO1 bit */
TIMER_CTL1(timer_periph) &= (~(uint32_t)TIMER_CTL1_ISO1);
/* set the ISO1 bit */
TIMER_CTL1(timer_periph) |= ((uint32_t)(ocpara->ocidlestate) << 2U);
/* reset the ISO1N bit */
TIMER_CTL1(timer_periph) &= (~(uint32_t)TIMER_CTL1_ISO1N);
/* set the ISO1N bit */
TIMER_CTL1(timer_periph) |= ((uint32_t)(ocpara->ocnidlestate) << 2U);
}
if((TIMER14 == timer_periph) || (TIMER40 == timer_periph) || (TIMER41 == timer_periph) || (TIMER42 == timer_periph) || \
(TIMER43 == timer_periph) || (TIMER44 == timer_periph)) {
/* reset the ISO1 bit */
TIMER_CTL1(timer_periph) &= (~(uint32_t)TIMER_CTL1_ISO1);
/* set the ISO1 bit */
TIMER_CTL1(timer_periph) |= ((uint32_t)(ocpara->ocidlestate) << 2U);
}
TIMER_CHCTL0(timer_periph) &= (~(uint32_t)TIMER_CHCTL0_CH1MS);
break;
/* configure TIMER_CH_2 */
case TIMER_CH_2:
/* reset the CH2EN bit */
TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_CH2EN);
/* set the CH2EN bit */
TIMER_CHCTL2(timer_periph) |= ((uint32_t)(ocpara->outputstate) << 8U);
/* reset the CH2P bit */
TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_CH2P);
/* set the CH2P bit */
TIMER_CHCTL2(timer_periph) |= ((uint32_t)(ocpara->ocpolarity) << 8U);
if((TIMER0 == timer_periph) || (TIMER7 == timer_periph)) {
/* reset the MCH2EN bit */
TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_MCH2EN);
/* set the MCH2EN bit */
TIMER_CHCTL2(timer_periph) |= ((uint32_t)(ocpara->outputnstate) << 8U);
/* reset the MCH2P bit */
TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_MCH2P);
/* set the MCH2P bit */
TIMER_CHCTL2(timer_periph) |= ((uint32_t)(ocpara->ocnpolarity) << 8U);
/* reset the ISO2 bit */
TIMER_CTL1(timer_periph) &= (~(uint32_t)TIMER_CTL1_ISO2);
/* set the ISO2 bit */
TIMER_CTL1(timer_periph) |= ((uint32_t)(ocpara->ocidlestate) << 4U);
/* reset the ISO2N bit */
TIMER_CTL1(timer_periph) &= (~(uint32_t)TIMER_CTL1_ISO2N);
/* set the ISO2N bit */
TIMER_CTL1(timer_periph) |= ((uint32_t)(ocpara->ocnidlestate) << 4U);
}
TIMER_CHCTL1(timer_periph) &= (~(uint32_t)TIMER_CHCTL1_CH2MS);
break;
/* configure TIMER_CH_3 */
case TIMER_CH_3:
/* reset the CH3EN bit */
TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_CH3EN);
/* set the CH3EN bit */
TIMER_CHCTL2(timer_periph) |= ((uint32_t)(ocpara->outputstate) << 12U);
/* reset the CH3P bit */
TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_CH3P);
/* set the CH3P bit */
TIMER_CHCTL2(timer_periph) |= ((uint32_t)(ocpara->ocpolarity) << 12U);
if((TIMER0 == timer_periph) || (TIMER7 == timer_periph)) {
/* reset the MCH3EN bit */
TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_MCH3EN);
/* set the MCH3EN bit */
TIMER_CHCTL2(timer_periph) |= ((uint32_t)(ocpara->outputnstate) << 12U);
/* reset the MCH3P bit */
TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_MCH3P);
/* set the MCH3P bit */
TIMER_CHCTL2(timer_periph) |= ((uint32_t)(ocpara->ocnpolarity) << 12U);
/* reset the ISO3 bit */
TIMER_CTL1(timer_periph) &= (~(uint32_t)TIMER_CTL1_ISO3);
/* set the ISO3 bit */
TIMER_CTL1(timer_periph) |= ((uint32_t)(ocpara->ocidlestate) << 6U);
/* reset the ISO3N bit */
TIMER_CTL1(timer_periph) &= (~(uint32_t)TIMER_CTL1_ISO3N);
/* set the ISO3N bit */
TIMER_CTL1(timer_periph) |= ((uint32_t)(ocpara->ocnidlestate) << 6U);
}
TIMER_CHCTL1(timer_periph) &= (~(uint32_t)TIMER_CHCTL1_CH3MS);
break;
default:
break;
}
}
}
/*!
\brief configure TIMER channel output compare mode
\param[in] timer_periph: TIMERx(x=0~4,7,14~16,22,23,40~44)
\param[in] channel: TIMER channel
only one parameter can be selected which is shown as below:
\arg TIMER_CH_0: TIMER channel 0(TIMERx(x=0~4,7,14~16,22,23,40~44))
\arg TIMER_CH_1: TIMER channel 1(TIMERx(x=0~4,7,14,22,23,40~44))
\arg TIMER_CH_2: TIMER channel 2(TIMERx(x=0~4,7,22,23))
\arg TIMER_CH_3: TIMER channel 3(TIMERx(x=0~4,7,22,23))
\arg TIMER_MCH_0: TIMER multi mode channel 0(TIMERx(x=0,7,14~16,40~44))
\arg TIMER_MCH_1: TIMER multi mode channel 1(TIMERx(x=0,7))
\arg TIMER_MCH_2: TIMER multi mode channel 2(TIMERx(x=0,7))
\arg TIMER_MCH_3: TIMER multi mode channel 3(TIMERx(x=0,7))
\param[in] ocmode: channel output compare mode
only one parameter can be selected which is shown as below:
\arg TIMER_OC_MODE_TIMING: timing mode
\arg TIMER_OC_MODE_ACTIVE: active mode
\arg TIMER_OC_MODE_INACTIVE: inactive mode
\arg TIMER_OC_MODE_TOGGLE: toggle mode
\arg TIMER_OC_MODE_LOW: force low mode
\arg TIMER_OC_MODE_HIGH: force high mode
\arg TIMER_OC_MODE_PWM0: PWM mode 0
\arg TIMER_OC_MODE_PWM1: PWM mode 1
\arg TIMER_OC_MODE_DSPM0: delayable SPM mode 0
\arg TIMER_OC_MODE_DSPM1: delayable SPM mode 1
\param[out] none
\retval none
*/
void timer_channel_output_mode_config(uint32_t timer_periph, uint16_t channel, uint32_t ocmode)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0028U), ERR_PERIPH);
} else if(NOT_TIMER_ALL_CHANNEL(channel)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0028U), ERR_PARAM_POINTER);
} else if(NOT_TIMER_OCMODE(ocmode)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0028U), ERR_PARAM_INVALID);
} else
#endif /* FW_DEBUG_ERR_REPORT */
{
switch(channel) {
/* configure TIMER_CH_0 */
case TIMER_CH_0:
TIMER_CHCTL0(timer_periph) &= (~(uint32_t)TIMER_CHCTL0_CH0COMCTL);
TIMER_CHCTL0(timer_periph) |= ocmode;
break;
/* configure TIMER_CH_1 */
case TIMER_CH_1:
TIMER_CHCTL0(timer_periph) &= (~(uint32_t)TIMER_CHCTL0_CH1COMCTL);
TIMER_CHCTL0(timer_periph) |= ((ocmode) << 8U);
break;
/* configure TIMER_CH_2 */
case TIMER_CH_2:
TIMER_CHCTL1(timer_periph) &= (~(uint32_t)TIMER_CHCTL1_CH2COMCTL);
TIMER_CHCTL1(timer_periph) |= ocmode;
break;
/* configure TIMER_CH_3 */
case TIMER_CH_3:
TIMER_CHCTL1(timer_periph) &= (~(uint32_t)TIMER_CHCTL1_CH3COMCTL);
TIMER_CHCTL1(timer_periph) |= ((ocmode) << 8U);
break;
/* configure TIMER_MCH_0 */
case TIMER_MCH_0:
TIMER_MCHCTL0(timer_periph) &= (~(uint32_t)TIMER_MCHCTL0_MCH0COMCTL);
TIMER_MCHCTL0(timer_periph) |= ocmode;
break;
/* configure TIMER_MCH_1 */
case TIMER_MCH_1:
TIMER_MCHCTL0(timer_periph) &= (~(uint32_t)TIMER_MCHCTL0_MCH1COMCTL);
TIMER_MCHCTL0(timer_periph) |= ((ocmode) << 8U);
break;
/* configure TIMER_MCH_2 */
case TIMER_MCH_2:
TIMER_MCHCTL1(timer_periph) &= (~(uint32_t)TIMER_MCHCTL1_MCH2COMCTL);
TIMER_MCHCTL1(timer_periph) |= ocmode;
break;
/* configure TIMER_MCH_3 */
case TIMER_MCH_3:
TIMER_MCHCTL1(timer_periph) &= (~(uint32_t)TIMER_MCHCTL1_MCH3COMCTL);
TIMER_MCHCTL1(timer_periph) |= ((ocmode) << 8U);
break;
default:
break;
}
}
}
/*!
\brief configure TIMER channel output pulse value
\param[in] timer_periph: TIMERx(x=0~4,7,14~16,22,23,40~44)
\param[in] channel: TIMER channel
only one parameter can be selected which is shown as below:
\arg TIMER_CH_0: TIMER channel 0(TIMERx(x=0~4,7,14~16,22,23,40~44))
\arg TIMER_CH_1: TIMER channel 1(TIMERx(x=0~4,7,14,22,23,40~44))
\arg TIMER_CH_2: TIMER channel 2(TIMERx(x=0~4,7,22,23))
\arg TIMER_CH_3: TIMER channel 3(TIMERx(x=0~4,7,22,23))
\arg TIMER_MCH_0: TIMER multi mode channel 0(TIMERx(x=0,7,14~16,40~44))
\arg TIMER_MCH_1: TIMER multi mode channel 1(TIMERx(x=0,7))
\arg TIMER_MCH_2: TIMER multi mode channel 2(TIMERx(x=0,7))
\arg TIMER_MCH_3: TIMER multi mode channel 3(TIMERx(x=0,7))
\param[in] pulse: channel output pulse value
\param[out] none
\retval none
*/
void timer_channel_output_pulse_value_config(uint32_t timer_periph, uint16_t channel, uint32_t pulse)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0029U), ERR_PERIPH);
} else if(NOT_TIMER_ALL_CHANNEL(channel)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0029U), ERR_PARAM_POINTER);
} else
#endif /* FW_DEBUG_ERR_REPORT */
{
switch(channel) {
/* configure TIMER_CH_0 */
case TIMER_CH_0:
TIMER_CH0CV(timer_periph) = (uint32_t)pulse;
break;
/* configure TIMER_CH_1 */
case TIMER_CH_1:
TIMER_CH1CV(timer_periph) = (uint32_t)pulse;
break;
/* configure TIMER_CH_2 */
case TIMER_CH_2:
TIMER_CH2CV(timer_periph) = (uint32_t)pulse;
break;
/* configure TIMER_CH_3 */
case TIMER_CH_3:
TIMER_CH3CV(timer_periph) = (uint32_t)pulse;
break;
/* configure TIMER_MCH_0 */
case TIMER_MCH_0:
TIMER_MCH0CV(timer_periph) = (uint32_t)pulse;
break;
/* configure TIMER_MCH_1 */
case TIMER_MCH_1:
TIMER_MCH1CV(timer_periph) = (uint32_t)pulse;
break;
/* configure TIMER_MCH_2 */
case TIMER_MCH_2:
TIMER_MCH2CV(timer_periph) = (uint32_t)pulse;
break;
/* configure TIMER_MCH_3 */
case TIMER_MCH_3:
TIMER_MCH3CV(timer_periph) = (uint32_t)pulse;
break;
default:
break;
}
}
}
/*!
\brief configure TIMER channel output shadow function
\param[in] timer_periph: TIMERx(x=0~4,7,14~16,22,23,40~44)
\param[in] channel: TIMER channel
only one parameter can be selected which is shown as below:
\arg TIMER_CH_0: TIMER channel 0(TIMERx(x=0~4,7,14~16,22,23,40~44))
\arg TIMER_CH_1: TIMER channel 1(TIMERx(x=0~4,7,14,22,23,40~44))
\arg TIMER_CH_2: TIMER channel 2(TIMERx(x=0~4,7,22,23))
\arg TIMER_CH_3: TIMER channel 3(TIMERx(x=0~4,7,22,23))
\arg TIMER_MCH_0: TIMER multi mode channel 0(TIMERx(x=0,7,14~16,40~44))
\arg TIMER_MCH_1: TIMER multi mode channel 1(TIMERx(x=0,7))
\arg TIMER_MCH_2: TIMER multi mode channel 2(TIMERx(x=0,7))
\arg TIMER_MCH_3: TIMER multi mode channel 3(TIMERx(x=0,7))
\param[in] ocshadow: channel output compare shadow
only one parameter can be selected which is shown as below:
\arg TIMER_OC_SHADOW_ENABLE: channel output compare shadow enable
\arg TIMER_OC_SHADOW_DISABLE: channel output compare shadow disable
\arg TIMER_OMC_SHADOW_ENABLE: multi mode channel output compare shadow enable
\arg TIMER_OMC_SHADOW_DISABLE: multi mode channel output compare shadow disable
\param[out] none
\retval none
*/
void timer_channel_output_shadow_config(uint32_t timer_periph, uint16_t channel, uint16_t ocshadow)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x002AU), ERR_PERIPH);
} else if(NOT_TIMER_ALL_CHANNEL(channel)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x002AU), ERR_PARAM_INVALID);
} else if(NOT_TIMER_OCSHADOW(ocshadow)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x002AU), ERR_PARAM_INVALID);
} else
#endif /* FW_DEBUG_ERR_REPORT */
{
switch(channel) {
/* configure TIMER_CH_0 */
case TIMER_CH_0:
TIMER_CHCTL0(timer_periph) &= (~(uint32_t)TIMER_CHCTL0_CH0COMSEN);
TIMER_CHCTL0(timer_periph) |= (uint32_t)ocshadow;
break;
/* configure TIMER_CH_1 */
case TIMER_CH_1:
TIMER_CHCTL0(timer_periph) &= (~(uint32_t)TIMER_CHCTL0_CH1COMSEN);
TIMER_CHCTL0(timer_periph) |= ((uint32_t)(ocshadow) << 8U);
break;
/* configure TIMER_CH_2 */
case TIMER_CH_2:
TIMER_CHCTL1(timer_periph) &= (~(uint32_t)TIMER_CHCTL1_CH2COMSEN);
TIMER_CHCTL1(timer_periph) |= (uint32_t)ocshadow;
break;
/* configure TIMER_CH_3 */
case TIMER_CH_3:
TIMER_CHCTL1(timer_periph) &= (~(uint32_t)TIMER_CHCTL1_CH3COMSEN);
TIMER_CHCTL1(timer_periph) |= ((uint32_t)(ocshadow) << 8U);
break;
/* configure TIMER_MCH_0 */
case TIMER_MCH_0:
TIMER_MCHCTL0(timer_periph) &= (~(uint32_t)TIMER_MCHCTL0_MCH0COMSEN);
TIMER_MCHCTL0(timer_periph) |= (uint32_t)ocshadow;
break;
/* configure TIMER_MCH_1 */
case TIMER_MCH_1:
TIMER_MCHCTL0(timer_periph) &= (~(uint32_t)TIMER_MCHCTL0_MCH1COMSEN);
TIMER_MCHCTL0(timer_periph) |= ((uint32_t)(ocshadow) << 8U);
break;
/* configure TIMER_MCH_2 */
case TIMER_MCH_2:
TIMER_MCHCTL1(timer_periph) &= (~(uint32_t)TIMER_MCHCTL1_MCH2COMSEN);
TIMER_MCHCTL1(timer_periph) |= (uint32_t)ocshadow;
break;
/* configure TIMER_MCH_3 */
case TIMER_MCH_3:
TIMER_MCHCTL1(timer_periph) &= (~(uint32_t)TIMER_MCHCTL1_MCH3COMSEN);
TIMER_MCHCTL1(timer_periph) |= ((uint32_t)(ocshadow) << 8U);
break;
default:
break;
}
}
}
/*!
\brief configure TIMER channel output clear function
\param[in] timer_periph: TIMERx(x=0~4,7,14~16,22,23,40~44)
\param[in] channel: TIMER channel
only one parameter can be selected which is shown as below:
\arg TIMER_CH_0: TIMER channel 0(TIMERx(x=0~4,7,14~16,22,23,40~44))
\arg TIMER_CH_1: TIMER channel 1(TIMERx(x=0~4,7,14,22,23,40~44))
\arg TIMER_CH_2: TIMER channel 2(TIMERx(x=0~4,7,22,23))
\arg TIMER_CH_3: TIMER channel 3(TIMERx(x=0~4,7,22,23))
\arg TIMER_MCH_0: TIMER multi mode channel 0(TIMERx(x=0,7,14~16,40~44))
\arg TIMER_MCH_1: TIMER multi mode channel 1(TIMERx(x=0,7))
\arg TIMER_MCH_2: TIMER multi mode channel 2(TIMERx(x=0,7))
\arg TIMER_MCH_3: TIMER multi mode channel 3(TIMERx(x=0,7))
\param[in] occlear: channel output clear function
only one parameter can be selected which is shown as below:
\arg TIMER_OC_CLEAR_ENABLE: channel output clear function enable
\arg TIMER_OC_CLEAR_DISABLE: channel output clear function disable
\arg TIMER_OMC_CLEAR_ENABLE: multi mode channel output clear function enable
\arg TIMER_OMC_CLEAR_DISABLE: multi mode channel output clear function disable
\param[out] none
\retval none
*/
void timer_channel_output_clear_config(uint32_t timer_periph, uint16_t channel, uint16_t occlear)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x002BU), ERR_PERIPH);
} else if(NOT_TIMER_ALL_CHANNEL(channel)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x002BU), ERR_PARAM_INVALID);
} else if(NOT_TIMER_OCCLEAR(occlear)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x002BU), ERR_PARAM_INVALID);
} else
#endif /* FW_DEBUG_ERR_REPORT */
{
switch(channel) {
/* configure TIMER_CH_0 */
case TIMER_CH_0:
TIMER_CHCTL0(timer_periph) &= (~(uint32_t)TIMER_CHCTL0_CH0COMCEN);
TIMER_CHCTL0(timer_periph) |= (uint32_t)occlear;
break;
/* configure TIMER_CH_1 */
case TIMER_CH_1:
TIMER_CHCTL0(timer_periph) &= (~(uint32_t)TIMER_CHCTL0_CH1COMCEN);
TIMER_CHCTL0(timer_periph) |= ((uint32_t)occlear << 8U);
break;
/* configure TIMER_CH_2 */
case TIMER_CH_2:
TIMER_CHCTL1(timer_periph) &= (~(uint32_t)TIMER_CHCTL1_CH2COMCEN);
TIMER_CHCTL1(timer_periph) |= (uint32_t)occlear;
break;
/* configure TIMER_CH_3 */
case TIMER_CH_3:
TIMER_CHCTL1(timer_periph) &= (~(uint32_t)TIMER_CHCTL1_CH3COMCEN);
TIMER_CHCTL1(timer_periph) |= ((uint32_t)occlear << 8U);
break;
/* configure TIMER_MCH_0 */
case TIMER_MCH_0:
TIMER_MCHCTL0(timer_periph) &= (~(uint32_t)TIMER_MCHCTL0_MCH0COMCEN);
TIMER_MCHCTL0(timer_periph) |= (uint32_t)occlear;
break;
/* configure TIMER_MCH_1 */
case TIMER_MCH_1:
TIMER_MCHCTL0(timer_periph) &= (~(uint32_t)TIMER_MCHCTL0_MCH1COMCEN);
TIMER_MCHCTL0(timer_periph) |= ((uint32_t)occlear << 8U);
break;
/* configure TIMER_MCH_2 */
case TIMER_MCH_2:
TIMER_MCHCTL1(timer_periph) &= (~(uint32_t)TIMER_MCHCTL1_MCH2COMCEN);
TIMER_MCHCTL1(timer_periph) |= (uint32_t)occlear;
break;
/* configure TIMER_MCH_3 */
case TIMER_MCH_3:
TIMER_MCHCTL1(timer_periph) &= (~(uint32_t)TIMER_MCHCTL1_MCH3COMCEN);
TIMER_MCHCTL1(timer_periph) |= ((uint32_t)occlear << 8U);
break;
default:
break;
}
}
}
/*!
\brief configure TIMER channel output polarity
\param[in] timer_periph: TIMERx(x=0~4,7,14~16,22,23,40~44)
\param[in] channel: TIMER channel
only one parameter can be selected which is shown as below:
\arg TIMER_CH_0: TIMER channel 0(TIMERx(x=0~4,7,14~16,22,23,40~44))
\arg TIMER_CH_1: TIMER channel 1(TIMERx(x=0~4,7,14,22,23,40~44))
\arg TIMER_CH_2: TIMER channel 2(TIMERx(x=0~4,7,22,23))
\arg TIMER_CH_3: TIMER channel 3(TIMERx(x=0~4,7,22,23))
\arg TIMER_MCH_0: TIMER multi mode channel 0(TIMERx(x=0,7,14~16,40~44))
\arg TIMER_MCH_1: TIMER multi mode channel 1(TIMERx(x=0,7))
\arg TIMER_MCH_2: TIMER multi mode channel 2(TIMERx(x=0,7))
\arg TIMER_MCH_3: TIMER multi mode channel 3(TIMERx(x=0,7))
\param[in] ocpolarity: channel output polarity
only one parameter can be selected which is shown as below:
\arg TIMER_OC_POLARITY_HIGH: channel output polarity is high
\arg TIMER_OC_POLARITY_LOW: channel output polarity is low
\arg TIMER_OMC_POLARITY_HIGH: multi mode channel output polarity is high
\arg TIMER_OMC_POLARITY_LOW: multi mode channel output polarity is low
\param[out] none
\retval none
*/
void timer_channel_output_polarity_config(uint32_t timer_periph, uint16_t channel, uint16_t ocpolarity)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x002CU), ERR_PERIPH);
} else if(NOT_TIMER_ALL_CHANNEL(channel)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x002CU), ERR_PARAM_INVALID);
} else if(NOT_TIMER_CHANNEL_OCPOLARITY(ocpolarity)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x002CU), ERR_PARAM_INVALID);
} else
#endif /* FW_DEBUG_ERR_REPORT */
{
switch(channel) {
/* configure TIMER_CH_0 */
case TIMER_CH_0:
TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_CH0P);
TIMER_CHCTL2(timer_periph) |= (uint32_t)ocpolarity;
break;
/* configure TIMER_CH_1 */
case TIMER_CH_1:
TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_CH1P);
TIMER_CHCTL2(timer_periph) |= ((uint32_t)ocpolarity << 4U);
break;
/* configure TIMER_CH_2 */
case TIMER_CH_2:
TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_CH2P);
TIMER_CHCTL2(timer_periph) |= ((uint32_t)ocpolarity << 8U);
break;
/* configure TIMER_CH_3 */
case TIMER_CH_3:
TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_CH3P);
TIMER_CHCTL2(timer_periph) |= ((uint32_t)ocpolarity << 12U);
break;
/* configure TIMER_MCH_0 */
case TIMER_MCH_0:
TIMER_MCHCTL2(timer_periph) &= (~(uint32_t)TIMER_MCHCTL2_MCH0FP);
TIMER_MCHCTL2(timer_periph) |= (uint32_t)ocpolarity;
break;
/* configure TIMER_MCH_1 */
case TIMER_MCH_1:
TIMER_MCHCTL2(timer_periph) &= (~(uint32_t)TIMER_MCHCTL2_MCH1FP);
TIMER_MCHCTL2(timer_periph) |= ((uint32_t)ocpolarity << 2U);
break;
/* configure TIMER_MCH_2 */
case TIMER_MCH_2:
TIMER_MCHCTL2(timer_periph) &= (~(uint32_t)TIMER_MCHCTL2_MCH2FP);
TIMER_MCHCTL2(timer_periph) |= (uint32_t)((uint32_t)ocpolarity << 4U);
break;
/* configure TIMER_MCH_3 */
case TIMER_MCH_3:
TIMER_MCHCTL2(timer_periph) &= (~(uint32_t)TIMER_MCHCTL2_MCH3FP);
TIMER_MCHCTL2(timer_periph) |= ((uint32_t)ocpolarity << 6U);
break;
default:
break;
}
}
}
/*!
\brief configure TIMER channel complementary output polarity
\param[in] timer_periph: TIMERx(x=0~4,7,14~16,22,23,40~44)
\param[in] channel: TIMER channel
only one parameter can be selected which is shown as below:
\arg TIMER_CH_0: TIMER channel 0(TIMERx(x=0~4,7,14~16,22,23,40~44))
\arg TIMER_CH_1: TIMER channel 1(TIMERx(x=0~4,7,14,22,23,40~44))
\arg TIMER_CH_2: TIMER channel 2(TIMERx(x=0~4,7,22,23))
\arg TIMER_CH_3: TIMER channel 3(TIMERx(x=0~4,7,22,23))
\param[in] ocnpolarity: channel complementary output polarity
only one parameter can be selected which is shown as below:
\arg TIMER_OCN_POLARITY_HIGH: channel complementary output polarity is high
\arg TIMER_OCN_POLARITY_LOW: channel complementary output polarity is low
\param[out] none
\retval none
*/
void timer_channel_complementary_output_polarity_config(uint32_t timer_periph, uint16_t channel, uint16_t ocnpolarity)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x002DU), ERR_PERIPH);
} else if(NOT_TIMER_CHANNEL(channel)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x002DU), ERR_PARAM_INVALID);
} else if(NOT_TIMER_OCNPOLARITY(ocnpolarity)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x002DU), ERR_PARAM_INVALID);
} else
#endif /* FW_DEBUG_ERR_REPORT */
{
switch(channel) {
/* configure TIMER_CH_0 */
case TIMER_CH_0:
TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_MCH0P);
TIMER_CHCTL2(timer_periph) |= (uint32_t)ocnpolarity;
break;
/* configure TIMER_CH_1 */
case TIMER_CH_1:
TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_MCH1P);
TIMER_CHCTL2(timer_periph) |= ((uint32_t)ocnpolarity << 4U);
break;
/* configure TIMER_CH_2 */
case TIMER_CH_2:
TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_MCH2P);
TIMER_CHCTL2(timer_periph) |= ((uint32_t)ocnpolarity << 8U);
break;
/* configure TIMER_CH_3 */
case TIMER_CH_3:
TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_MCH3P);
TIMER_CHCTL2(timer_periph) |= ((uint32_t)ocnpolarity << 12U);
break;
default:
break;
}
}
}
/*!
\brief configure TIMER channel enable state
\param[in] timer_periph: TIMERx(x=0~4,7,14~16,22,23,40~44)
\param[in] channel: TIMER channel
only one parameter can be selected which is shown as below:
\arg TIMER_CH_0: TIMER channel 0(TIMERx(x=0~4,7,14~16,22,23,40~44))
\arg TIMER_CH_1: TIMER channel 1(TIMERx(x=0~4,7,14,22,23,40~44))
\arg TIMER_CH_2: TIMER channel 2(TIMERx(x=0~4,7,22,23))
\arg TIMER_CH_3: TIMER channel 3(TIMERx(x=0~4,7,22,23))
\arg TIMER_MCH_0: TIMER multi mode channel 0(TIMERx(x=0,7,14~16,40~44))
\arg TIMER_MCH_1: TIMER multi mode channel 1(TIMERx(x=0,7))
\arg TIMER_MCH_2: TIMER multi mode channel 2(TIMERx(x=0,7))
\arg TIMER_MCH_3: TIMER multi mode channel 3(TIMERx(x=0,7))
\param[in] state: TIMER channel enable state
only one parameter can be selected which is shown as below:
\arg TIMER_CCX_ENABLE: channel enable
\arg TIMER_CCX_DISABLE: channel disable
\arg TIMER_MCCX_ENABLE: multi mode channel enable
\arg TIMER_MCCX_DISABLE: multi mode channel disable
\param[out] none
\retval none
*/
void timer_channel_output_state_config(uint32_t timer_periph, uint16_t channel, uint32_t state)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x002EU), ERR_PERIPH);
} else if(NOT_TIMER_ALL_CHANNEL(channel)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x002EU), ERR_PARAM_INVALID);
} else if(NOT_TIMER_CHANNEL_STATE(state)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x002EU), ERR_PARAM_INVALID);
} else
#endif /* FW_DEBUG_ERR_REPORT */
{
switch(channel) {
/* configure TIMER_CH_0 */
case TIMER_CH_0:
TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_CH0EN);
TIMER_CHCTL2(timer_periph) |= (uint32_t)state;
break;
/* configure TIMER_CH_1 */
case TIMER_CH_1:
TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_CH1EN);
TIMER_CHCTL2(timer_periph) |= ((uint32_t)state << 4U);
break;
/* configure TIMER_CH_2 */
case TIMER_CH_2:
TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_CH2EN);
TIMER_CHCTL2(timer_periph) |= ((uint32_t)state << 8U);
break;
/* configure TIMER_CH_3 */
case TIMER_CH_3:
TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_CH3EN);
TIMER_CHCTL2(timer_periph) |= ((uint32_t)state << 12U);
break;
/* configure TIMER_MCH_0 */
case TIMER_MCH_0:
TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_MCH0EN);
TIMER_CHCTL2(timer_periph) |= (uint32_t)((uint32_t)state);
break;
/* configure TIMER_MCH_1 */
case TIMER_MCH_1:
TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_MCH1EN);
TIMER_CHCTL2(timer_periph) |= ((uint32_t)(state << 4U));
break;
/* configure TIMER_MCH_2 */
case TIMER_MCH_2:
TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_MCH2EN);
TIMER_CHCTL2(timer_periph) |= (uint32_t)((uint32_t)(state << 8U));
break;
/* configure TIMER_MCH_3 */
case TIMER_MCH_3:
TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_MCH3EN);
TIMER_CHCTL2(timer_periph) |= ((uint32_t)(state << 12U));
break;
default:
break;
}
}
}
/*!
\brief configure TIMER channel complementary output enable state
\param[in] timer_periph: TIMERx(x=0,7,14~16,40~44)
\param[in] channel: TIMER channel
only one parameter can be selected which is shown as below:
\arg TIMER_CH_0: TIMER channel 0(TIMERx(x=0,7,14~16,40~44))
\arg TIMER_CH_1: TIMER channel 1(TIMERx(x=0,7,14,40~44))
\arg TIMER_CH_2: TIMER channel 2(TIMERx(x=0,7))
\arg TIMER_CH_3: TIMER channel 3(TIMERx(x=0,7))
\param[in] ocnstate: TIMER channel complementary output enable state
only one parameter can be selected which is shown as below:
\arg TIMER_CCXN_ENABLE: channel complementary enable
\arg TIMER_CCXN_DISABLE: channel complementary disable
\param[out] none
\retval none
*/
void timer_channel_complementary_output_state_config(uint32_t timer_periph, uint16_t channel, uint16_t ocnstate)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x002FU), ERR_PERIPH);
} else if(NOT_TIMER_CHANNEL(channel)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x002FU), ERR_PARAM_INVALID);
} else if(NOT_TIMER_OUTPUTNSTATE(ocnstate)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x002FU), ERR_PARAM_INVALID);
} else
#endif
{
switch(channel) {
/* configure TIMER_CH_0 */
case TIMER_CH_0:
TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_MCH0EN);
TIMER_CHCTL2(timer_periph) |= (uint32_t)ocnstate;
break;
/* configure TIMER_CH_1 */
case TIMER_CH_1:
TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_MCH1EN);
TIMER_CHCTL2(timer_periph) |= ((uint32_t)ocnstate << 4U);
break;
/* configure TIMER_CH_2 */
case TIMER_CH_2:
TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_MCH2EN);
TIMER_CHCTL2(timer_periph) |= ((uint32_t)ocnstate << 8U);
break;
/* configure TIMER_CH_3 */
case TIMER_CH_3:
TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_MCH3EN);
TIMER_CHCTL2(timer_periph) |= ((uint32_t)ocnstate << 12U);
break;
default:
break;
}
}
}
/*!
\brief initialize TIMER channel input parameter struct with a default value
\param[in] icpara: TIMER channel input parameter struct
\param[out] none
\retval none
*/
void timer_channel_input_struct_para_init(timer_ic_parameter_struct *icpara)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_VALID_POINTER(icpara)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0030U), ERR_PARAM_POINTER);
} else
#endif /* FW_DEBUG_ERR_REPORT */
{
/* initialize the channel input parameter struct member with the default value */
icpara->icpolarity = TIMER_IC_POLARITY_RISING;
icpara->icselection = TIMER_IC_SELECTION_DIRECTTI;
icpara->icprescaler = TIMER_IC_PSC_DIV1;
icpara->icfilter = 0U;
}
}
/*!
\brief configure TIMER input capture parameter
\param[in] timer_periph: TIMERx(x=0~4,7,14~16,22,23,40~44)
\param[in] channel: TIMER channel
only one parameter can be selected which is shown as below:
\arg TIMER_CH_0: TIMER channel 0(TIMERx(x=0~4,7,14~16,22,23,40~44))
\arg TIMER_CH_1: TIMER channel 1(TIMERx(x=0~4,7,14,22,23,40~44))
\arg TIMER_CH_2: TIMER channel 2(TIMERx(x=0~4,7,22,23))
\arg TIMER_CH_3: TIMER channel 3(TIMERx(x=0~4,7,22,23))
\arg TIMER_MCH_0: TIMER multi mode channel 0(TIMERx(x=0,7,14~16,40~44))
\arg TIMER_MCH_1: TIMER multi mode channel 1(TIMERx(x=0,7))
\arg TIMER_MCH_2: TIMER multi mode channel 2(TIMERx(x=0,7))
\arg TIMER_MCH_3: TIMER multi mode channel 3(TIMERx(x=0,7))
\param[in] icpara: TIMER channel input parameter struct
icpolarity: TIMER_IC_POLARITY_RISING, TIMER_IC_POLARITY_FALLING, TIMER_IC_POLARITY_BOTH_EDGE
icselection: TIMER_IC_SELECTION_DIRECTTI, TIMER_IC_SELECTION_INDIRECTTI, TIMER_IC_SELECTION_ITS, TIMER_IC_SELECTION_PAIR
icprescaler: TIMER_IC_PSC_DIV1, TIMER_IC_PSC_DIV2, TIMER_IC_PSC_DIV4, TIMER_IC_PSC_DIV8
icfilter: 0~15
\param[out] none
\retval none
*/
void timer_input_capture_config(uint32_t timer_periph, uint16_t channel, timer_ic_parameter_struct *icpara)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0031U), ERR_PERIPH);
} else if(NOT_TIMER_ALL_CHANNEL(channel)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0031U), ERR_PARAM_POINTER);
} else if(NOT_VALID_POINTER(icpara)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0031U), ERR_PARAM_POINTER);
} else
#endif /* FW_DEBUG_ERR_REPORT */
{
switch(channel) {
/* configure TIMER_CH_0 */
case TIMER_CH_0:
/* reset the CH0EN bit */
TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_CH0EN);
/* reset the CH0P and MCH0P bits */
TIMER_CHCTL2(timer_periph) &= (~(uint32_t)(TIMER_CHCTL2_CH0P | TIMER_CHCTL2_MCH0P));
TIMER_CHCTL2(timer_periph) |= (uint32_t)(icpara->icpolarity);
/* reset the CH0MS bit */
TIMER_CHCTL0(timer_periph) &= (~(uint32_t)TIMER_CHCTL0_CH0MS);
if(TIMER_IC_SELECTION_PAIR == icpara->icselection) {
TIMER_CHCTL0(timer_periph) |= (uint32_t)icpara->icselection << 28U;
} else {
TIMER_CHCTL0(timer_periph) |= ((uint32_t)icpara->icselection);
}
/* reset the CH0CAPFLT bit */
TIMER_CHCTL0(timer_periph) &= (~(uint32_t)TIMER_CHCTL0_CH0CAPFLT);
TIMER_CHCTL0(timer_periph) |= ((uint32_t)(icpara->icfilter) << 4U);
/* set the CH0EN bit */
TIMER_CHCTL2(timer_periph) |= (uint32_t)TIMER_CHCTL2_CH0EN;
break;
/* configure TIMER_CH_1 */
case TIMER_CH_1:
/* reset the CH1EN bit */
TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_CH1EN);
/* reset the CH1P and MCH1P bits */
TIMER_CHCTL2(timer_periph) &= (~(uint32_t)(TIMER_CHCTL2_CH1P | TIMER_CHCTL2_MCH1P));
TIMER_CHCTL2(timer_periph) |= ((uint32_t)(icpara->icpolarity) << 4U);
/* reset the CH1MS bit */
TIMER_CHCTL0(timer_periph) &= (~(uint32_t)TIMER_CHCTL0_CH1MS);
if(TIMER_IC_SELECTION_PAIR == icpara->icselection) {
TIMER_CHCTL0(timer_periph) |= ((uint32_t)icpara->icselection) << 29U;
} else {
TIMER_CHCTL0(timer_periph) |= (uint32_t)(icpara->icselection) << 8U;
}
/* reset the CH1CAPFLT bit */
TIMER_CHCTL0(timer_periph) &= (~(uint32_t)TIMER_CHCTL0_CH1CAPFLT);
TIMER_CHCTL0(timer_periph) |= ((uint32_t)(icpara->icfilter) << 12U);
/* set the CH1EN bit */
TIMER_CHCTL2(timer_periph) |= (uint32_t)TIMER_CHCTL2_CH1EN;
break;
/* configure TIMER_CH_2 */
case TIMER_CH_2:
/* reset the CH2EN bit */
TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_CH2EN);
/* reset the CH2P and MCH2P bits */
TIMER_CHCTL2(timer_periph) &= (~(uint32_t)(TIMER_CHCTL2_CH2P | TIMER_CHCTL2_MCH2P));
TIMER_CHCTL2(timer_periph) |= ((uint32_t)(icpara->icpolarity) << 8U);
/* reset the CH2MS bit */
TIMER_CHCTL1(timer_periph) &= (~(uint32_t)TIMER_CHCTL1_CH2MS);
if(TIMER_IC_SELECTION_PAIR == icpara->icselection) {
TIMER_CHCTL1(timer_periph) |= ((uint32_t)icpara->icselection << 28U);
} else {
TIMER_CHCTL1(timer_periph) |= ((uint32_t)(icpara->icselection));
}
/* reset the CH2CAPFLT bit */
TIMER_CHCTL1(timer_periph) &= (~(uint32_t)TIMER_CHCTL1_CH2CAPFLT);
TIMER_CHCTL1(timer_periph) |= ((uint32_t)(icpara->icfilter) << 4U);
/* set the CH2EN bit */
TIMER_CHCTL2(timer_periph) |= (uint32_t)TIMER_CHCTL2_CH2EN;
break;
/* configure TIMER_CH_3 */
case TIMER_CH_3:
/* reset the CH3EN bit */
TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_CH3EN);
/* reset the CH3P bits */
TIMER_CHCTL2(timer_periph) &= (~(uint32_t)(TIMER_CHCTL2_CH3P | TIMER_CHCTL2_MCH3P));
TIMER_CHCTL2(timer_periph) |= ((uint32_t)(icpara->icpolarity) << 12U);
/* reset the CH3MS bit */
TIMER_CHCTL1(timer_periph) &= (~(uint32_t)TIMER_CHCTL1_CH3MS);
if(TIMER_IC_SELECTION_PAIR == icpara->icselection) {
TIMER_CHCTL1(timer_periph) |= ((uint32_t)icpara->icselection << 29U);
} else {
TIMER_CHCTL1(timer_periph) |= ((uint32_t)(icpara->icselection) << 8U);
}
/* reset the CH3CAPFLT bit */
TIMER_CHCTL1(timer_periph) &= (~(uint32_t)TIMER_CHCTL1_CH3CAPFLT);
TIMER_CHCTL1(timer_periph) |= ((uint32_t)(icpara->icfilter) << 12U);
/* set the CH3EN bit */
TIMER_CHCTL2(timer_periph) |= (uint32_t)TIMER_CHCTL2_CH3EN;
break;
/* configure TIMER_MCH_0 */
case TIMER_MCH_0:
/* reset the MCH0EN bit */
TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_MCH0EN);
/* reset the MCH0FP bits */
TIMER_MCHCTL2(timer_periph) &= (~(uint32_t)(TIMER_MCHCTL2_MCH0FP));
switch(icpara->icpolarity) {
case TIMER_IC_POLARITY_RISING:
TIMER_MCHCTL2(timer_periph) |= TIMER_IMC_POLARITY_RISING;
break;
case TIMER_IC_POLARITY_FALLING:
TIMER_MCHCTL2(timer_periph) |= TIMER_IMC_POLARITY_FALLING;
break;
case TIMER_IC_POLARITY_BOTH_EDGE:
TIMER_MCHCTL2(timer_periph) |= TIMER_IMC_POLARITY_BOTH_EDGE;
break;
default:
break;
}
/* reset the MCH0MS bit */
TIMER_MCHCTL0(timer_periph) &= (~(uint32_t)TIMER_MCHCTL0_MCH0MS);
if(TIMER_IC_SELECTION_PAIR == icpara->icselection) {
TIMER_MCHCTL0(timer_periph) |= ((uint32_t)icpara->icselection << 28U);
} else {
TIMER_MCHCTL0(timer_periph) |= (uint32_t)(icpara->icselection);
}
/* reset the MCH0CAPFLT bit */
TIMER_MCHCTL0(timer_periph) &= (~(uint32_t)TIMER_MCHCTL0_MCH0CAPFLT);
TIMER_MCHCTL0(timer_periph) |= ((uint32_t)(icpara->icfilter) << 4U);
/* set the MCH0EN bit */
TIMER_CHCTL2(timer_periph) |= (uint32_t)TIMER_CHCTL2_MCH0EN;
break;
/* configure TIMER_MCH_1 */
case TIMER_MCH_1:
/* reset the MCH1EN bit */
TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_MCH1EN);
/* reset the MCH1FP bits */
TIMER_MCHCTL2(timer_periph) &= (~(uint32_t)(TIMER_MCHCTL2_MCH1FP));
switch(icpara->icpolarity) {
case TIMER_IC_POLARITY_RISING:
TIMER_MCHCTL2(timer_periph) |= (uint32_t)TIMER_IMC_POLARITY_RISING << 2U;
break;
case TIMER_IC_POLARITY_FALLING:
TIMER_MCHCTL2(timer_periph) |= (uint32_t)TIMER_IMC_POLARITY_FALLING << 2U;
break;
case TIMER_IC_POLARITY_BOTH_EDGE:
TIMER_MCHCTL2(timer_periph) |= (uint32_t)TIMER_IMC_POLARITY_BOTH_EDGE << 2U;
break;
default:
break;
}
/* reset the MCH1MS bit */
TIMER_MCHCTL0(timer_periph) &= (~(uint32_t)TIMER_MCHCTL0_MCH1MS);
if(TIMER_IC_SELECTION_PAIR == icpara->icselection) {
TIMER_MCHCTL0(timer_periph) |= ((uint32_t)icpara->icselection << 29U);
} else {
TIMER_MCHCTL0(timer_periph) |= ((uint32_t)(icpara->icselection) << 8U);
}
/* reset the MCH1CAPFLT bit */
TIMER_MCHCTL0(timer_periph) &= (~(uint32_t)TIMER_MCHCTL0_MCH1CAPFLT);
TIMER_MCHCTL0(timer_periph) |= ((uint32_t)(icpara->icfilter) << 12U);
/* set the MCH1EN bit */
TIMER_CHCTL2(timer_periph) |= (uint32_t)TIMER_CHCTL2_MCH1EN;
break;
/* configure TIMER_MCH_2 */
case TIMER_MCH_2:
/* reset the MCH2EN bit */
TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_MCH2EN);
/* reset the MCH2FP bits */
TIMER_MCHCTL2(timer_periph) &= (~(uint32_t)(TIMER_MCHCTL2_MCH2FP));
switch(icpara->icpolarity) {
case TIMER_IC_POLARITY_RISING:
TIMER_MCHCTL2(timer_periph) |= (uint32_t)TIMER_IMC_POLARITY_RISING << 4U;
break;
case TIMER_IC_POLARITY_FALLING:
TIMER_MCHCTL2(timer_periph) |= (uint32_t)TIMER_IMC_POLARITY_FALLING << 4U;
break;
case TIMER_IC_POLARITY_BOTH_EDGE:
TIMER_MCHCTL2(timer_periph) |= (uint32_t)TIMER_IMC_POLARITY_BOTH_EDGE << 4U;
break;
default:
break;
}
/* reset the MCH2MS bit */
TIMER_MCHCTL1(timer_periph) &= (~(uint32_t)TIMER_MCHCTL1_MCH2MS);
if(TIMER_IC_SELECTION_PAIR == icpara->icselection) {
TIMER_MCHCTL1(timer_periph) |= ((uint32_t)icpara->icselection << 28U);
} else {
TIMER_MCHCTL1(timer_periph) |= ((uint32_t)(icpara->icselection));
}
/* reset the MCH2CAPFLT bit */
TIMER_MCHCTL1(timer_periph) &= (~(uint32_t)TIMER_MCHCTL1_MCH2CAPFLT);
TIMER_MCHCTL1(timer_periph) |= ((uint32_t)(icpara->icfilter) << 4U);
/* set the MCH2EN bit */
TIMER_CHCTL2(timer_periph) |= (uint32_t)TIMER_CHCTL2_MCH2EN;
break;
/* configure TIMER_MCH_3 */
case TIMER_MCH_3:
/* reset the MCH3EN bit */
TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_MCH3EN);
/* reset the MCH3FP bits */
TIMER_MCHCTL2(timer_periph) &= (~(uint32_t)(TIMER_MCHCTL2_MCH3FP));
switch(icpara->icpolarity) {
case TIMER_IC_POLARITY_RISING:
TIMER_MCHCTL2(timer_periph) |= (uint32_t)TIMER_IMC_POLARITY_RISING << 6U;
break;
case TIMER_IC_POLARITY_FALLING:
TIMER_MCHCTL2(timer_periph) |= (uint32_t)TIMER_IMC_POLARITY_FALLING << 6U;
break;
case TIMER_IC_POLARITY_BOTH_EDGE:
TIMER_MCHCTL2(timer_periph) |= (uint32_t)TIMER_IMC_POLARITY_BOTH_EDGE << 6U;
break;
default:
break;
}
/* reset the MCH3MS bit */
TIMER_MCHCTL1(timer_periph) &= (~(uint32_t)TIMER_MCHCTL1_MCH3MS);
if(TIMER_IC_SELECTION_PAIR == icpara->icselection) {
TIMER_MCHCTL1(timer_periph) |= ((uint32_t)icpara->icselection << 29U);
} else {
TIMER_MCHCTL1(timer_periph) |= ((uint32_t)(icpara->icselection) << 8U);
}
/* reset the MCH3CAPFLT bit */
TIMER_MCHCTL1(timer_periph) &= (~(uint32_t)TIMER_MCHCTL1_MCH3CAPFLT);
TIMER_MCHCTL1(timer_periph) |= ((uint32_t)(icpara->icfilter) << 12U);
/* set the MCH3EN bit */
TIMER_CHCTL2(timer_periph) |= (uint32_t)TIMER_CHCTL2_MCH3EN;
break;
default:
break;
}
/* configure TIMER channel input capture prescaler value */
timer_channel_input_capture_prescaler_config(timer_periph, channel, (uint16_t)(icpara->icprescaler));
}
}
/*!
\brief configure TIMER channel input capture prescaler value
\param[in] timer_periph: TIMERx(x=0~4,7,14~16,22,23,40~44)
\param[in] channel: TIMER channel
only one parameter can be selected which is shown as below:
\arg TIMER_CH_0: TIMER channel 0(TIMERx(x=0~4,7,14~16,22,23,40~44))
\arg TIMER_CH_1: TIMER channel 1(TIMERx(x=0~4,7,14,22,23,40~44))
\arg TIMER_CH_2: TIMER channel 2(TIMERx(x=0~4,7,22,23))
\arg TIMER_CH_3: TIMER channel 3(TIMERx(x=0~4,7,22,23))
\arg TIMER_MCH_0: TIMER multi mode channel 0(TIMERx(x=0,7,14~16,40~44))
\arg TIMER_MCH_1: TIMER multi mode channel 1(TIMERx(x=0,7))
\arg TIMER_MCH_2: TIMER multi mode channel 2(TIMERx(x=0,7))
\arg TIMER_MCH_3: TIMER multi mode channel 3(TIMERx(x=0,7))
\param[in] prescaler: channel input capture prescaler value
only one parameter can be selected which is shown as below:
\arg TIMER_IC_PSC_DIV1: no prescaler
\arg TIMER_IC_PSC_DIV2: divided by 2
\arg TIMER_IC_PSC_DIV4: divided by 4
\arg TIMER_IC_PSC_DIV8: divided by 8
\param[out] none
\retval none
*/
void timer_channel_input_capture_prescaler_config(uint32_t timer_periph, uint16_t channel, uint16_t prescaler)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0032U), ERR_PERIPH);
} else if(NOT_TIMER_ALL_CHANNEL(channel)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0032U), ERR_PARAM_INVALID);
} else if(NOT_TIMER_ICPRESCALER(prescaler)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0032U), ERR_PARAM_INVALID);
} else
#endif /* FW_DEBUG_ERR_REPORT */
{
switch(channel) {
/* configure TIMER_CH_0 */
case TIMER_CH_0:
TIMER_CHCTL0(timer_periph) &= (~(uint32_t)TIMER_CHCTL0_CH0CAPPSC);
TIMER_CHCTL0(timer_periph) |= (uint32_t)prescaler;
break;
/* configure TIMER_CH_1 */
case TIMER_CH_1:
TIMER_CHCTL0(timer_periph) &= (~(uint32_t)TIMER_CHCTL0_CH1CAPPSC);
TIMER_CHCTL0(timer_periph) |= ((uint32_t)prescaler << 8U);
break;
/* configure TIMER_CH_2 */
case TIMER_CH_2:
TIMER_CHCTL1(timer_periph) &= (~(uint32_t)TIMER_CHCTL1_CH2CAPPSC);
TIMER_CHCTL1(timer_periph) |= (uint32_t)prescaler;
break;
/* configure TIMER_CH_3 */
case TIMER_CH_3:
TIMER_CHCTL1(timer_periph) &= (~(uint32_t)TIMER_CHCTL1_CH3CAPPSC);
TIMER_CHCTL1(timer_periph) |= ((uint32_t)prescaler << 8U);
break;
/* configure TIMER_MCH_0 */
case TIMER_MCH_0:
TIMER_MCHCTL0(timer_periph) &= (~(uint32_t)TIMER_MCHCTL0_MCH0CAPPSC);
TIMER_MCHCTL0(timer_periph) |= (uint32_t)prescaler;
break;
/* configure TIMER_MCH_1 */
case TIMER_MCH_1:
TIMER_MCHCTL0(timer_periph) &= (~(uint32_t)TIMER_MCHCTL0_MCH1CAPPSC);
TIMER_MCHCTL0(timer_periph) |= ((uint32_t)prescaler << 8U);
break;
/* configure TIMER_MCH_2 */
case TIMER_MCH_2:
TIMER_MCHCTL1(timer_periph) &= (~(uint32_t)TIMER_MCHCTL1_MCH2CAPPSC);
TIMER_MCHCTL1(timer_periph) |= (uint32_t)prescaler;
break;
/* configure TIMER_MCH_3 */
case TIMER_MCH_3:
TIMER_MCHCTL1(timer_periph) &= (~(uint32_t)TIMER_MCHCTL1_MCH3CAPPSC);
TIMER_MCHCTL1(timer_periph) |= ((uint32_t)prescaler << 8U);
break;
default:
break;
}
}
}
/*!
\brief read TIMER channel capture compare register value
\param[in] timer_periph: TIMERx(x=0~4,7,14~16,22,23,40~44)
\param[in] channel: TIMER channel
only one parameter can be selected which is shown as below:
\arg TIMER_CH_0: TIMER channel 0(TIMERx(x=0~4,7,14~16,22,23,40~44))
\arg TIMER_CH_1: TIMER channel 1(TIMERx(x=0~4,7,14,22,23,40~44))
\arg TIMER_CH_2: TIMER channel 2(TIMERx(x=0~4,7,22,23))
\arg TIMER_CH_3: TIMER channel 3(TIMERx(x=0~4,7,22,23))
\arg TIMER_MCH_0: TIMER multi mode channel 0(TIMERx(x=0,7,14~16,40~44))
\arg TIMER_MCH_1: TIMER multi mode channel 1(TIMERx(x=0,7))
\arg TIMER_MCH_2: TIMER multi mode channel 2(TIMERx(x=0,7))
\arg TIMER_MCH_3: TIMER multi mode channel 3(TIMERx(x=0,7))
\param[out] none
\retval channel capture compare register value, 0~0xFFFFFFFF
*/
uint32_t timer_channel_capture_value_register_read(uint32_t timer_periph, uint16_t channel)
{
uint32_t count_value = 0U;
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0033U), ERR_PERIPH);
} else if(NOT_TIMER_ALL_CHANNEL(channel)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0033U), ERR_PARAM_INVALID);
} else
#endif /* FW_DEBUG_ERR_REPORT */
{
switch(channel) {
case TIMER_CH_0:
/* read TIMER_CH_0 capture compare register value */
count_value = TIMER_CH0CV(timer_periph);
break;
case TIMER_CH_1:
/* read TIMER_CH_1 capture compare register value */
count_value = TIMER_CH1CV(timer_periph);
break;
case TIMER_CH_2:
/* read TIMER_CH_2 capture compare register value */
count_value = TIMER_CH2CV(timer_periph);
break;
case TIMER_CH_3:
/* read TIMER_CH_3 capture compare register value */
count_value = TIMER_CH3CV(timer_periph);
break;
case TIMER_MCH_0:
/* read TIMER_MCH_0 capture compare register value */
count_value = TIMER_MCH0CV(timer_periph);
break;
case TIMER_MCH_1:
/* read TIMER_MCH_1 capture compare register value */
count_value = TIMER_MCH1CV(timer_periph);
break;
case TIMER_MCH_2:
/* read TIMER_MCH_2 capture compare register value */
count_value = TIMER_MCH2CV(timer_periph);
break;
case TIMER_MCH_3:
/* read TIMER_MCH_3 capture compare register value */
count_value = TIMER_MCH3CV(timer_periph);
break;
default:
break;
}
}
return (count_value);
}
/*!
\brief configure TIMER input pwm capture function
\param[in] timer_periph: TIMERx(x=0~4,7,14,22,23,40~44)
\param[in] channel: TIMER channel
only one parameter can be selected which is shown as below:
\arg TIMER_CH_0: TIMER channel 0
\arg TIMER_CH_1: TIMER channel 1
\param[in] icpwm: TIMER channel input pwm parameter struct
icpolarity: TIMER_IC_POLARITY_RISING, TIMER_IC_POLARITY_FALLING
icselection: TIMER_IC_SELECTION_DIRECTTI, TIMER_IC_SELECTION_INDIRECTTI
icprescaler: TIMER_IC_PSC_DIV1, TIMER_IC_PSC_DIV2, TIMER_IC_PSC_DIV4, TIMER_IC_PSC_DIV8
icfilter: 0~15
\param[out] none
\retval none
*/
void timer_input_pwm_capture_config(uint32_t timer_periph, uint16_t channel, timer_ic_parameter_struct *icpwm)
{
uint16_t icpolarity = 0U;
uint16_t icselection = 0U;
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0034U), ERR_PERIPH);
} else if(NOT_TIMER_CHANNEL(channel)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0034U), ERR_PARAM_INVALID);
} else if(NOT_VALID_POINTER(icpwm)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0034U), ERR_PARAM_POINTER);
} else
#endif /* FW_DEBUG_ERR_REPORT */
{
/* set channel input polarity */
if(TIMER_IC_POLARITY_RISING == icpwm->icpolarity) {
icpolarity = TIMER_IC_POLARITY_FALLING;
} else {
icpolarity = TIMER_IC_POLARITY_RISING;
}
/* set channel input mode selection */
if(TIMER_IC_SELECTION_DIRECTTI == icpwm->icselection) {
icselection = TIMER_IC_SELECTION_INDIRECTTI;
} else {
icselection = TIMER_IC_SELECTION_DIRECTTI;
}
if(TIMER_CH_0 == channel) {
/* reset the CH0EN bit */
TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_CH0EN);
/* reset the CH0P and MCH0P bits */
TIMER_CHCTL2(timer_periph) &= (~(uint32_t)(TIMER_CHCTL2_CH0P | TIMER_CHCTL2_MCH0P));
/* set the CH0P and MCH0P bits */
TIMER_CHCTL2(timer_periph) |= (uint32_t)(icpwm->icpolarity);
/* reset the CH0MS bit */
TIMER_CHCTL0(timer_periph) &= (~(uint32_t)TIMER_CHCTL0_CH0MS);
/* set the CH0MS bit */
TIMER_CHCTL0(timer_periph) |= (uint32_t)(icpwm->icselection);
/* reset the CH0CAPFLT bit */
TIMER_CHCTL0(timer_periph) &= (~(uint32_t)TIMER_CHCTL0_CH0CAPFLT);
/* set the CH0CAPFLT bit */
TIMER_CHCTL0(timer_periph) |= ((uint32_t)(icpwm->icfilter) << 4U);
/* set the CH0EN bit */
TIMER_CHCTL2(timer_periph) |= (uint32_t)TIMER_CHCTL2_CH0EN;
/* configure TIMER channel input capture prescaler value */
timer_channel_input_capture_prescaler_config(timer_periph, TIMER_CH_0, (uint16_t)(icpwm->icprescaler));
/* reset the CH1EN bit */
TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_CH1EN);
/* reset the CH1P and MCH1P bits */
TIMER_CHCTL2(timer_periph) &= (~(uint32_t)(TIMER_CHCTL2_CH1P | TIMER_CHCTL2_MCH1P));
/* set the CH1P and MCH1P bits */
TIMER_CHCTL2(timer_periph) |= ((uint32_t)icpolarity << 4U);
/* reset the CH1MS bit */
TIMER_CHCTL0(timer_periph) &= (~(uint32_t)TIMER_CHCTL0_CH1MS);
/* set the CH1MS bit */
TIMER_CHCTL0(timer_periph) |= ((uint32_t)icselection << 8U);
/* reset the CH1CAPFLT bit */
TIMER_CHCTL0(timer_periph) &= (~(uint32_t)TIMER_CHCTL0_CH1CAPFLT);
/* set the CH1CAPFLT bit */
TIMER_CHCTL0(timer_periph) |= ((uint32_t)(icpwm->icfilter) << 12U);
/* set the CH1EN bit */
TIMER_CHCTL2(timer_periph) |= (uint32_t)TIMER_CHCTL2_CH1EN;
/* configure TIMER channel input capture prescaler value */
timer_channel_input_capture_prescaler_config(timer_periph, TIMER_CH_1, (uint16_t)(icpwm->icprescaler));
} else {
/* reset the CH1EN bit */
TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_CH1EN);
/* reset the CH1P and MCH1P bits */
TIMER_CHCTL2(timer_periph) &= (~(uint32_t)(TIMER_CHCTL2_CH1P | TIMER_CHCTL2_MCH1P));
/* set the CH1P and MCH1P bits */
TIMER_CHCTL2(timer_periph) |= ((uint32_t)(icpwm->icpolarity) << 4U);
/* reset the CH1MS bit */
TIMER_CHCTL0(timer_periph) &= (~(uint32_t)TIMER_CHCTL0_CH1MS);
/* set the CH1MS bit */
TIMER_CHCTL0(timer_periph) |= ((uint32_t)(icpwm->icselection) << 8U);
/* reset the CH1CAPFLT bit */
TIMER_CHCTL0(timer_periph) &= (~(uint32_t)TIMER_CHCTL0_CH1CAPFLT);
/* set the CH1CAPFLT bit */
TIMER_CHCTL0(timer_periph) |= ((uint32_t)(icpwm->icfilter) << 12U);
/* set the CH1EN bit */
TIMER_CHCTL2(timer_periph) |= (uint32_t)TIMER_CHCTL2_CH1EN;
/* configure TIMER channel input capture prescaler value */
timer_channel_input_capture_prescaler_config(timer_periph, TIMER_CH_1, (uint16_t)(icpwm->icprescaler));
/* reset the CH0EN bit */
TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_CH0EN);
/* reset the CH0P and MCH0P bits */
TIMER_CHCTL2(timer_periph) &= (~(uint32_t)(TIMER_CHCTL2_CH0P | TIMER_CHCTL2_MCH0P));
/* set the CH0P and MCH0P bits */
TIMER_CHCTL2(timer_periph) |= (uint32_t)icpolarity;
/* reset the CH0MS bit */
TIMER_CHCTL0(timer_periph) &= (~(uint32_t)TIMER_CHCTL0_CH0MS);
/* set the CH0MS bit */
TIMER_CHCTL0(timer_periph) |= (uint32_t)icselection;
/* reset the CH0CAPFLT bit */
TIMER_CHCTL0(timer_periph) &= (~(uint32_t)TIMER_CHCTL0_CH0CAPFLT);
/* set the CH0CAPFLT bit */
TIMER_CHCTL0(timer_periph) |= ((uint32_t)(icpwm->icfilter) << 4U);
/* set the CH0EN bit */
TIMER_CHCTL2(timer_periph) |= (uint32_t)TIMER_CHCTL2_CH0EN;
/* configure TIMER channel input capture prescaler value */
timer_channel_input_capture_prescaler_config(timer_periph, TIMER_CH_0, (uint16_t)(icpwm->icprescaler));
}
}
}
/*!
\brief configure TIMER hall sensor mode
\param[in] timer_periph: TIMERx(x=0~4,7,14,22,23,40~44)
\param[in] hallmode:
only one parameter can be selected which is shown as below:
\arg TIMER_HALLINTERFACE_ENABLE: TIMER hall sensor mode enable
\arg TIMER_HALLINTERFACE_DISABLE: TIMER hall sensor mode disable
\param[out] none
\retval none
*/
void timer_hall_mode_config(uint32_t timer_periph, uint32_t hallmode)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0035U), ERR_PERIPH);
} else if(NOT_TIMER_HALL_MODE(hallmode)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0035U), ERR_PARAM_INVALID);
} else
#endif /* FW_DEBUG_ERR_REPORT */
{
if(TIMER_HALLINTERFACE_ENABLE == hallmode) {
TIMER_CTL1(timer_periph) |= (uint32_t)TIMER_CTL1_TI0S;
} else if(TIMER_HALLINTERFACE_DISABLE == hallmode) {
TIMER_CTL1(timer_periph) &= (~(uint32_t)TIMER_CTL1_TI0S);
} else {
/* illegal parameters */
}
}
}
/*!
\brief initialize TIMER multi mode channel output parameter struct
\param[in] omcpara: TIMER multi mode channel output parameter struct
\param[out] none
\retval none
*/
void timer_multi_mode_channel_output_parameter_struct_init(timer_omc_parameter_struct *omcpara)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_VALID_POINTER(omcpara)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0036U), ERR_PARAM_POINTER);
} else
#endif /* FW_DEBUG_ERR_REPORT */
{
/* initialize the multi mode channel output parameter struct with the default value */
omcpara->outputmode = TIMER_MCH_MODE_COMPLEMENTARY;
omcpara->outputstate = TIMER_MCCX_DISABLE;
omcpara->ocpolarity = TIMER_OMC_POLARITY_LOW;
}
}
/*!
\brief configure TIMER multi mode channel output function
\param[in] timer_periph: TIMERx(x=0,7,14~16,40~44)
\param[in] channel: TIMER channel
only one parameter can be selected which is shown as below:
\arg TIMER_MCH_0: TIMER multi mode channel 0(TIMERx(x=0,7,14~16,40~44))
\arg TIMER_MCH_1: TIMER multi mode channel 1(TIMERx(x=0,7))
\arg TIMER_MCH_2: TIMER multi mode channel 2(TIMERx(x=0,7))
\arg TIMER_MCH_3: TIMER multi mode channel 3(TIMERx(x=0,7))
\param[in] omcpara: TIMER multi mode channel output parameter struct
outputmode: TIMER_MCH_MODE_INDEPENDENTLY, TIMER_MCH_MODE_COMPLEMENTARY
outputstate: TIMER_MCCX_ENABLE, TIMER_MCCX_DISABLE
ocpolarity: TIMER_OMC_POLARITY_HIGH, TIMER_OMC_POLARITY_LOW
\param[out] none
\retval none
*/
void timer_multi_mode_channel_output_config(uint32_t timer_periph, uint16_t channel, timer_omc_parameter_struct *omcpara)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0037U), ERR_PERIPH);
} else if(NOT_TIMER_MULTI_CHANNEL(channel)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0037U), ERR_PARAM_INVALID);
} else if(NOT_VALID_POINTER(omcpara)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0037U), ERR_PARAM_POINTER);
} else
#endif /* FW_DEBUG_ERR_REPORT */
{
switch(channel) {
/* configure TIMER_MCH_0 */
case TIMER_MCH_0:
TIMER_CTL2(timer_periph) &= (~(uint32_t)((uint32_t)TIMER_MCH_MODE_MASK << 20U));
TIMER_CTL2(timer_periph) |= (uint32_t)((uint32_t)(omcpara->outputmode) << 20U);
/* reset the MCH0EN bit */
TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_MCH0EN);
/* set the MCH0EN bit */
TIMER_CHCTL2(timer_periph) |= (uint32_t)(omcpara->outputstate);
/* reset the MCH0FP bit */
TIMER_MCHCTL2(timer_periph) &= (~(uint32_t)TIMER_MCHCTL2_MCH0FP);
/* set the MCH0FP bit */
TIMER_MCHCTL2(timer_periph) |= (uint32_t)omcpara->ocpolarity;
TIMER_MCHCTL0(timer_periph) &= (~(uint32_t)TIMER_MCHCTL0_MCH0MS);
break;
/* configure TIMER_MCH_1 */
case TIMER_MCH_1:
TIMER_CTL2(timer_periph) &= (~(uint32_t)((uint32_t)TIMER_MCH_MODE_MASK << 22U));
TIMER_CTL2(timer_periph) |= (uint32_t)((uint32_t)(omcpara->outputmode) << 22U);
/* reset the MCH1EN bit */
TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_MCH1EN);
/* set the MCH1EN bit */
TIMER_CHCTL2(timer_periph) |= (uint32_t)((uint32_t)(omcpara->outputstate) << 4U);
/* reset the MCH1FP bit */
TIMER_MCHCTL2(timer_periph) &= (~(uint32_t)TIMER_MCHCTL2_MCH1FP);
/* set the MCH1FP bit */
TIMER_MCHCTL2(timer_periph) |= (uint32_t)((uint32_t)(omcpara->ocpolarity) << 2U);
TIMER_MCHCTL0(timer_periph) &= (~(uint32_t)TIMER_MCHCTL0_MCH1MS);
break;
/* configure TIMER_MCH_2 */
case TIMER_MCH_2:
TIMER_CTL2(timer_periph) &= (~(uint32_t)((uint32_t)TIMER_MCH_MODE_MASK << 24U));
TIMER_CTL2(timer_periph) |= (uint32_t)((uint32_t)(omcpara->outputmode) << 24U);
/* reset the MCH2EN bit */
TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_MCH2EN);
/* set the MCH2EN bit */
TIMER_CHCTL2(timer_periph) |= (uint32_t)((uint32_t)(omcpara->outputstate) << 8U);
/* reset the MCH2FP bit */
TIMER_MCHCTL2(timer_periph) &= (~(uint32_t)TIMER_MCHCTL2_MCH2FP);
/* set the MCH2FP bit */
TIMER_MCHCTL2(timer_periph) |= (uint32_t)((uint32_t)(omcpara->ocpolarity) << 4U);
TIMER_MCHCTL1(timer_periph) &= (~(uint32_t)TIMER_MCHCTL1_MCH2MS);
break;
/* configure TIMER_MCH_3 */
case TIMER_MCH_3:
TIMER_CTL2(timer_periph) &= (~(uint32_t)((uint32_t)TIMER_MCH_MODE_MASK << 26U));
TIMER_CTL2(timer_periph) |= (uint32_t)((uint32_t)(omcpara->outputmode) << 26U);
/* reset the MCH3EN bit */
TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_MCH3EN);
/* set the MCH3EN bit */
TIMER_CHCTL2(timer_periph) |= (uint32_t)((uint32_t)(omcpara->outputstate) << 12U);
/* reset the MCH3FP bit */
TIMER_MCHCTL2(timer_periph) &= (~(uint32_t)TIMER_MCHCTL2_MCH3FP);
/* set the MCH3FP bit */
TIMER_MCHCTL2(timer_periph) |= (uint32_t)((uint32_t)(omcpara->ocpolarity) << 6U);
TIMER_MCHCTL1(timer_periph) &= (~(uint32_t)TIMER_MCHCTL1_MCH3MS);
break;
default:
break;
}
}
}
/*!
\brief multi mode channel mode select
\param[in] timer_periph: TIMERx(x=0,7,14~16,40~44)
\param[in] channel: TIMER channel
only one parameter can be selected which is shown as below:
\arg TIMER_MCH_0: TIMER multi mode channel 0(TIMERx(x=0,7,14~16,40~44))
\arg TIMER_MCH_1: TIMER multi mode channel 1(TIMERx(x=0,7))
\arg TIMER_MCH_2: TIMER multi mode channel 2(TIMERx(x=0,7))
\arg TIMER_MCH_3: TIMER multi mode channel 3(TIMERx(x=0,7))
\param[in] multi_mode_sel: multi mode channel mode selection
only one parameter can be selected which is shown as below:
\arg TIMER_MCH_MODE_INDEPENDENTLY: multi mode channel work in independently mode
\arg TIMER_MCH_MODE_COMPLEMENTARY: multi mode channel work in complementary output mode
\param[out] none
\retval none
*/
void timer_multi_mode_channel_mode_config(uint32_t timer_periph, uint32_t channel, uint32_t multi_mode_sel)
{
uint32_t reg;
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0038U), ERR_PERIPH);
} else if(NOT_TIMER_MULTI_CHANNEL(channel)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0038U), ERR_PARAM_INVALID);
} else if(NOT_TIMER_MULTI_MODE_CHANNEL_OUTPUT_MODE(multi_mode_sel)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0038U), ERR_PARAM_INVALID);
}else
#endif /* FW_DEBUG_ERR_REPORT */
{
reg = TIMER_CTL2(timer_periph);
reg &= (~(uint32_t)((uint32_t)TIMER_MCH_MODE_MASK << (((channel & 0xFU) << 1U) + 20U)));
reg |= (uint32_t)(multi_mode_sel << (((channel & 0xFU) << 1U) + 20U));
TIMER_CTL2(timer_periph) = reg;
}
}
/*!
\brief select TIMER input trigger source
\param[in] timer_periph: TIMERx(x=0~4,7,14,22,23,40~44)
\param[in] intrigger: input trigger source
only one parameter can be selected which is shown as below:
\arg TIMER_SMCFG_TRGSEL_NONE: event mode disable(TIMERx(x=0~4,7,14,22,23,40~44))
\arg TIMER_SMCFG_TRGSEL_ITI0: internal trigger 0(TIMERx(x=0~4,7,14,22,23,40~44))
\arg TIMER_SMCFG_TRGSEL_ITI1: internal trigger 1(TIMERx(x=0~4,7,14,22,23,40~44))
\arg TIMER_SMCFG_TRGSEL_ITI2: internal trigger 2(TIMERx(x=0~4,7,14,22,23,40~44))
\arg TIMER_SMCFG_TRGSEL_ITI3: internal trigger 3(TIMERx(x=0~4,7,14,22,23,40~44))
\arg TIMER_SMCFG_TRGSEL_CI0F_ED: TI0 edge detector(TIMERx(x=0~4,7,14,22,23,40~44))
\arg TIMER_SMCFG_TRGSEL_CI0FE0: filtered channel 0 input(TIMERx(x=0~4,7,14,22,23,40~44))
\arg TIMER_SMCFG_TRGSEL_CI1FE1: filtered channel 1 input(TIMERx(x=0~4,7,14,22,23,40~44))
\arg TIMER_SMCFG_TRGSEL_ETIFP: filtered external trigger input(TIMERx(x=0~4,7,22,23))
\arg TIMER_SMCFG_TRGSEL_CI2FE2: filtered channel 2 input(TIMERx(x=0,7))
\arg TIMER_SMCFG_TRGSEL_CI3FE3: filtered channel 3 input(TIMERx(x=0,7))
\arg TIMER_SMCFG_TRGSEL_MCI0FEM0: filtered multi mode channel 0 input(TIMERx(x=0,7,14,40~44))
\arg TIMER_SMCFG_TRGSEL_MCI1FEM1: filtered multi mode channel 1 input(TIMERx(x=0,7))
\arg TIMER_SMCFG_TRGSEL_MCI2FEM2: filtered multi mode channel 2 input(TIMERx(x=0,7))
\arg TIMER_SMCFG_TRGSEL_MCI3FEM3: filtered multi mode channel 3 input(TIMERx(x=0,7))
\arg TIMER_L0_SMCFG_TRGSEL_ITI4: internal trigger 4 for General-L0 timer(TIMERx(x=1,2,22,23))
\arg TIMER_L0_SMCFG_TRGSEL_ITI5: internal trigger 5 for General-L0 timer(TIMERx(x=1,22,23))
\arg TIMER_L0_SMCFG_TRGSEL_ITI7: internal trigger 7 for General-L0 timer(TIMERx(x=4))
\arg TIMER_L0_SMCFG_TRGSEL_ITI9: internal trigger 9 for General-L0 timer(TIMERx(x=22,23))
\arg TIMER_L0_SMCFG_TRGSEL_ITI10: internal trigger 10 for General-L0 timer(TIMERx(x=22,23))
\arg TIMER_L0_SMCFG_TRGSEL_ITI11: internal trigger 11 for General-L0 timer(TIMERx(x=22,23))
\arg TIMER_SMCFG_TRGSEL_ITI12: internal trigger 12(TIMERx(x=0~4,7,23))
\arg TIMER_SMCFG_TRGSEL_ITI13: internal trigger 13(TIMERx(x=0~4,7,22))
\arg TIMER_SMCFG_TRGSEL_ITI14: internal trigger 14(TIMERx(x=0~4,7,14,22,23,40~44))
\param[out] none
\retval none
*/
void timer_input_trigger_source_select(uint32_t timer_periph, uint32_t intrigger)
{
uint8_t TIMERx_temp = 0U;
uint32_t TIMERxCFG_temp = 0U;
volatile uint32_t *TIMERxCFG_addr;
uint8_t i = 0U;
uint32_t TIMERxCFG0_value, TIMERxCFG1_value, TIMERxCFG2_value;
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0039U), ERR_PERIPH);
} else if(NOT_TIMER_INPUT_TRIGGER_SOURCE(intrigger)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0039U), ERR_PARAM_INVALID);
} else
#endif /* FW_DEBUG_ERR_REPORT */
{
switch(timer_periph){
case TIMER0:
TIMERx_temp = SYSCFG_TIMER0;
break;
case TIMER1:
TIMERx_temp = SYSCFG_TIMER1;
break;
case TIMER2:
TIMERx_temp = SYSCFG_TIMER2;
break;
case TIMER3:
TIMERx_temp = SYSCFG_TIMER3;
break;
case TIMER4:
TIMERx_temp = SYSCFG_TIMER4;
break;
case TIMER7:
TIMERx_temp = SYSCFG_TIMER7;
break;
case TIMER14:
TIMERx_temp = SYSCFG_TIMER14;
break;
case TIMER22:
TIMERx_temp = SYSCFG_TIMER22;
break;
case TIMER23:
TIMERx_temp = SYSCFG_TIMER23;
break;
case TIMER40:
TIMERx_temp = SYSCFG_TIMER40;
break;
case TIMER41:
TIMERx_temp = SYSCFG_TIMER41;
break;
case TIMER42:
TIMERx_temp = SYSCFG_TIMER42;
break;
case TIMER43:
TIMERx_temp = SYSCFG_TIMER43;
break;
case TIMER44:
TIMERx_temp = SYSCFG_TIMER44;
break;
default:
break;
}
/* read SYSCFG_TIMERCFG0 register value */
TIMERxCFG0_value = SYSCFG_TIMERCFG0(TIMERx_temp) & 0x7FFF7FFFU;
/* read SYSCFG_TIMERCFG1 register value */
TIMERxCFG1_value = SYSCFG_TIMERCFG1(TIMERx_temp) & 0x001F7FFFU;
/* read SYSCFG_TIMERCFG2 register value */
TIMERxCFG2_value = SYSCFG_TIMERCFG2(TIMERx_temp) & 0x001F0000U;
if((0U == TIMERxCFG0_value)&&(0U == TIMERxCFG1_value)&&(0U == TIMERxCFG2_value)){
TIMERxCFG_temp = (BITS(16, 20) & ((uint32_t)(intrigger) << 16U));
TIMERxCFG_addr = &SYSCFG_TIMERCFG2(TIMERx_temp);
}else{
if((SYSCFG_TIMERCFG0(TIMERx_temp) & 0x7FFF7FFFU) != 0U){
for(i = 0U; i < 3U; i++){
if((SYSCFG_TIMERCFG0(TIMERx_temp) & (BITS(0,4) << (i * 5U))) != 0U){
TIMERxCFG_temp = ((BITS(0, 4)<< (i * 5U)) & ((uint32_t)(intrigger) << (i * 5U)));
break;
}
}
for(i = 3U; i < 6U; i++){
if((SYSCFG_TIMERCFG0(TIMERx_temp) & (BITS(0,4) << ((i * 5U)+1U))) != 0U){
TIMERxCFG_temp = ((BITS(0, 4)<< ((i * 5U)+1U)) & ((uint32_t)(intrigger) << ((i * 5U)+1U)));
break;
}
}
TIMERxCFG_addr = &SYSCFG_TIMERCFG0(TIMERx_temp);
}else if((SYSCFG_TIMERCFG1(TIMERx_temp) & 0x001F7FFFU) != 0U){
for(i = 6U; i < 10U; i++){
if(i < 9U){
if((SYSCFG_TIMERCFG1(TIMERx_temp) & (BITS(0,4) << ((i-6U)*5U))) != 0U){
TIMERxCFG_temp = ((BITS(0, 4)<< ((i-6U)*5U)) & ((uint32_t)(intrigger) << ((i-6U)*5U)));
break;
}
}else{
if((SYSCFG_TIMERCFG1(TIMERx_temp) & (BITS(0,4) << ((i-6U)*5U+1U))) != 0U){
TIMERxCFG_temp = ((BITS(0, 4)<< ((i-6U)*5U+1U)) & ((uint32_t)(intrigger) << ((i-6U)*5U+1U)));
}
}
}
TIMERxCFG_addr = &SYSCFG_TIMERCFG1(TIMERx_temp);
}else{
TIMERxCFG_temp = (BITS(16, 20) & ((uint32_t)(intrigger) << 16U));
TIMERxCFG_addr = &SYSCFG_TIMERCFG2(TIMERx_temp);
}
}
REG32(TIMERxCFG_addr) = TIMERxCFG_temp;
}
}
/*!
\brief select TIMER master mode output 0 trigger source
\param[in] timer_periph: TIMERx(x=0~7,14,22,23,50,51)
\param[in] outrigger: trigger output 0 source
only one parameter can be selected which is shown as below:
\arg TIMER_TRI_OUT0_SRC_RESET: the UPG bit as trigger output 0(TIMERx(x=0~7,14,22,23,50,51))
\arg TIMER_TRI_OUT0_SRC_ENABLE: the counter enable signal as trigger output 0(TIMERx(x=0~7,14,22,23,50,51))
\arg TIMER_TRI_OUT0_SRC_UPDATE: update event as trigger output 0(TIMERx(x=0~7,14,22,23,50,51))
\arg TIMER_TRI_OUT0_SRC_CH0: a capture or a compare match occurred in channel 0 as trigger output 0(TIMERx(x=0~4,7,14,22,23,40~44))
\arg TIMER_TRI_OUT0_SRC_O0CPRE: O0CPRE as trigger output 0(TIMERx(x=0~4,7,14,22,23,40~44))
\arg TIMER_TRI_OUT0_SRC_O1CPRE: O1CPRE as trigger output 0(TIMERx(x=0~4,7,14,22,23,40~44))
\arg TIMER_TRI_OUT0_SRC_O2CPRE: O2CPRE as trigger output 0(TIMERx(x=0~4,7,22,23))
\arg TIMER_TRI_OUT0_SRC_O3CPRE: O3CPRE as trigger output 0(TIMERx(x=0~4,7,22,23))
\param[out] none
\retval none
*/
void timer_master_output0_trigger_source_select(uint32_t timer_periph, uint32_t outrigger)
{
uint32_t reg;
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x003AU), ERR_PERIPH);
} else if(NOT_TIMER_OUTPUT0_TRIGGER_SOURCE(outrigger)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x003AU), ERR_PARAM_INVALID);
} else
#endif /* FW_DEBUG_ERR_REPORT */
{
reg = TIMER_CTL1(timer_periph);
reg &= (~(uint32_t)TIMER_CTL1_MMC0);
reg |= (uint32_t)outrigger;
TIMER_CTL1(timer_periph) = reg;
}
}
/*!
\brief select TIMER master mode output 1 trigger source
\param[in] timer_periph: TIMERx(x=0,7)
\param[in] outrigger: trigger output 1 source
only one parameter can be selected which is shown as below:
\arg TIMER_TRI_OUT1_SRC_RESET: the UPG bit as trigger output 1
\arg TIMER_TRI_OUT1_SRC_ENABLE: the counter enable signal TIMER_CTL0_CEN as trigger output 1
\arg TIMER_TRI_OUT1_SRC_UPDATE: update event as trigger output 1
\arg TIMER_TRI_OUT1_SRC_CH0: a capture or a compare match occurred in channel 0 as trigger output 1
\arg TIMER_TRI_OUT1_SRC_O0CPRE: O0CPRE as trigger output 1
\arg TIMER_TRI_OUT1_SRC_O1CPRE: O1CPRE as trigger output 1
\arg TIMER_TRI_OUT1_SRC_O2CPRE: O2CPRE as trigger output 1
\arg TIMER_TRI_OUT1_SRC_O3CPRE: O3CPRE as trigger output 1
\param[out] none
\retval none
*/
void timer_master_output1_trigger_source_select(uint32_t timer_periph, uint32_t outrigger)
{
uint32_t reg;
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x003BU), ERR_PERIPH);
} else if(NOT_TIMER_OUTPUT1_TRIGGER_SOURCE(outrigger)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x003BU), ERR_PARAM_INVALID);
} else
#endif /* FW_DEBUG_ERR_REPORT */
{
reg = TIMER_CTL1(timer_periph);
reg &= (~(uint32_t)TIMER_CTL1_MMC1);
reg |= (uint32_t)outrigger;
TIMER_CTL1(timer_periph) = reg;
}
}
/*!
\brief select TIMER slave mode
\param[in] timer_periph: TIMERx(x=0~4,7,14,22,23,40~44)
\param[in] slavemode: slave mode
only one parameter can be selected which is shown as below:
\arg TIMER_SLAVE_MODE_DISABLE: slave mode disable(x=0~4,7,14,22,23,40~44)
\arg TIMER_QUAD_DECODER_MODE0: quadrature decoder mode 0(x=0~4,7,22,23)
\arg TIMER_QUAD_DECODER_MODE1: quadrature decoder mode 1(x=0~4,7,22,23)
\arg TIMER_QUAD_DECODER_MODE2: quadrature decoder 2(x=0~4,7,22,23)
\arg TIMER_SLAVE_MODE_RESTART: restart mode(x=0~4,7,14,22,23,40~44)
\arg TIMER_SLAVE_MODE_PAUSE: pause mode(x=0~4,7,14,22,23,40~44)
\arg TIMER_SLAVE_MODE_EVENT: event mode(x=0~4,7,14,22,23,40~44)
\arg TIMER_SLAVE_MODE_EXTERNAL0: external clock mode 0(x=0~4,7,14,22,23,40~44)
\arg TIMER_SLAVE_MODE_RESTART_EVENT: restart + event mode(x=0~4,7,14,22,23,40~44)
\arg TIMER_NONQUAD_DECODER_MODE0: non-quadrature decoder mode 0(x=0~4,7,22,23)
\arg TIMER_NONQUAD_DECODER_MODE1: non-quadrature decoder mode 1(x=0~4,7,22,23)
\param[out] none
\retval none
*/
void timer_slave_mode_select(uint32_t timer_periph, uint32_t slavemode)
{
uint8_t TIMERx_temp = 0U;
uint32_t TIMERxCFG_temp = 0U;
volatile uint32_t *TIMERxCFG_addr;
uint32_t trigger_temp = 0U;
uint8_t i = 0U;
uint32_t TIMERxCFG0_value, TIMERxCFG1_value, TIMERxCFG2_value;
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x003CU), ERR_PERIPH);
} else if(NOT_TIMER_SLAVE_MODE_SELECT(slavemode)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x003CU), ERR_PARAM_INVALID);
} else
#endif /* FW_DEBUG_ERR_REPORT */
{
switch(timer_periph){
case TIMER0:
TIMERx_temp = SYSCFG_TIMER0;
break;
case TIMER1:
TIMERx_temp = SYSCFG_TIMER1;
break;
case TIMER2:
TIMERx_temp = SYSCFG_TIMER2;
break;
case TIMER3:
TIMERx_temp = SYSCFG_TIMER3;
break;
case TIMER4:
TIMERx_temp = SYSCFG_TIMER4;
break;
case TIMER7:
TIMERx_temp = SYSCFG_TIMER7;
break;
case TIMER14:
TIMERx_temp = SYSCFG_TIMER14;
break;
case TIMER22:
TIMERx_temp = SYSCFG_TIMER22;
break;
case TIMER23:
TIMERx_temp = SYSCFG_TIMER23;
break;
case TIMER40:
TIMERx_temp = SYSCFG_TIMER40;
break;
case TIMER41:
TIMERx_temp = SYSCFG_TIMER41;
break;
case TIMER42:
TIMERx_temp = SYSCFG_TIMER42;
break;
case TIMER43:
TIMERx_temp = SYSCFG_TIMER43;
break;
case TIMER44:
TIMERx_temp = SYSCFG_TIMER44;
break;
default:
break;
}
if(slavemode <= 5U){
TIMERxCFG_addr = &SYSCFG_TIMERCFG0(TIMERx_temp);
}else if((slavemode >= 6U)&&(slavemode <= 9U)){
TIMERxCFG_addr = &SYSCFG_TIMERCFG1(TIMERx_temp);
}else{
TIMERxCFG_addr = &SYSCFG_TIMERCFG2(TIMERx_temp);
}
/* read SYSCFG_TIMERCFG0 register value */
TIMERxCFG0_value = SYSCFG_TIMERCFG0(TIMERx_temp) & 0x7FFF7FFFU;
/* read SYSCFG_TIMERCFG1 register value */
TIMERxCFG1_value = SYSCFG_TIMERCFG1(TIMERx_temp) & 0x001F7FFFU;
/* read SYSCFG_TIMERCFG2 register value */
TIMERxCFG2_value = SYSCFG_TIMERCFG2(TIMERx_temp) & 0x001F0000U;
if((0U == TIMERxCFG0_value)&&(0U == TIMERxCFG1_value)&&(0U == TIMERxCFG2_value)){
if(slavemode <= 2U){
TIMERxCFG_temp = (uint32_t)0x1F << (slavemode * 5U);
}else if((slavemode <= 5U)&&(slavemode >= 3U)){
TIMERxCFG_temp = (uint32_t)0x1F << ((slavemode * 5U) + 1U);
}else if((slavemode <= 8U)&&(slavemode >= 6U)){
TIMERxCFG_temp = (uint32_t)0x1F << ((slavemode-6U) * 5U);
}else if(slavemode == 9U){
TIMERxCFG_temp = (uint32_t)0x1F << (((slavemode-6U) * 5U) + 1U);
}else{
TIMERxCFG_temp = (uint32_t)0x1F << (((slavemode-12U) * 5U) + 1U);
}
}else{
if((SYSCFG_TIMERCFG0(TIMERx_temp) & 0x7FFF7FFFU) != 0U){
for(i = 0U; i < 3U; i++){
if((SYSCFG_TIMERCFG0(TIMERx_temp) & (BITS(0,4) << (i * 5U))) != 0U){
trigger_temp = (SYSCFG_TIMERCFG0(TIMERx_temp) & (BITS(0,4) << (i * 5U))) >> (i * 5U);
SYSCFG_TIMERCFG0(TIMERx_temp)=0U;
break;
}
}
for(i = 3U; i < 6U; i++){
if((SYSCFG_TIMERCFG0(TIMERx_temp) & (BITS(0,4) << ((i * 5U)+1U))) != 0U){
trigger_temp = (SYSCFG_TIMERCFG0(TIMERx_temp) & (BITS(0,4) << ((i * 5U)+1U))) >> ((i * 5U)+1U);
SYSCFG_TIMERCFG0(TIMERx_temp)=0U;
break;
}
}
}else if((SYSCFG_TIMERCFG1(TIMERx_temp) & 0x001F7FFFU) != 0U){
for(i = 6U; i < 10U; i++){
if(i < 9U){
if((SYSCFG_TIMERCFG1(TIMERx_temp) & (BITS(0,4) << ((i-6U)*5U))) != 0U){
trigger_temp = (SYSCFG_TIMERCFG1(TIMERx_temp) & (BITS(0,4) << ((i-6U) * 5U))) >> ((i-6U) * 5U);
SYSCFG_TIMERCFG1(TIMERx_temp)=0U;
break;
}
}else{
if((SYSCFG_TIMERCFG1(TIMERx_temp) & (BITS(0,4) << ((i-6U)*5U+1U))) != 0U){
trigger_temp = (SYSCFG_TIMERCFG1(TIMERx_temp) & (BITS(0,4) << ((i-6U)*5U+1U))) >> ((i-6U)*5U+1U);
SYSCFG_TIMERCFG1(TIMERx_temp)=0U;
}
}
}
}else{
trigger_temp = (SYSCFG_TIMERCFG2(TIMERx_temp) & (BITS(0,4) << 16U)) >> 16U;
SYSCFG_TIMERCFG2(TIMERx_temp)=0U;
}
if(slavemode <= 2U){
TIMERxCFG_temp = trigger_temp << (slavemode * 5U);
}else if((slavemode <= 5U)&&(slavemode >= 3U)){
TIMERxCFG_temp = trigger_temp << ((slavemode * 5U) + 1U);
}else if((slavemode <= 8U)&&(slavemode >= 6U)){
TIMERxCFG_temp = trigger_temp << ((slavemode-6U) * 5U);
}else if(slavemode == 9U){
TIMERxCFG_temp = trigger_temp << (((slavemode-6U) * 5U) + 1U);
}else{
TIMERxCFG_temp = trigger_temp << (((slavemode-12U) * 5U) + 1U);
}
}
REG32(TIMERxCFG_addr) = TIMERxCFG_temp;
}
}
/*!
\brief configure TIMER master slave mode
\param[in] TIMERx(x=0~4,7,14,22,23,40~44)
\param[in] masterslave: master slave mode
only one parameter can be selected which is shown as below:
\arg TIMER_MASTER_SLAVE_MODE_ENABLE: master slave mode enable
\arg TIMER_MASTER_SLAVE_MODE_DISABLE: master slave mode disable
\param[out] none
\retval none
*/
void timer_master_slave_mode_config(uint32_t timer_periph, uint32_t masterslave)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x003DU), ERR_PERIPH);
} else if(NOT_TIMER_MASTER_SLAVE_MODE(masterslave)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x003DU), ERR_PARAM_INVALID);
} else
#endif /* FW_DEBUG_ERR_REPORT */
{
if(TIMER_MASTER_SLAVE_MODE_ENABLE == masterslave) {
TIMER_SMCFG(timer_periph) |= (uint32_t)TIMER_SMCFG_MSM;
} else if(TIMER_MASTER_SLAVE_MODE_DISABLE == masterslave) {
TIMER_SMCFG(timer_periph) &= (~(uint32_t)TIMER_SMCFG_MSM);
} else {
/* illegal parameters */
}
}
}
/*!
\brief configure TIMER external trigger input
\param[in] timer_periph: TIMERx(x=0~4,7,22,23)
\param[in] extprescaler: external trigger prescaler
only one parameter can be selected which is shown as below:
\arg TIMER_EXT_TRI_PSC_OFF: no divided
\arg TIMER_EXT_TRI_PSC_DIV2: divided by 2
\arg TIMER_EXT_TRI_PSC_DIV4: divided by 4
\arg TIMER_EXT_TRI_PSC_DIV8: divided by 8
\param[in] extpolarity: external trigger polarity
only one parameter can be selected which is shown as below:
\arg TIMER_ETP_FALLING: active low or falling edge active
\arg TIMER_ETP_RISING: active high or rising edge active
\param[in] extfilter: a value between 0 and 15
\param[out] none
\retval none
*/
void timer_external_trigger_config(uint32_t timer_periph, uint32_t extprescaler, uint32_t extpolarity, uint32_t extfilter)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x003EU), ERR_PERIPH);
} else if(NOT_TIMER_EXT_TRI_PSC(extprescaler)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x003EU), ERR_PARAM_INVALID);
} else if(NOT_TIMER_EXTPOLARITY(extpolarity)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x003EU), ERR_PARAM_INVALID);
} else if(NOT_TIMER_CHANNEL_EXTFILTER(extfilter)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x003EU), ERR_PARAM_INVALID);
} else
#endif /* FW_DEBUG_ERR_REPORT */
{
TIMER_SMCFG(timer_periph) &= (~(uint32_t)(TIMER_SMCFG_ETP | TIMER_SMCFG_ETPSC | TIMER_SMCFG_ETFC));
TIMER_SMCFG(timer_periph) |= (uint32_t)(extprescaler | extpolarity);
TIMER_SMCFG(timer_periph) |= (uint32_t)(extfilter << 8U);
}
}
/*!
\brief configure TIMER quadrature decoder mode
\param[in] timer_periph: TIMERx(x=0~4,7,22,23)
\param[in] decomode: quadrature decoder mode
only one parameter can be selected which is shown as below:
\arg TIMER_QUAD_DECODER_MODE0: counter counts on CI0FE0 edge depending on CI1FE1 level
\arg TIMER_QUAD_DECODER_MODE1: counter counts on CI1FE1 edge depending on CI0FE0 level
\arg TIMER_QUAD_DECODER_MODE2: counter counts on both CI0FE0 and CI1FE1 edges depending on the level of the other input
\param[in] ic0polarity: input capture polarity
only one parameter can be selected which is shown as below:
\arg TIMER_IC_POLARITY_RISING: capture rising edge
\arg TIMER_IC_POLARITY_FALLING: capture falling edge
\arg TIMER_IC_POLARITY_BOTH_EDGE: active both edge
\param[in] ic1polarity: input capture polarity
only one parameter can be selected which is shown as below:
\arg TIMER_IC_POLARITY_RISING: capture rising edge
\arg TIMER_IC_POLARITY_FALLING: capture falling edge
\arg TIMER_IC_POLARITY_BOTH_EDGE: active both edge
\param[out] none
\retval none
*/
void timer_quadrature_decoder_mode_config(uint32_t timer_periph, uint32_t decomode, uint16_t ic0polarity, uint16_t ic1polarity)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x003FU), ERR_PERIPH);
} else if(NOT_TIMER_QUAD_DECODER(decomode)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x003FU), ERR_PARAM_INVALID);
} else if(NOT_TIMER_ICPOLARITY(ic0polarity)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x003FU), ERR_PARAM_INVALID);
} else if(NOT_TIMER_ICPOLARITY(ic1polarity)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x003FU), ERR_PARAM_INVALID);
} else
#endif /* FW_DEBUG_ERR_REPORT */
{
/* configure the quadrature decoder mode */
timer_slave_mode_select(timer_periph, decomode);
/* configure input capture selection */
TIMER_CHCTL0(timer_periph) &= (uint32_t)(((~(uint32_t)TIMER_CHCTL0_CH0MS)) & ((~(uint32_t)TIMER_CHCTL0_CH1MS)));
TIMER_CHCTL0(timer_periph) |= (uint32_t)(TIMER_IC_SELECTION_DIRECTTI | ((uint32_t)TIMER_IC_SELECTION_DIRECTTI << 8U));
/* configure channel input capture polarity */
TIMER_CHCTL2(timer_periph) &= (~(uint32_t)(TIMER_CHCTL2_CH0P | TIMER_CHCTL2_MCH0P));
TIMER_CHCTL2(timer_periph) &= (~(uint32_t)(TIMER_CHCTL2_CH1P | TIMER_CHCTL2_MCH1P));
TIMER_CHCTL2(timer_periph) |= ((uint32_t)ic0polarity | ((uint32_t)ic1polarity << 4U));
}
}
/*!
\brief configure TIMER non-quadrature decoder mode
\param[in] timer_periph: TIMERx(x=0~4,7,22,23)
\param[in] decomode: non-quadrature decoder mode
only one parameter can be selected which is shown as below:
\arg TIMER_NONQUAD_DECODER_MODE0: non-quadrature decoder mode 0
\arg TIMER_NONQUAD_DECODER_MODE1: non-quadrature decoder mode 1
\param[in] ic1polarity: input capture polarity
only one parameter can be selected which is shown as below:
\arg TIMER_IC_POLARITY_RISING: capture rising edge
\arg TIMER_IC_POLARITY_FALLING: capture falling edge
\param[out] none
\retval none
*/
void timer_non_quadrature_decoder_mode_config(uint32_t timer_periph, uint32_t decomode, uint16_t ic1polarity)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0040U), ERR_PERIPH);
} else if(NOT_TIMER_NONQUAD_DECODER(decomode)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0040U), ERR_PARAM_INVALID);
} else if(NOT_TIMER_ICPOLARITY(ic1polarity)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0040U), ERR_PARAM_INVALID);
} else
#endif /* FW_DEBUG_ERR_REPORT */
{
/* configure the quadrature decoder mode */
timer_slave_mode_select(timer_periph, decomode);
/* configure input capture selection */
TIMER_CHCTL0(timer_periph) &= (uint32_t)(((~(uint32_t)TIMER_CHCTL0_CH0MS)) & ((~(uint32_t)TIMER_CHCTL0_CH1MS)));
TIMER_CHCTL0(timer_periph) |= (uint32_t)(TIMER_IC_SELECTION_DIRECTTI | ((uint32_t)TIMER_IC_SELECTION_DIRECTTI << 8U));
/* configure channel input capture polarity */
TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_CH1P);
TIMER_CHCTL2(timer_periph) |= ((uint32_t)ic1polarity << 4U);
}
}
/*!
\brief configure TIMER internal clock mode
\param[in] timer_periph: TIMERx(x=0~4,7,14,22,23,40~44)
\param[out] none
\retval none
*/
void timer_internal_clock_config(uint32_t timer_periph)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0041U), ERR_PERIPH);
} else
#endif /* FW_DEBUG_ERR_REPORT */
{
timer_slave_mode_select(timer_periph, TIMER_SLAVE_MODE_DISABLE);
}
}
/*!
\brief configure TIMER the internal trigger as external clock input
\param[in] timer_periph: TIMERx(x=0~4,7,14,22,23,40~44)
\param[in] intrigger: internal trigger selection
only one parameter can be selected which is shown as below:
\arg TIMER_SMCFG_TRGSEL_ITI0: internal trigger 0(TIMERx(x=0~4,7,14,22,23,40~44))
\arg TIMER_SMCFG_TRGSEL_ITI1: internal trigger 1(TIMERx(x=0~4,7,14,22,23,40~44))
\arg TIMER_SMCFG_TRGSEL_ITI2: internal trigger 2(TIMERx(x=0~4,7,14,22,23,40~44))
\arg TIMER_SMCFG_TRGSEL_ITI3: internal trigger 3(TIMERx(x=0~4,7,14,22,23,40~44))
\arg TIMER_L0_SMCFG_TRGSEL_ITI4: internal trigger 4 for General-L0 timer(TIMERx(x=1,2,22,23))
\arg TIMER_L0_SMCFG_TRGSEL_ITI5: internal trigger 5 for General-L0 timer(TIMERx(x=1,22,23))
\arg TIMER_L0_SMCFG_TRGSEL_ITI7: internal trigger 7 for General-L0 timer(TIMERx(x=4))
\arg TIMER_L0_SMCFG_TRGSEL_ITI9: internal trigger 9 for General-L0 timer(TIMERx(x=22,23))
\arg TIMER_L0_SMCFG_TRGSEL_ITI10: internal trigger 10 for General-L0 timer(TIMERx(x=22,23))
\arg TIMER_L0_SMCFG_TRGSEL_ITI11: internal trigger 11 for General-L0 timer(TIMERx(x=22,23))
\arg TIMER_SMCFG_TRGSEL_ITI12: internal trigger 12(TIMERx(x=0~4,7,23))
\arg TIMER_SMCFG_TRGSEL_ITI13: internal trigger 13(TIMERx(x=0~4,7,22))
\arg TIMER_SMCFG_TRGSEL_ITI14: internal trigger 14(TIMERx(x=0~4,7,14,22,23,40~44))
\param[out] none
\retval none
*/
void timer_internal_trigger_as_external_clock_config(uint32_t timer_periph, uint32_t intrigger)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0042U), ERR_PERIPH);
} else if(NOT_TIMER_INTRIGGER(intrigger)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0042U), ERR_PARAM_INVALID);
} else
#endif /* FW_DEBUG_ERR_REPORT */
{
/* select TIMER slave mode */
timer_slave_mode_select(timer_periph, TIMER_SLAVE_MODE_EXTERNAL0);
/* select TIMER input trigger source */
timer_input_trigger_source_select(timer_periph, intrigger);
}
}
/*!
\brief configure TIMER the external trigger as external clock input
\param[in] timer_periph: TIMERx(x=0~4,7,14,22,23,40~44)
\param[in] extrigger: external trigger selection
only one parameter can be selected which is shown as below:
\arg TIMER_SMCFG_TRGSEL_CI0F_ED: TI0 edge detector(TIMERx(x=0~4,7,14,22,23,40~44))
\arg TIMER_SMCFG_TRGSEL_CI0FE0: filtered channel 0 input(TIMERx(x=0~4,7,14,22,23,40~44))
\arg TIMER_SMCFG_TRGSEL_CI1FE1: filtered channel 1 input(TIMERx(x=0~4,7,14,22,23,40~44))
\arg TIMER_SMCFG_TRGSEL_CI2FE2: filtered channel 2 input(TIMERx(x=0,7))
\arg TIMER_SMCFG_TRGSEL_CI3FE3: filtered channel 3 input(TIMERx(x=0,7))
\arg TIMER_SMCFG_TRGSEL_MCI0FEM0: filtered multi mode channel 0 input(TIMERx(x=0,7,14,40~44))
\arg TIMER_SMCFG_TRGSEL_MCI1FEM1: filtered multi mode channel 1 input(TIMERx(x=0,7))
\arg TIMER_SMCFG_TRGSEL_MCI2FEM2: filtered multi mode channel 2 input(TIMERx(x=0,7))
\arg TIMER_SMCFG_TRGSEL_MCI3FEM3: filtered multi mode channel 3 input(TIMERx(x=0,7))
\param[in] extpolarity: external input capture polarity
only one parameter can be selected which is shown as below:
\arg TIMER_IC_POLARITY_RISING: active high or rising edge active
\arg TIMER_IC_POLARITY_FALLING: active low or falling edge active
\arg TIMER_IC_POLARITY_BOTH_EDGE: active both edge
\param[in] extfilter: a value between 0 and 15
\param[out] none
\retval none
*/
void timer_external_trigger_as_external_clock_config(uint32_t timer_periph, uint32_t extrigger, uint16_t extpolarity, uint32_t extfilter)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0043U), ERR_PERIPH);
} else if(NOT_TIMER_EXTRIGGER(extrigger)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0043U), ERR_PARAM_INVALID);
} else if(NOT_TIMER_ICPOLARITY(extpolarity)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0043U), ERR_PARAM_INVALID);
} else if(NOT_TIMER_CHANNEL_EXTFILTER(extfilter)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0043U), ERR_PARAM_OUT_OF_RANGE);
} else
#endif /* FW_DEBUG_ERR_REPORT */
{
if(TIMER_SMCFG_TRGSEL_CI1FE1 == extrigger) {
/* reset the CH1EN bit */
TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_CH1EN);
/* reset the CH1P and MCH1P bits */
TIMER_CHCTL2(timer_periph) &= (~(uint32_t)(TIMER_CHCTL2_CH1P | TIMER_CHCTL2_MCH1P));
/* set the CH1P and MCH1P bits */
TIMER_CHCTL2(timer_periph) |= (uint32_t)((uint32_t)extpolarity << 4U);
/* reset the CH1MS bit */
TIMER_CHCTL0(timer_periph) &= (~(uint32_t)TIMER_CHCTL0_CH1MS);
/* set the CH1MS bit */
TIMER_CHCTL0(timer_periph) |= (uint32_t)((uint32_t)TIMER_IC_SELECTION_DIRECTTI << 8U);
/* reset the CH1CAPFLT bit */
TIMER_CHCTL0(timer_periph) &= (~(uint32_t)TIMER_CHCTL0_CH1CAPFLT);
/* set the CH1CAPFLT bit */
TIMER_CHCTL0(timer_periph) |= (uint32_t)(extfilter << 12U);
/* set the CH1EN bit */
TIMER_CHCTL2(timer_periph) |= (uint32_t)TIMER_CHCTL2_CH1EN;
} else if(TIMER_SMCFG_TRGSEL_CI2FE2 == extrigger) {
/* reset the CH2EN bit */
TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_CH2EN);
/* reset the CH2P and MCH2P bits */
TIMER_CHCTL2(timer_periph) &= (~(uint32_t)(TIMER_CHCTL2_CH2P | TIMER_CHCTL2_MCH2P));
/* set the CH2P and MCH2P bits */
TIMER_CHCTL2(timer_periph) |= ((uint32_t)extpolarity << 8U);
/* reset the CH2MS bit */
TIMER_CHCTL1(timer_periph) &= (~(uint32_t)TIMER_CHCTL1_CH2MS);
/* set the CH2MS bit */
TIMER_CHCTL1(timer_periph) |= ((uint32_t)TIMER_IC_SELECTION_DIRECTTI);
/* reset the CH2CAPFLT bit */
TIMER_CHCTL1(timer_periph) &= (~(uint32_t)TIMER_CHCTL1_CH2CAPFLT);
/* set the CH2CAPFLT bit */
TIMER_CHCTL1(timer_periph) |= (uint32_t)(extfilter << 4U);
/* set the CH2EN bit */
TIMER_CHCTL2(timer_periph) |= (uint32_t)TIMER_CHCTL2_CH2EN;
} else if(TIMER_SMCFG_TRGSEL_CI3FE3 == extrigger) {
/* reset the CH3EN bit */
TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_CH3EN);
/* reset the CH3P and MCH3P bits */
TIMER_CHCTL2(timer_periph) &= (~(uint32_t)(TIMER_CHCTL2_CH3P | TIMER_CHCTL2_MCH3P));
/* set the CH3P and MCH3P bits */
TIMER_CHCTL2(timer_periph) |= ((uint32_t)extpolarity << 12U);
/* reset the CH3MS bit */
TIMER_CHCTL1(timer_periph) &= (~(uint32_t)TIMER_CHCTL1_CH3MS);
/* set the CH3MS bit */
TIMER_CHCTL1(timer_periph) |= ((uint32_t)TIMER_IC_SELECTION_DIRECTTI << 8U);
/* reset the CH3CAPFLT bit */
TIMER_CHCTL1(timer_periph) &= (~(uint32_t)TIMER_CHCTL1_CH3CAPFLT);
/* set the CH3CAPFLT bit */
TIMER_CHCTL1(timer_periph) |= (uint32_t)(extfilter << 12U);
/* set the CH3EN bit */
TIMER_CHCTL2(timer_periph) |= (uint32_t)TIMER_CHCTL2_CH3EN;
} else if(TIMER_SMCFG_TRGSEL_MCI0FEM0 == extrigger) {
/* reset the MCH0EN bit */
TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_MCH0EN);
/* reset the MCH0FP bit */
TIMER_MCHCTL2(timer_periph) &= (~(uint32_t)TIMER_MCHCTL2_MCH0FP);
/* set the MCH0FP bit */
if(TIMER_IC_POLARITY_RISING == extpolarity) {
TIMER_MCHCTL2(timer_periph) |= (uint32_t)TIMER_IMC_POLARITY_RISING;
} else if(TIMER_IC_POLARITY_FALLING == extpolarity) {
TIMER_MCHCTL2(timer_periph) |= (uint32_t)TIMER_IMC_POLARITY_FALLING;
} else {
TIMER_MCHCTL2(timer_periph) |= (uint32_t)TIMER_IMC_POLARITY_BOTH_EDGE;
}
/* reset the MCH0MS bit */
TIMER_MCHCTL0(timer_periph) &= (~(uint32_t)TIMER_MCHCTL0_MCH0MS);
/* set the MCH0MS bit */
TIMER_MCHCTL0(timer_periph) |= (uint32_t)TIMER_IC_SELECTION_DIRECTTI;
/* reset the MCH0CAPFLT bit */
TIMER_MCHCTL0(timer_periph) &= (~(uint32_t)TIMER_MCHCTL0_MCH0CAPFLT);
/* reset the MCH0CAPFLT bit */
TIMER_MCHCTL0(timer_periph) |= (uint32_t)(extfilter << 4U);
/* set the MCH0EN bit */
TIMER_CHCTL2(timer_periph) |= (uint32_t)TIMER_CHCTL2_MCH0EN;
} else if(TIMER_SMCFG_TRGSEL_MCI1FEM1 == extrigger) {
/* reset the MCH1EN bit */
TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_MCH1EN);
/* reset the MCH1FP bit */
TIMER_MCHCTL2(timer_periph) &= (~(uint32_t)TIMER_MCHCTL2_MCH1FP);
/* set the MCH1FP bit */
if(TIMER_IC_POLARITY_RISING == extpolarity) {
TIMER_MCHCTL2(timer_periph) |= (uint32_t)TIMER_IMC_POLARITY_RISING << 2U;
} else if(TIMER_IC_POLARITY_FALLING == extpolarity) {
TIMER_MCHCTL2(timer_periph) |= (uint32_t)TIMER_IMC_POLARITY_FALLING << 2U;
} else {
TIMER_MCHCTL2(timer_periph) |= (uint32_t)TIMER_IMC_POLARITY_BOTH_EDGE << 2U;
}
/* reset the MCH1MS bit */
TIMER_MCHCTL0(timer_periph) &= (~(uint32_t)TIMER_MCHCTL0_MCH1MS);
/* set the MCH1MS bit */
TIMER_MCHCTL0(timer_periph) |= ((uint32_t)TIMER_IC_SELECTION_DIRECTTI << 8U);
/* reset the MCH1CAPFLT bit */
TIMER_MCHCTL0(timer_periph) &= (~(uint32_t)TIMER_MCHCTL0_MCH1CAPFLT);
/* set the MCH1CAPFLT bit */
TIMER_MCHCTL0(timer_periph) |= (uint32_t)(extfilter << 12U);
/* set the MCH1EN bit */
TIMER_CHCTL2(timer_periph) |= (uint32_t)TIMER_CHCTL2_MCH1EN;
} else if(TIMER_SMCFG_TRGSEL_MCI2FEM2 == extrigger) {
/* reset the MCH2EN bit */
TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_MCH2EN);
/* reset the MCH2FP bit */
TIMER_MCHCTL2(timer_periph) &= (~(uint32_t)TIMER_MCHCTL2_MCH2FP);
/* set the MCH2FP bit */
if(TIMER_IC_POLARITY_RISING == extpolarity) {
TIMER_MCHCTL2(timer_periph) |= (uint32_t)TIMER_IMC_POLARITY_RISING << 4U;
} else if(TIMER_IC_POLARITY_FALLING == extpolarity) {
TIMER_MCHCTL2(timer_periph) |= (uint32_t)TIMER_IMC_POLARITY_FALLING << 4U;
} else {
TIMER_MCHCTL2(timer_periph) |= (uint32_t)TIMER_IMC_POLARITY_BOTH_EDGE << 4U;
}
/* reset the MCH2MS bit */
TIMER_MCHCTL1(timer_periph) &= (~(uint32_t)TIMER_MCHCTL1_MCH2MS);
/* set the MCH2MS bit */
TIMER_MCHCTL1(timer_periph) |= ((uint32_t)TIMER_IC_SELECTION_DIRECTTI);
/* reset the MCH2CAPFLT bit */
TIMER_MCHCTL1(timer_periph) &= (~(uint32_t)TIMER_MCHCTL1_MCH2CAPFLT);
/* set the MCH2CAPFLT bit */
TIMER_MCHCTL1(timer_periph) |= (uint32_t)(extfilter << 4U);
/* set the MCH2EN bit */
TIMER_CHCTL2(timer_periph) |= (uint32_t)TIMER_CHCTL2_MCH2EN;
} else if(TIMER_SMCFG_TRGSEL_MCI3FEM3 == extrigger) {
/* reset the MCH3EN bit */
TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_MCH3EN);
/* reset the MCH3FP bit */
TIMER_MCHCTL2(timer_periph) &= (~(uint32_t)TIMER_MCHCTL2_MCH3FP);
/* set the MCH3FP bit */
if(TIMER_IC_POLARITY_RISING == extpolarity) {
TIMER_MCHCTL2(timer_periph) |= (uint32_t)TIMER_IMC_POLARITY_RISING << 6U;
} else if(TIMER_IC_POLARITY_FALLING == extpolarity) {
TIMER_MCHCTL2(timer_periph) |= (uint32_t)TIMER_IMC_POLARITY_FALLING << 6U;
} else {
TIMER_MCHCTL2(timer_periph) |= (uint32_t)TIMER_IMC_POLARITY_BOTH_EDGE << 6U;
}
/* reset the MCH3MS bit */
TIMER_MCHCTL1(timer_periph) &= (~(uint32_t)TIMER_MCHCTL1_MCH3MS);
/* set the MCH3MS bit */
TIMER_MCHCTL1(timer_periph) |= ((uint32_t)TIMER_IC_SELECTION_DIRECTTI << 8U);
/* reset the MCH3CAPFLT bit */
TIMER_MCHCTL1(timer_periph) &= (~(uint32_t)TIMER_MCHCTL1_MCH3CAPFLT);
/* set the MCH3CAPFLT bit */
TIMER_MCHCTL1(timer_periph) |= (uint32_t)(extfilter << 12U);
/* set the MCH3EN bit */
TIMER_CHCTL2(timer_periph) |= (uint32_t)TIMER_CHCTL2_MCH3EN;
} else {
/* reset the CH0EN bit */
TIMER_CHCTL2(timer_periph) &= (~(uint32_t)TIMER_CHCTL2_CH0EN);
/* reset the CH0P and MCH0P bits */
TIMER_CHCTL2(timer_periph) &= (~(uint32_t)(TIMER_CHCTL2_CH0P | TIMER_CHCTL2_MCH0P));
/* set the CH0P and MCH0P bits */
TIMER_CHCTL2(timer_periph) |= (uint32_t)extpolarity;
/* reset the CH0MS bit */
TIMER_CHCTL0(timer_periph) &= (~(uint32_t)TIMER_CHCTL0_CH0MS);
/* set the CH0MS bit */
TIMER_CHCTL0(timer_periph) |= (uint32_t)TIMER_IC_SELECTION_DIRECTTI;
/* reset the CH0CAPFLT bit */
TIMER_CHCTL0(timer_periph) &= (~(uint32_t)TIMER_CHCTL0_CH0CAPFLT);
/* reset the CH0CAPFLT bit */
TIMER_CHCTL0(timer_periph) |= (uint32_t)(extfilter << 4U);
/* set the CH0EN bit */
TIMER_CHCTL2(timer_periph) |= (uint32_t)TIMER_CHCTL2_CH0EN;
}
/* select TIMER slave mode */
timer_slave_mode_select(timer_periph, TIMER_SLAVE_MODE_EXTERNAL0);
/* select TIMER input trigger source */
timer_input_trigger_source_select(timer_periph, extrigger);
}
}
/*!
\brief configure TIMER the external clock mode0
\param[in] timer_periph: TIMERx(x=0~4,7,14,22,23,40~44)
\param[in] extprescaler: external trigger prescaler
only one parameter can be selected which is shown as below:
\arg TIMER_EXT_TRI_PSC_OFF: no divided
\arg TIMER_EXT_TRI_PSC_DIV2: divided by 2
\arg TIMER_EXT_TRI_PSC_DIV4: divided by 4
\arg TIMER_EXT_TRI_PSC_DIV8: divided by 8
\param[in] extpolarity: external input capture polarity
only one parameter can be selected which is shown as below:
\arg TIMER_ETP_FALLING: active low or falling edge active
\arg TIMER_ETP_RISING: active high or rising edge active
\param[in] extfilter: a value between 0 and 15
\param[out] none
\retval none
*/
void timer_external_clock_mode0_config(uint32_t timer_periph, uint32_t extprescaler, uint32_t extpolarity, uint32_t extfilter)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0044U), ERR_PERIPH);
} else if(NOT_TIMER_EXT_TRI_PSC(extprescaler)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0044U), ERR_PARAM_INVALID);
} else if(NOT_TIMER_EXTPOLARITY(extpolarity)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0044U), ERR_PARAM_INVALID);
} else if(NOT_TIMER_CHANNEL_EXTFILTER(extfilter)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0044U), ERR_PARAM_OUT_OF_RANGE);
} else
#endif /* FW_DEBUG_ERR_REPORT */
{
/* configure TIMER external trigger input */
timer_external_trigger_config(timer_periph, extprescaler, extpolarity, extfilter);
/* select TIMER slave mode */
timer_slave_mode_select(timer_periph, TIMER_SLAVE_MODE_EXTERNAL0);
/* select TIMER input trigger source */
timer_input_trigger_source_select(timer_periph, TIMER_SMCFG_TRGSEL_ETIFP);
}
}
/*!
\brief configure TIMER the external clock mode1
\param[in] timer_periph: TIMERx(x=0~4,7,22,23)
\param[in] extprescaler: external trigger prescaler
only one parameter can be selected which is shown as below:
\arg TIMER_EXT_TRI_PSC_OFF: no divided
\arg TIMER_EXT_TRI_PSC_DIV2: divided by 2
\arg TIMER_EXT_TRI_PSC_DIV4: divided by 4
\arg TIMER_EXT_TRI_PSC_DIV8: divided by 8
\param[in] extpolarity: external input capture polarity
only one parameter can be selected which is shown as below:
\arg TIMER_ETP_FALLING: active low or falling edge active
\arg TIMER_ETP_RISING: active high or rising edge active
\param[in] extfilter: a value between 0 and 15
\param[out] none
\retval none
*/
void timer_external_clock_mode1_config(uint32_t timer_periph, uint32_t extprescaler, uint32_t extpolarity, uint32_t extfilter)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0045U), ERR_PERIPH);
} else if(NOT_TIMER_EXT_TRI_PSC(extprescaler)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0045U), ERR_PARAM_INVALID);
} else if(NOT_TIMER_EXTPOLARITY(extpolarity)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0045U), ERR_PARAM_INVALID);
} else if(NOT_TIMER_CHANNEL_EXTFILTER(extfilter)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0045U), ERR_PARAM_OUT_OF_RANGE);
} else
#endif /* FW_DEBUG_ERR_REPORT */
{
/* configure TIMER external trigger input */
timer_external_trigger_config(timer_periph, extprescaler, extpolarity, extfilter);
TIMER_SMCFG(timer_periph) |= (uint32_t)TIMER_SMCFG_SMC1;
}
}
/*!
\brief disable TIMER the external clock mode1
\param[in] timer_periph: TIMERx(x=0~4,7,22,23)
\param[out] none
\retval none
*/
void timer_external_clock_mode1_disable(uint32_t timer_periph)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0046U), ERR_PERIPH);
} else
#endif /* FW_DEBUG_ERR_REPORT */
{
TIMER_SMCFG(timer_periph) &= (~(uint32_t)TIMER_SMCFG_SMC1);
}
}
/*!
\brief configure TIMER write CHxVAL register selection
\param[in] timer_periph: TIMERx(x=0~4,14~16,22,23,40~44)
\param[in] ccsel: write CHxVAL register selection
only one parameter can be selected which is shown as below:
\arg TIMER_CHVSEL_DISABLE: no effect
\arg TIMER_CHVSEL_ENABLE: when write the CHxVAL register, if the write value is same as the CHxVAL value, the write access is ignored
\param[out] none
\retval none
*/
void timer_write_chxval_register_config(uint32_t timer_periph, uint16_t ccsel)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0047U), ERR_PERIPH);
} else if(NOT_TIMER_CHVSEL_CCSEL(ccsel)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0047U), ERR_PARAM_INVALID);
} else
#endif /* FW_DEBUG_ERR_REPORT */
{
if(TIMER_CHVSEL_ENABLE == ccsel) {
TIMER_CFG(timer_periph) |= (uint32_t)TIMER_CFG_CHVSEL;
} else if(TIMER_CHVSEL_DISABLE == ccsel) {
TIMER_CFG(timer_periph) &= (~(uint32_t)TIMER_CFG_CHVSEL);
} else {
/* illegal parameters */
}
}
}
/*!
\brief configure TIMER output value selection
\param[in] timer_periph: TIMERx(x=0,7,14~16,40~44)
\param[in] outsel: output value selection
only one parameter can be selected which is shown as below:
\arg TIMER_OUTSEL_DISABLE: no effect
\arg TIMER_OUTSEL_ENABLE: if POEN and IOS is 0, the output disabled
\param[out] none
\retval none
*/
void timer_output_value_selection_config(uint32_t timer_periph, uint16_t outsel)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0048U), ERR_PERIPH);
} else if(NOT_TIMER_OUTSEL(outsel)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0048U), ERR_PARAM_INVALID);
} else
#endif /* FW_DEBUG_ERR_REPORT */
{
if(TIMER_OUTSEL_ENABLE == outsel) {
TIMER_CFG(timer_periph) |= (uint32_t)TIMER_CFG_OUTSEL;
} else if(TIMER_OUTSEL_DISABLE == outsel) {
TIMER_CFG(timer_periph) &= (~(uint32_t)TIMER_CFG_OUTSEL);
} else {
/* illegal parameters */
}
}
}
/*!
\brief configure commutation control shadow register update selection
\param[in] timer_periph: TIMERx(x=0,7,14~16,40~44)
\param[in] cssel: commutation control shadow register selection
only one parameter can be selected which is shown as below:
\arg TIMER_CCUSEL_DISABLE: the shadow registers update when the counter generates an overflow/ underflow event
\arg TIMER_CCUSEL_ENABLE: the shadow registers update when the counter generates an overflow/ underflow event and the repetition counter value is zero
\param[out] none
\retval none
*/
void timer_commutation_control_shadow_register_config(uint32_t timer_periph, uint16_t ccssel)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0049U), ERR_PERIPH);
} else if(NOT_TIMER_CCUSEL_CCSSEL(ccssel)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0049U), ERR_PARAM_INVALID);
} else
#endif /* FW_DEBUG_ERR_REPORT */
{
if(TIMER_CCUSEL_ENABLE == ccssel) {
TIMER_CFG(timer_periph) |= (uint32_t)TIMER_CFG_CCUSEL;
} else if(TIMER_CCUSEL_DISABLE == ccssel) {
TIMER_CFG(timer_periph) &= (~(uint32_t)TIMER_CFG_CCUSEL);
} else {
/* illegal parameters */
}
}
}
/*!
\brief configure TIMER output match pulse selection
\param[in] timer_periph: TIMERx(x=0~4,7,14,22,23,40~44))
\param[in] channel: TIMER channel
only one parameter can be selected which is shown as below:
\arg TIMER_CH_0: TIMER channel 0(TIMERx(x=0~4,7,14,22,23,40~44))
\arg TIMER_CH_1: TIMER channel 1(TIMERx(x=0~4,7,14,22,23,40~44))
\arg TIMER_CH_2: TIMER channel 2(TIMERx(x=0~4,7,22,23))
\arg TIMER_CH_3: TIMER channel 3(TIMERx(x=0~4,7,22,23))
\param[in] pulsesel: output match pulse selection
only one parameter can be selected which is shown as below:
\arg TIMER_PULSE_OUTPUT_NORMAL: channel output normal
\arg TIMER_PULSE_OUTPUT_CNT_UP: pulse output only when counting up
\arg TIMER_PULSE_OUTPUT_CNT_DOWN: pulse output only when counting down
\arg TIMER_PULSE_OUTPUT_CNT_BOTH: pulse output when counting up or down
\param[out] none
\retval none
*/
void timer_output_match_pulse_select(uint32_t timer_periph, uint32_t channel, uint16_t pulsesel)
{
uint32_t reg;
reg = TIMER_CTL2(timer_periph);
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x004AU), ERR_PERIPH);
} else if(NOT_TIMER_CHANNEL(channel)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x004AU), ERR_PARAM_INVALID);
} else if(NOT_TIMER_PLUSE_OUTPUT(pulsesel)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x004AU), ERR_PARAM_INVALID);
}else
#endif /* FW_DEBUG_ERR_REPORT */
{
switch(channel) {
/* configure TIMER_CH_0 */
case TIMER_CH_0:
reg &= (~(uint32_t)((uint32_t)TIMER_PULSE_OUTPUT_MASK << 8U));
reg |= (uint32_t)((uint32_t)pulsesel << 8U);
break;
/* configure TIMER_CH_1 */
case TIMER_CH_1:
reg &= (~(uint32_t)((uint32_t)TIMER_PULSE_OUTPUT_MASK << 10U));
reg |= (uint32_t)((uint32_t)pulsesel << 10U);
break;
/* configure TIMER_CH_2 */
case TIMER_CH_2:
reg &= (~(uint32_t)((uint32_t)TIMER_PULSE_OUTPUT_MASK << 12U));
reg |= (uint32_t)((uint32_t)pulsesel << 12U);
break;
/* configure TIMER_CH_3 */
case TIMER_CH_3:
reg &= (~(uint32_t)((uint32_t)TIMER_PULSE_OUTPUT_MASK << 14U));
reg |= (uint32_t)((uint32_t)pulsesel << 14U);
break;
default:
break;
}
TIMER_CTL2(timer_periph) = reg;
}
}
/*!
\brief configure the TIMER composite PWM mode
\param[in] timer_periph: TIMERx(x=0~4,7,14,22,23,40~44))
\param[in] channel: TIMER channel
only one parameter can be selected which is shown as below:
\arg TIMER_CH_0: TIMER channel 0(TIMERx(x=0~4,7,14,22,23,40~44))
\arg TIMER_CH_1: TIMER channel 1(TIMERx(x=0~4,7,14,22,23,40~44))
\arg TIMER_CH_2: TIMER channel 2(TIMERx(x=0~4,7,22,23))
\arg TIMER_CH_3: TIMER channel 3(TIMERx(x=0~4,7,22,23))
\param[in] newvalue: ENABLE or DISABLE
\param[out] none
\retval none
*/
void timer_channel_composite_pwm_mode_config(uint32_t timer_periph, uint32_t channel, ControlStatus newvalue)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x004BU), ERR_PERIPH);
} else if(NOT_TIMER_CHANNEL(channel)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x004BU), ERR_PARAM_INVALID);
} else
#endif /* FW_DEBUG_ERR_REPORT */
{
if(ENABLE == newvalue) {
TIMER_CTL2(timer_periph) |= (uint32_t)(TIMER_CTL2_CH0CPWMEN << channel);
} else {
TIMER_CTL2(timer_periph) &= (~(uint32_t)(TIMER_CTL2_CH0CPWMEN << channel));
}
}
}
/*!
\brief configure the TIMER composite PWM mode output pulse value
\param[in] timer_periph: TIMERx(x=0~4,7,14,22,23,40~44))
\param[in] channel: TIMER channel
only one parameter can be selected which is shown as below:
\arg TIMER_CH_0: TIMER channel 0(TIMERx(x=0~4,7,14,22,23,40~44))
\arg TIMER_CH_1: TIMER channel 1(TIMERx(x=0~4,7,14,22,23,40~44))
\arg TIMER_CH_2: TIMER channel 2(TIMERx(x=0~4,7,22,23))
\arg TIMER_CH_3: TIMER channel 3(TIMERx(x=0~4,7,22,23))
\param[in] pulse: channel compare value, 0~0xFFFFFFFF
\param[in] add_pulse: channel additional compare value, 0~0xFFFFFFFF
\param[out] none
\retval none
*/
void timer_channel_composite_pwm_mode_output_pulse_value_config(uint32_t timer_periph, uint32_t channel, uint32_t pulse, uint32_t add_pulse)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x004CU), ERR_PERIPH);
} else if(NOT_TIMER_CHANNEL(channel)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x004CU), ERR_PARAM_INVALID);
} else
#endif /* FW_DEBUG_ERR_REPORT */
{
switch(channel) {
/* configure TIMER_CH_0 */
case TIMER_CH_0:
TIMER_CH0CV(timer_periph) = (uint32_t)pulse;
TIMER_CH0COMV_ADD(timer_periph) = (uint32_t)add_pulse;
break;
/* configure TIMER_CH_1 */
case TIMER_CH_1:
TIMER_CH1CV(timer_periph) = (uint32_t)pulse;
TIMER_CH1COMV_ADD(timer_periph) = (uint32_t)add_pulse;
break;
/* configure TIMER_CH_2 */
case TIMER_CH_2:
TIMER_CH2CV(timer_periph) = (uint32_t)pulse;
TIMER_CH2COMV_ADD(timer_periph) = (uint32_t)add_pulse;
break;
/* configure TIMER_CH_3 */
case TIMER_CH_3:
TIMER_CH3CV(timer_periph) = (uint32_t)pulse;
TIMER_CH3COMV_ADD(timer_periph) = (uint32_t)add_pulse;
break;
default:
break;
}
}
}
/*!
\brief configure TIMER channel additional compare value
\param[in] timer_periph: TIMERx(x=0~4,7,14,22,23,40~44))
\param[in] channel: TIMER channel
only one parameter can be selected which is shown as below:
\arg TIMER_CH_0: TIMER channel 0(TIMERx(x=0~4,7,14,22,23,40~44))
\arg TIMER_CH_1: TIMER channel 1(TIMERx(x=0~4,7,14,22,23,40~44))
\arg TIMER_CH_2: TIMER channel 2(TIMERx(x=0~4,7,22,23))
\arg TIMER_CH_3: TIMER channel 3(TIMERx(x=0~4,7,22,23))
\param[in] value: channel additional compare value, 0~0xFFFFFFFF
\param[out] none
\retval none
*/
void timer_channel_additional_compare_value_config(uint32_t timer_periph, uint16_t channel, uint32_t value)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x004DU), ERR_PERIPH);
} else if(NOT_TIMER_CHANNEL(channel)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x004DU), ERR_PARAM_INVALID);
} else
#endif /* FW_DEBUG_ERR_REPORT */
{
switch(channel) {
/* configure TIMER_CH_0 */
case TIMER_CH_0:
TIMER_CH0COMV_ADD(timer_periph) = (uint32_t)value;
break;
/* configure TIMER_CH_1 */
case TIMER_CH_1:
TIMER_CH1COMV_ADD(timer_periph) = (uint32_t)value;
break;
/* configure TIMER_CH_2 */
case TIMER_CH_2:
TIMER_CH2COMV_ADD(timer_periph) = (uint32_t)value;
break;
/* configure TIMER_CH_3 */
case TIMER_CH_3:
TIMER_CH3COMV_ADD(timer_periph) = (uint32_t)value;
break;
default:
break;
}
}
}
/*!
\brief configure TIMER channel additional output shadow function
\param[in] timer_periph: TIMERx(x=0~4,7,14~16,22,23,40~44)
\param[in] channel: TIMER channel
only one parameter can be selected which is shown as below:
\arg TIMER_CH_0: TIMER channel 0(TIMERx(x=0~4,7,14~16,22,23,40~44))
\arg TIMER_CH_1: TIMER channel 1(TIMERx(x=0~4,7,14,22,23,40~44))
\arg TIMER_CH_2: TIMER channel 2(TIMERx(x=0~4,7,22,23))
\arg TIMER_CH_3: TIMER channel 3(TIMERx(x=0~4,7,22,23))
\param[in] aocshadow: channel additional output compare shadow
only one parameter can be selected which is shown as below:
\arg TIMER_ADD_SHADOW_ENABLE: channel additional compare output shadow enable
\arg TIMER_ADD_SHADOW_DISABLE: channel additional compare output shadow disable
\param[out] none
\retval none
*/
void timer_channel_additional_output_shadow_config(uint32_t timer_periph, uint16_t channel, uint16_t aocshadow)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x004EU), ERR_PERIPH);
} else if(NOT_TIMER_CHANNEL(channel)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x004EU), ERR_PARAM_INVALID);
} else if(NOT_TIMER_ADD_SHADOW(aocshadow)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x004EU), ERR_PARAM_INVALID);
}else
#endif /* FW_DEBUG_ERR_REPORT */
{
switch(channel) {
/* configure TIMER_CH_0 */
case TIMER_CH_0:
TIMER_CHCTL0(timer_periph) &= (~(uint32_t)TIMER_CHCTL0_CH0COMADDSEN);
TIMER_CHCTL0(timer_periph) |= (uint32_t)((uint32_t)aocshadow << 28U);
break;
/* configure TIMER_CH_1 */
case TIMER_CH_1:
TIMER_CHCTL0(timer_periph) &= (~(uint32_t)TIMER_CHCTL0_CH1COMADDSEN);
TIMER_CHCTL0(timer_periph) |= (uint32_t)((uint32_t)aocshadow << 29U);
break;
/* configure TIMER_CH_2 */
case TIMER_CH_2:
TIMER_CHCTL1(timer_periph) &= (~(uint32_t)TIMER_CHCTL1_CH2COMADDSEN);
TIMER_CHCTL1(timer_periph) |= (uint32_t)((uint32_t)aocshadow << 28U);
break;
/* configure TIMER_CH_3 */
case TIMER_CH_3:
TIMER_CHCTL1(timer_periph) &= (~(uint32_t)TIMER_CHCTL1_CH3COMADDSEN);
TIMER_CHCTL1(timer_periph) |= (uint32_t)((uint32_t)aocshadow << 29U);
break;
default:
break;
}
}
}
/*!
\brief read TIMER channel additional compare value
\param[in] timer_periph: TIMERx(x=0~4,7,14,22,23,40~44))
\param[in] channel: TIMER channel
only one parameter can be selected which is shown as below:
\arg TIMER_CH_0: TIMER channel 0(TIMERx(x=0~4,7,14,22,23,40~44))
\arg TIMER_CH_1: TIMER channel 1(TIMERx(x=0~4,7,14,22,23,40~44))
\arg TIMER_CH_2: TIMER channel 2(TIMERx(x=0~4,7,22,23))
\arg TIMER_CH_3: TIMER channel 3(TIMERx(x=0~4,7,22,23))
\param[out] none
\retval value: channel additional compare value, 0~0xFFFFFFFF
*/
uint32_t timer_channel_additional_compare_value_read(uint32_t timer_periph, uint16_t channel)
{
uint32_t value = 0U;
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x004FU), ERR_PERIPH);
} else if(NOT_TIMER_CHANNEL(channel)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x004FU), ERR_PARAM_INVALID);
} else
#endif /* FW_DEBUG_ERR_REPORT */
{
switch(channel) {
case TIMER_CH_0:
/* read CH0COMV_ADD value */
value = TIMER_CH0COMV_ADD(timer_periph);
break;
case TIMER_CH_1:
/* read CH1COMV_ADD value */
value = TIMER_CH1COMV_ADD(timer_periph);
break;
case TIMER_CH_2:
/* read CH2COMV_ADD value */
value = TIMER_CH2COMV_ADD(timer_periph);
break;
case TIMER_CH_3:
/* read CH3COMV_ADD value */
value = TIMER_CH3COMV_ADD(timer_periph);
break;
default:
break;
}
}
return value;
}
/*!
\brief configure the TIMER break source
\param[in] timer_periph: TIMERx(x=0,7,14~16,40~44)
\param[in] break_num: TIMER BREAKx
only one parameter can be selected which is shown as below:
\arg TIMER_BREAK0: BREAK0 input signals, TIMERx(x=0,7,14~16,40~44)
\arg TIMER_BREAK1: BREAK1 input signals, TIMERx(x=0,7)
\param[in] break_src: break source
only one parameter can be selected which is shown as below:
\arg TIMER_BRKIN0: BRKIN0 alternate function input enable, TIMERx(x=0,7,14~16,40~44)
\arg TIMER_BRKIN1: BRKIN1 alternate function input enable, TIMERx(x=0,7)
\arg TIMER_BRKIN2: BRKIN2 alternate function input enable, TIMERx(x=0,7)
\arg TIMER_BRKCMP0: CMP0 input enable, TIMERx(x=0,7,14~16,40~44)
\arg TIMER_BRKCMP1: CMP1 input enable, TIMERx(x=0,7,14~16,40~44)
\arg TIMER_BRKHPDF: HPDF input enable, TIMERx(x=0,7,14~16,40~44)
\param[in] newvalue: ENABLE or DISABLE
\param[out] none
\retval none
*/
void timer_break_external_source_config(uint32_t timer_periph, uint16_t break_num, uint32_t break_src, ControlStatus newvalue)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0050U), ERR_PERIPH);
}else if(NOT_TIMER_BREAK_NUM(break_num)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0050U), ERR_PARAM_INVALID);
} else if(NOT_TIMER_BREAK_SRC(break_src)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0050U), ERR_PARAM_INVALID);
} else
#endif /* FW_DEBUG_ERR_REPORT */
{
if(ENABLE == newvalue) {
if(TIMER_BREAK0 == break_num) {
TIMER_AFCTL0(timer_periph) |= break_src;
} else if(TIMER_BREAK1 == break_num) {
TIMER_AFCTL1(timer_periph) |= break_src;
} else {
/* illegal parameters */
}
} else {
if(TIMER_BREAK0 == break_num) {
TIMER_AFCTL0(timer_periph) &= (~break_src);
} else if(TIMER_BREAK1 == break_num) {
TIMER_AFCTL1(timer_periph) &= (~break_src);
} else {
/* illegal parameters */
}
}
}
}
/*!
\brief configure TIMER break polarity
\param[in] timer_periph: TIMERx(x=0,7,14~16,40~44)
\param[in] break_num: TIMER BREAKx
only one parameter can be selected which is shown as below:
\arg TIMER_BREAK0: BREAK0 input signal, TIMERx(x=0,7,14~16,40~44)
\arg TIMER_BREAK1: BREAK1 input signal, TIMERx(x=0,7)
\param[in] break_src: break source
only one parameter can be selected which is shown as below:
\arg TIMER_BRKIN0: BRKIN0 alternate function input enable, TIMERx(x=0,7,14~16,40~44)
\arg TIMER_BRKIN1: BRKIN1 alternate function input enable, TIMERx(x=0,7)
\arg TIMER_BRKIN2: BRKIN2 alternate function input enable, TIMERx(x=0,7)
\arg TIMER_BRKCMP0: CMP0 input enable, TIMERx(x=0,7,14~16,40~44)
\arg TIMER_BRKCMP1: CMP1 input enable, TIMERx(x=0,7,14~16,40~44)
\param[in] bkinpolarity: break polarity
only one parameter can be selected which is shown as below:
TIMER_BRKIN_POLARITY_LOW: input signal will not be inverted
TIMER_BRKIN_POLARITY_HIGH: input signal will be inverted
\param[out] none
\retval none
*/
void timer_break_external_polarity_config(uint32_t timer_periph, uint16_t break_num, uint32_t break_src, uint16_t bkinpolarity)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0051U), ERR_PERIPH);
}else if(NOT_TIMER_BREAK_NUM(break_num)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0051U), ERR_PARAM_INVALID);
} else if(NOT_TIMER_BREAK_SRC(break_src)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0051U), ERR_PARAM_INVALID);
} else if(NOT_TIMER_BKINPOLARITY(bkinpolarity)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0051U), ERR_PARAM_INVALID);
} else
#endif /* FW_DEBUG_ERR_REPORT */
{
if(TIMER_BREAK0 == break_num) {
switch(break_src) {
case TIMER_BRKIN0:
TIMER_AFCTL0(timer_periph) &= (~(uint32_t)TIMER_BRKIN0P);
TIMER_AFCTL0(timer_periph) |= ((uint32_t)bkinpolarity << 16U);
break;
case TIMER_BRKIN1:
TIMER_AFCTL0(timer_periph) &= (~(uint32_t)TIMER_BRKIN1P);
TIMER_AFCTL0(timer_periph) |= ((uint32_t)bkinpolarity << 17U);
break;
case TIMER_BRKIN2:
TIMER_AFCTL0(timer_periph) &= (~(uint32_t)TIMER_BRKIN2P);
TIMER_AFCTL0(timer_periph) |= ((uint32_t)bkinpolarity << 18U);
break;
case TIMER_BRKCMP0:
TIMER_AFCTL0(timer_periph) &= (~(uint32_t)TIMER_BRKCMP0P);
TIMER_AFCTL0(timer_periph) |= ((uint32_t)bkinpolarity << 25U);
break;
case TIMER_BRKCMP1:
TIMER_AFCTL0(timer_periph) &= (~(uint32_t)TIMER_BRKCMP1P);
TIMER_AFCTL0(timer_periph) |= ((uint32_t)bkinpolarity << 26U);
break;
default:
break;
}
} else {
switch(break_src) {
case TIMER_BRKIN0:
TIMER_AFCTL1(timer_periph) &= (~(uint32_t)TIMER_BRKIN0P);
TIMER_AFCTL1(timer_periph) |= ((uint32_t)bkinpolarity << 16U);
break;
case TIMER_BRKIN1:
TIMER_AFCTL1(timer_periph) &= (~(uint32_t)TIMER_BRKIN1P);
TIMER_AFCTL1(timer_periph) |= ((uint32_t)bkinpolarity << 17U);
break;
case TIMER_BRKIN2:
TIMER_AFCTL1(timer_periph) &= (~(uint32_t)TIMER_BRKIN2P);
TIMER_AFCTL1(timer_periph) |= ((uint32_t)bkinpolarity << 18U);
break;
case TIMER_BRKCMP0:
TIMER_AFCTL1(timer_periph) &= (~(uint32_t)TIMER_BRKCMP0P);
TIMER_AFCTL1(timer_periph) |= ((uint32_t)bkinpolarity << 25U);
break;
case TIMER_BRKCMP1:
TIMER_AFCTL1(timer_periph) &= (~(uint32_t)TIMER_BRKCMP1P);
TIMER_AFCTL1(timer_periph) |= ((uint32_t)bkinpolarity << 26U);
break;
default:
break;
}
}
}
}
/*!
\brief configure TIMER break lock function
\param[in] timer_periph: TIMERx(x=0,7,14~16,40~44)
\param[in] break_num: TIMER BREAKx
only one parameter can be selected which is shown as below:
\arg TIMER_BREAK0: enable BREAK0 lock function, TIMERx(x=0,7,14~16,40~44)
\arg TIMER_BREAK1: enable BREAK1 lock function, TIMERx(x=0,7)
\param[in] newvalue: ENABLE or DISABLE
\param[out] none
\retval none
*/
void timer_break_lock_config(uint32_t timer_periph, uint16_t break_num, ControlStatus newvalue)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0052U), ERR_PERIPH);
}else if(NOT_TIMER_BREAK_NUM(break_num)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0052U), ERR_PARAM_INVALID);
} else
#endif /* FW_DEBUG_ERR_REPORT */
{
if(ENABLE == newvalue) {
if(TIMER_BREAK0 == break_num) {
TIMER_CCHP(timer_periph) |= (uint32_t)TIMER_CCHP_BRK0LK;
} else {
TIMER_CCHP(timer_periph) |= (uint32_t)TIMER_CCHP_BRK1LK;
}
} else {
if(TIMER_BREAK0 == break_num) {
TIMER_CCHP(timer_periph) &= (~(uint32_t)TIMER_CCHP_BRK0LK);
} else {
TIMER_CCHP(timer_periph) &= (~(uint32_t)TIMER_CCHP_BRK1LK);
}
}
}
}
/*!
\brief release the TIMER break lock function
\param[in] timer_periph: TIMERx(x=0,7,14~16,40~44)
\param[in] break_num: TIMER BREAKx
only one parameter can be selected which is shown as below:
\arg TIMER_BREAK0: release the BREAK0 lock function, TIMERx(x=0,7,14~16,40~44)
\arg TIMER_BREAK1: release the BREAK1 lock function, TIMERx(x=0,7)
\param[in] newvalue: ENABLE or DISABLE
\param[out] none
\retval none
*/
void timer_break_lock_release_config(uint32_t timer_periph, uint16_t break_num, ControlStatus newvalue)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0053U), ERR_PERIPH);
}else if(NOT_TIMER_BREAK_NUM(break_num)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0053U), ERR_PARAM_INVALID);
} else
#endif /* FW_DEBUG_ERR_REPORT */
{
if(ENABLE == newvalue) {
if(TIMER_BREAK0 == break_num) {
TIMER_CCHP(timer_periph) |= (uint32_t)TIMER_CCHP_BRK0REL;
} else {
TIMER_CCHP(timer_periph) |= (uint32_t)TIMER_CCHP_BRK1REL;
}
} else {
if(TIMER_BREAK0 == break_num) {
TIMER_CCHP(timer_periph) &= (~(uint32_t)TIMER_CCHP_BRK0REL);
} else {
TIMER_CCHP(timer_periph) &= (~(uint32_t)TIMER_CCHP_BRK1REL);
}
}
}
}
/*!
\brief configure the TIMER channel break function
\param[in] timer_periph: TIMERx(x=0,7)
\param[in] channel: TIMER channel
only one parameter can be selected which is shown as below:
\arg TIMER_CH_0: TIMER channel 0
\arg TIMER_CH_1: TIMER channel 1
\arg TIMER_CH_2: TIMER channel 2
\arg TIMER_CH_3: TIMER channel 3
\param[in] newvalue: ENABLE or DISABLE
\param[out] none
\retval none
*/
void timer_channel_break_control_config(uint32_t timer_periph, uint32_t channel, ControlStatus newvalue)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0054U), ERR_PERIPH);
}else if(NOT_TIMER_CHANNEL(channel)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0054U), ERR_PARAM_INVALID);
} else
#endif /* FW_DEBUG_ERR_REPORT */
{
if(ENABLE == newvalue) {
TIMER_CTL2(timer_periph) |= (uint32_t)(TIMER_CTL2_BRKENCH0 << channel);
} else {
TIMER_CTL2(timer_periph) &= (~(uint32_t)(TIMER_CTL2_BRKENCH0 << channel));
}
}
}
/*!
\brief configure the TIMER channel free dead time function
\param[in] timer_periph: TIMERx(x=0,7)
\param[in] channel: TIMER channel
only one parameter can be selected which is shown as below:
\arg TIMER_CH_0: TIMER channel 0
\arg TIMER_CH_1: TIMER channel 1
\arg TIMER_CH_2: TIMER channel 2
\arg TIMER_CH_3: TIMER channel 3
\param[in] newvalue: ENABLE or DISABLE
\param[out] none
\retval none
*/
void timer_channel_dead_time_config(uint32_t timer_periph, uint32_t channel, ControlStatus newvalue)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0055U), ERR_PERIPH);
}else if(NOT_TIMER_CHANNEL(channel)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0055U), ERR_PARAM_INVALID);
} else
#endif /* FW_DEBUG_ERR_REPORT */
{
if(ENABLE == newvalue) {
TIMER_CTL2(timer_periph) |= (uint32_t)(TIMER_CTL2_DTIENCH0 << channel);
} else {
TIMER_CTL2(timer_periph) &= (~(uint32_t)(TIMER_CTL2_DTIENCH0 << channel));
}
}
}
/*!
\brief initialize TIMER channel free complementary parameter struct with a default value
\param[in] freecompara: TIMER channel free complementary parameter struct
\param[out] none
\retval none
*/
void timer_free_complementary_struct_para_init(timer_free_complementary_parameter_struct *freecompara)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_VALID_POINTER(freecompara)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0056U), ERR_PARAM_POINTER);
} else
#endif /* FW_DEBUG_ERR_REPORT */
{
/* initialize the channel free complementary parameter struct member with the default value */
freecompara->freecomstate = TIMER_FCCHP_STATE_DISABLE;
freecompara->runoffstate = TIMER_ROS_STATE_DISABLE;
freecompara->ideloffstate = TIMER_IOS_STATE_DISABLE;
freecompara->deadtime = 0U;
}
}
/*!
\brief configure channel free complementary protection
\param[in] timer_periph: TIMERx(x=0,7)
\param[in] channel: TIMER channel
only one parameter can be selected which is shown as below:
\arg TIMER_CH_0: TIMER channel 0
\arg TIMER_CH_1: TIMER channel 1
\arg TIMER_CH_2: TIMER channel 2
\arg TIMER_CH_3: TIMER channel 3
\param[in] fcpara: TIMER channel free complementary parameter struct
freecomstate: TIMER_FCCHP_STATE_ENABLE, TIMER_FCCHP_STATE_DISABLE
runoffstate: TIMER_ROS_STATE_ENABLE, TIMER_ROS_STATE_DISABLE
ideloffstate: TIMER_IOS_STATE_ENABLE, TIMER_IOS_STATE_DISABLE
deadtime: 0~255
\param[out] none
\retval none
*/
void timer_channel_free_complementary_config(uint32_t timer_periph, uint16_t channel, timer_free_complementary_parameter_struct *fcpara)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0057U), ERR_PERIPH);
}else if(NOT_TIMER_CHANNEL(channel)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0057U), ERR_PARAM_INVALID);
} else if(NOT_VALID_POINTER(fcpara)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0057U), ERR_PARAM_POINTER);
} else
#endif /* FW_DEBUG_ERR_REPORT */
{
switch(channel) {
case TIMER_CH_0:
TIMER_FCCHP0(timer_periph) &= (~(uint32_t)(TIMER_FCCHP0_DTCFG | TIMER_FCCHP0_IOS | TIMER_FCCHP0_ROS | TIMER_FCCHP0_FCCHP0EN));
TIMER_FCCHP0(timer_periph) |= fcpara->deadtime;
TIMER_FCCHP0(timer_periph) |= fcpara->ideloffstate;
TIMER_FCCHP0(timer_periph) |= fcpara->runoffstate;
TIMER_FCCHP0(timer_periph) |= fcpara->freecomstate;
break;
case TIMER_CH_1:
TIMER_FCCHP1(timer_periph) &= (~(uint32_t)(TIMER_FCCHP1_DTCFG | TIMER_FCCHP1_IOS | TIMER_FCCHP1_ROS | TIMER_FCCHP1_FCCHP1EN));
TIMER_FCCHP1(timer_periph) |= fcpara->deadtime;
TIMER_FCCHP1(timer_periph) |= fcpara->ideloffstate;
TIMER_FCCHP1(timer_periph) |= fcpara->runoffstate;
TIMER_FCCHP1(timer_periph) |= fcpara->freecomstate;
break;
case TIMER_CH_2:
TIMER_FCCHP2(timer_periph) &= (~(uint32_t)(TIMER_FCCHP2_DTCFG | TIMER_FCCHP2_IOS | TIMER_FCCHP2_ROS | TIMER_FCCHP2_FCCHP2EN));
TIMER_FCCHP2(timer_periph) |= fcpara->deadtime;
TIMER_FCCHP2(timer_periph) |= fcpara->ideloffstate;
TIMER_FCCHP2(timer_periph) |= fcpara->runoffstate;
TIMER_FCCHP2(timer_periph) |= fcpara->freecomstate;
break;
case TIMER_CH_3:
TIMER_FCCHP3(timer_periph) &= (~(uint32_t)(TIMER_FCCHP3_DTCFG | TIMER_FCCHP3_IOS | TIMER_FCCHP3_ROS | TIMER_FCCHP3_FCCHP3EN));
TIMER_FCCHP3(timer_periph) |= fcpara->deadtime;
TIMER_FCCHP3(timer_periph) |= fcpara->ideloffstate;
TIMER_FCCHP3(timer_periph) |= fcpara->runoffstate;
TIMER_FCCHP3(timer_periph) |= fcpara->freecomstate;
break;
default:
break;
}
}
}
/*!
\brief configure quadrature decoder signal disconnection detection watchdog value
\param[in] timer_periph: TIMERx(x=0~4,7,22,23)
\param[in] value: watchdog counter period value, 0~0xFFFFFFFF
\param[out] none
\retval none
*/
void timer_watchdog_value_config(uint32_t timer_periph, uint32_t value)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0058U), ERR_PERIPH);
}else
#endif /* FW_DEBUG_ERR_REPORT */
{
TIMER_WDGPER(timer_periph) = value;
}
}
/*!
\brief read quadrature decoder signal disconnection detection watchdog value
\param[in] timer_periph: TIMERx(x=0~4,7,22,23)
\param[out] none
\retval watchdog counter period register value, 0~0xFFFFFFFF
*/
uint32_t timer_watchdog_value_read(uint32_t timer_periph)
{
uint32_t value = 0U;
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0059U), ERR_PERIPH);
}else
#endif /* FW_DEBUG_ERR_REPORT */
{
value = TIMER_WDGPER(timer_periph);
}
return value;
}
/*!
\brief configure quadrature decoder signal disconnection detection function
\param[in] timer_periph: TIMERx(x=0~4,7,22,23)
\param[in] newvalue: ENABLE or DISABLE
\param[out] none
\retval none
*/
void timer_decoder_disconnection_detection_config(uint32_t timer_periph, ControlStatus newvalue)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x005AU), ERR_PERIPH);
}else
#endif /* FW_DEBUG_ERR_REPORT */
{
if(ENABLE == newvalue) {
TIMER_CTL2(timer_periph) |= TIMER_DECDISCONNECTDEN;
} else {
TIMER_CTL2(timer_periph) &= (~TIMER_DECDISCONNECTDEN);
}
}
}
/*!
\brief configure quadrature decoder signal jump detection function
\param[in] timer_periph: TIMERx(x=0~4,7,22,23)
\param[in] newvalue: ENABLE or DISABLE
\param[out] none
\retval none
*/
void timer_decoder_jump_detection_config(uint32_t timer_periph, ControlStatus newvalue)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x005BU), ERR_PERIPH);
}else
#endif /* FW_DEBUG_ERR_REPORT */
{
if(ENABLE == newvalue) {
TIMER_CTL2(timer_periph) |= TIMER_DECJUMPDEN;
} else {
TIMER_CTL2(timer_periph) &= (~TIMER_DECJUMPDEN);
}
}
}
/*!
\brief configure the UPIF bit backup function
\param[in] timer_periph: TIMERx(x=0~7,14~16,22,23,40~44,50,51)
\param[in] newvalue: ENABLE or DISABLE
\param[out] none
\retval none
*/
void timer_upif_backup_config(uint32_t timer_periph, ControlStatus newvalue)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x005CU), ERR_PERIPH);
}else
#endif /* FW_DEBUG_ERR_REPORT */
{
if(ENABLE == newvalue) {
TIMER_CTL0(timer_periph) |= (uint32_t)TIMER_CTL0_UPIFBUEN;
} else {
TIMER_CTL0(timer_periph) &= (~(uint32_t)TIMER_CTL0_UPIFBUEN);
}
}
}
/*!
\brief get the UPIFBU bit in the TIMERx_CNT register
\param[in] timer_periph: TIMERx(x=0~7,14~16,22,23,40~44,50,51)
\param[out] none
\retval UPIFBUStatus: VALID_SET or VALID_RESET or INVALID
\ret VALID_SET: the UPIFBU is valid and value is 1
\ret VALID_RESET: the UPIFBU is valid and value is 0
\ret INVALID: the UPIFBU is invalid
*/
UPIFBUStatus timer_upifbu_bit_get(uint32_t timer_periph)
{
UPIFBUStatus status = INVALID;
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x005DU), ERR_PERIPH);
}else
#endif /* FW_DEBUG_ERR_REPORT */
{
if((TIMER_CTL0(timer_periph) & TIMER_CTL0_UPIFBUEN)) {
if((TIMER50 == timer_periph) || (TIMER51 == timer_periph)) {
if(TIMER_CNTH(timer_periph) & TIMER_CNT_UPIFBU) {
status = VALID_SET;
} else {
status = VALID_RESET;
}
} else {
if(TIMER_CNT(timer_periph) & TIMER_CNT_UPIFBU) {
status = VALID_SET;
} else {
status = VALID_RESET;
}
}
} else {
status = INVALID;
}
}
return status;
}
/*!
\brief get TIMER flags
\param[in] timer_periph: TIMERx(x=0~7,14~16,22,23,40~44,50,51)
\param[in] flag: the TIMER flags
only one parameter can be selected which is shown as below:
\arg TIMER_FLAG_UP: update flag, TIMERx(x=0~7,14~16,22,23,40~44,50,51)
\arg TIMER_FLAG_CH0: channel 0 capture or compare flag, TIMERx(x=0~4,7,14~16,22,23,40~44)
\arg TIMER_FLAG_CH1: channel 1 capture or compare flag, TIMERx(x=0~4,7,14,22,23,40~44)
\arg TIMER_FLAG_CH2: channel 2 capture or compare flag, TIMERx(x=0~4,7,22,23)
\arg TIMER_FLAG_CH3: channel 3 capture or compare flag, TIMERx(x=0~4,7,22,23)
\arg TIMER_FLAG_CMT: channel commutation flag, TIMERx(x=0,7,14~16,40~44)
\arg TIMER_FLAG_TRG: trigger flag, TIMERx(x=0~4,7,14,22,23,40~44)
\arg TIMER_FLAG_BRK0: BREAK0 flag, TIMERx(x=0,7,14~16,40~44)
\arg TIMER_FLAG_BRK1: BREAK1 flag, TIMERx(x=0,7)
\arg TIMER_FLAG_CH0O: channel 0 overcapture flag, TIMERx(x=0~4,7,14~16,22,23,40~44)
\arg TIMER_FLAG_CH1O: channel 1 overcapture flag, TIMERx(x=0~4,7,14,22,23,40~44)
\arg TIMER_FLAG_CH2O: channel 2 overcapture flag, TIMERx(x=0~4,7,22,23)
\arg TIMER_FLAG_CH3O: channel 3 overcapture flag, TIMERx(x=0~4,7,22,23)
\arg TIMER_FLAG_SYSB: system source break flag, TIMERx(x=0,7)
\arg TIMER_FLAG_DECJ: quadrature decoder signal jump flag, TIMERx(x=0~4,7,22,23)
\arg TIMER_FLAG_DECDIS: quadrature decoder signal disconnection flag, TIMERx(x=0~4,7,22,23)
\arg TIMER_FLAG_MCH0: multi mode channel 0 capture or compare flag, TIMERx(x=0,7,14~16,40~44)
\arg TIMER_FLAG_MCH1: multi mode channel 1 capture or compare flag, TIMERx(x=0,7)
\arg TIMER_FLAG_MCH2: multi mode channel 2 capture or compare flag, TIMERx(x=0,7)
\arg TIMER_FLAG_MCH3: multi mode channel 3 capture or compare flag, TIMERx(x=0,7)
\arg TIMER_FLAG_MCH0O: multi mode channel 0 overcapture flag, TIMERx(x=0,7,14~16,40~44)
\arg TIMER_FLAG_MCH1O: multi mode channel 1 overcapture flag, TIMERx(x=0,7)
\arg TIMER_FLAG_MCH2O: multi mode channel 2 overcapture flag, TIMERx(x=0,7)
\arg TIMER_FLAG_MCH3O: multi mode channel 3 overcapture flag, TIMERx(x=0,7)
\arg TIMER_FLAG_CH0COMADD: channel 0 additional compare flag, TIMERx(x=0~4,7,14,22,23)
\arg TIMER_FLAG_CH1COMADD: channel 1 additional compare flag, TIMERx(x=0~4,7,14,22,23)
\arg TIMER_FLAG_CH2COMADD: channel 2 additional compare flag, TIMERx(x=0~4,7,22,23)
\arg TIMER_FLAG_CH3COMADD: channel 3 additional compare flag, TIMERx(x=0~4,7,22,23)
\param[out] none
\retval FlagStatus: SET or RESET
*/
FlagStatus timer_flag_get(uint32_t timer_periph, uint32_t flag)
{
FlagStatus status = RESET;
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x005EU), ERR_PERIPH);
} else if(NOT_TIMER_FLAG(flag)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x005EU), ERR_PARAM_INVALID);
} else
#endif
{
if(RESET != (TIMER_INTF(timer_periph) & flag)) {
status = SET;
} else {
status = RESET;
}
}
return status;
}
/*!
\brief clear TIMER flags
\param[in] timer_periph: TIMERx(x=0~7,14~16,22,23,40~44,50,51)
\param[in] flag: the TIMER flags
only one parameters can be selected which are shown as below:
\arg TIMER_FLAG_UP: update flag, TIMERx(x=0~7,14~16,22,23,40~44,50,51)
\arg TIMER_FLAG_CH0: channel 0 capture or compare flag, TIMERx(x=0~4,7,14~16,22,23,40~44)
\arg TIMER_FLAG_CH1: channel 1 capture or compare flag, TIMERx(x=0~4,7,14,22,23,40~44)
\arg TIMER_FLAG_CH2: channel 2 capture or compare flag, TIMERx(x=0~4,7,22,23)
\arg TIMER_FLAG_CH3: channel 3 capture or compare flag, TIMERx(x=0~4,7,22,23)
\arg TIMER_FLAG_CMT: channel commutation flag, TIMERx(x=0,7,14~16,40~44)
\arg TIMER_FLAG_TRG: trigger flag, TIMERx(x=0~4,7,14,22,23,40~44)
\arg TIMER_FLAG_BRK0: BREAK0 flag, TIMERx(x=0,7,14~16,40~44)
\arg TIMER_FLAG_BRK1: BREAK1 flag, TIMERx(x=0,7)
\arg TIMER_FLAG_CH0O: channel 0 overcapture flag, TIMERx(x=0~4,7,14~16,22,23,40~44)
\arg TIMER_FLAG_CH1O: channel 1 overcapture flag, TIMERx(x=0~4,7,14,22,23,40~44)
\arg TIMER_FLAG_CH2O: channel 2 overcapture flag, TIMERx(x=0~4,7,22,23)
\arg TIMER_FLAG_CH3O: channel 3 overcapture flag, TIMERx(x=0~4,7,22,23)
\arg TIMER_FLAG_SYSB: system source break flag, TIMERx(x=0,7)
\arg TIMER_FLAG_DECJ: quadrature decoder signal jump flag, TIMERx(x=0~4,7,22,23)
\arg TIMER_FLAG_DECDIS: quadrature decoder signal disconnection flag, TIMERx(x=0~4,7,22,23)
\arg TIMER_FLAG_MCH0: multi mode channel 0 capture or compare flag, TIMERx(x=0,7,14~16,40~44)
\arg TIMER_FLAG_MCH1: multi mode channel 1 capture or compare flag, TIMERx(x=0,7)
\arg TIMER_FLAG_MCH2: multi mode channel 2 capture or compare flag, TIMERx(x=0,7)
\arg TIMER_FLAG_MCH3: multi mode channel 3 capture or compare flag, TIMERx(x=0,7)
\arg TIMER_FLAG_MCH0O: multi mode channel 0 overcapture flag, TIMERx(x=0,7,14~16,40~44)
\arg TIMER_FLAG_MCH1O: multi mode channel 1 overcapture flag, TIMERx(x=0,7)
\arg TIMER_FLAG_MCH2O: multi mode channel 2 overcapture flag, TIMERx(x=0,7)
\arg TIMER_FLAG_MCH3O: multi mode channel 3 overcapture flag, TIMERx(x=0,7)
\arg TIMER_FLAG_CH0COMADD: channel 0 additional compare flag, TIMERx(x=0~4,7,14,22,23)
\arg TIMER_FLAG_CH1COMADD: channel 1 additional compare flag, TIMERx(x=0~4,7,14,22,23)
\arg TIMER_FLAG_CH2COMADD: channel 2 additional compare flag, TIMERx(x=0~4,7,22,23)
\arg TIMER_FLAG_CH3COMADD: channel 3 additional compare flag, TIMERx(x=0~4,7,22,23)
\param[out] none
\retval none
*/
void timer_flag_clear(uint32_t timer_periph, uint32_t flag)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x005FU), ERR_PERIPH);
} else if(NOT_TIMER_FLAG(flag)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x005FU), ERR_PARAM_INVALID);
} else
#endif
{
TIMER_INTF(timer_periph) = (~(uint32_t)flag);
}
}
/*!
\brief enable the TIMER interrupt
\param[in] timer_periph: TIMERx(x=0~7,14~16,22,23,40~44,50,51)
\param[in] interrupt: timer interrupt source
only one parameters can be selected which are shown as below:
\arg TIMER_INT_UP: update interrupt, TIMERx(x=0~7,14~16,22,23,40~44,50,51)
\arg TIMER_INT_CH0: channel 0 capture or compare interrupt, TIMERx(x=0~4,7,14~16,22,23,40~44)
\arg TIMER_INT_CH1: channel 1 capture or compareinterrupt, TIMERx(x=0~4,7,14,22,23,40~44)
\arg TIMER_INT_CH2: channel 2 capture or compare interrupt, TIMERx(x=0~4,7,22,23)
\arg TIMER_INT_CH3: channel 3 capture or compare interrupt, TIMERx(x=0~4,7,22,23)
\arg TIMER_INT_CMT: channel commutation interrupt, TIMERx(x=0,7,14~16,40~44)
\arg TIMER_INT_TRG: trigger interrupt, TIMERx(x=0~4,7,14,22,23,40~44)
\arg TIMER_INT_BRK: break interrupt, TIMERx(x=0,7,14~16,40~44)
\arg TIMER_INT_DECJ: quadrature decoder signal jump interrupt, TIMERx(x=0~4,7,22,23)
\arg TIMER_INT_DECDIS: quadrature decoder signal disconnection interrupt, TIMERx(x=0~4,7,22,23)
\arg TIMER_INT_MCH0: multi mode channel 0 capture or compare interrupt, TIMERx(x=0,7,14~16,40~44)
\arg TIMER_INT_MCH1: multi mode channel 1 capture or compare interrupt, TIMERx(x=0,7)
\arg TIMER_INT_MCH2: multi mode channel 2 capture or compare interrupt, TIMERx(x=0,7)
\arg TIMER_INT_MCH3: multi mode channel 3 capture or compare interrupt, TIMERx(x=0,7)
\arg TIMER_INT_CH0COMADD: channel 0 additional compare interrupt, TIMERx(x=0~4,7,14,22,23,40~44)
\arg TIMER_INT_CH1COMADD: channel 1 additional compare interrupt, TIMERx(x=0~4,7,14,22,23,40~44)
\arg TIMER_INT_CH2COMADD: channel 2 additional compare interrupt, TIMERx(x=0~4,7,22,23)
\arg TIMER_INT_CH3COMADD: channel 3 additional compare interrupt, TIMERx(x=0~4,7,22,23)
\param[out] none
\retval none
*/
void timer_interrupt_enable(uint32_t timer_periph, uint32_t interrupt)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0060U), ERR_PERIPH);
} else if(NOT_TIMER_INTERRUPT(interrupt)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0060U), ERR_PARAM_INVALID);
} else
#endif
{
TIMER_DMAINTEN(timer_periph) |= (uint32_t) interrupt;
}
}
/*!
\brief disable the TIMER interrupt
\param[in] timer_periph: TIMERx(x=0~7,14~16,22,23,40~44,50,51)
\param[in] interrupt: timer interrupt source
only one parameters can be selected which are shown as below:
\arg TIMER_INT_UP: update interrupt, TIMERx(x=0~7,14~16,22,23,40~44,50,51)
\arg TIMER_INT_CH0: channel 0 capture or compare interrupt, TIMERx(x=0~4,7,14~16,22,23,40~44)
\arg TIMER_INT_CH1: channel 1 capture or compareinterrupt, TIMERx(x=0~4,7,14,22,23,40~44)
\arg TIMER_INT_CH2: channel 2 capture or compare interrupt, TIMERx(x=0~4,7,22,23)
\arg TIMER_INT_CH3: channel 3 capture or compare interrupt, TIMERx(x=0~4,7,22,23)
\arg TIMER_INT_CMT: channel commutation interrupt, TIMERx(x=0,7,14~16,40~44)
\arg TIMER_INT_TRG: trigger interrupt, TIMERx(x=0~4,7,14,22,23,40~44)
\arg TIMER_INT_BRK: break interrupt, TIMERx(x=0,7,14~16,40~44)
\arg TIMER_INT_DECJ: quadrature decoder signal jump interrupt, TIMERx(x=0~4,7,22,23)
\arg TIMER_INT_DECDIS: quadrature decoder signal disconnection interrupt, TIMERx(x=0~4,7,22,23)
\arg TIMER_INT_MCH0: multi mode channel 0 capture or compare interrupt, TIMERx(x=0,7,14~16,40~44)
\arg TIMER_INT_MCH1: multi mode channel 1 capture or compare interrupt, TIMERx(x=0,7)
\arg TIMER_INT_MCH2: multi mode channel 2 capture or compare interrupt, TIMERx(x=0,7)
\arg TIMER_INT_MCH3: multi mode channel 3 capture or compare interrupt, TIMERx(x=0,7)
\arg TIMER_INT_CH0COMADD: channel 0 additional compare interrupt, TIMERx(x=0~4,7,14,22,23,40~44)
\arg TIMER_INT_CH1COMADD: channel 1 additional compare interrupt, TIMERx(x=0~4,7,14,22,23,40~44)
\arg TIMER_INT_CH2COMADD: channel 2 additional compare interrupt, TIMERx(x=0~4,7,22,23)
\arg TIMER_INT_CH3COMADD: channel 3 additional compare interrupt, TIMERx(x=0~4,7,22,23)
\param[out] none
\retval none
*/
void timer_interrupt_disable(uint32_t timer_periph, uint32_t interrupt)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0061U), ERR_PERIPH);
} else if(NOT_TIMER_INTERRUPT(interrupt)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0061U), ERR_PARAM_INVALID);
} else
#endif
{
TIMER_DMAINTEN(timer_periph) &= (~(uint32_t)interrupt);
}
}
/*!
\brief get timer interrupt flags
\param[in] timer_periph: TIMERx(x=0~7,14~16,22,23,40~44,50,51)
\param[in] int_flag: the timer interrupt flags
only one parameter can be selected which is shown as below:
\arg TIMER_INT_FLAG_UP: update interrupt flag, TIMERx(x=0~7,14~16,22,23,40~44,50,51)
\arg TIMER_INT_FLAG_CH0: channel 0 capture or compare interrupt flag, TIMERx(x=0~4,7,14~16,22,23,40~44)
\arg TIMER_INT_FLAG_CH1: channel 1 capture or compare interrupt flag, TIMERx(x=0~4,7,14,22,23,40~44)
\arg TIMER_INT_FLAG_CH2: channel 2 capture or compare interrupt flag, TIMERx(x=0~4,7,22,23)
\arg TIMER_INT_FLAG_CH3: channel 3 capture or compare interrupt flag, TIMERx(x=0~4,7,22,23)
\arg TIMER_INT_FLAG_CMT: channel commutation interrupt flag, TIMERx(x=0,7,14~16,40~44)
\arg TIMER_INT_FLAG_TRG: trigger interrupt flag, TIMERx(x=0~4,7,14,22,23,40~44)
\arg TIMER_INT_FLAG_BRK0: BREAK0 interrupt flag, TIMERx(x=0,7,14~16,40~44)
\arg TIMER_INT_FLAG_BRK1: BREAK1 interrupt flag, TIMERx(x=0,7)
\arg TIMER_INT_FLAG_SYSB: system source break interrupt flag, TIMERx(x=0,7)
\arg TIMER_INT_FLAG_DECJ: quadrature decoder signal jump interrupt flag, TIMERx(x=0~4,7,22,23)
\arg TIMER_INT_FLAG_DECDIS: quadrature decoder signal disconnection interrupt flag, TIMERx(x=0~4,7,22,23)
\arg TIMER_INT_FLAG_MCH0: multi mode channel 0 capture or compare interrupt flag, TIMERx(x=0,7,14~16,40~44)
\arg TIMER_INT_FLAG_MCH1: multi mode channel 1 capture or compare interrupt flag, TIMERx(x=0,7)
\arg TIMER_INT_FLAG_MCH2: multi mode channel 2 capture or compare interrupt flag, TIMERx(x=0,7)
\arg TIMER_INT_FLAG_MCH3: multi mode channel 3 capture or compare interrupt flag, TIMERx(x=0,7)
\arg TIMER_INT_FLAG_CH0COMADD: channel 0 additional compare interrupt flag, TIMERx(x=0~4,7,14,22,23)
\arg TIMER_INT_FLAG_CH1COMADD: channel 1 additional compare interrupt flag, TIMERx(x=0~4,7,14,22,23)
\arg TIMER_INT_FLAG_CH2COMADD: channel 2 additional compare interrupt flag, TIMERx(x=0~4,7,22,23)
\arg TIMER_INT_FLAG_CH3COMADD: channel 3 additional compare interrupt flag, TIMERx(x=0~4,7,22,23)
\param[out] none
\retval FlagStatus: SET or RESET
*/
FlagStatus timer_interrupt_flag_get(uint32_t timer_periph, uint32_t int_flag)
{
uint32_t val;
FlagStatus status = RESET;
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0062U), ERR_PERIPH);
} else if(NOT_TIMER_INT_FLAG(int_flag)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0062U), ERR_PARAM_INVALID);
} else
#endif
{
if(TIMER_INT_FLAG_BRK1 == int_flag) {
val = (TIMER_DMAINTEN(timer_periph) & TIMER_DMAINTEN_BRKIE);
} else if(TIMER_INT_FLAG_SYSB == int_flag) {
val = (TIMER_DMAINTEN(timer_periph) & TIMER_DMAINTEN_BRKIE);
} else {
val = (TIMER_DMAINTEN(timer_periph) & int_flag);
}
if((RESET != (TIMER_INTF(timer_periph) & int_flag)) && (RESET != val)) {
status = SET;
} else {
status = RESET;
}
}
return status;
}
/*!
\brief clear TIMER interrupt flags
\param[in] timer_periph: TIMERx(x=0~7,14~16,22,23,40~44,50,51)
\param[in] int_flag: the timer interrupt flags
only one parameters can be selected which are shown as below:
\arg TIMER_INT_FLAG_UP: update interrupt flag, TIMERx(x=0~7,14~16,22,23,40~44,50,51)
\arg TIMER_INT_FLAG_CH0: channel 0 capture or compare interrupt flag, TIMERx(x=0~4,7,14~16,22,23,40~44)
\arg TIMER_INT_FLAG_CH1: channel 1 capture or compare interrupt flag, TIMERx(x=0~4,7,14,22,23,40~44)
\arg TIMER_INT_FLAG_CH2: channel 2 capture or compare interrupt flag, TIMERx(x=0~4,7,22,23)
\arg TIMER_INT_FLAG_CH3: channel 3 capture or compare interrupt flag, TIMERx(x=0~4,7,22,23)
\arg TIMER_INT_FLAG_CMT: channel commutation interrupt flag, TIMERx(x=0,7,14~16,40~44)
\arg TIMER_INT_FLAG_TRG: trigger interrupt flag, TIMERx(x=0~4,7,14,22,23,40~44)
\arg TIMER_INT_FLAG_BRK0: BREAK0 interrupt flag, TIMERx(x=0,7,14~16,40~44)
\arg TIMER_INT_FLAG_BRK1: BREAK1 interrupt flag, TIMERx(x=0,7)
\arg TIMER_INT_FLAG_SYSB: system source break interrupt flag, TIMERx(x=0,7)
\arg TIMER_INT_FLAG_DECJ: quadrature decoder signal jump interrupt flag, TIMERx(x=0~4,7,22,23)
\arg TIMER_INT_FLAG_DECDIS: quadrature decoder signal disconnection interrupt flag, TIMERx(x=0~4,7,22,23)
\arg TIMER_INT_FLAG_MCH0: multi mode channel 0 capture or compare interrupt flag, TIMERx(x=0,7,14~16,40~44)
\arg TIMER_INT_FLAG_MCH1: multi mode channel 1 capture or compare interrupt flag, TIMERx(x=0,7)
\arg TIMER_INT_FLAG_MCH2: multi mode channel 2 capture or compare interrupt flag, TIMERx(x=0,7)
\arg TIMER_INT_FLAG_MCH3: multi mode channel 3 capture or compare interrupt flag, TIMERx(x=0,7)
\arg TIMER_INT_FLAG_CH0COMADD: channel 0 additional compare interrupt flag, TIMERx(x=0~4,7,14,22,23)
\arg TIMER_INT_FLAG_CH1COMADD: channel 1 additional compare interrupt flag, TIMERx(x=0~4,7,14,22,23)
\arg TIMER_INT_FLAG_CH2COMADD: channel 2 additional compare interrupt flag, TIMERx(x=0~4,7,22,23)
\arg TIMER_INT_FLAG_CH3COMADD: channel 3 additional compare interrupt flag, TIMERx(x=0~4,7,22,23)
\param[out] none
\retval none
*/
void timer_interrupt_flag_clear(uint32_t timer_periph, uint32_t int_flag)
{
#ifdef FW_DEBUG_ERR_REPORT
if(NOT_TIMER_PERIPH(timer_periph)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0063U), ERR_PERIPH);
} else if(NOT_TIMER_INT_FLAG(int_flag)) {
fw_debug_report_err(TIMER_MODULE_ID, API_ID(0x0063U), ERR_PARAM_INVALID);
} else
#endif
{
TIMER_INTF(timer_periph) = (~(uint32_t)int_flag);
}
}