sc/828eco
1
0 Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

创建

Browse Source
This commit is contained in:
sc committed 2026-02-14 19:03:02 +08:00
commit da43152a7e
3380 files changed
+1128754
Download Patch File Download Diff File Expand all files Collapse all files

No files matched your search

828ECO/libraries/CMSIS/GD/GD32H75E/Include/gd32h75e.h
+405
View File
@@ -0,0 +1,405 @@
/*!
\file gd32h75e.h
\brief general definitions for GD32H75e
\version 2025-01-24, V1.1.0, firmware for GD32H75E
*/
/*
* Copyright (c) 2009-2021 Arm Limited. All rights reserved.
* Copyright (c) 2025, GigaDevice Semiconductor Inc.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
/* This file refers the CMSIS standard, some adjustments are made according to GigaDevice chips */
#ifndef GD32H75E_H
#define GD32H75E_H
#ifdef __cplusplus
extern "C" {
#endif
#if !defined (GD32H75E)
#error "Please select the target GD32H75E device used in your application (in gd32h75e.h file)"
#endif /* undefine GD32H75E tip */
/* define value of high speed crystal oscillator (HXTAL) in Hz */
#if !defined (HXTAL_VALUE)
#define HXTAL_VALUE ((uint32_t)25000000)
#endif /* high speed crystal oscillator value */
/* define startup timeout value of high speed crystal oscillator (HXTAL) */
#if !defined (HXTAL_STARTUP_TIMEOUT)
#define HXTAL_STARTUP_TIMEOUT ((uint16_t)0x0FFFF)
#endif /* high speed crystal oscillator startup timeout */
/* define value of internal 64MHz RC oscillator (IRC64M) in Hz */
#if !defined (IRC64M_VALUE)
#define IRC64M_VALUE ((uint32_t)64000000)
#endif /* internal 64MHz RC oscillator value */
/* define startup timeout value of internal 64MHz RC oscillator (IRC64M) */
#if !defined (IRC64M_STARTUP_TIMEOUT)
#define IRC64M_STARTUP_TIMEOUT ((uint16_t)0x0500)
#endif /* internal 64MHz RC oscillator startup timeout */
/* define value of Low Power Internal 4Mhz RC oscillator (LPIRC4M) in Hz */
#if !defined (LPIRC4M_VALUE)
#define LPIRC4M_VALUE ((uint32_t)4000000)
#endif /* Low Power Internal 4Mhz RC oscillator value */
/* define startup timeout value of internal Low Power Internal 4Mhz RC oscillator (LPIRC4M) */
#if !defined (LPIRC4M_STARTUP_TIMEOUT)
#define LPIRC4M_STARTUP_TIMEOUT ((uint16_t)0x0500)
#endif /* Low Power Internal 4Mhz RC oscillator startup timeout */
/* define value of internal 48MHz RC oscillator (IRC48M) in Hz */
#if !defined (IRC48M_VALUE)
#define IRC48M_VALUE ((uint32_t)48000000)
#endif /* internal 48MHz RC oscillator value */
/* define startup timeout value of internal 48MHz RC oscillator (IRC48M) */
#if !defined (IRC48M_STARTUP_TIMEOUT)
#define IRC48M_STARTUP_TIMEOUT ((uint16_t)0x0500)
#endif /* internal 48MHz RC oscillator startup timeout */
/* define value of internal 32KHz RC oscillator(IRC32K) in Hz */
#if !defined (IRC32K_VALUE)
#define IRC32K_VALUE ((uint32_t)32000)
#endif /* internal 32KHz RC oscillator value */
/* define startup timeout value of internal 32KHz RC oscillator (IRC32K) */
#if !defined (IRC32K_STARTUP_TIMEOUT)
#define IRC32K_STARTUP_TIMEOUT ((uint16_t)0x0500)
#endif /* internal 32KHz RC oscillator startup timeout */
/* define value of low speed crystal oscillator (LXTAL)in Hz */
#if !defined (LXTAL_VALUE)
#define LXTAL_VALUE ((uint32_t)32768)
#endif /* low speed crystal oscillator value */
/* define startup timeout value of low speed crystal oscillator (LXTAL) */
#if !defined (LXTAL_STARTUP_TIMEOUT)
#define LXTAL_STARTUP_TIMEOUT ((uint32_t)0x0FFFFFFF)
#endif /* low speed crystal oscillator startup timeout */
/* GD32H75E firmware library version number V1.1.0 */
#define __GD32H75E_STDPERIPH_VERSION_MAIN (0x01) /*!< [31:24] main version */
#define __GD32H75E_STDPERIPH_VERSION_SUB1 (0x01) /*!< [23:16] sub1 version */
#define __GD32H75E_STDPERIPH_VERSION_SUB2 (0x00) /*!< [15:8] sub2 version */
#define __GD32H75E_STDPERIPH_VERSION_RC (0x00) /*!< [7:0] release candidate */
#define __GD32H75E_STDPERIPH_VERSION ((__GD32H75E_STDPERIPH_VERSION_MAIN << 24)\
|(__GD32H75E_STDPERIPH_VERSION_SUB1 << 16)\
|(__GD32H75E_STDPERIPH_VERSION_SUB2 << 8)\
|(__GD32H75E_STDPERIPH_VERSION_RC))
/* configuration of the Cortex-M7 processor and core peripherals */
#define __CM7_REV 0x0102U /*!< Cortex-M7 revision r1p2 */
#define __MPU_PRESENT 1 /*!< CM7 provides an MPU */
#define __NVIC_PRIO_BITS 4 /*!< CM7 uses 4 Bits for the Priority Levels */
#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
#define __FPU_PRESENT 1 /*!< FPU present */
#define __ICACHE_PRESENT 1 /*!< CM7 instruction cache present */
#define __DCACHE_PRESENT 1 /*!< CM7 data cache present */
/* define interrupt number */
typedef enum IRQn {
/* Cortex-M7 processor exceptions numbers */
NonMaskableInt_IRQn = -14, /*!< non mask-able interrupt */
HardFault_IRQn = -13, /*!< hard-fault interrupt */
MemoryManagement_IRQn = -12, /*!< 4 Cortex-M7 memory management interrupt */
BusFault_IRQn = -11, /*!< 5 Cortex-M7 bus fault interrupt */
UsageFault_IRQn = -10, /*!< 6 Cortex-M7 usage fault interrupt */
SVCall_IRQn = -5, /*!< 11 Cortex-M7 sv call interrupt */
DebugMonitor_IRQn = -4, /*!< 12 Cortex-M7 debug monitor interrupt */
PendSV_IRQn = -2, /*!< 14 Cortex-M7 pend sv interrupt */
SysTick_IRQn = -1, /*!< 15 Cortex-M7 system tick interrupt */
/* interruput numbers */
WWDGT_IRQn = 0, /*!< window watchdog timer interrupt */
VAVD_LVD_VOVD_IRQn = 1, /*!< AVD_LVD_OVD_IRQn through EXTI line detect interrupt */
TAMPER_STAMP_LXTAL_IRQn = 2, /*!< RTC tamper and timestamp interrupt/LXTAL clock stuck interrupt */
RTC_WKUP_IRQn = 3, /*!< RTC Wakeup interrupt */
FMC_IRQn = 4, /*!< FMC interrupt */
RCU_IRQn = 5, /*!< RCU interrupt */
EXTI0_IRQn = 6, /*!< EXTI line 0 */
EXTI1_IRQn = 7, /*!< EXTI line 1 */
EXTI2_IRQn = 8, /*!< EXTI line 2 */
EXTI3_IRQn = 9, /*!< EXTI line 3 */
EXTI4_IRQn = 10, /*!< EXTI line 4 */
DMA0_Channel0_IRQn = 11, /*!< DMA0 channel 0 interrupt */
DMA0_Channel1_IRQn = 12, /*!< DMA0 channel 1 interrupt */
DMA0_Channel2_IRQn = 13, /*!< DMA0 channel 2 interrupt */
DMA0_Channel3_IRQn = 14, /*!< DMA0 channel 3 interrupt */
DMA0_Channel4_IRQn = 15, /*!< DMA0 channel 4 interrupt */
DMA0_Channel5_IRQn = 16, /*!< DMA0 channel 5 interrupt */
DMA0_Channel6_IRQn = 17, /*!< DMA0 channel 6 interrupt */
ADC0_1_IRQn = 18, /*!< ADC0 and ADC1 */
EXTI5_9_IRQn = 23, /*!< EXTI line 5 to 9 */
TIMER0_BRK_IRQn = 24, /*!< TIMER0 break interrupt */
TIMER0_UP_IRQn = 25, /*!< TIMER0 update interrupt */
TIMER0_TRG_CMT_IRQn = 26, /*!< TIMER0 trigger/commutation interrupt */
TIMER0_Channel_IRQn = 27, /*!< TIMER0 capture/compare interrupt */
TIMER1_IRQn = 28, /*!< TIMER1 interrupt */
TIMER2_IRQn = 29, /*!< TIMER2 interrupt */
TIMER3_IRQn = 30, /*!< TIMER3 interrupt */
I2C0_EV_IRQn = 31, /*!< I2C0 event interrupt */
I2C0_ER_IRQn = 32, /*!< I2C0 error interrupt */
I2C1_EV_IRQn = 33, /*!< I2C1 event interrupt */
I2C1_ER_IRQn = 34, /*!< I2C1 error interrupt */
SPI0_IRQn = 35, /*!< SPI0 interrupt */
SPI1_IRQn = 36, /*!< SPI1 interrupt */
USART0_IRQn = 37, /*!< USART0 global and wakeup interrupt */
USART1_IRQn = 38, /*!< USART1 global and wakeup interrupt */
USART2_IRQn = 39, /*!< USART2 global and wakeup interrupt */
EXTI10_15_IRQn = 40, /*!< EXTI line 10 to 15 */
RTC_Alarm_IRQn = 41, /*!< RTC Alarm interrupt */
TIMER7_BRK_IRQn = 43, /*!< TIMER7 Break global interrupt */
TIMER7_UP_IRQn = 44, /*!< TIMER7 Update global interrupt */
TIMER7_TRG_CMT_IRQn = 45, /*!< TIMER7 Trigger and Commutation global interrupt */
TIMER7_Channel_IRQn = 46, /*!< TIMER7 Capture Compare interrupt */
DMA0_Channel7_IRQn = 47, /*!< DMA0 channel 7 interrupt */
EXMC_IRQn = 48, /*!< EXMC interrupt */
SDIO0_IRQn = 49, /*!< SDMMC0 interrupt */
TIMER4_IRQn = 50, /*!< TIMER4 interrupt */
SPI2_IRQn = 51, /*!< SPI2 interrupt */
UART3_IRQn = 52, /*!< UART3 interrupt */
UART4_IRQn = 53, /*!< UART4 interrupt */
TIMER5_DAC_UDR_IRQn = 54, /*!< TIMER5 global interrupt and DAC1/DAC0 underrun */
TIMER6_IRQn = 55, /*!< TIMER6 interrupt */
DMA1_Channel0_IRQn = 56, /*!< DMA1 channel0 interrupt */
DMA1_Channel1_IRQn = 57, /*!< DMA1 channel1 interrupt */
DMA1_Channel2_IRQn = 58, /*!< DMA1 channel2 interrupt */
DMA1_Channel3_IRQn = 59, /*!< DMA1 channel3 interrupt */
DMA1_Channel4_IRQn = 60, /*!< DMA1 channel4 interrupt */
ENET0_IRQn = 61, /*!< ENET 0 interrupt */
ENET0_WKUP_IRQn = 62, /*!< ENET 0 wakeup through EXTI line interrupt */
DMA1_Channel5_IRQn = 68, /*!< DMA1 channel 5 interrupt */
DMA1_Channel6_IRQn = 69, /*!< DMA1 channel 6 interrupt */
DMA1_Channel7_IRQn = 70, /*!< DMA1 channel 7 interrupt */
USART5_IRQn = 71, /*!< UART5 global and wakeup interrupt */
I2C2_EV_IRQn = 72, /*!< I2C2 event interrupt */
I2C2_ER_IRQn = 73, /*!< I2C2 error interrupt */
USBHS0_EP1_OUT_IRQn = 74, /*!< USBHS0 endpoint 1 out interrupt */
USBHS0_EP1_IN_IRQn = 75, /*!< USBHS0 endpoint 1 in interrupt */
USBHS0_WKUP_IRQn = 76, /*!< USBHS0 wakeup through EXTI line interrupt */
USBHS0_IRQn = 77, /*!< USBHS0 interrupt */
DCI_IRQn = 78, /*!< DCI interrupt */
CAU_IRQn = 79, /*!< CAU interrupt */
HAU_TRNG_IRQn = 80, /*!< HAU and TRNG interrupt */
FPU_IRQn = 81, /*!< FPU interrupt */
UART6_IRQn = 82, /*!< UART6 interrupt */
UART7_IRQn = 83, /*!< UART7 interrupt */
SPI3_IRQn = 84, /*!< SPI3 interrupt */
SPI4_IRQn = 85, /*!< SPI4 interrupt */
SPI5_IRQn = 86, /*!< SPI5 interrupt */
SAI0_IRQn = 87, /*!< SAI0 interrupt */
TLI_IRQn = 88, /*!< TLI interrupt */
TLI_ER_IRQn = 89, /*!< TLI error interrupt */
IPA_IRQn = 90, /*!< IPA interrupt */
SAI1_IRQn = 91, /*!< SAI1 interrupt */
OSPI0_IRQn = 92, /*!< OSPI0 global interrupt */
I2C3_EV_IRQn = 95, /*!< I2C3 event interrupt */
I2C3_ER_IRQn = 96, /*!< I2C3 error interrupt */
RSPDIF_IRQn = 97, /*!< RSPDIF global interrupt */
DMAMUX_OVR_IRQn = 102, /*!< DMAMUX overrun interrupt */
HPDF_INT0_IRQn = 110, /*!< HPDF filiter 0 interrupt */
HPDF_INT1_IRQn = 111, /*!< HPDF filiter 1 interrupt */
HPDF_INT2_IRQn = 112, /*!< HPDF filiter 2 interrupt */
HPDF_INT3_IRQn = 113, /*!< HPDF filiter 3 interrupt */
SAI2_IRQn = 114, /*!< SAI2 interrupt */
TIMER14_IRQn = 116, /*!< TIMER14 interrupt */
TIMER15_IRQn = 117, /*!< TIMER15 interrupt */
TIMER16_IRQn = 118, /*!< TIMER16 interrupt */
MDIO_IRQn = 120, /*!< MDIO interrupt */
MDMA_IRQn = 122, /*!< MDMA interrupt */
SDIO1_IRQn = 124, /*!< SDIO1 interrupt */
HWSEM_IRQn = 125, /*!< HWSEM interrupt */
ADC2_IRQn = 127, /*!< ADC2 interrupt */
CMP0_1_IRQn = 137, /*!< CMP0 and CMP1 interrupt */
CTC_IRQn = 144, /*!< CTC interrupt */
RAMECCMU_IRQn = 145, /*!< RAMECCMU interrupt */
OSPI1_IRQn = 150, /*!< OSPI1 interrupt */
RTDEC0_IRQn = 151, /*!< RTDEC0 interrupt */
RTDEC1_IRQn = 152, /*!< RTDEC1 interrupt */
FAC_IRQn = 153, /*!< FAC interrupt */
TMU_IRQn = 154, /*!< TMU interrupt */
TIMER22_IRQn = 161, /*!< TIMER22 interrupt */
TIMER23_IRQn = 162, /*!< TIMER23 interrupt */
TIMER40_IRQn = 165, /*!< TIMER40 interrupt */
TIMER41_IRQn = 166, /*!< TIMER41 interrupt */
TIMER42_IRQn = 167, /*!< TIMER42 interrupt */
TIMER43_IRQn = 168, /*!< TIMER43 interrupt */
TIMER44_IRQn = 169, /*!< TIMER44 interrupt */
TIMER50_IRQn = 170, /*!< TIMER50 interrupt */
TIMER51_IRQn = 171, /*!< TIMER51 interrupt */
USBHS1_EP1_OUT_IRQn = 172, /*!< USBHS1 endpoint 1 out interrupt */
USBHS1_EP1_IN_IRQn = 173, /*!< USBHS1 endpoint 1 in interrupt */
USBHS1_WKUP_IRQn = 174, /*!< USBHS1 wakeup through EXTI line interrupt */
USBHS1_IRQn = 175, /*!< USBHS1 interrupt */
ENET1_IRQn = 176, /*!< ENET1 interrupt */
ENET1_WKUP_IRQn = 177, /*!< ENET1 wakeup through EXTI line interrupt */
CAN0_WKUP_IRQn = 179, /*!< CAN 0 wakeup through EXTI line interrupt */
CAN0_Message_IRQn = 180, /*!< CAN 0 message buffer interrupt */
CAN0_Busoff_IRQn = 181, /*!< CAN 0 bus off / bus off done interrupt */
CAN0_Error_IRQn = 182, /*!< CAN 0 error interrupt */
CAN0_FastError_IRQn = 183, /*!< CAN 0 error in fast transmission interrupt */
CAN0_TEC_IRQn = 184, /*!< CAN 0 transmit warning interrupt */
CAN0_REC_IRQn = 185, /*!< CAN 0 receive warning interrupt */
CAN1_WKUP_IRQn = 186, /*!< CAN 1 wakeup through EXTI line interrupt */
CAN1_Message_IRQn = 187, /*!< CAN 1 message buffer interrupt */
CAN1_Busoff_IRQn = 188, /*!< CAN 1 bus off / bus off done interrupt */
CAN1_Error_IRQn = 189, /*!< CAN 1 error interrupt */
CAN1_FastError_IRQn = 190, /*!< CAN 1 error in fast transmission interrupt */
CAN1_TEC_IRQn = 191, /*!< CAN 1 transmit warning interrupt */
CAN1_REC_IRQn = 192, /*!< CAN 1 receive warning interrupt */
CAN2_WKUP_IRQn = 193, /*!< CAN 2 wakeup through EXTI line interrupt */
CAN2_Message_IRQn = 194, /*!< CAN 2 message buffer interrupt */
CAN2_Busoff_IRQn = 195, /*!< CAN 2 bus off / bus off done interrupt */
CAN2_Error_IRQn = 196, /*!< CAN 2 error interrupt */
CAN2_FastError_IRQn = 197, /*!< CAN 2 error in fast transmission interrupt */
CAN2_TEC_IRQn = 198, /*!< CAN 2 transmit warning interrupt */
CAN2_REC_IRQn = 199, /*!< CAN 2 receive warning interrupt */
EFUSE_IRQn = 200, /*!< EFUSE interrupt */
I2C0_WKUP_IRQn = 201, /*!< I2C 0 wakeup through EXTI line interrupt */
I2C1_WKUP_IRQn = 202, /*!< I2C 1 wakeup through EXTI line interrupt */
I2C2_WKUP_IRQn = 203, /*!< I2C 2 wakeup through EXTI line interrupt */
I2C3_WKUP_IRQn = 204, /*!< I2C 3 wakeup through EXTI line interrupt */
LPDTS_IRQn = 205, /*!< LPDTS interrupt */
LPDTS_WKUP_IRQn = 206, /*!< LPDTS wakeup through EXTI line interrupt */
TIMER0_DEC_IRQn = 207, /*!< TIMER0 DEC interrupt */
TIMER7_DEC_IRQn = 208, /*!< TIMER7 DEC interrupt */
TIMER1_DEC_IRQn = 209, /*!< TIMER1 DEC interrupt */
TIMER2_DEC_IRQn = 210, /*!< TIMER2 DEC interrupt */
TIMER3_DEC_IRQn = 211, /*!< TIMER3 DEC interrupt */
TIMER4_DEC_IRQn = 212, /*!< TIMER4 DEC interrupt */
TIMER22_DEC_IRQn = 213, /*!< TIMER22 DEC interrupt */
TIMER23_DEC_IRQn = 214, /*!< TIMER23 DEC interrupt */
} IRQn_Type;
/* includes */
#include "core_cm7.h"
#include "system_gd32h75e.h"
#include <stdint.h>
#ifdef FW_DEBUG_ERR_REPORT
#include "gd32h75e_err_report.h"
#endif /* FW_DEBUG_ERR_REPORT */
/* enum definitions */
typedef enum {DISABLE = 0, ENABLE = !DISABLE} EventStatus, ControlStatus;
typedef enum {RESET = 0, SET = !RESET} FlagStatus;
typedef enum {ERROR = 0, SUCCESS = !ERROR} ErrStatus;
/* bit operations */
#define REG64(addr) (*(volatile uint64_t *)(uint32_t)(addr))
#define REG32(addr) (*(volatile uint32_t *)(uint32_t)(addr))
#define REG16(addr) (*(volatile uint16_t *)(uint32_t)(addr))
#define REG8(addr) (*(volatile uint8_t *)(uint32_t)(addr))
#define BIT(x) ((uint32_t)((uint32_t)0x01U << (x)))
#define BITS(start, end) ((0xFFFFFFFFUL << (start)) & (0xFFFFFFFFUL >> (31U - (uint32_t)(end))))
#define GET_BITS(regval, start, end) (((regval) & BITS((start),(end))) >> (start))
/* main flash and SRAM memory map */
#define FLASH_BASE ((uint32_t)0x08000000U) /*!< main FLASH base address */
#define SRAM_BASE ((uint32_t)0x24000000U) /*!< SRAM base address */
/* SRAM and peripheral base bit-band region */
#define SRAM_BB_BASE ((uint32_t)0x22000000U) /*!< SRAM bit-band base address */
#define PERIPH_BB_BASE ((uint32_t)0x42000000U) /*!< peripheral bit-band base address */
/* peripheral memory map */
#define APB1_BUS_BASE ((uint32_t)0x40000000U) /*!< apb1 base address */
#define APB2_BUS_BASE ((uint32_t)0x40010000U) /*!< apb2 base address */
#define APB3_BUS_BASE ((uint32_t)0x50000000U) /*!< apb3 base address */
#define APB4_BUS_BASE ((uint32_t)0x58000000U) /*!< apb4 base address */
#define AHB1_BUS_BASE ((uint32_t)0x40020000U) /*!< ahb1 base address */
#define AHB2_BUS_BASE ((uint32_t)0x48000000U) /*!< ahb2 base address */
#define AHB3_BUS_BASE ((uint32_t)0x51000000U) /*!< ahb3 base address */
#define AHB4_BUS_BASE ((uint32_t)0x58020000U) /*!< ahb4 base address */
/* advanced peripheral bus 1 memory map */
#define TIMER_BASE (APB1_BUS_BASE + 0x00000000U) /*!< TIMER base address */
#define SPI_BASE (APB1_BUS_BASE + 0x00003800U) /*!< SPI base address */
#define RSPDIF_BASE (APB1_BUS_BASE + 0x00004000U) /*!< RSPDIF base address */
#define USART_BASE (APB1_BUS_BASE + 0x00004400U) /*!< USART base address */
#define I2C_BASE (APB1_BUS_BASE + 0x00005400U) /*!< I2C base address */
#define DAC_BASE (APB1_BUS_BASE + 0x00007400U) /*!< DAC base address */
#define CTC_BASE (APB1_BUS_BASE + 0x00008400U) /*!< CTC base address */
#define MDIO_BASE (APB1_BUS_BASE + 0x00009400U) /*!< MDIO base address */
/* advanced peripheral bus 2 memory map */
#define ADC_BASE (APB2_BUS_BASE + 0x00002400U) /*!< ADC base address */
#define SAI_BASE (APB2_BUS_BASE + 0x00005800U) /*!< SAI base address */
#define HPDF_BASE (APB2_BUS_BASE + 0x00007000U) /*!< HPDF base address */
#define TRIGSEL_BASE (APB2_BUS_BASE + 0x00008400U) /*!< TRIGSEL base address */
#define EDOUT_BASE (APB2_BUS_BASE + 0x00008800U) /*!< EDOUT base address */
#define CAN_BASE (APB2_BUS_BASE + 0x0000A000U) /*!< CAN base address */
/* advanced peripheral bus 3 memory map */
#define TLI_BASE (APB3_BUS_BASE + 0x00001000U) /*!< TLI base address */
#define WWDGT_BASE (APB3_BUS_BASE + 0x00003000U) /*!< WWDGT base address */
/* advanced peripheral bus 4 memory map */
#define EXTI_BASE (APB4_BUS_BASE + 0x00000000U) /*!< EXTI base address */
#define SYSCFG_BASE (APB4_BUS_BASE + 0x00000400U) /*!< SYSCFG base address */
#define CMP_BASE (APB4_BUS_BASE + 0x00003800U) /*!< CMP base address */
#define VREF_BASE (APB4_BUS_BASE + 0x00003C00U) /*!< VREF base address */
#define RTC_BASE (APB4_BUS_BASE + 0x00004000U) /*!< CMP base address */
#define FWDGT_BASE (APB4_BUS_BASE + 0x00004800U) /*!< FWDGT base address */
#define PMU_BASE (APB4_BUS_BASE + 0x00005800U) /*!< PMU base address */
#define LPDTS_BASE (APB4_BUS_BASE + 0x00006800U) /*!< LPDTS base address */
/* advanced high performance bus 1 memory map */
#define DMA_BASE (AHB1_BUS_BASE + 0x00000000U) /*!< DMA base address */
#define DMAMUX_BASE (AHB1_BUS_BASE + 0x00000800U) /*!< DMAMUX base address */
#define EFUSE_BASE (AHB1_BUS_BASE + 0x00002800U) /*!< EFUSE base address */
#define ENET_BASE (AHB1_BUS_BASE + 0x00008000U) /*!< ENET base address */
#define USBHS_BASE (AHB1_BUS_BASE + 0x00020000U) /*!< USBHS base address */
/* advanced high performance bus 2 memory map */
#define DCI_BASE (AHB2_BUS_BASE + 0x00020000U) /*!< DCI base address */
#define CAU_BASE (AHB2_BUS_BASE + 0x00021000U) /*!< CAU base address */
#define HAU_BASE (AHB2_BUS_BASE + 0x00021400U) /*!< HAU base address */
#define TRNG_BASE (AHB2_BUS_BASE + 0x00021800U) /*!< TRNG base address */
#define SDIO_BASE (AHB2_BUS_BASE + 0x00022400U) /*!< SDIO base address */
#define CPDM_BASE (AHB2_BUS_BASE + 0x00022800U) /*!< CPDM base address */
#define RAMECCMU_BASE (AHB2_BUS_BASE + 0x00023000U) /*!< RAMECCMU base address */
#define TMU_BASE (AHB2_BUS_BASE + 0x00024400U) /*!< TMU base address */
#define FAC_BASE (AHB2_BUS_BASE + 0x00024800U) /*!< FAC base address */
/* advanced high performance bus 3 memory map */
#define AXIM_BASE (AHB3_BUS_BASE + 0x00000000U) /*!< AXIM base address */
#define MDMA_BASE (AHB3_BUS_BASE + 0x01000000U) /*!< MDMA base address */
#define IPA_BASE (AHB3_BUS_BASE + 0x01001000U) /*!< IPA base address */
#define FMC_BASE (AHB3_BUS_BASE + 0x01002000U) /*!< FMC base address */
#define FLEXRAMC_BASE (AHB3_BUS_BASE + 0x01003000U) /*!< FLEXRAMC base address */
#define EXMC_BASE (AHB3_BUS_BASE + 0x01004000U) /*!< EXMC base address */
#define OSPI_BASE (AHB3_BUS_BASE + 0x01005000U) /*!< OSPI base address */
#define OSPM_BASE (AHB3_BUS_BASE + 0x0100B400U) /*!< OSPM base address */
#define RTDEC_BASE (AHB3_BUS_BASE + 0x0100B800U) /*!< RTDEC base address */
/* advanced high performance bus 4 memory map */
#define GPIO_BASE (AHB4_BUS_BASE + 0x00000000U) /*!< GPIO base address */
#define RCU_BASE (AHB4_BUS_BASE + 0x00004400U) /*!< RCU base address */
#define CRC_BASE (AHB4_BUS_BASE + 0x00004C00U) /*!< CRC base address */
#define HWSEM_BASE (AHB4_BUS_BASE + 0x00006400U) /*!< HWSEM base address */
/* option byte and debug memory map */
#define OB_BASE ((uint32_t)0x1FFFF800U) /*!< OB base address */
#define DBG_BASE ((uint32_t)0xE00E1000U) /*!< DBG base address */
/* define marco USE_STDPERIPH_DRIVER */
#if !defined USE_STDPERIPH_DRIVER
#define USE_STDPERIPH_DRIVER
#endif
#ifdef USE_STDPERIPH_DRIVER
#include "gd32h75e_libopt.h"
#endif /* USE_STDPERIPH_DRIVER */
#ifdef __cplusplus
}
#endif
#endif /* GD32H75E_H */
828ECO/libraries/CMSIS/GD/GD32H75E/Include/gd32h75e_err_report.h
+111
View File
@@ -0,0 +1,111 @@
/*!
\file gd32h75e_report_err.h
\brief Reporting Error driver
\version 2025-01-24, V1.1.0, firmware for GD32H75E
*/
/*
Copyright (c) 2025, GigaDevice Semiconductor Inc.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this
list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice,
this list of conditions and the following disclaimer in the documentation
and/or other materials provided with the distribution.
3. Neither the name of the copyright holder nor the names of its contributors
may be used to endorse or promote products derived from this software without
specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
OF SUCH DAMAGE.
*/
#ifndef HSM_ERR_REPORT_H
#define HSM_ERR_REPORT_H
#include <stdint.h>
/* define the size of the error report buffer */
#define ERR_REPORT_BUFFER_SIZE 60U
/* define the unique identifier of peripherals */
#define SYSCFG_MODULE_ID ((uint8_t)0x01U) /*!< SYSCFG module ID */
#define RAMECCMU_MODULE_ID ((uint8_t)0x02U) /*!< RAMECCMU module ID */
#define FMC_MODULE_ID ((uint8_t)0x03U) /*!< FMC module ID */
#define EFUSE_MODULE_ID ((uint8_t)0x04U) /*!< EFUSE module ID */
#define PMU_MODULE_ID ((uint8_t)0x05U) /*!< PMU module ID */
#define RCU_MODULE_ID ((uint8_t)0x06U) /*!< RCU module ID */
#define CTC_MODULE_ID ((uint8_t)0x07U) /*!< CTC module ID */
#define EXTI_MODULE_ID ((uint8_t)0x08U) /*!< EXTI module ID */
#define TRIGSEL_MODULE_ID ((uint8_t)0x09U) /*!< TRIGSEL module ID */
#define GPIO_MODULE_ID ((uint8_t)0x0AU) /*!< GPIO module ID */
#define CRC_MODULE_ID ((uint8_t)0x0BU) /*!< CRC module ID */
#define TRNG_MODULE_ID ((uint8_t)0x0CU) /*!< TRNG module ID */
#define TMU_MODULE_ID ((uint8_t)0x0DU) /*!< TMU module ID */
#define DMA_DMAMUX_MODULE_ID ((uint8_t)0x0EU) /*!< DMA and DMAMUX module ID */
#define MDMA_MODULE_ID ((uint8_t)0x0FU) /*!< MDMA module ID */
#define DBG_MODULE_ID ((uint8_t)0x10U) /*!< DBG module ID */
#define ADC_MODULE_ID ((uint8_t)0x11U) /*!< ADC module ID */
#define DAC_MODULE_ID ((uint8_t)0x12U) /*!< DAC module ID */
#define FWDGT_MODULE_ID ((uint8_t)0x13U) /*!< FWDGT module ID */
#define WWDGT_MODULE_ID ((uint8_t)0x14U) /*!< WWDGT module ID */
#define RTC_MODULE_ID ((uint8_t)0x15U) /*!< RTC module ID */
#define TIMER_MODULE_ID ((uint8_t)0x16U) /*!< TIMER module ID */
#define USART_MODULE_ID ((uint8_t)0x17U) /*!< USART module ID */
#define I2C_MODULE_ID ((uint8_t)0x18U) /*!< I2C module ID */
#define SPI_MODULE_ID ((uint8_t)0x19U) /*!< SPI module ID */
#define OSPIM_MODULE_ID ((uint8_t)0x1AU) /*!< OSPIM module ID */
#define OSPI_MODULE_ID ((uint8_t)0x1BU) /*!< OSPI module ID */
#define EXMC_MODULE_ID ((uint8_t)0x1CU) /*!< EXMC module ID */
#define VREF_MODULE_ID ((uint8_t)0x1DU) /*!< VREF module ID */
#define LPDTS_MODULE_ID ((uint8_t)0x1EU) /*!< LPDTS module ID */
#define EDOUT_MODULE_ID ((uint8_t)0x1FU) /*!< EDOUT module ID */
#define CAN_MODULE_ID ((uint8_t)0x20U) /*!< CAN module ID */
#define CMP_MODULE_ID ((uint8_t)0x21U) /*!< CMP module ID */
#define HPDF_MODULE_ID ((uint8_t)0x22U) /*!< HPDF module ID */
#define FAC_MODULE_ID ((uint8_t)0x23U) /*!< FAC module ID */
#define MISC_MODULE_ID ((uint8_t)0x24U) /*!< MISC module ID */
#define USBHS_MODULE_ID ((uint8_t)0x25U) /*!< USBHS module ID */
#define ESC_MODULE_ID ((uint8_t)0x26U) /*!< ESC module ID */
/* define the unique identifier of error type */
#define ERR_PERIPH ((uint8_t)0x01U) /*!< peripheral error */
#define ERR_PARAM_POINTER ((uint8_t)0x02U) /*!< invalid pointer */
#define ERR_PARAM_OUT_OF_RANGE ((uint8_t)0x03U) /*!< out of range */
#define ERR_PARAM_INVALID ((uint8_t)0x04U) /*!< invalid parameter */
/* define the unique identifier of API */
#define API_ID(x) ((uint16_t)(x)) /*!< API ID */
/* definitions for parameter checking */
#define NOT_VALID_POINTER(x) ((void *) 0 == (x)) /*!< check the invalid pointer */
/* defining the structure to store the parameters of Report Error function */
typedef struct {
/* module ID where the error occurred */
uint16_t moduleid;
/* API ID associated with the error */
uint16_t apiid;
/* error ID indicating the specific error type */
uint8_t errid;
} err_report_struct;
/* declare external arrays and variables for error reporting */
extern err_report_struct err_report_buffer[ERR_REPORT_BUFFER_SIZE];
/* index to track the next available position in the error report buffer */
extern uint8_t err_report_buff_index;
/* reporting errors in debug mode */
void fw_debug_report_err(uint16_t moduleid, uint16_t apiid, uint8_t errid);
#endif /* ERR_REPORT_H */
828ECO/libraries/CMSIS/GD/GD32H75E/Include/gd32h75e_libopt.h
+76
View File
@@ -0,0 +1,76 @@
/*!
\file gd32h75e_libopt.h
\brief library optional for gd32h75e
\version 2025-08-07, V1.2.0, firmware for GD32H75E
*/
/*
Copyright (c) 2025, GigaDevice Semiconductor Inc.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this
list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice,
this list of conditions and the following disclaimer in the documentation
and/or other materials provided with the distribution.
3. Neither the name of the copyright holder nor the names of its contributors
may be used to endorse or promote products derived from this software without
specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
OF SUCH DAMAGE.
*/
#ifndef GD32H75E_LIBOPT_H
#define GD32H75E_LIBOPT_H
#include "gd32h75e_adc.h"
#include "gd32h75e_axiim.h"
#include "gd32h75e_can.h"
#include "gd32h75e_cmp.h"
#include "gd32h75e_crc.h"
#include "gd32h75e_ctc.h"
#include "gd32h75e_dac.h"
#include "gd32h75e_dbg.h"
#include "gd32h75e_dma.h"
#include "gd32h75e_edout.h"
#include "gd32h75e_efuse.h"
#include "gd32h75e_exmc.h"
#include "gd32h75e_exti.h"
#include "gd32h75e_fac.h"
#include "gd32h75e_fmc.h"
#include "gd32h75e_fwdgt.h"
#include "gd32h75e_gpio.h"
#include "gd32h75e_hpdf.h"
#include "gd32h75e_i2c.h"
#include "gd32h75e_lpdts.h"
#include "gd32h75e_mdma.h"
#include "gd32h75e_misc.h"
#include "gd32h75e_ospi.h"
#include "gd32h75e_ospim.h"
#include "gd32h75e_pmu.h"
#include "gd32h75e_rameccmu.h"
#include "gd32h75e_rcu.h"
#include "gd32h75e_rtc.h"
#include "gd32h75e_spi.h"
#include "gd32h75e_syscfg.h"
#include "gd32h75e_timer.h"
#include "gd32h75e_tmu.h"
#include "gd32h75e_trigsel.h"
#include "gd32h75e_trng.h"
#include "gd32h75e_usart.h"
#include "gd32h75e_vref.h"
#include "gd32h75e_wwdgt.h"
#endif /* GD32H75E_LIBOPT_H */
828ECO/libraries/CMSIS/GD/GD32H75E/Include/system_gd32h75e.h
+56
View File
@@ -0,0 +1,56 @@
/*!
\file system_gd32h75e.h
\brief CMSIS Cortex-M7 Device Peripheral Access Layer Header File for
gd32h75e Device Series
*/
/*
* Copyright (c) 2009-2021 Arm Limited. All rights reserved.
* Copyright (c) 2025, GigaDevice Semiconductor Inc.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
/* This file refers the CMSIS standard, some adjustments are made according to GigaDevice chips */
#ifndef SYSTEM_GD32H75E_H
#define SYSTEM_GD32H75E_H
#ifdef __cplusplus
extern "C" {
#endif
#include <stdint.h>
/* firmware version can be aquired by uncommenting the macro */
#define __FIRMWARE_VERSION_DEFINE
/* system clock frequency (core clock) */
extern uint32_t SystemCoreClock;
/* function declarations */
/* initialize the system and update the SystemCoreClock variable */
extern void SystemInit (void);
/* update the SystemCoreClock with current core clock retrieved from cpu registers */
extern void SystemCoreClockUpdate (void);
#ifdef __FIRMWARE_VERSION_DEFINE
/* get firmware version */
extern uint32_t gd32h75e_firmware_version_get(void);
#endif /* __FIRMWARE_VERSION_DEFINE */
#ifdef __cplusplus
}
#endif
#endif /* SYSTEM_GD32H75E_H */
828ECO/libraries/CMSIS/GD/GD32H75E/Source/GCC/startup_gd32h75e.s
+750
View File
@@ -0,0 +1,750 @@
.syntax unified
.cpu cortex-m7
.fpu softvfp
.thumb
.global Default_Handler
/* necessary symbols defined in linker script to initialize data */
.word _sidata
.word _sdata
.word _edata
.word _sbss
.word _ebss
.section .text.Reset_Handler
.weak Reset_Handler
.type Reset_Handler, %function
/* reset Handler */
Reset_Handler:
movs r1, #0
b DataInit
CopyData:
ldr r3, =_sidata
ldr r3, [r3, r1]
str r3, [r0, r1]
adds r1, r1, #4
DataInit:
ldr r0, =_sdata
ldr r3, =_edata
adds r2, r0, r1
cmp r2, r3
bcc CopyData
ldr r2, =_sbss
b Zerobss
FillZerobss:
movs r3, #0
str r3, [r2], #4
Zerobss:
ldr r3, = _ebss
cmp r2, r3
bcc FillZerobss
/* Call SystemInit function */
bl SystemInit
/* Call static constructors */
bl __libc_init_array
/*Call the main function */
bl entry
bx lr
.size Reset_Handler, .-Reset_Handler
.section .text.Default_Handler,"ax",%progbits
Default_Handler:
Infinite_Loop:
b Infinite_Loop
.size Default_Handler, .-Default_Handler
.section .vectors,"a",%progbits
.global __gVectors
__gVectors:
.word _sp /* Top of Stack */
.word Reset_Handler /* Reset Handler */
.word NMI_Handler /* NMI Handler */
.word HardFault_Handler /* Hard Fault Handler */
.word MemManage_Handler /* MPU Fault Handler */
.word BusFault_Handler /* Bus Fault Handler */
.word UsageFault_Handler /* Usage Fault Handler */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word SVC_Handler /* SVCall Handler */
.word DebugMon_Handler /* Debug Monitor Handler */
.word 0 /* Reserved */
.word PendSV_Handler /* PendSV Handler */
.word SysTick_Handler /* SysTick Handler */
/* External interrupts handler */
.word WWDGT_IRQHandler /* Vector Number 16,Window Watchdog Timer */
.word VAVD_LVD_VOVD_IRQHandler /* Vector Number 17,VAVD/LVD/VOVD through EXTI Line detect */
.word TAMPER_STAMP_LXTAL_IRQHandler /* Vector Number 18,RTC Tamper and TimeStamp through EXTI Line detect, LXTAL clock security system interrupt */
.word RTC_WKUP_IRQHandler /* Vector Number 19,RTC Wakeup from EXTI interrupt */
.word FMC_IRQHandler /* Vector Number 20,FMC global interrupt */
.word RCU_IRQHandler /* Vector Number 21,RCU global interrupt */
.word EXTI0_IRQHandler /* Vector Number 22,EXTI Line 0 */
.word EXTI1_IRQHandler /* Vector Number 23,EXTI Line 1 */
.word EXTI2_IRQHandler /* Vector Number 24,EXTI Line 2 */
.word EXTI3_IRQHandler /* Vector Number 25,EXTI Line 3 */
.word EXTI4_IRQHandler /* Vector Number 26,EXTI Line 4 */
.word DMA0_Channel0_IRQHandler /* Vector Number 27,DMA0 Channel 0 */
.word DMA0_Channel1_IRQHandler /* Vector Number 28,DMA0 Channel 1 */
.word DMA0_Channel2_IRQHandler /* Vector Number 29,DMA0 Channel 2 */
.word DMA0_Channel3_IRQHandler /* Vector Number 30,DMA0 Channel 3 */
.word DMA0_Channel4_IRQHandler /* Vector Number 31,DMA0 Channel 4 */
.word DMA0_Channel5_IRQHandler /* Vector Number 32,DMA0 Channel 5 */
.word DMA0_Channel6_IRQHandler /* Vector Number 33,DMA0 Channel 6 */
.word ADC0_1_IRQHandler /* Vector Number 34,ADC0 and ADC1 interrupt */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word EXTI5_9_IRQHandler /* Vector Number 39,EXTI5 to EXTI9 */
.word TIMER0_BRK_IRQHandler /* Vector Number 40,TIMER0 Break */
.word TIMER0_UP_IRQHandler /* Vector Number 41,TIMER0 Update */
.word TIMER0_TRG_CMT_IRQHandler /* Vector Number 42,TIMER0 Trigger and Commutation */
.word TIMER0_Channel_IRQHandler /* Vector Number 43,TIMER0 Capture Compare */
.word TIMER1_IRQHandler /* Vector Number 44,TIMER1 */
.word TIMER2_IRQHandler /* Vector Number 45,TIMER2 */
.word TIMER3_IRQHandler /* Vector Number 46,TIMER3 */
.word I2C0_EV_IRQHandler /* Vector Number 47,I2C0 Event */
.word I2C0_ER_IRQHandler /* Vector Number 48,I2C0 Error */
.word I2C1_EV_IRQHandler /* Vector Number 49,I2C1 Event */
.word I2C1_ER_IRQHandler /* Vector Number 50,I2C1 Error */
.word SPI0_IRQHandler /* Vector Number 51,SPI0 */
.word SPI1_IRQHandler /* Vector Number 52,SPI1 */
.word USART0_IRQHandler /* Vector Number 53,USART0 global and wakeup */
.word USART1_IRQHandler /* Vector Number 54,USART1 global and wakeup */
.word USART2_IRQHandler /* Vector Number 55,USART2 global and wakeup */
.word EXTI10_15_IRQHandler /* Vector Number 56,EXTI10 to EXTI15 */
.word RTC_Alarm_IRQHandler /* Vector Number 57,RTC Alarm */
.word 0 /* Reserved */
.word TIMER7_BRK_IRQHandler /* Vector Number 59,TIMER7 Break */
.word TIMER7_UP_IRQHandler /* Vector Number 60,TIMER7 Update */
.word TIMER7_TRG_CMT_IRQHandler /* Vector Number 61,TIMER7 Trigger and Commutation */
.word TIMER7_Channel_IRQHandler /* Vector Number 62,TIMER7 Channel Capture Compare */
.word DMA0_Channel7_IRQHandler /* Vector Number 63,DMA0 Channel 7 */
.word EXMC_IRQHandler /* Vector Number 64,EXMC */
.word 0 /* Reserved */
.word TIMER4_IRQHandler /* Vector Number 66,TIMER4 */
.word SPI2_IRQHandler /* Vector Number 67,SPI2 */
.word UART3_IRQHandler /* Vector Number 68,UART3 */
.word UART4_IRQHandler /* Vector Number 69,UART4 */
.word TIMER5_DAC_UDR_IRQHandler /* Vector Number 70,TIMER5 global interrupt and DAC1/DAC0 underrun error */
.word TIMER6_IRQHandler /* Vector Number 71,TIMER6 */
.word DMA1_Channel0_IRQHandler /* Vector Number 72,DMA1 Channel0 */
.word DMA1_Channel1_IRQHandler /* Vector Number 73,DMA1 Channel1 */
.word DMA1_Channel2_IRQHandler /* Vector Number 74,DMA1 Channel2 */
.word DMA1_Channel3_IRQHandler /* Vector Number 75,DMA1 Channel3 */
.word DMA1_Channel4_IRQHandler /* Vector Number 76,DMA1 Channel4 */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word DMA1_Channel5_IRQHandler /* Vector Number 84,DMA1 Channel5 */
.word DMA1_Channel6_IRQHandler /* Vector Number 85,DMA1 Channel6 */
.word DMA1_Channel7_IRQHandler /* Vector Number 86,DMA1 Channel7 */
.word USART5_IRQHandler /* Vector Number 87,USART5 global and wakeup */
.word I2C2_EV_IRQHandler /* Vector Number 88,I2C2 Event */
.word I2C2_ER_IRQHandler /* Vector Number 89,I2C2 Error */
.word USBHS0_EP1_OUT_IRQHandler /* Vector Number 90,USBHS0 Endpoint 1 Out */
.word USBHS0_EP1_IN_IRQHandler /* Vector Number 91,USBHS0 Endpoint 1 in */
.word USBHS0_WKUP_IRQHandler /* Vector Number 92,USBHS0 Wakeup through EXTI Line */
.word USBHS0_IRQHandler /* Vector Number 93,USBHS0 */
.word 0 /* Vector Number 94,Reserved */
.word 0 /* Vector Number 95,Reserved */
.word TRNG_IRQHandler /* Vector Number 96,TRNG */
.word FPU_IRQHandler /* Vector Number 97,FPU */
.word UART6_IRQHandler /* Vector Number 98,UART6 */
.word UART7_IRQHandler /* Vector Number 99,UART7 */
.word SPI3_IRQHandler /* Vector Number 100,SPI3 */
.word SPI4_IRQHandler /* Vector Number 101,SPI4 */
.word SPI5_IRQHandler /* Vector Number 102,SPI5 */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word OSPI0_IRQHandler /* Vector Number 108,OSPI0 */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word I2C3_EV_IRQHandler /* Vector Number 111,I2C3 Event */
.word I2C3_ER_IRQHandler /* Vector Number 112,I2C3 Error */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word DMAMUX_OVR_IRQHandler /* Vector Number 118,DMAMUX Overrun interrupt */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word HPDF_INT0_IRQHandler /* Vector Number 126,HPDF global interrupt 0 */
.word HPDF_INT1_IRQHandler /* Vector Number 127,HPDF global interrupt 1 */
.word HPDF_INT2_IRQHandler /* Vector Number 128,HPDF global interrupt 2 */
.word HPDF_INT3_IRQHandler /* Vector Number 129,HPDF global interrupt 3 */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word TIMER14_IRQHandler /* Vector Number 132,TIMER14 */
.word TIMER15_IRQHandler /* Vector Number 133,TIMER15 */
.word TIMER16_IRQHandler /* Vector Number 134,TIMER16 */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word MDMA_IRQHandler /* Vector Number 138,MDMA */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word ADC2_IRQHandler /* Vector Number 143,ADC2 */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word CMP0_1_IRQHandler /* Vector Number 153,CMP0 and CMP1 */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word CTC_IRQHandler /* Vector Number 160,Clock Recovery System */
.word RAMECCMU_IRQHandler /* Vector Number 161,RAMECCMU */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word OSPI1_IRQHandler /* Vector Number 166,OSPI1 */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word FAC_IRQHandler /* Vector Number 169,FAC */
.word TMU_IRQHandler /* Vector Number 170,TMU */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word TIMER22_IRQHandler /* Vector Number 177,TIMER22 */
.word TIMER23_IRQHandler /* Vector Number 178,TIMER23 */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word TIMER40_IRQHandler /* Vector Number 181,TIMER40 */
.word TIMER41_IRQHandler /* Vector Number 182,TIMER41 */
.word TIMER42_IRQHandler /* Vector Number 183,TIMER42 */
.word TIMER43_IRQHandler /* Vector Number 184,TIMER43 */
.word TIMER44_IRQHandler /* Vector Number 185,TIMER44 */
.word TIMER50_IRQHandler /* Vector Number 186,TIMER50 */
.word TIMER51_IRQHandler /* Vector Number 187,TIMER51 */
.word USBHS1_EP1_OUT_IRQHandler /* Vector Number 188,USBHS1 endpoint 1 out */
.word USBHS1_EP1_IN_IRQHandler /* Vector Number 189,USBHS1 endpoint 1 in */
.word USBHS1_WKUP_IRQHandler /* Vector Number 190,USBHS1 wakeup */
.word USBHS1_IRQHandler /* Vector Number 191,USBHS1 */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word CAN0_WKUP_IRQHandler /* Vector Number 195,CAN0 wakeup */
.word CAN0_Message_IRQHandler /* Vector Number 196,CAN0 interrupt for message buffer */
.word CAN0_Busoff_IRQHandler /* Vector Number 197,CAN0 interrupt for Bus off / Bus off done */
.word CAN0_Error_IRQHandler /* Vector Number 198,CAN0 interrupt for Error */
.word CAN0_FastError_IRQHandler /* Vector Number 199,CAN0 interrupt for Error in fast transmission */
.word CAN0_TEC_IRQHandler /* Vector Number 200,CAN0 interrupt for Transmit warning */
.word CAN0_REC_IRQHandler /* Vector Number 201,CAN0 interrupt for Receive warning */
.word CAN1_WKUP_IRQHandler /* Vector Number 202,CAN1 wakeup */
.word CAN1_Message_IRQHandler /* Vector Number 203,CAN1 interrupt for message buffer */
.word CAN1_Busoff_IRQHandler /* Vector Number 204,CAN1 interrupt for Bus off / Bus off done */
.word CAN1_Error_IRQHandler /* Vector Number 205,CAN1 interrupt for Error */
.word CAN1_FastError_IRQHandler /* Vector Number 206,CAN1 interrupt for Error in fast transmission */
.word CAN1_TEC_IRQHandler /* Vector Number 207,CAN1 interrupt for Transmit warning */
.word CAN1_REC_IRQHandler /* Vector Number 208,CAN1 interrupt for Receive warning */
.word CAN2_WKUP_IRQHandler /* Vector Number 209,CAN2 wakeup */
.word CAN2_Message_IRQHandler /* Vector Number 210,CAN2 interrupt for message buffer */
.word CAN2_Busoff_IRQHandler /* Vector Number 211,CAN2 interrupt for Bus off / Bus off done */
.word CAN2_Error_IRQHandler /* Vector Number 212,CAN2 interrupt for Error */
.word CAN2_FastError_IRQHandler /* Vector Number 213,CAN2 interrupt for Error in fast transmission */
.word CAN2_TEC_IRQHandler /* Vector Number 214,CAN2 interrupt for Transmit warning */
.word CAN2_REC_IRQHandler /* Vector Number 215,CAN2 interrupt for Receive warning */
.word EFUSE_IRQHandler /* Vector Number 216,EFUSE */
.word I2C0_WKUP_IRQHandler /* Vector Number 217,I2C0 wakeup */
.word I2C1_WKUP_IRQHandler /* Vector Number 218,I2C1 wakeup */
.word I2C2_WKUP_IRQHandler /* Vector Number 219,I2C2 wakeup */
.word I2C3_WKUP_IRQHandler /* Vector Number 220,I2C3 wakeup */
.word LPDTS_IRQHandler /* Vector Number 221,LPDTS */
.word LPDTS_WKUP_IRQHandler /* Vector Number 222,LPDTS wakeup */
.word TIMER0_DEC_IRQHandler /* Vector Number 223,TIMER0 DEC */
.word TIMER7_DEC_IRQHandler /* Vector Number 224,TIMER7 DEC */
.word TIMER1_DEC_IRQHandler /* Vector Number 225,TIMER1 DEC */
.word TIMER2_DEC_IRQHandler /* Vector Number 226,TIMER2 DEC */
.word TIMER3_DEC_IRQHandler /* Vector Number 227,TIMER3 DEC */
.word TIMER4_DEC_IRQHandler /* Vector Number 228,TIMER4 DEC */
.word TIMER22_DEC_IRQHandler /* Vector Number 229,TIMER22 DEC */
.word TIMER23_DEC_IRQHandler /* Vector Number 230,TIMER23 DEC */
.word 0 /* Reserved */
.word 0 /* Reserved */
.size __gVectors, . - __gVectors
.weak NMI_Handler
.thumb_set NMI_Handler,Default_Handler
.weak HardFault_Handler
.thumb_set HardFault_Handler,Default_Handler
.weak MemManage_Handler
.thumb_set MemManage_Handler,Default_Handler
.weak BusFault_Handler
.thumb_set BusFault_Handler,Default_Handler
.weak UsageFault_Handler
.thumb_set UsageFault_Handler,Default_Handler
.weak SVC_Handler
.thumb_set SVC_Handler,Default_Handler
.weak DebugMon_Handler
.thumb_set DebugMon_Handler,Default_Handler
.weak PendSV_Handler
.thumb_set PendSV_Handler,Default_Handler
.weak SysTick_Handler
.thumb_set SysTick_Handler,Default_Handler
.weak WWDGT_IRQHandler
.thumb_set WWDGT_IRQHandler,Default_Handler
.weak VAVD_LVD_VOVD_IRQHandler
.thumb_set VAVD_LVD_VOVD_IRQHandler,Default_Handler
.weak TAMPER_STAMP_LXTAL_IRQHandler
.thumb_set TAMPER_STAMP_LXTAL_IRQHandler,Default_Handler
.weak RTC_WKUP_IRQHandler
.thumb_set RTC_WKUP_IRQHandler,Default_Handler
.weak FMC_IRQHandler
.thumb_set FMC_IRQHandler,Default_Handler
.weak RCU_IRQHandler
.thumb_set RCU_IRQHandler,Default_Handler
.weak EXTI0_IRQHandler
.thumb_set EXTI0_IRQHandler,Default_Handler
.weak EXTI1_IRQHandler
.thumb_set EXTI1_IRQHandler,Default_Handler
.weak EXTI2_IRQHandler
.thumb_set EXTI2_IRQHandler,Default_Handler
.weak EXTI3_IRQHandler
.thumb_set EXTI3_IRQHandler,Default_Handler
.weak EXTI4_IRQHandler
.thumb_set EXTI4_IRQHandler,Default_Handler
.weak DMA0_Channel0_IRQHandler
.thumb_set DMA0_Channel0_IRQHandler,Default_Handler
.weak DMA0_Channel1_IRQHandler
.thumb_set DMA0_Channel1_IRQHandler,Default_Handler
.weak DMA0_Channel2_IRQHandler
.thumb_set DMA0_Channel2_IRQHandler,Default_Handler
.weak DMA0_Channel3_IRQHandler
.thumb_set DMA0_Channel3_IRQHandler,Default_Handler
.weak DMA0_Channel4_IRQHandler
.thumb_set DMA0_Channel4_IRQHandler,Default_Handler
.weak DMA0_Channel5_IRQHandler
.thumb_set DMA0_Channel5_IRQHandler,Default_Handler
.weak DMA0_Channel6_IRQHandler
.thumb_set DMA0_Channel6_IRQHandler,Default_Handler
.weak ADC0_1_IRQHandler
.thumb_set ADC0_1_IRQHandler,Default_Handler
.weak EXTI5_9_IRQHandler
.thumb_set EXTI5_9_IRQHandler,Default_Handler
.weak TIMER0_BRK_IRQHandler
.thumb_set TIMER0_BRK_IRQHandler,Default_Handler
.weak TIMER0_UP_IRQHandler
.thumb_set TIMER0_UP_IRQHandler,Default_Handler
.weak TIMER0_TRG_CMT_IRQHandler
.thumb_set TIMER0_TRG_CMT_IRQHandler,Default_Handler
.weak TIMER0_Channel_IRQHandler
.thumb_set TIMER0_Channel_IRQHandler,Default_Handler
.weak TIMER1_IRQHandler
.thumb_set TIMER1_IRQHandler,Default_Handler
.weak TIMER2_IRQHandler
.thumb_set TIMER2_IRQHandler,Default_Handler
.weak TIMER3_IRQHandler
.thumb_set TIMER3_IRQHandler,Default_Handler
.weak I2C0_EV_IRQHandler
.thumb_set I2C0_EV_IRQHandler,Default_Handler
.weak I2C0_ER_IRQHandler
.thumb_set I2C0_ER_IRQHandler,Default_Handler
.weak I2C1_EV_IRQHandler
.thumb_set I2C1_EV_IRQHandler,Default_Handler
.weak I2C1_ER_IRQHandler
.thumb_set I2C1_ER_IRQHandler,Default_Handler
.weak SPI0_IRQHandler
.thumb_set SPI0_IRQHandler,Default_Handler
.weak SPI1_IRQHandler
.thumb_set SPI1_IRQHandler,Default_Handler
.weak USART0_IRQHandler
.thumb_set USART0_IRQHandler,Default_Handler
.weak USART1_IRQHandler
.thumb_set USART1_IRQHandler,Default_Handler
.weak USART2_IRQHandler
.thumb_set USART2_IRQHandler,Default_Handler
.weak EXTI10_15_IRQHandler
.thumb_set EXTI10_15_IRQHandler,Default_Handler
.weak RTC_Alarm_IRQHandler
.thumb_set RTC_Alarm_IRQHandler,Default_Handler
.weak TIMER7_BRK_IRQHandler
.thumb_set TIMER7_BRK_IRQHandler,Default_Handler
.weak TIMER7_UP_IRQHandler
.thumb_set TIMER7_UP_IRQHandler,Default_Handler
.weak TIMER7_TRG_CMT_IRQHandler
.thumb_set TIMER7_TRG_CMT_IRQHandler,Default_Handler
.weak TIMER7_Channel_IRQHandler
.thumb_set TIMER7_Channel_IRQHandler,Default_Handler
.weak DMA0_Channel7_IRQHandler
.thumb_set DMA0_Channel7_IRQHandler,Default_Handler
.weak EXMC_IRQHandler
.thumb_set EXMC_IRQHandler,Default_Handler
.weak TIMER4_IRQHandler
.thumb_set TIMER4_IRQHandler,Default_Handler
.weak SPI2_IRQHandler
.thumb_set SPI2_IRQHandler,Default_Handler
.weak UART3_IRQHandler
.thumb_set UART3_IRQHandler,Default_Handler
.weak UART4_IRQHandler
.thumb_set UART4_IRQHandler,Default_Handler
.weak TIMER5_DAC_UDR_IRQHandler
.thumb_set TIMER5_DAC_UDR_IRQHandler,Default_Handler
.weak TIMER6_IRQHandler
.thumb_set TIMER6_IRQHandler,Default_Handler
.weak DMA1_Channel0_IRQHandler
.thumb_set DMA1_Channel0_IRQHandler,Default_Handler
.weak DMA1_Channel1_IRQHandler
.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
.weak DMA1_Channel2_IRQHandler
.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
.weak DMA1_Channel3_IRQHandler
.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
.weak DMA1_Channel4_IRQHandler
.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
.weak DMA1_Channel5_IRQHandler
.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
.weak DMA1_Channel6_IRQHandler
.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
.weak DMA1_Channel7_IRQHandler
.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
.weak USART5_IRQHandler
.thumb_set USART5_IRQHandler,Default_Handler
.weak I2C2_EV_IRQHandler
.thumb_set I2C2_EV_IRQHandler,Default_Handler
.weak I2C2_ER_IRQHandler
.thumb_set I2C2_ER_IRQHandler,Default_Handler
.weak USBHS0_EP1_OUT_IRQHandler
.thumb_set USBHS0_EP1_OUT_IRQHandler,Default_Handler
.weak USBHS0_EP1_IN_IRQHandler
.thumb_set USBHS0_EP1_IN_IRQHandler,Default_Handler
.weak USBHS0_WKUP_IRQHandler
.thumb_set USBHS0_WKUP_IRQHandler,Default_Handler
.weak USBHS0_IRQHandler
.thumb_set USBHS0_IRQHandler,Default_Handler
.weak TRNG_IRQHandler
.thumb_set TRNG_IRQHandler,Default_Handler
.weak FPU_IRQHandler
.thumb_set FPU_IRQHandler,Default_Handler
.weak UART6_IRQHandler
.thumb_set UART6_IRQHandler,Default_Handler
.weak UART7_IRQHandler
.thumb_set UART7_IRQHandler,Default_Handler
.weak SPI3_IRQHandler
.thumb_set SPI3_IRQHandler,Default_Handler
.weak SPI4_IRQHandler
.thumb_set SPI4_IRQHandler,Default_Handler
.weak SPI5_IRQHandler
.thumb_set SPI5_IRQHandler,Default_Handler
.weak OSPI0_IRQHandler
.thumb_set OSPI0_IRQHandler,Default_Handler
.weak I2C3_EV_IRQHandler
.thumb_set I2C3_EV_IRQHandler,Default_Handler
.weak I2C3_ER_IRQHandler
.thumb_set I2C3_ER_IRQHandler,Default_Handler
.weak DMAMUX_OVR_IRQHandler
.thumb_set DMAMUX_OVR_IRQHandler,Default_Handler
.weak HPDF_INT0_IRQHandler
.thumb_set HPDF_INT0_IRQHandler,Default_Handler
.weak HPDF_INT1_IRQHandler
.thumb_set HPDF_INT1_IRQHandler,Default_Handler
.weak HPDF_INT2_IRQHandler
.thumb_set HPDF_INT2_IRQHandler,Default_Handler
.weak HPDF_INT3_IRQHandler
.thumb_set HPDF_INT3_IRQHandler,Default_Handler
.weak TIMER14_IRQHandler
.thumb_set TIMER14_IRQHandler,Default_Handler
.weak TIMER15_IRQHandler
.thumb_set TIMER15_IRQHandler,Default_Handler
.weak TIMER16_IRQHandler
.thumb_set TIMER16_IRQHandler,Default_Handler
.weak MDMA_IRQHandler
.thumb_set MDMA_IRQHandler,Default_Handler
.weak ADC2_IRQHandler
.thumb_set ADC2_IRQHandler,Default_Handler
.weak CMP0_1_IRQHandler
.thumb_set CMP0_1_IRQHandler,Default_Handler
.weak CTC_IRQHandler
.thumb_set CTC_IRQHandler,Default_Handler
.weak RAMECCMU_IRQHandler
.thumb_set RAMECCMU_IRQHandler,Default_Handler
.weak OSPI1_IRQHandler
.thumb_set OSPI1_IRQHandler,Default_Handler
.weak FAC_IRQHandler
.thumb_set FAC_IRQHandler,Default_Handler
.weak TMU_IRQHandler
.thumb_set TMU_IRQHandler,Default_Handler
.weak TIMER22_IRQHandler
.thumb_set TIMER22_IRQHandler,Default_Handler
.weak TIMER23_IRQHandler
.thumb_set TIMER23_IRQHandler,Default_Handler
.weak TIMER40_IRQHandler
.thumb_set TIMER40_IRQHandler,Default_Handler
.weak TIMER41_IRQHandler
.thumb_set TIMER41_IRQHandler,Default_Handler
.weak TIMER42_IRQHandler
.thumb_set TIMER42_IRQHandler,Default_Handler
.weak TIMER43_IRQHandler
.thumb_set TIMER43_IRQHandler,Default_Handler
.weak TIMER44_IRQHandler
.thumb_set TIMER44_IRQHandler,Default_Handler
.weak TIMER50_IRQHandler
.thumb_set TIMER50_IRQHandler,Default_Handler
.weak TIMER51_IRQHandler
.thumb_set TIMER51_IRQHandler,Default_Handler
.weak USBHS1_EP1_OUT_IRQHandler
.thumb_set USBHS1_EP1_OUT_IRQHandler,Default_Handler
.weak USBHS1_EP1_IN_IRQHandler
.thumb_set USBHS1_EP1_IN_IRQHandler,Default_Handler
.weak USBHS1_WKUP_IRQHandler
.thumb_set USBHS1_WKUP_IRQHandler,Default_Handler
.weak USBHS1_IRQHandler
.thumb_set USBHS1_IRQHandler,Default_Handler
.weak CAN0_WKUP_IRQHandler
.thumb_set CAN0_WKUP_IRQHandler,Default_Handler
.weak CAN0_Message_IRQHandler
.thumb_set CAN0_Message_IRQHandler,Default_Handler
.weak CAN0_Busoff_IRQHandler
.thumb_set CAN0_Busoff_IRQHandler,Default_Handler
.weak CAN0_Error_IRQHandler
.thumb_set CAN0_Error_IRQHandler,Default_Handler
.weak CAN0_FastError_IRQHandler
.thumb_set CAN0_FastError_IRQHandler,Default_Handler
.weak CAN0_TEC_IRQHandler
.thumb_set CAN0_TEC_IRQHandler,Default_Handler
.weak CAN0_REC_IRQHandler
.thumb_set CAN0_REC_IRQHandler,Default_Handler
.weak CAN1_WKUP_IRQHandler
.thumb_set CAN1_WKUP_IRQHandler,Default_Handler
.weak CAN1_Message_IRQHandler
.thumb_set CAN1_Message_IRQHandler,Default_Handler
.weak CAN1_Busoff_IRQHandler
.thumb_set CAN1_Busoff_IRQHandler,Default_Handler
.weak CAN1_Error_IRQHandler
.thumb_set CAN1_Error_IRQHandler,Default_Handler
.weak CAN1_FastError_IRQHandler
.thumb_set CAN1_FastError_IRQHandler,Default_Handler
.weak CAN1_TEC_IRQHandler
.thumb_set CAN1_TEC_IRQHandler,Default_Handler
.weak CAN1_REC_IRQHandler
.thumb_set CAN1_REC_IRQHandler,Default_Handler
.weak CAN2_WKUP_IRQHandler
.thumb_set CAN2_WKUP_IRQHandler,Default_Handler
.weak CAN2_Message_IRQHandler
.thumb_set CAN2_Message_IRQHandler,Default_Handler
.weak CAN2_Busoff_IRQHandler
.thumb_set CAN2_Busoff_IRQHandler,Default_Handler
.weak CAN2_Error_IRQHandler
.thumb_set CAN2_Error_IRQHandler,Default_Handler
.weak CAN2_FastError_IRQHandler
.thumb_set CAN2_FastError_IRQHandler,Default_Handler
.weak CAN2_TEC_IRQHandler
.thumb_set CAN2_TEC_IRQHandler,Default_Handler
.weak CAN2_REC_IRQHandler
.thumb_set CAN2_REC_IRQHandler,Default_Handler
.weak EFUSE_IRQHandler
.thumb_set EFUSE_IRQHandler,Default_Handler
.weak I2C0_WKUP_IRQHandler
.thumb_set I2C0_WKUP_IRQHandler,Default_Handler
.weak I2C1_WKUP_IRQHandler
.thumb_set I2C1_WKUP_IRQHandler,Default_Handler
.weak I2C2_WKUP_IRQHandler
.thumb_set I2C2_WKUP_IRQHandler,Default_Handler
.weak I2C3_WKUP_IRQHandler
.thumb_set I2C3_WKUP_IRQHandler,Default_Handler
.weak LPDTS_IRQHandler
.thumb_set LPDTS_IRQHandler,Default_Handler
.weak LPDTS_WKUP_IRQHandler
.thumb_set LPDTS_WKUP_IRQHandler,Default_Handler
.weak TIMER0_DEC_IRQHandler
.thumb_set TIMER0_DEC_IRQHandler,Default_Handler
.weak TIMER7_DEC_IRQHandler
.thumb_set TIMER7_DEC_IRQHandler,Default_Handler
.weak TIMER1_DEC_IRQHandler
.thumb_set TIMER1_DEC_IRQHandler,Default_Handler
.weak TIMER2_DEC_IRQHandler
.thumb_set TIMER2_DEC_IRQHandler,Default_Handler
.weak TIMER3_DEC_IRQHandler
.thumb_set TIMER3_DEC_IRQHandler,Default_Handler
.weak TIMER4_DEC_IRQHandler
.thumb_set TIMER4_DEC_IRQHandler,Default_Handler
.weak TIMER22_DEC_IRQHandler
.thumb_set TIMER22_DEC_IRQHandler,Default_Handler
.weak TIMER23_DEC_IRQHandler
.thumb_set TIMER23_DEC_IRQHandler,Default_Handler
828ECO/libraries/CMSIS/GD/GD32H75E/Source/gd32h75e_err_report.c
+61
View File
@@ -0,0 +1,61 @@
/*!
\file gd32h75e_report_err.c
\brief Reporting Error driver
\version 2025-01-24, V1.1.0, firmware for GD32H75E
*/
/*
Copyright (c) 2025, GigaDevice Semiconductor Inc.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this
list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice,
this list of conditions and the following disclaimer in the documentation
and/or other materials provided with the distribution.
3. Neither the name of the copyright holder nor the names of its contributors
may be used to endorse or promote products derived from this software without
specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
OF SUCH DAMAGE.
*/
#include "gd32h75e_err_report.h"
/* initialize the error report buffer and index */
err_report_struct err_report_buffer[ERR_REPORT_BUFFER_SIZE];
uint8_t err_report_buff_index = 0x00U;
/*!
\brief reporting error in debug mode
\param[in] moduleid: module ID where the error occurred
\param[in] apiid: API ID associated with the error
\param[in] errid: error ID indicating the specific error type
\param[out] err_report_buffer: stores the id of the error type
\retval none
*/
void fw_debug_report_err(uint16_t moduleid, uint16_t apiid, uint8_t errid)
{
err_report_struct *debug_report_err_buffer;
if(err_report_buff_index < ERR_REPORT_BUFFER_SIZE) {
debug_report_err_buffer = &err_report_buffer[err_report_buff_index++];
debug_report_err_buffer->moduleid = moduleid;
debug_report_err_buffer->apiid = apiid;
debug_report_err_buffer->errid = errid;
} else {
/* illegal parameters */
}
}
828ECO/libraries/CMSIS/GD/GD32H75E/Source/system_gd32h75e.c
+877
View File
@@ -0,0 +1,877 @@
/*!
\file system_gd32h75e.c
\brief CMSIS Cortex-M7 Device Peripheral Access Layer Source File for
gd32h75e Device Series
*/
/*
* Copyright (c) 2009-2021 Arm Limited. All rights reserved.
* Copyright (c) 2025, GigaDevice Semiconductor Inc.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
/* This file refers the CMSIS standard, some adjustments are made according to GigaDevice chips */
#include "gd32h75e.h"
/* system frequency define */
#define __IRC64M (IRC64M_VALUE) /* internal 64 MHz RC oscillator frequency */
#define __HXTAL (HXTAL_VALUE) /* high speed crystal oscillator frequency */
#define __LPIRC4M (LPIRC4M_VALUE) /* low power internal 4 MHz RC oscillator frequency */
#define __SYS_OSC_CLK (__IRC64M) /* main oscillator frequency */
#define VECT_TAB_OFFSET (uint32_t)0x00 /* vector table base offset */
#define RCU_APB4EN_SYSCFG (uint32_t)0x01 /* enable SYSCFG clk */
/* select a system clock by uncommenting the following line */
/* use IRC64M */
//#define __SYSTEM_CLOCK_IRC64M (__IRC64M)
//#define __SYSTEM_CLOCK_480M_PLL0_IRC64M (uint32_t)(480000000)
//#define __SYSTEM_CLOCK_600M_PLL0_IRC64M (uint32_t)(600000000)
/* use LPIRC4M */
//#define __SYSTEM_CLOCK_LPIRC4M (__LPIRC4M)
/* use HXTAL(CK_HXTAL = 25M) */
//#define __SYSTEM_CLOCK_HXTAL (__HXTAL)
//#define __SYSTEM_CLOCK_200M_PLL0_HXTAL (uint32_t)(200000000)
//#define __SYSTEM_CLOCK_400M_PLL0_HXTAL (uint32_t)(400000000)
//#define __SYSTEM_CLOCK_480M_PLL0_HXTAL (uint32_t)(480000000)
#define __SYSTEM_CLOCK_600M_PLL0_HXTAL (uint32_t)(600000000)
/*
Note: the power mode need to match the mcu selection and external power supply circuit.
according to the selected mcu and external power supply circuit to uncomment
the following macro SEL_PMU_SMPS_MODE.
*/
//#define SEL_PMU_SMPS_MODE PMU_LDO_SUPPLY
//#define SEL_PMU_SMPS_MODE PMU_DIRECT_SMPS_SUPPLY
//#define SEL_PMU_SMPS_MODE PMU_BYPASS
#define SEL_IRC64MDIV 0x00U
#define SEL_HXTAL 0x01U
#define SEL_LPIRC4M 0x02U
#define SEL_PLL0P 0x03U
#define PLL0PSC_REG_OFFSET 0U
#define PLL0N_REG_OFFSET 6U
#define PLL0P_REG_OFFSET 16U
#define PLL0Q_REG_OFFSET 0U
#define PLL0R_REG_OFFSET 24U
/* set the system clock frequency and declare the system clock configuration function */
#ifdef __SYSTEM_CLOCK_IRC64M
uint32_t SystemCoreClock = __SYSTEM_CLOCK_IRC64M;
static void system_clock_64m_irc64m(void);
#elif defined (__SYSTEM_CLOCK_480M_PLL0_IRC64M)
#define PLL0PSC 16U
#define PLL0N (120U - 1U)
#define PLL0P (1U - 1U)
#define PLL0Q (2U - 1U)
#define PLL0R (2U - 1U)
uint32_t SystemCoreClock = __SYSTEM_CLOCK_480M_PLL0_IRC64M;
static void system_clock_480m_irc64m(void);
#elif defined (__SYSTEM_CLOCK_600M_PLL0_IRC64M)
#define PLL0PSC 16U
#define PLL0N (150U - 1U)
#define PLL0P (1U - 1U)
#define PLL0Q (2U - 1U)
#define PLL0R (2U - 1U)
uint32_t SystemCoreClock = __SYSTEM_CLOCK_600M_PLL0_IRC64M;
static void system_clock_600m_irc64m(void);
#elif defined (__SYSTEM_CLOCK_LPIRC4M)
uint32_t SystemCoreClock = __SYSTEM_CLOCK_LPIRC4M;
static void system_clock_4m_lpirc4m(void);
#elif defined (__SYSTEM_CLOCK_HXTAL)
uint32_t SystemCoreClock = __SYSTEM_CLOCK_HXTAL;
static void system_clock_hxtal(void);
#elif defined (__SYSTEM_CLOCK_200M_PLL0_HXTAL)
#define PLL0PSC 5U
#define PLL0N (40U - 1U)
#define PLL0P (1U - 1U)
#define PLL0Q (2U - 1U)
#define PLL0R (2U - 1U)
uint32_t SystemCoreClock = __SYSTEM_CLOCK_200M_PLL0_HXTAL;
static void system_clock_200m_hxtal(void);
#elif defined (__SYSTEM_CLOCK_400M_PLL0_HXTAL)
#define PLL0PSC 5U
#define PLL0N (80U - 1U)
#define PLL0P (1U - 1U)
#define PLL0Q (2U - 1U)
#define PLL0R (2U - 1U)
uint32_t SystemCoreClock = __SYSTEM_CLOCK_400M_PLL0_HXTAL;
static void system_clock_400m_hxtal(void);
#elif defined (__SYSTEM_CLOCK_480M_PLL0_HXTAL)
#define PLL0PSC 5U
#define PLL0N (96U - 1U)
#define PLL0P (1U - 1U)
#define PLL0Q (2U - 1U)
#define PLL0R (2U - 1U)
uint32_t SystemCoreClock = __SYSTEM_CLOCK_480M_PLL0_HXTAL;
static void system_clock_480m_hxtal(void);
#elif defined (__SYSTEM_CLOCK_600M_PLL0_HXTAL)
#define PLL0PSC 5U
#define PLL0N (120U - 1U)
#define PLL0P (1U - 1U)
#define PLL0Q (2U - 1U)
#define PLL0R (2U - 1U)
uint32_t SystemCoreClock = __SYSTEM_CLOCK_600M_PLL0_HXTAL;
static void system_clock_600m_hxtal(void);
#endif /* __SYSTEM_CLOCK_IRC64M */
/* configure the system clock */
static void system_clock_config(void);
/*!
\brief setup the microcontroller system, initialize the system
\param[in] none
\param[out] none
\retval none
*/
void SystemInit(void)
{
/* FPU settings */
#if (__FPU_PRESENT == 1) && (__FPU_USED == 1U)
/* set CP10 and CP11 Full Access */
SCB->CPACR |= (uint32_t)((0x03U << 10U * 2U) | (0x03U << 11U * 2U));
#endif
/* enable IRC64M */
RCU_CTL |= RCU_CTL_IRC64MEN;
while(0U == (RCU_CTL & RCU_CTL_IRC64MSTB)) {
}
/* no TCM wait state */
RCU_APB4EN |= RCU_APB4EN_SYSCFG;
SYSCFG_SRAMCFG1 &= ~SYSCFG_SRAMCFG1_TCM_WAITSTATE;
RCU_CFG0 &= ~RCU_CFG0_SCS;
/* reset RCU */
/* reset HXTALEN, CKMEN, PLL0EN, PLL1EN, PLL2EN, PLLUSB0 and PLLUSB1 bits */
RCU_CTL &= ~(RCU_CTL_HXTALEN | RCU_CTL_CKMEN | RCU_CTL_PLL0EN | RCU_CTL_PLL1EN | RCU_CTL_PLL2EN | RCU_CTL_HXTALBPS);
RCU_ADDCTL1 &= ~(RCU_ADDCTL1_PLLUSBHS0EN | RCU_ADDCTL1_PLLUSBHS1EN | RCU_ADDCTL1_LPIRC4MEN);
/* reset CFG0, CFG1, CFG2, CFG3 registers */
RCU_CFG0 &= ~(RCU_CFG0_APB1PSC | RCU_CFG0_APB2PSC | RCU_CFG0_APB3PSC | RCU_CFG0_APB4PSC | RCU_CFG0_AHBPSC |
RCU_CFG0_I2C0SEL | RCU_CFG0_SCS | RCU_CFG0_RTCDIV);
RCU_CFG1 &= ~(RCU_CFG1_HPDFSEL | RCU_CFG1_TIMERSEL | RCU_CFG1_PERSEL |
RCU_CFG1_USART0SEL | RCU_CFG1_USART1SEL | RCU_CFG1_USART2SEL | RCU_CFG1_USART5SEL | RCU_CFG1_PLL2RDIV);
RCU_CFG2 &= ~(RCU_CFG2_HPDFASEL | RCU_CFG2_CKOUT0SEL | RCU_CFG2_CKOUT1SEL | RCU_CFG2_CKOUT0DIV | RCU_CFG2_CKOUT1DIV);
RCU_CFG3 &= ~(RCU_CFG3_ADC01SEL | RCU_CFG3_ADC2SEL
| RCU_CFG3_I2C3SEL | RCU_CFG3_I2C2SEL | RCU_CFG3_I2C1SEL);
RCU_CFG4 &= ~(RCU_CFG4_EXMCSEL);
RCU_CFG5 &= ~(RCU_CFG5_SPI0SEL | RCU_CFG5_SPI1SEL | RCU_CFG5_SPI2SEL |
RCU_CFG5_SPI3SEL | RCU_CFG5_SPI4SEL | RCU_CFG5_SPI5SEL);
/* disable all interrupts */
RCU_INT = 0x14FF0000U;
RCU_ADDINT = 0x00700000U;
/* reset all PLL0 parameter */
RCU_PLL0 = 0x01002020U;
RCU_PLL1 = 0x01012020U;
RCU_PLL2 = 0x01012020U;
RCU_PLLALL = 0x00000000U;
RCU_PLLADDCTL = 0x00010101U;
RCU_PLLUSBCFG = 0x00000000U;
RCU_PLL0FRA = 0x00000000U;
RCU_PLL1FRA = 0x00000000U;
RCU_PLL2FRA = 0x00000000U;
#if defined (SEL_PMU_SMPS_MODE)
/* power supply config */
pmu_smps_ldo_supply_config(SEL_PMU_SMPS_MODE);
#endif
/* configure system clock */
system_clock_config();
#ifdef VECT_TAB_SRAM
nvic_vector_table_set(NVIC_VECTTAB_RAM, VECT_TAB_OFFSET);
#else
nvic_vector_table_set(NVIC_VECTTAB_FLASH, VECT_TAB_OFFSET);
#endif
}
/*!
\brief configure the system clock
\param[in] none
\param[out] none
\retval none
*/
static void system_clock_config(void)
{
#ifdef __SYSTEM_CLOCK_IRC64M
system_clock_64m_irc64m();
#elif defined (__SYSTEM_CLOCK_480M_PLL0_IRC64M)
system_clock_480m_irc64m();
#elif defined (__SYSTEM_CLOCK_600M_PLL0_IRC64M)
system_clock_600m_irc64m();
#elif defined (__SYSTEM_CLOCK_LPIRC4M)
system_clock_4m_lpirc4m();
#elif defined (__SYSTEM_CLOCK_HXTAL)
system_clock_hxtal();
#elif defined (__SYSTEM_CLOCK_200M_PLL0_HXTAL)
system_clock_200m_hxtal();
#elif defined (__SYSTEM_CLOCK_400M_PLL0_HXTAL)
system_clock_400m_hxtal();
#elif defined (__SYSTEM_CLOCK_480M_PLL0_HXTAL)
system_clock_480m_hxtal();
#elif defined (__SYSTEM_CLOCK_600M_PLL0_HXTAL)
system_clock_600m_hxtal();
#endif /* __SYSTEM_CLOCK_IRC64M */
}
#ifdef __SYSTEM_CLOCK_IRC64M
/*!
\brief configure the system clock to 64M by IRC64M
\param[in] none
\param[out] none
\retval none
*/
static void system_clock_64m_irc64m(void)
{
uint32_t timeout = 0U;
uint32_t stab_flag = 0U;
/* enable IRC64M */
RCU_CTL |= RCU_CTL_IRC64MEN;
/* wait until IRC64M is stable or the startup time is longer than IRC64M_STARTUP_TIMEOUT */
do {
timeout++;
stab_flag = (RCU_CTL & RCU_CTL_IRC64MSTB);
} while((0U == stab_flag) && (IRC64M_STARTUP_TIMEOUT != timeout));
/* if fail */
if(0U == (RCU_CTL & RCU_CTL_IRC64MSTB)) {
while(1) {
}
}
/* AHB = SYSCLK / 1 */
RCU_CFG0 |= RCU_AHB_CKSYS_DIV1;
/* APB4 = AHB / 1 */
RCU_CFG0 |= RCU_APB4_CKAHB_DIV1;
/* APB3 = AHB / 1 */
RCU_CFG0 |= RCU_APB3_CKAHB_DIV1;
/* APB2 = AHB / 1 */
RCU_CFG0 |= RCU_APB2_CKAHB_DIV1;
/* APB1 = AHB / 1 */
RCU_CFG0 |= RCU_APB1_CKAHB_DIV1;
/* configure IRC64M div */
RCU_ADDCTL1 &= ~(RCU_ADDCTL1_IRC64MDIV);
RCU_ADDCTL1 |= RCU_IRC64M_DIV1;
/* select IRC64M as system clock */
RCU_CFG0 &= ~RCU_CFG0_SCS;
RCU_CFG0 |= RCU_CKSYSSRC_IRC64MDIV;
/* wait until IRC64M is selected as system clock */
while(RCU_SCSS_IRC64MDIV != (RCU_CFG0 & RCU_CFG0_SCSS)) {
}
}
#elif defined (__SYSTEM_CLOCK_480M_PLL0_IRC64M)
/*!
\brief configure the system clock to 480M by PLL0 which selects IRC64M as its clock source
\param[in] none
\param[out] none
\retval none
*/
static void system_clock_480m_irc64m(void)
{
uint32_t timeout = 0U;
uint32_t stab_flag = 0U;
/* enable IRC64M */
RCU_CTL |= RCU_CTL_IRC64MEN;
/* wait until IRC64M is stable or the startup time is longer than IRC64M_STARTUP_TIMEOUT */
do {
timeout++;
stab_flag = (RCU_CTL & RCU_CTL_IRC64MSTB);
} while((0U == stab_flag) && (IRC64M_STARTUP_TIMEOUT != timeout));
/* if fail */
if(0U == (RCU_CTL & RCU_CTL_IRC64MSTB)) {
while(1) {
}
}
/* insert TCM wait state at 480MHz */
RCU_APB4EN |= RCU_APB4EN_SYSCFG;
SYSCFG_SRAMCFG1 |= SYSCFG_SRAMCFG1_TCM_WAITSTATE;
/* IRC64M is already stable */
/* AHB = SYSCLK / 2 */
RCU_CFG0 |= RCU_AHB_CKSYS_DIV2;
/* APB4 = AHB / 2 */
RCU_CFG0 |= RCU_APB4_CKAHB_DIV2;
/* APB3 = AHB / 2 */
RCU_CFG0 |= RCU_APB3_CKAHB_DIV2;
/* APB2 = AHB / 1 */
RCU_CFG0 |= RCU_APB2_CKAHB_DIV1;
/* APB1 = AHB / 2 */
RCU_CFG0 |= RCU_APB1_CKAHB_DIV2;
/* PLL0 select IRC64MDIV, config IRC64MDIV as IRC64M, PLL0 input and output range */
RCU_ADDCTL1 &= ~(RCU_ADDCTL1_IRC64MDIV);
RCU_ADDCTL1 |= RCU_IRC64M_DIV1;
RCU_PLLALL &= ~(RCU_PLLALL_PLLSEL | RCU_PLLALL_PLL0VCOSEL | RCU_PLLALL_PLL0RNG);
RCU_PLLALL |= (RCU_PLLSRC_IRC64MDIV | RCU_PLL0RNG_4M_8M);
/* PLL0P = IRC64MDIV / 16 * 120 / 1 = 480 MHz */
RCU_PLL0 &= ~(RCU_PLL0_PLL0N | RCU_PLL0_PLL0PSC | RCU_PLL0_PLL0P | RCU_PLL0_PLL0R | RCU_PLL0_PLLSTBSRC);
RCU_PLL0 |= ((PLL0N << PLL0N_REG_OFFSET) | (PLL0PSC << PLL0PSC_REG_OFFSET) | (PLL0P << PLL0P_REG_OFFSET) | (PLL0R << PLL0R_REG_OFFSET));
RCU_PLLADDCTL &= ~(RCU_PLLADDCTL_PLL0Q);
RCU_PLLADDCTL |= (PLL0Q << PLL0Q_REG_OFFSET);
/* enable PLL0P, PLL0Q, PLL0R */
RCU_PLLADDCTL |= RCU_PLLADDCTL_PLL0PEN | RCU_PLLADDCTL_PLL0QEN | RCU_PLLADDCTL_PLL0REN;
/* enable PLL0 */
RCU_CTL |= RCU_CTL_PLL0EN;
/* wait until PLL0 is stable */
while(0U == (RCU_CTL & RCU_CTL_PLL0STB)) {
}
/* select PLL0 as system clock */
RCU_CFG0 &= ~RCU_CFG0_SCS;
RCU_CFG0 |= RCU_CKSYSSRC_PLL0P;
/* wait until PLL0 is selected as system clock */
while(RCU_SCSS_PLL0P != (RCU_CFG0 & RCU_CFG0_SCSS)) {
}
}
#elif defined (__SYSTEM_CLOCK_600M_PLL0_IRC64M)
/*!
\brief configure the system clock to 600M by PLL0 which selects IRC64M as its clock source
\param[in] none
\param[out] none
\retval none
*/
static void system_clock_600m_irc64m(void)
{
uint32_t timeout = 0U;
uint32_t stab_flag = 0U;
/* enable IRC64M */
RCU_CTL |= RCU_CTL_IRC64MEN;
/* wait until IRC64M is stable or the startup time is longer than IRC64M_STARTUP_TIMEOUT */
do {
timeout++;
stab_flag = (RCU_CTL & RCU_CTL_IRC64MSTB);
} while((0U == stab_flag) && (IRC64M_STARTUP_TIMEOUT != timeout));
/* if fail */
if(0U == (RCU_CTL & RCU_CTL_IRC64MSTB)) {
while(1) {
}
}
/* insert TCM wait state at 600MHz */
RCU_APB4EN |= RCU_APB4EN_SYSCFG;
SYSCFG_SRAMCFG1 |= SYSCFG_SRAMCFG1_TCM_WAITSTATE;
/* IRC64M is already stable */
/* AHB = SYSCLK / 2 */
RCU_CFG0 |= RCU_AHB_CKSYS_DIV2;
/* APB4 = AHB / 2 */
RCU_CFG0 |= RCU_APB4_CKAHB_DIV2;
/* APB3 = AHB / 2 */
RCU_CFG0 |= RCU_APB3_CKAHB_DIV2;
/* APB2 = AHB / 1 */
RCU_CFG0 |= RCU_APB2_CKAHB_DIV1;
/* APB1 = AHB / 2 */
RCU_CFG0 |= RCU_APB1_CKAHB_DIV2;
/* PLL0 select IRC64MDIV, config IRC64MDIV as IRC64M, PLL0 input and output range */
RCU_ADDCTL1 &= ~(RCU_ADDCTL1_IRC64MDIV);
RCU_ADDCTL1 |= RCU_IRC64M_DIV1;
RCU_PLLALL &= ~(RCU_PLLALL_PLLSEL | RCU_PLLALL_PLL0VCOSEL | RCU_PLLALL_PLL0RNG);
RCU_PLLALL |= (RCU_PLLSRC_IRC64MDIV | RCU_PLL0RNG_4M_8M);
/* PLL0P = IRC64MDIV / 16 * 150 / 1 = 600 MHz */
RCU_PLL0 &= ~(RCU_PLL0_PLL0N | RCU_PLL0_PLL0PSC | RCU_PLL0_PLL0P | RCU_PLL0_PLL0R | RCU_PLL0_PLLSTBSRC);
RCU_PLL0 |= ((PLL0N << PLL0N_REG_OFFSET) | (PLL0PSC << PLL0PSC_REG_OFFSET) | (PLL0P << PLL0P_REG_OFFSET) | (PLL0R << PLL0R_REG_OFFSET));
RCU_PLLADDCTL &= ~(RCU_PLLADDCTL_PLL0Q);
RCU_PLLADDCTL |= (PLL0Q << PLL0Q_REG_OFFSET);
/* enable PLL0P, PLL0Q, PLL0R */
RCU_PLLADDCTL |= RCU_PLLADDCTL_PLL0PEN | RCU_PLLADDCTL_PLL0QEN | RCU_PLLADDCTL_PLL0REN;
/* enable PLL0 */
RCU_CTL |= RCU_CTL_PLL0EN;
/* wait until PLL0 is stable */
while(0U == (RCU_CTL & RCU_CTL_PLL0STB)) {
}
/* select PLL0 as system clock */
RCU_CFG0 &= ~RCU_CFG0_SCS;
RCU_CFG0 |= RCU_CKSYSSRC_PLL0P;
/* wait until PLL0 is selected as system clock */
while(RCU_SCSS_PLL0P != (RCU_CFG0 & RCU_CFG0_SCSS)) {
}
}
#elif defined (__SYSTEM_CLOCK_LPIRC4M)
/*!
\brief configure the system clock to LPIRC4M
\param[in] none
\param[out] none
\retval none
*/
static void system_clock_4m_lpirc4m(void)
{
uint32_t timeout = 0U;
uint32_t stab_flag = 0U;
/* enable LPIRC4M */
RCU_ADDCTL1 |= RCU_ADDCTL1_LPIRC4MEN;
/* wait until LPIRC4M is stable or the startup time is longer than LPIRC4M_STARTUP_TIMEOUT */
do {
timeout++;
stab_flag = (RCU_ADDCTL1 & RCU_ADDCTL1_LPIRC4MSTB);
} while((0U == stab_flag) && (LPIRC4M_STARTUP_TIMEOUT != timeout));
/* if fail */
if(0U == (RCU_ADDCTL1 & RCU_ADDCTL1_LPIRC4MSTB)) {
while(1) {
}
}
/* LPIRC4M is stable */
/* AHB = SYSCLK / 1*/
RCU_CFG0 |= RCU_AHB_CKSYS_DIV1;
/* APB4 = AHB / 1 */
RCU_CFG0 |= RCU_APB4_CKAHB_DIV1;
/* APB3 = AHB / 1 */
RCU_CFG0 |= RCU_APB3_CKAHB_DIV1;
/* APB2 = AHB / 1 */
RCU_CFG0 |= RCU_APB2_CKAHB_DIV1;
/* APB1 = AHB / 1 */
RCU_CFG0 |= RCU_APB1_CKAHB_DIV1;
/* select LPIRC4M as system clock */
RCU_CFG0 &= ~RCU_CFG0_SCS;
RCU_CFG0 |= RCU_CKSYSSRC_LPIRC4M;
/* wait until LPIRC4M is selected as system clock */
while(RCU_SCSS_LPIRC4M != (RCU_CFG0 & RCU_CFG0_SCSS)) {
}
}
#elif defined (__SYSTEM_CLOCK_HXTAL)
/*!
\brief configure the system clock to HXTAL
\param[in] none
\param[out] none
\retval none
*/
static void system_clock_hxtal(void)
{
uint32_t timeout = 0U;
uint32_t stab_flag = 0U;
/* enable HXTAL */
RCU_CTL |= RCU_CTL_HXTALEN;
/* wait until HXTAL is stable or the startup time is longer than HXTAL_STARTUP_TIMEOUT */
do {
timeout++;
stab_flag = (RCU_CTL & RCU_CTL_HXTALSTB);
} while((0U == stab_flag) && (HXTAL_STARTUP_TIMEOUT != timeout));
/* if fail */
if(0U == (RCU_CTL & RCU_CTL_HXTALSTB)) {
while(1) {
}
}
/* HXTAL is stable */
/* AHB = SYSCLK / 1*/
RCU_CFG0 |= RCU_AHB_CKSYS_DIV1;
/* APB4 = AHB / 1 */
RCU_CFG0 |= RCU_APB4_CKAHB_DIV1;
/* APB3 = AHB / 1 */
RCU_CFG0 |= RCU_APB3_CKAHB_DIV1;
/* APB2 = AHB / 1 */
RCU_CFG0 |= RCU_APB2_CKAHB_DIV1;
/* APB1 = AHB / 1 */
RCU_CFG0 |= RCU_APB1_CKAHB_DIV1;
/* select HXTAL as system clock */
RCU_CFG0 &= ~RCU_CFG0_SCS;
RCU_CFG0 |= RCU_CKSYSSRC_HXTAL;
/* wait until HXTAL is selected as system clock */
while(RCU_SCSS_HXTAL != (RCU_CFG0 & RCU_CFG0_SCSS)) {
}
}
#elif defined (__SYSTEM_CLOCK_200M_PLL0_HXTAL)
/*!
\brief configure the system clock to 200M by PLL0 which selects HXTAL as its clock source
\param[in] none
\param[out] none
\retval none
*/
static void system_clock_200m_hxtal(void)
{
uint32_t timeout = 0U;
uint32_t stab_flag = 0U;
/* enable HXTAL */
RCU_CTL |= RCU_CTL_HXTALEN;
/* wait until HXTAL is stable or the startup time is longer than HXTAL_STARTUP_TIMEOUT */
do {
timeout++;
stab_flag = (RCU_CTL & RCU_CTL_HXTALSTB);
} while((0U == stab_flag) && (HXTAL_STARTUP_TIMEOUT != timeout));
/* if fail */
if(0U == (RCU_CTL & RCU_CTL_HXTALSTB)) {
while(1) {
}
}
/* HXTAL is stable */
/* AHB = SYSCLK / 1 */
RCU_CFG0 |= RCU_AHB_CKSYS_DIV1;
/* APB4 = AHB / 2 */
RCU_CFG0 |= RCU_APB4_CKAHB_DIV2;
/* APB3 = AHB / 2 */
RCU_CFG0 |= RCU_APB3_CKAHB_DIV2;
/* APB2 = AHB / 1 */
RCU_CFG0 |= RCU_APB2_CKAHB_DIV1;
/* APB1 = AHB / 2 */
RCU_CFG0 |= RCU_APB1_CKAHB_DIV2;
/* PLL0 select HXTAL, configure PLL0 input and output range */
RCU_PLLALL &= ~(RCU_PLLALL_PLLSEL | RCU_PLLALL_PLL0VCOSEL | RCU_PLLALL_PLL0RNG);
RCU_PLLALL |= (RCU_PLLSRC_HXTAL | RCU_PLLALL_PLL0VCOSEL | RCU_PLL0RNG_4M_8M);
/* PLL0P = HXTAL / 5 * 40 = 200 MHz */
RCU_PLL0 &= ~(RCU_PLL0_PLL0N | RCU_PLL0_PLL0PSC | RCU_PLL0_PLL0P | RCU_PLL0_PLL0R | RCU_PLL0_PLLSTBSRC);
RCU_PLL0 |= ((PLL0N << PLL0N_REG_OFFSET) | (PLL0PSC << PLL0PSC_REG_OFFSET) | (PLL0P << PLL0P_REG_OFFSET) | (PLL0R << PLL0R_REG_OFFSET));
RCU_PLLADDCTL &= ~(RCU_PLLADDCTL_PLL0Q);
RCU_PLLADDCTL |= (PLL0Q << PLL0Q_REG_OFFSET);
/* enable PLL0P, PLL0Q, PLL0R */
RCU_PLLADDCTL |= RCU_PLLADDCTL_PLL0PEN | RCU_PLLADDCTL_PLL0QEN | RCU_PLLADDCTL_PLL0REN;
/* enable PLL0 */
RCU_CTL |= RCU_CTL_PLL0EN;
/* wait until PLL0 is stable */
while(0U == (RCU_CTL & RCU_CTL_PLL0STB)) {
}
/* select PLL0 as system clock */
RCU_CFG0 &= ~RCU_CFG0_SCS;
RCU_CFG0 |= RCU_CKSYSSRC_PLL0P;
/* wait until PLL0 is selected as system clock */
while(RCU_SCSS_PLL0P != (RCU_CFG0 & RCU_CFG0_SCSS)) {
}
}
#elif defined (__SYSTEM_CLOCK_400M_PLL0_HXTAL)
/*!
\brief configure the system clock to 400M by PLL0 which selects HXTAL as its clock source
\param[in] none
\param[out] none
\retval none
*/
static void system_clock_400m_hxtal(void)
{
uint32_t timeout = 0U;
uint32_t stab_flag = 0U;
/* enable HXTAL */
RCU_CTL |= RCU_CTL_HXTALEN;
/* wait until HXTAL is stable or the startup time is longer than HXTAL_STARTUP_TIMEOUT */
do {
timeout++;
stab_flag = (RCU_CTL & RCU_CTL_HXTALSTB);
} while((0U == stab_flag) && (HXTAL_STARTUP_TIMEOUT != timeout));
/* if fail */
if(0U == (RCU_CTL & RCU_CTL_HXTALSTB)) {
while(1) {
}
}
/* insert TCM wait state at 400MHz */
RCU_APB4EN |= RCU_APB4EN_SYSCFG;
SYSCFG_SRAMCFG1 |= SYSCFG_SRAMCFG1_TCM_WAITSTATE;
/* HXTAL is stable */
/* AHB = SYSCLK / 1 */
RCU_CFG0 |= RCU_AHB_CKSYS_DIV2;
/* APB4 = AHB / 2 */
RCU_CFG0 |= RCU_APB4_CKAHB_DIV2;
/* APB3 = AHB / 2 */
RCU_CFG0 |= RCU_APB3_CKAHB_DIV2;
/* APB2 = AHB / 1 */
RCU_CFG0 |= RCU_APB2_CKAHB_DIV1;
/* APB1 = AHB / 2 */
RCU_CFG0 |= RCU_APB1_CKAHB_DIV2;
/* PLL0 select HXTAL, configure PLL0 input and output range */
RCU_PLLALL &= ~(RCU_PLLALL_PLLSEL | RCU_PLLALL_PLL0VCOSEL | RCU_PLLALL_PLL0RNG);
RCU_PLLALL |= (RCU_PLLSRC_HXTAL | RCU_PLLALL_PLL0VCOSEL | RCU_PLL0RNG_4M_8M);
/* PLL0P = HXTAL / 5 * 80 = 400 MHz */
RCU_PLL0 &= ~(RCU_PLL0_PLL0N | RCU_PLL0_PLL0PSC | RCU_PLL0_PLL0P | RCU_PLL0_PLL0R | RCU_PLL0_PLLSTBSRC);
RCU_PLL0 |= ((PLL0N << PLL0N_REG_OFFSET) | (PLL0PSC << PLL0PSC_REG_OFFSET) | (PLL0P << PLL0P_REG_OFFSET) | (PLL0R << PLL0R_REG_OFFSET));
RCU_PLLADDCTL &= ~(RCU_PLLADDCTL_PLL0Q);
RCU_PLLADDCTL |= (PLL0Q << PLL0Q_REG_OFFSET);
/* enable PLL0P, PLL0Q, PLL0R */
RCU_PLLADDCTL |= RCU_PLLADDCTL_PLL0PEN | RCU_PLLADDCTL_PLL0QEN | RCU_PLLADDCTL_PLL0REN;
/* enable PLL */
RCU_CTL |= RCU_CTL_PLL0EN;
/* wait until PLL0 is stable */
while(0U == (RCU_CTL & RCU_CTL_PLL0STB)) {
}
/* select PLL0 as system clock */
RCU_CFG0 &= ~RCU_CFG0_SCS;
RCU_CFG0 |= RCU_CKSYSSRC_PLL0P;
/* wait until PLL0 is selected as system clock */
while(RCU_SCSS_PLL0P != (RCU_CFG0 & RCU_CFG0_SCSS)) {
}
}
#elif defined (__SYSTEM_CLOCK_480M_PLL0_HXTAL)
/*!
\brief configure the system clock to 480M by PLL0 which selects HXTAL as its clock source
\param[in] none
\param[out] none
\retval none
*/
static void system_clock_480m_hxtal(void)
{
uint32_t timeout = 0U;
uint32_t stab_flag = 0U;
/* enable HXTAL */
RCU_CTL |= RCU_CTL_HXTALEN;
/* wait until HXTAL is stable or the startup time is longer than HXTAL_STARTUP_TIMEOUT */
do {
timeout++;
stab_flag = (RCU_CTL & RCU_CTL_HXTALSTB);
} while((0U == stab_flag) && (HXTAL_STARTUP_TIMEOUT != timeout));
/* if fail */
if(0U == (RCU_CTL & RCU_CTL_HXTALSTB)) {
while(1) {
}
}
/* insert TCM wait state at 480MHz */
RCU_APB4EN |= RCU_APB4EN_SYSCFG;
SYSCFG_SRAMCFG1 |= SYSCFG_SRAMCFG1_TCM_WAITSTATE;
/* HXTAL is stable */
/* AHB = SYSCLK / 2 */
RCU_CFG0 |= RCU_AHB_CKSYS_DIV2;
/* APB4 = AHB / 2 */
RCU_CFG0 |= RCU_APB4_CKAHB_DIV2;
/* APB3 = AHB / 2 */
RCU_CFG0 |= RCU_APB3_CKAHB_DIV2;
/* APB2 = AHB / 1 */
RCU_CFG0 |= RCU_APB2_CKAHB_DIV1;
/* APB1 = AHB / 2 */
RCU_CFG0 |= RCU_APB1_CKAHB_DIV2;
/* PLL select HXTAL, configure PLL input and output range */
RCU_PLLALL &= ~(RCU_PLLALL_PLLSEL | RCU_PLLALL_PLL0VCOSEL | RCU_PLLALL_PLL0RNG);
RCU_PLLALL |= (RCU_PLLSRC_HXTAL | RCU_PLL0RNG_4M_8M);
/* PLL0P = HXTAL / 5 * 96 = 480 MHz */
RCU_PLL0 &= ~(RCU_PLL0_PLL0N | RCU_PLL0_PLL0PSC | RCU_PLL0_PLL0P | RCU_PLL0_PLL0R | RCU_PLL0_PLLSTBSRC);
RCU_PLL0 |= ((PLL0N << PLL0N_REG_OFFSET) | (PLL0PSC << PLL0PSC_REG_OFFSET) | (PLL0P << PLL0P_REG_OFFSET) | (PLL0R << PLL0R_REG_OFFSET));
RCU_PLLADDCTL &= ~(RCU_PLLADDCTL_PLL0Q);
RCU_PLLADDCTL |= (PLL0Q << PLL0Q_REG_OFFSET);
/* enable PLL0P, PLL0Q, PLL0R */
RCU_PLLADDCTL |= RCU_PLLADDCTL_PLL0PEN | RCU_PLLADDCTL_PLL0QEN | RCU_PLLADDCTL_PLL0REN;
/* enable PLL0 */
RCU_CTL |= RCU_CTL_PLL0EN;
/* wait until PLL0 is stable */
while(0U == (RCU_CTL & RCU_CTL_PLL0STB)) {
}
/* select PLL0 as system clock */
RCU_CFG0 &= ~RCU_CFG0_SCS;
RCU_CFG0 |= RCU_CKSYSSRC_PLL0P;
/* wait until PLL0 is selected as system clock */
while(RCU_SCSS_PLL0P != (RCU_CFG0 & RCU_CFG0_SCSS)) {
}
}
#elif defined (__SYSTEM_CLOCK_600M_PLL0_HXTAL)
/*!
\brief configure the system clock to 600M by PLL0 which selects HXTAL as its clock source
\param[in] none
\param[out] none
\retval none
*/
static void system_clock_600m_hxtal(void)
{
uint32_t timeout = 0U;
uint32_t stab_flag = 0U;
/* enable HXTAL */
RCU_CTL |= RCU_CTL_HXTALEN;
/* wait until HXTAL is stable or the startup time is longer than HXTAL_STARTUP_TIMEOUT */
do {
timeout++;
stab_flag = (RCU_CTL & RCU_CTL_HXTALSTB);
} while((0U == stab_flag) && (HXTAL_STARTUP_TIMEOUT != timeout));
/* if fail */
if(0U == (RCU_CTL & RCU_CTL_HXTALSTB)) {
while(1) {
}
}
/* insert TCM wait state at 600MHz */
RCU_APB4EN |= RCU_APB4EN_SYSCFG;
SYSCFG_SRAMCFG1 |= SYSCFG_SRAMCFG1_TCM_WAITSTATE;
/* HXTAL is stable */
/* AHB = SYSCLK / 2 */
RCU_CFG0 |= RCU_AHB_CKSYS_DIV2;
/* APB4 = AHB / 2 */
RCU_CFG0 |= RCU_APB4_CKAHB_DIV2;
/* APB3 = AHB / 2 */
RCU_CFG0 |= RCU_APB3_CKAHB_DIV2;
/* APB2 = AHB / 1 */
RCU_CFG0 |= RCU_APB2_CKAHB_DIV1;
/* APB1 = AHB / 2 */
RCU_CFG0 |= RCU_APB1_CKAHB_DIV2;
/* PLL select HXTAL, configure PLL input and output range */
RCU_PLLALL &= ~(RCU_PLLALL_PLLSEL | RCU_PLLALL_PLL0VCOSEL | RCU_PLLALL_PLL0RNG);
RCU_PLLALL |= (RCU_PLLSRC_HXTAL | RCU_PLL0RNG_4M_8M);
/* PLL0P = HXTAL / 5 * 120 = 600 MHz */
RCU_PLL0 &= ~(RCU_PLL0_PLL0N | RCU_PLL0_PLL0PSC | RCU_PLL0_PLL0P | RCU_PLL0_PLL0R | RCU_PLL0_PLLSTBSRC);
RCU_PLL0 |= ((PLL0N << PLL0N_REG_OFFSET) | (PLL0PSC << PLL0PSC_REG_OFFSET) | (PLL0P << PLL0P_REG_OFFSET) | (PLL0R << PLL0R_REG_OFFSET));
RCU_PLLADDCTL &= ~(RCU_PLLADDCTL_PLL0Q);
RCU_PLLADDCTL |= (PLL0Q << PLL0Q_REG_OFFSET);
/* enable PLL0P, PLL0Q, PLL0R */
RCU_PLLADDCTL |= RCU_PLLADDCTL_PLL0PEN | RCU_PLLADDCTL_PLL0QEN | RCU_PLLADDCTL_PLL0REN;
/* enable PLL0 */
RCU_CTL |= RCU_CTL_PLL0EN;
/* wait until PLL0 is stable */
while(0U == (RCU_CTL & RCU_CTL_PLL0STB)) {
}
/* select PLL0 as system clock */
RCU_CFG0 &= ~RCU_CFG0_SCS;
RCU_CFG0 |= RCU_CKSYSSRC_PLL0P;
/* wait until PLL0 is selected as system clock */
while(RCU_SCSS_PLL0P != (RCU_CFG0 & RCU_CFG0_SCSS)) {
}
}
#endif /* __SYSTEM_CLOCK_IRC64M */
/*!
\brief update the SystemCoreClock with current core clock retrieved from cpu registers
\param[in] none
\param[out] none
\retval none
*/
void SystemCoreClockUpdate(void)
{
uint32_t sws = 0U;
uint32_t irc64div = 0U;
uint32_t pllpsc = 0U, plln = 0U, pllp = 0U, pllsel = 0U;
sws = GET_BITS(RCU_CFG0, 2, 3);
switch(sws) {
/* IRC64M is selected as CK_SYS */
case SEL_IRC64MDIV:
irc64div = (1U << GET_BITS(RCU_ADDCTL1, 16, 17));
SystemCoreClock = IRC64M_VALUE / irc64div;
break;
/* HXTAL is selected as CK_SYS */
case SEL_LPIRC4M:
SystemCoreClock = LPIRC4M_VALUE;
break;
/* HXTAL is selected as CK_SYS */
case SEL_HXTAL:
SystemCoreClock = HXTAL_VALUE;
break;
/* PLL0P is selected as CK_SYS */
case SEL_PLL0P:
/* get the value of PLL0PSC[0,5], PLL0N[6,14], PLL0P[16,22] */
pllpsc = GET_BITS(RCU_PLL0, 0, 5);
plln = GET_BITS(RCU_PLL0, 6, 14) + 1U;
pllp = GET_BITS(RCU_PLL0, 16, 22) + 1U;
/* PLL clock source selection, HXTAL or IRC64M_VALUE or LPIRC4M_VALUE */
pllsel = GET_BITS(RCU_PLLALL, 16, 17);
if(0U == pllsel) {
irc64div = (1U << GET_BITS(RCU_ADDCTL1, 16, 17));
SystemCoreClock = (IRC64M_VALUE / irc64div / pllpsc) * plln / pllp;
} else if(1U == pllsel) {
SystemCoreClock = (LPIRC4M_VALUE / pllpsc) * plln / pllp;
} else {
SystemCoreClock = (HXTAL_VALUE / pllpsc) * plln / pllp;
}
break;
default:
/* should not be here */
break;
}
}
#ifdef __FIRMWARE_VERSION_DEFINE
/*!
\brief get firmware version
\param[in] none
\param[out] none
\retval firmware version
*/
uint32_t gd32h75e_firmware_version_get(void)
{
return __GD32H75E_STDPERIPH_VERSION;
}
#endif /* __FIRMWARE_VERSION_DEFINE */